Construção e calibração de um inclinômetro para uso em tratores agrícolas como instrumento de segurança

The tractors are the main potency source, for the traction of tillage equipments and their use are increasing more and more in Brazilian agriculture. In spite of the great technological progress the increase of the number of agricultural tractors brought positive aspects and some negative, among these last ones it stands out the appearance of a new source of work accidents, which importance is given by the physical damages caused to the operator. Therefore the objective of this work was to project and develop an inclinometer, which indicates the inclination of the land, as safety sensor for agricultural tractors to avoid lateral hollovers, through a resonant sign, for the operator and the machine preservation. The built and evaluated inclinometer showed to be efficient for inclination indication of different areas during field operations with agricultural tractors, small angle oscillation and enough answer time to help operators to take decisions in imminence situation of lateral machine hollovers.

Projeto ergonômico de assento para tratores, utilizando-se dos recursos da computação gráfica

Regardless its power rate, the tractors are the most used source in operations of tillage. Thus, due to the expansion of cultivated areas and the need of striking application of technologies to meet the advance of agribusiness, it has been shown that these machines are concentrated during the work periods, the physical and mechanical actions to perform the activity. So, it's possible to realize that the time of physical exposures and the operational decision-making are related with the job station comfort. In regard to what was mentioned, this paper's main objective is to design an ergonomically viable seat to furnish the operational requirements of the tractor driver, using the new CAD / CAE technologies in order to provide optimal comfort to the relationship between human being and machines.

Conformidade ergonômica dos controles no posto de trabalho do operador de trator: estudo de caso NH 7630

This article discusses an ergonomic analysis of the controls used by tractor operators, covering their positions in relation to the casing of your job. Was performed an assessment of the controls of the job of a model NH 7630 tractor average power of 74 kW (100 CV), using the norms of the ABNT. With this screening could detect the positive and negative. Then was accomplished an analytical study of the controls. Evaluation results show that some controls of tractors have errors evaluated in relation to NBR/ ISO 6682.

Comparativo ergonômico de duas metododologias para aquisição de coordenadas tridimensionais do posto de trabalho do operador de trato

This research aimed to the comparison between two methods for obtaining three-dimensional coordinates of the controls of the upper limbs of the job of the tractor operator. The methods used were based on NBR / NM / ISO 5353 - Road machines, tractors and agricultural and forestry machinery – Reference point of the seat. The first method used follows the principles recommended by the standard NBR/NM/ISO/5353 The second method is an adaptation of this standard with the introduction of a laser measuring equipment developed by Silva (2009). The results were compared statistically to evaluate differences between the methodological processes involved. In this research, data was collected thought a brand new tractor Massey Ferguson model MF 292, awarded by the dealership from Londrina. The results have shown a considerable variation between the traditional measurement process and the laser measuring. It must be considered that this variation can be used to calibrate the tractor controls positioning, therefore the tractor is not in accordance to ABNT.

O circuito espacial produtivo dos fertilizantes no território brasileiro

This paper has two main objective the study of the productive space circuit of fertilizers in Brazil. For this, we study the company's operations Vale Fertilizers SA More specifically, the production and consumption of fertilizers in Brazil. In the current globalization the Brazilian countryside know new ways of doing (SANTOS, 1994). This, with less roughness, adopts the Green Revolution package, and introduces inputs to the soil, such as seeders, combines, tractors, herbicides, fungicides and fertilizers (Santos & Silveira, 2001). The examination of the Brazilian case as the agricultural modernization reveals the great vulnerability of modern agricultural regions in the face of globalizing modernization (Santos, 2000: 92). The places that receive capital reproduction of imperatives gain a new medium, is the formation of informational scientific technical means, are the bright spots corresponding to other places (Santos, 1994). Thus, the productive circuits are no longer confined to the environment, but establish connections with distant places (Santos, 1986; Frederick & CASTILLO, 2004). What's more, the policy is now made in the market (Santos, 2000, p.67) and the adoption by the Brazilian government's neoliberal policies, the Brazilian state-owned companies related to fertilizer production circuit are privatized, thereby Brazil makes It is further more dependent on inputs used in the field, including fertilizers

Influência de Lactobacillus rhamnosus na patogenicidade e na expressão de genes de virulência de Candida albicans: estudo in vitro e in vivo

Pós-graduação em Biopatologia Bucal - ICT

Consumo de combustível de um trator agrícola em função do tipo de soloe da pressão de inflação nos pneus utilizando o equipamento canteirador

Agricultural mechanization improved the efficiency of field operations by providing an increase in crop production. The intensified mechanization, however, has led to higher energy use mainly in the area of fuel consumption. The objective of this study was to compare the fuel consumption of tractors using two different tire pressures for two different types of soil during tillage with irrigated cotton in semi-arid regions. These tests were performed at the Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona with a Case 4x2 TDA 88kW equipped with an autopilot system. The results showed lower fuel consumption using a tire pressure of 124 kPa on sandy clay loan soil.

Consumo de combustível de um trator agrícola no preparo do solo para a cultura do algodão irrigado em função da pressão de inflação nos pneus

Currently, the efficiency in field operations and the increased productivity of crops is only possible with the use of agricultural machinery and equipment. This intensification of mechanized activities in agriculture, however, led to higher energy costs on farms mainly in the fuel consumption of agricultural tractors. The objective was to compare the fuel consumption of a tractor on tillage operations for irrigated cotton in semi-arid region varying two tire inflation pressures. The tests were conducted in Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona using a 4x2 TDA Case tractor equipped with a 88kw autopilot system. The results showed lower values in the hourly fuel consumption by using the minimum tire inflation pressure of 124 kPa for all tillage equipment used.

Determinação do rendimento na barra de tração de tratores agrícolas com tração dianteira auxiliar (4X2 TDA)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do desgaste das garras dos pneus e das condições superficiais do solo nas operações de campo de um trator agrícola

The objective of this work was to compare the performance of a tractor equipped with used and new bias-ply tires (63.4% and 41.2%, front and rear tire waste, respectively), in three surface conditions: tillage soil, vegetal covered soil and firm soil. Field data were collected to calculate: forward speed, front and rear slippage tires, drawbar pull, available power at drawbar bar and fuel consumption. Results showed that both, tires and soil conditions, changed tractor capacity on developing drawbar traction. The worst performance was observed on tillage soil. The best performance of the tractor was observed at firm soil track. On the track with tilled soil, results showed that the forward speed was the lowest among the three soil conditions due to the front and rear slippage tires which was higher than vegetal covered and firm soil tracks. Fuel consumption results showed higher values on tilled tracks when compared with firm and vegetal covered tracks. The fuel consumption levels evaluated on bias-ply tires lead to significant changes on tractor’s performance at tilled soil, indicating that, at this condition, it’s necessary to replace the used tires by new tires. For vegetal covered soil operations, and also on firm soil conditions, used tires, at studied levels, indicated that these tires might still be used without tractor performance changing.

Potencial do controle biológico para o controle de Pseudoplusia includens (Walker, 1857) e Anticarsia gemmatalis Hubner, 1818 (Lepidoptera: Noctuidae) em soja

The soybean (Glycine max) is of great importance to national economic scenario being a major Brazilian agribusiness products. In most regions, the caterpillar-of-soy (Anticarsia gemmatalis) and caterpillar-false-Medideira (Pseudoplusia includes), act as defoliators, with the highest incidence, usually during the growing season, until the end of flowering, and thus causing a significant reduction in the production, which requires control measures. Due to market demands and the large external environmental awareness exists today, the methods of ecological management have been highlighted in modern agriculture. The use of chemical insecticides, besides being harmful to the environment and man, is, in most cases, the high cost to the farmer. The biological pest control using natural enemies can be used as an alternative control method. Thus this literature review is intended to provide the updated information about these pests and biological control as an alternative form of control, as well as one more tool in the integrated pest of soybean.

Relação entre risco de erosão e distância de camalhões em estradas florestais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cartas de controle para gerenciamento de operações agrícolas mecanizadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Trichogramma pretiosum parasitism and dispersal capacity: a basis for developing biological control programs for soybean caterpillars

In order to succeed in biological control programs, not only is it crucial to understand the number of natural enemies to be released but also on how many sites per area this releasing must be performed. These variables might differ deeply among egg parasitoid species and crops worked. Therefore, these trials were carried out to evaluate the parasitism (%) in eggs of Anticarsia gemmatalis and Pseudoplusia includens after the release of different densities of the egg parasitoid Trichogramma pretiosum. Field dispersal was also studied, in order to determine appropriate recommendations for the release of this parasitoid in soybean fields. The regression analysis between parasitism (%) and densities of the parasitoid indicated a quadratic effect for both A. gemmatalis and P. includens. The maximum parasitism within 24 h after the release was reached with densities of 25.6 and 51.2 parasitoids per host egg, respectively, for the two pests. Parasitism of T. pretiosum in eggs of P. includens decreased linearly as the distance of the pest eggs from the parasitoid release sites increased. For P. includens, the mean radius of T. pretiosum action and the area of parasitoid dispersal in the soybean crop were 8.01 m and 85.18 m(2), respectively. We conclude that for a successful biological control program of lepidopteran pests using T. pretiosum in soybean fields, a density of 25.6 parasitoids per host egg, divided into 117 sites per hectare, should be used.

Assessment of the high-dose concept and level of control provided by MON 87701 x MON 89788 soybean against Anticarsia gemmatalis and Pseudoplusia includens (Lepidoptera: Noctuidae) in Brazil

BACKGROUND: Genetically modified MON 87701 X MON 89788 soybean (Glycine max), which expresses the Cry1Ac and EPSP-synthase proteins, has been registered for commercial use in Brazil. To develop an Insect Resistance Management (IRM) program for this event, laboratory and field studies were conducted to assess the high-dose concept and level of control it provides against Anticarsia gemmatalis and Pseudoplusia includens. RESULTS: The purified Cry1Ac protein was more active against A. gemmatalis [LC50 (FL 95%) = 0.23 (0.150.34) mu g Cry1Ac mL-1 diet] than P. includens [LC50 (FL 95%) = 3.72 (2.654.86) mu g Cry1Ac mL-1 diet]. In bioassays with freeze-dried MON 87701X MON 89788 soybean tissue diluted 25 times in an artificial diet, there was 100% mortality of A. gemmatalis and up to 95.79% mortality for P. includens. In leaf-disc bioassays and under conditions of high artificial infestation in the greenhouse and natural infestation in the field, MON 87701X MON 89788 soybean showed a high level of efficacy against both target pests. CONCLUSIONS: The MON 87701X MON 89788 soybean provides a high level of control against A. gemmatalis and P. includes, but a high-dose event only to A. gemmatalis. Copyright (c) 2012 Society of Chemical Industry