Characterization of polyamine oxidase from the aquatic nitrogen-fixing fern Azolla imbricata

Biochemical properties of a polyamine oxidase (PAO; EC 1.5.3.3) purified from the aquatic nitrogen-fixing fern Azolla imbricata (Roxb.) Nak. were studied. The native molecular mass of the enzyme estimated by Sephadex G 200 get filtration was 66.2 kDa. SDS-PAGE gave a single protein band corresponding to a molecular mass of 65.5 kDa. The light yellow enzyme had absorption maxima at 278, 372 and 454 nm with 1 mol FAD per mole enzyme molecule as its cofactor. The PAO was active on both the triamine Spd and the tetraamine Spm as substrates. However, it was inactive on the diamines Put and Cad. It had a pH optimum of 6.5 for both Spd and Spm. The K-m(S) for Spd and Spm were 6.71 x 10(-2) and 1.13 x 10(-1) nM, respectively. Pre-incubation with 10 mM of K+ (KCl), Ca2(+) (CaCl2) or Mg2+ (MgCl2) had no effect on PAO activity. However, 10 mM Cu2+ (CuCl2), Mn2+ (MnCl2) and Fe2+ (FeSO4) inhibited enzyme activity by 37%, 43% and 58%, respectively. The metal chelator EDTA (10 mM), the carbonyl reagent hydroxylamine (0.5 mM) and the sulfhydryl reagent p-chloro-mercuribenzoate (0.5 mM) had no effect on PAO activity. (c) 2005 Elsevier Ireland Ltd. All rights reserved.

Screening, characterization and flocculating property of carbohydrate polymer from newly isolated Enterobacter cloacae WD7

A total of 188 carbohydrate polymer-producing bacterial strains were isolated from recycled sludge of five seafood processing plants. Among three selected isolates, identified as Enterobacter cloacae WD7, Enterobacter agglomerans WD50 and Pseudomonas alcaligenes WD22. E. cloacae WD7 generated a viscous culture broth exhibiting the highest flocculating activity and a crude polymer yield of 2.27 g/L after 3 days cultivation. Partial purification of this polymer was performed by precipitation with 95% ethanol, dialysis and freeze-drying. It was characterized as an acidic heteropolysaccharide, composed of neutral sugars (29.4%), uronic acids (14.2%) and amino sugars (0.93%). The functional group analysis by FT-IR spectroscopy showed the presence of hydroxyl, carboxyl, carbonyl and methoxyl groups. Thermal analysis by DSC showed the crystalline transition and the crystalline melting point (T-m) at 300 degrees C. This polysaccharide was soluble in water and insoluble in any organic solvents tested; gelation occurred under alkaline conditions in the presence of divalent cations in which copper as CuSO4 gave the best result. Studies on the flocculation property revealed that this polysaccharide was stable at 4-60 degrees C and pH 5-7. The optimal concentrations for the flocculating activity were 2 mg/L polysaccharide and 40 mM CaCl2 which played the synergistic effect on kaolin flocculation. Moreover, this polysaccharide could flocculate the kaolin suspension over a wide range of pH (pH 2-8) and temperature (4-50 degrees C) tested in the presence of CaCl2. (c) 2006 Elsevier Ltd. All rights reserved.

3D culture of bone-derived cells immobilised in alginate following light-triggered gelation

Photoreactive liposomes have been exploited as a means of developing 3D tissue constructs. Liposomes formulated using the photosensitive lipid 1,2-bis(4-(n-butyl)phenylazo-4′-phenylbutyroyl)phosphatidylcholine (Bis Azo PC), which undergoes conformational change on stimulation with long wavelength ultraviolet light, were prepared with entrapped CaCl2 before being incorporated into a 4% alginate solution. It was shown that stimulation of the photosensitive lipid using a light emitting diode (LED) (peak emission at 385 nm, dose equivalent to 9 mJ/cm2) caused the release of liposome-entrapped CaCl2, resulting in cross-linking of the alginate solution and immobilisation of bone-derived cells over a range of seeding densities, approximately 97% of which remained viable for periods of up to 14 days in culture. Entrapment volumes of a variety of liposome types were evaluated and interdigitating fusion vesicles were identified as having the highest payload (24%), however the inclusion of cholesterol as a means of shifting Bis Azo PC sensitivity into the visible light wavelengths resulted in an approximately 10-fold reduction in calcium entrapment. This application of light-sensitised liposomes offers the potential to create complex tissue engineering substrates containing cells immobilised in precise locations, in contrast with substrates onto which cells are seeded post-production. © 2007 Elsevier B.V. All rights reserved.

In situ mineralization by the release of calcium and phosphate ions from nanogels

Biomimetic hydroxyapatite was synthesized by the controlled release of calcium and phosphate ions from poly(N-isopropylacrylamide-co-acrylic acid) (poly(NIPAAm-co-AA)) nanogels. Mixing nanogels containing calcium chloride (CaCl2 ·2H2O) and nanogels containing sodium hydrogen phosphate (Na2HPO4·2H2O) in simulated body fluid (SBF) at physiological conditions of 37 °C and pH 7.4, biomimetic hydroxyapatite was obtained. By studying separately the loading and controlled release of the salts from the nanogels, adequate conditions were chosen to synthesize the hydroxyapatite: Calcium loaded (Ca-loaded) nanogels (1000 mg/ml; 400:3) and inorganic phosphate loaded (Pi-loaded) nanogels (90 mg/ml; 12:1) in a ratio of 2:1 were placed in SBF solution. The obtained powders characterization showed that a low crystalline and substituted hydroxyapatite similar to bone apatite was formed. Such a strategy could be used in medical and dental procedures to induce rapid inorganic mineral formation from a nanogel-containing biomaterial. © 2012 American Scientific Publishers. All rights reserved.

Novos adsorventes para aplicação na remoção de enxofre de combustíveis

Currently the market requires increasingly pure oil derivatives and, with that, comes the need for new methods for obtaining those products that are more efficient and economically viable. Considering the removal of sulfur from diesel, most refineries uses catalytic hydrogenation process, the hydrodesulfurization. These processes needs high energy content and high cost of production and has low efficiency in removing sulfur at low concentrations (below 500 ppm). The adsorption presents itself as an efficient and economically viable alternative in relation to the techniques currently used. With that, the main purpose of this work is to develop and optimize the obtaining of new adsorbents based on diatomite, modified with two non ionic surfactants microemulsions, adding efficiency to the material, to its application on removal of sulfur present in commercial diesel. Analyses were undertaken of scanning electron microscopy (SEM), x-ray diffraction (XRD), x-ray fluorescence (XRF), thermogravimetry (TG) and N2 adsorption (BET) for characterization of new materials obtained. The variables used for diatomite modification were: microemulsion points for each surfactant (RNX 95 and UNTL 90), microemulsion aqueous phase through the use or non-use of salts (CaCl2 and BaCl2), the contact time during the modification and the contact form. The study of adsorption capacity of materials obtained was performed using a statistical modeling to evaluate the influence of salt concentration in the aqueous phase (20 ppm to 1500 ppm), finite bath temperature (25 to 60° C) and the concentration of sulphur in diesel. It was observed that the temperature and the concentration of sulphur (300 to 1100 ppm) were the most significant parameters, in which increasing their values increase the ability of modified clay to adsorb the sulphur in diesel fuel. Adsorption capacity increased from 0.43 to mg/g 1.34 mg/g with microemulsion point optimization and with the addition of salts.

Caracterização físico-química e química do fruto do juazeiro (Ziziphus joazeiro Mart) e avaliação da sua conservação por fermentação láctica

Considering the plant biodiversity in the Brazilian Northeast, whose components can be inserted into sustainable production systems, the jujube (Ziziphus joazeiro Mart.) emerges as to recovery of its fruit. The present study has as objective to characterize the fruit of the jujube under the physical, physicochemical and chemical approach and assess its conservation by spontaneous lactic fermentation under the influence of chloride, sodium, calcium and potassium. According to the legislation, vegetable acidified by fermentation that is subjected to lactic acid fermentation in order to achieve a final product pH less than or equal to 4.5. The results of the physical, chemical and physico-chemistry of ripe fruit jujube showed the potential of this species for agro-processing. The yield of edible portion (91.83%), soluble solids content (18,98º Brix), titratable acidity (0.14% citric acid), pH (5.30) and its composition, divided in moisture (79.01%), protein (2.01%), lipids (0.52%), carbohydrate (17.59%), fiber, ash (0.76%) and its minerals were consistent with the characteristic profile fruits, thus favoring the development of spontaneous lactic fermentation. The minimum pH and titratable acidity observed maximum in the fermentation process under the influence of mixtures of salts (NaCl and KCl NaCl2) values ranged from 3.4 to 3.7 and from 0.54 to 0.95 (% lactic acid), respectively. The profile of the lactic fermentation of fruit of jujube in brine, fermented microbiological quality and the result of analysis of primary sensory prepared preserved, the application of endorsed by the consumer sensory evaluation, more particularly, derived from fermented fruit preserved in the presence of chloride sodium, in accordance with the traditional techniques of lactic fermentation of vegetables. The results of sensory evaluation conducted with 100 consumers (tasters) revealed an acceptance rate equal to 78% of the preserve. Despite restrictions on the sensory acceptability of fermented under the influence of salts (KCl and CaCl2) substitutes sodium chloride, preserved these perspectives presented to balance the optimization of mixtures, health product safety and consumer awareness towards prefer a more healthy product with reduced sodium content.

(Table 1) Determined and theoretical chemical composition of thaumasite of ODP Hole 135-841B

Hole 841B was drilled in the forearc region of the Lau Basin at a water depth of 4810 m. The hole penetrated a roughly 500-m-thick series of Miocene volcanic sediments with a number of basaltic to andesitic units (sills?) varying in thickness between 7 cm and 17 m. The volcanics are slightly to moderately altered and contain analcite, chabazite, natrolite-thompsonite, heulandite (?), prehnite, and quartz as secondary phases. In addition, thaumasite [Ca3Si(OH)6 * 12H2O](SO4)(CO3) was identified in the altered sequence. Sulfur isotope data of two thaumasite separates (+23.5 per mil and +21.1 per mil d34S) indicate a seawater origin of the sulfate sulfur. It is suggested that thaumasite is a product of low-temperature (<60 °C), seawater-derived CaCl2-rich fluids that were almost identical in composition to those presently circulating in the sub-seafloor.

Soil investigations at Casey and Arctowski stations

Soils from the maritime (Arctowski Station, King George Island) and coastal continental (Casey Station, Wilkes Land) Antarctic region are described with respect to pedology, isotopic and microbial environments. They are classified as leptosols, regosols, podzols, and histosols. Only surface layers (1-3 cm) contain sufficient organic material to provide a favourable environment for microbial communities and, further, for accumulations of organic matter. Variability of biological and chemical properties is high on a centimeter scale with depth and in the range of decimeters in horizontal scales.

Évaluation de différents sels et mélanges de sels pour lutter contre"Pseudomonas cichorii" dans la laitue

Ce projet avait pour objectif d’évaluer l’efficacité de certains sels utilisés comme agents de conservation dans l’industrie agroalimentaire et pharmaceutique pour lutter contre la maladie des taches et des nervures noires de la laitue (Lactuca sativa), causée par la bactérie Pseudomonas cichorii. L’étude a permis 1) de déterminer les concentrations minimales inhibitrices (MICs) des sels et de mélanges de ces sels envers des souches virulentes de P. cichorii et 2) d’évaluer l’effet de ces sels et mélanges de sels, appliqués à des concentrations avoisinant les MICs, sur le développement de la maladie. Les résultats obtenus montrent une réduction significative, bien que partielle et variable, de la gravité des symptômes de maladie suite à l’application de NaHCO3 (160 mM), de AlCl3 (4 mM) et des mélanges Na2S2O5 + CaCl2 (12 mM), Na2S2O5 + AlCl3 (4 mM) et Na2S2O5 + NaHCO3 (125 mM). À la lumière des résultats obtenus, il est clair que les sels testés dans le cadre de cette étude ne permettent pas une réduction suffisamment marquée de la maladie pour envisager la commercialisation des plants. On ne peut toutefois exclure la possibilité que ces sels puissent permettre une réduction suffisante de la maladie des taches et des nervures noires lorsqu’utilisés avec des méthodes complémentaires de lutte dans un programme de lutte intégrée.

A petrographic investigation into the durability of common replacement sandstones to the crystallisation of de-icing salts

Scottish sandstone buildings are now suffering the long-term effects of salt-crystallisation damage, owing in part to the repeated deposition of de-icing salts during winter months. The use of de-icing salts is necessary in order to maintain safe road and pavement conditions during cold weather, but their use comes at a price. Sodium chloride (NaCl), which is used as the primary de-icing salt throughout the country, is a salt known to be damaging to sandstone masonry. However, there remains a range of alternative, commercially available de-icing salts. It is unknown however, what effect these salts have on porous building materials, such as sandstone. In order to protect our built heritage against salt-induced decay, it is vital to understand the effects of these different salts on the range of sandstone types that we see within the historic buildings of Scotland. Eleven common types of sandstone were characterised using a suite of methods in order to understand their mineralogy, pore structure and their response to moisture movement, which are vital properties that govern a stone’s response to weathering and decay. Sandstones were then placed through a range of durability tests designed to measure their resistance to various weathering processes. Three salt crystallisation tests were undertaken on the sandstones over a range of 16 to 50 cycles, which tested their durability to NaCl, CaCl2, MgCl2 and a chloride blend salt. Samples were primarily analysed by measuring their dry weight loss after each cycle, visually after each cycle and by other complimentary methods in order to understand their changing response to moisture uptake after salt treatment. Salt crystallisation was identified as the primary mechanism of decay across each salt, with the extent of damage in each sandstone influenced by environmental conditions and pore-grain properties of the stone. Damage recorded in salt crystallisation tests was ultimately caused by the generation of high crystallisation pressures within the confined pore networks of each stone. Stone and test-specific parameters controlled the location and magnitude of damage, with the amount of micro-pores, their spatial distribution, the water absorption coefficient and the drying efficiency of each stone being identified as the most important stone-specific properties influencing salt-induced decay. Strong correlations were found between the dry weight loss of NaCl treated samples and the proportion of pores <1µm in diameter. Crystallisation pressures are known to scale inversely with pore size, while the spatial distribution of these micro-pores is thought to influence the rate, overall extent and type of decay within the stone by concentrating crystallisation pressures in specific regions of the stone. The water absorption determines the total amount of moisture entering into the stone, which represents the total amount of void space for salt crystallisation. The drying parameters on the other hand, ultimately control the distribution of salt crystallisation. Those stones that were characterised by a combination of a high proportion of micro-pores, high water absorption values and slow drying kinetics were shown to be most vulnerable to NaCl-induced decay. CaCl2 and MgCl2 are shown to have similar crystallisation behaviour, forming thin crystalline sheets under low relative humidity and/or high temperature conditions. Distinct differences in their behaviour that are influenced by test specific criteria were identified. The location of MgCl2 crystallisation close to the stone surface, as influenced by prolonged drying under moderate temperature drying conditions, was identified as the main factor that caused substantial dry weight loss in specific stone types. CaCl2 solutions remained unaffected under these conditions and only crystallised under high temperatures. Homogeneous crystallisation of CaCl2 throughout the stone produced greater internal change, with little dry weight loss recorded. NaCl formed distinctive isometric hopper crystals that caused damage through the non-equilibrium growth of salts in trapped regions of the stone. Damage was sustained as granular decay and contour scaling across most stone types. The pore network and hydric properties of the stones continually evolve in response to salt crystallisation, creating a dynamic system whereby the initial, known properties of clean quarried stone will not continually govern the processes of salt crystallisation, nor indeed can they continually predict the behaviour of stone to salt-induced decay.

Double hydrophilic polyphosphoester containing copolymers as efficient templating agents for calcium carbonate microparticles

International audience

Obtenção e caracterização de queratinase de bacillus sp. P45 a partir de coprodutos e aplicação na produção de queijos cremosos enriquecidos com chia e quinoa

As proteases constituem 60-65% do mercado global das enzimas industriais e são utilizadas na indústria de alimentos no processo de amaciamento de carne, na síntese de peptídeos, preparo de fórmulas infantis, panificação, cervejarias, produtos farmacêuticos, diagnósticos médicos, como aditivos na indústria de detergentes e na indústria têxtil no processo de depilação e transformação do couro. Proteases específicas produzidas por micro-organismos queratinolíticos são chamadas de queratinases e distinguem-se de outras proteases pela maior capacidade de degradação de substratos compactos e insolúveis como a queratina. Atualmente, processos que apontem o uso total das matérias-primas e que não resultem em impactos negativos ao meio ambiente tem ganhado destaque. Dentro desta temática, destacam-se a reutilização da farinha de penas residual durante o cultivo do Bacillus sp. P45 para produção de proteases e a biomassa residual de levedura, ambas com elevados teores de proteínas, podendo ser utilizadas no cultivo do Bacillus sp. P45 para obtenção de proteases. O objetivo deste trabalho foi obter a enzima queratinase purificada em grandes quantidades, sua caracterização, bem como a sua aplicação em processos de coagulação enzimática do leite para o desenvolvimento de um queijo cremoso enriquecido com farinha de chia e quinoa. Além disso, aplicar diferentes coprodutos para produção de enzimas proteolíticas e queratinolíticas. A presente tese foi dividida em quatro artigos: no primeiro foi realizado a obtenção da queratinase purificada em maiores quantidades e a determinação dos parâmetros de estabilidade térmica e a influência de componentes químicos na atividade enzimática. A obtenção da enzima em maiores quantidades alcançou fatores de purificação de 2,6, 6,7 e 4,0 vezes, paras 1º SAB, 2º SAB e diafiltração, respectivamente. A recuperação enzimática alcançou valores de 75,3% para o 1º SAB, 75,1% no 2º sistema e 84,3% na diafiltração. A temperatura de 55ºC e o pH 7,5 foram determinados como ótimos para atividade da enzima queratinase. O valor da energia de desativação (Ed) médio foi de 118,0 kJ/mol e os valores de z e D variaram de 13,6 a 18,8ºC, e 6,9 a 237,3 min, respectivamente. Além disso a adição de sais (CaCl2, CaO, C8H5KO4 e MgSO4) elevou a atividade da enzima na presença destes compostos. O segundo artigo apresenta a aplicação da queratinase como coagulante de leite bovino e sua aplicação na obtenção de queijo cremoso enriquecido com chia e quinoa. A enzima mostrou atividade de coagulação semelhante ao coagulante comercial, na concentração de 30mg/mL. A enzima purificada foi empregada de forma eficiente na fabricação do queijo cremoso, que apresentou valores de pH de 5,3 e acidez de 0,06 a 0,1 mol/L, com elevação durante os 25 dias de armazenamento. O terceiro artigo apresenta o perfil do queijo cremoso enriquecido com farinha de chia e quinoa, o qual apresentou alto índice de retenção de água (>99,0%) e baixos valores de sinérese (<0,72%). Elevados teores de fibras foi verificado (3,0 a 5,0%), sugerindo seu consumo como fonte de fibras. As análises microbiológicas foram de acordo com a legislação vigente. Na análise sensorial foi verificado altos valores de suavidade ao paladar e verificado maiores valores de consistência e untabilidade nas amostras com maiores concentrações de nata e quinoa. O quarto artigo traz a extração de β-galactosidase por ultrassom e o uso da biomassa residual da levedura, bem como o uso de farinha de penas residuais como substrato para obtenção de proteases. O ultrassom foi eficiente para ruptura celular e extração de β-galactosidase, apresentando alta atividade (35,0 U/mL) e rendimento (876,0 U/g de biomassa). A maior atividade proteolítica (1300 U/mL em 32 h) e queratinolítica (89,2 U/mL) verificadas ocorreram utilizando-se a biomassa e a farinha de penas residuais, respectivamente. Maior produtividade proteolítica (40,8 U/mL/h) foi verificado no meio utilizando biomassa residual como substrato. Já a maior produtividade queratinolítica (2,8 U/mL/h) foi alcançada utilizando farinha de penas reutilizada.

The whole-cell immobilization of D-hydantoinase-engineered Escherichia coli for D-CpHPG biosynthesis

Background: D-Hydroxyphenylglycine is considered to be an important chiral molecular building-block of antibiotic reagents such as pesticides, and β-lactam antibiotics. The process of its production is catalyzed by D-hydantoinase and D-carbamoylase in a two-step enzyme reaction. How to enhance the catalytic potential of the two enzymes is valuable for industrial application. In this investigation, an Escherichia coli strain genetically engineered with D-hydantoinase was immobilized by calcium alginate with certain adjuncts to evaluate the optimal condition for the biosynthesis of D-carbamoyl-p-hydroxyphenylglycine (D-CpHPG), the compound further be converted to D-hydroxyphenylglycine (D-HPG) by carbamoylase. Result: The optimal medium to produce D-CpHPG by whole-cell immobilization was a modified Luria-Bertani (LB) added with 3.0% (W/V) alginate, 1.5% (W/V) diatomite, 0.05% (W/V) CaCl2 and 1.00 mM MnCl2. The optimized diameter of immobilized beads for the whole-cell biosynthesis here was 2.60 mm. The maximized production rates of D-CpHPG were up to 76%, and the immobilized beads could be reused for 12 batches. Conclusions: This investigation not only provides an effective procedure for biological production of D-CpHPG, but gives an insight into the whole-cell immobilization technology. © 2016 Pontificia Universidad Católica de Valparaíso. Production and hosting by Elsevier B.V. All rights reserved.

Understanding the cation specific effects on the aqueous solubility of amino acids: from mono to polyvalent cations

The interactions established by mono and polyvalent cations in natural media have important implications on the structure formation, function and physico-chemical behavior of biomolecules, playing therefore a critical role in biochemical processes. In order to further elucidate the molecular phenomena behind the cation specific effects in biological environments, and clarify the influence of the charge of the ions, solubility measurements and molecular dynamics simulations were performed for aqueous solutions of three amino acids (alanine, valine and isoleucine), in the presence of a series of inorganic salts comprising mono-, di- and trivalent cations (LiCl, Li2SO4, K2SO4, CaCl2, AlCl3 and Al-2(SO4)(3)). The evidence gathered indicates that the mechanism by which (salting-in inducing) polyvalent cations affect the solubility of amino acids in aqueous solutions is different from that of monovalent cations. A consistent and refined molecular description of the effect of the cation on the solubility of amino acids based on specific interactions of the cations with the negatively charged moieties of the biomolecules is here proposed.

Utilização de nanosílica como aditivo estendedor para pastas cimentantes de baixa densidade destinadas à cimentação de poços petrolíferos

Cementing operations are conducted at different times of the well s life and they have high importance, because the functions are fundamental to keep good properties during a long life of the well, such as, maintain the mechanical stability of the well, to promote the isolation hydraulic and support the tubing. In some situations, the rocky zones have low fractures pressures and require the use of lightweight slurries to prevent the hydrostatic pressure in the formation is greater than the pressure of fracture. There are three ways to reduce the density of cement slurries: exterders water additives, microspheres and foamed slurries. The most used extender water additive is sodium bentonite, which is a clay with a good capacity of water absorption and expansion of its volume, the main disadvantage of this additive is the reduction of the strength. Currently, the use of nanoscale particles has received special attention, mainly because they get new functionalities. Following this trend, this paper aims to use a colloidal solution of nano-silica as an exterders water additives for use in oil wells. Slurries were designed with fixed 13lb/gal density and concentration of nano silica 0.1 gpc; 0.4 gpc; 0.7 and 1gpc, the influence of nano-silica was studied at these levels in isolation and combined varying concentrations of CaCl2,. Tests including rheology, stability, strength, thickening time, porosity and permeability. Besides the API tests, microstructural characterizations were performed after 28 days of the slurries, X-ray diffraction (XRD) and scanning electron microscopy (SEM)