Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Utilização de uma coluna de flotação para remoção de compostos orgânicos da água de produção

Innovative technologies using surfactant materials have applicability in several industrial fields, including petroleum and gas areas. This study seeks to investigate the use of a surfactant derived from coconut oil (SCO saponified coconut oil) in the recovery process of organic compounds that are present in oily effluents from petroleum industry. For this end, experiments were accomplished in a column of small dimension objectifying to verify the influence of the surfactant SCO in the efficiency of oil removal. This way, they were prepared emulsions with amount it fastens of oil (50, 100, 200 and 400 ppm), being determined the great concentrations of surfactant for each one of them. Some rehearsals were still accomplished with produced water of the industry of the petroleum to compare the result with the one of the emulsions. According to the experiments, it was verified that an increase of the surfactant concentration does not implicate in a greater oil removal. The separation process use gaseous bubbles formed when a gas stream pass a liquid column, when low surfactant concentrations are used, it occurs the coalescence of the dispersed oil droplets and their transport to the top of the column, forming a new continuous phase. Such surfactants lead to a gas-liquid interface saturation, depending on the used surfactant concentration, affecting the flotation process and influencing in the removal capacity of the oily dispersed phase. A porous plate filter, with pore size varying from 40 to 250 mm, was placed at the base of the column to allow a hydrodynamic stable operation. During the experimental procedures, the operating volume of phase liquid was held constant and the rate of air flow varied in each experiment. The resulting experimental of the study hydrodynamic demonstrated what the capturing of the oil was influenced by diameter of the bubbles and air flow. With the increase flow of 300 about to 900 cm3.min-1, occurred an increase in the removal of oil phase of 44% about to 66% and the removal kinetic of oil was defined as a reaction of 1° order.

Eficiência de extração de cobre e níquel utilizando sistemas microemulsionados bifásicos e trifásicos

The environmental impact due to the improper disposal of metal-bearing industrial effluents imposes the need of wastewater treatment, since heavy metals are nonbiodegradable and hazardous substances that may cause undesirable effects to humans and the environment. The use of microemulsion systems for the extraction of metal ions from wastewaters is effective when it occurs in a Winsor II (WII) domain, where a microemulsion phase is in equilibrium with an aqueous phase in excess. However, the microemulsion phase formed in this system has a higher amount of active matter when compared to a WIII system (microemulsion in equilibrium with aqueous and oil phases both in excess). This was the reason to develop a comparative study to evaluate the efficiency of two-phases and three-phases microemulsion systems (WII and WIII) in the extraction of Cu+2 and Ni+2 from aqueous solutions. The systems were composed by: saponified coconut oil (SCO) as surfactant, n-Butanol as cosurfactant, kerosene as oil phase, and synthetic solutions of CuSO4.5H2O and NiSO4.6H2O, with 2 wt.% NaCl, as aqueous phase. Pseudoternary phase diagrams were obtained and the systems were characterized by using surface tension measurements, particle size determination and scanning electron microscopy (SEM). The concentrations of metal ions before and after extraction were determined by atomic absorption spectrometry. The extraction study of Cu+2 and Ni+2 in the WIII domain contributed to a better understanding of microemulsion extraction, elucidating the various behaviors presented in the literature for these systems. Furthermore, since WIII systems presented high extraction efficiencies, similar to the ones presented by Winsor II systems, they represented an economic and technological advantage in heavy metal extraction due to a small amount of surfactant and cosurfactant used in the process and also due to the formation of a reduced volume of aqueous phase, with high concentration of metal. Considering the reextraction process, it was observed that WIII system is more effective because it is performed in the oil phase, unlike reextraction in WII, which is performed in the aqueous phase. The presence of the metalsurfactant complex in the oil phase makes possible to regenerate only the surfactant present in the organic phase, and not all the surfactant in the process, as in WII system. This fact allows the reuse of the microemulsion phase in a new extraction process, reducing the costs with surfactant regeneration

Estudo do comportamento mecânico de estruturas de solo-cimento reforçado com fibras de coco e hastes de bambu

In this work the use of coconut fiber (coir) and bamboo shafts as reinforcement of soil-cement was studied, in order to obtain an alternative material to make stakes for fences in rural properties. The main objective was to study the effect of the addition of reinforcement to the soil-cement matrix. The effect of humidity on the mechanical properties was also analyzed. The soil-cement mortar was composed by a mixture, in equal parts, of soil and river sand, 14% in weight of cement and 10 % in weight of water. As reinforcement, different combinations of (a) coconut fiber with 15 mm mean length (0,3 %, 0,6 % and 1,2 % in weight) and (b) bamboo shafts, also in crescent quantities (2, 4 and 8 shafts per specimen) were used. For each combination 6 specimens were made and these were submitted to three point flexural test after 28 days of cure. In order to evaluate the effect of humidity, 1 specimen from each of the coconut fiber reinforced combination was immersed in water 24 hours prior to flexural test. The results of the tests carried out indicated that the addition of the reinforcement affected negatively the mechanical resistance and, on the other hand, increased the tenacity and the ductility of the material.

Evaluation of fertilizing potential of frozen-thawed dog spermatozoa diluted in ACP-106 (R) using an in vitro sperm-oocyte interaction assay

The aim of present study was to evaluate frozen canine semen with ACP-106 (R) (Powder Coconut Water) using an in vitro sperm-oocyte interaction assay (SOIA). Ten ejaculates from five stud dogs were diluted in ACP-106 (R) containing 20% egg yolk, submitted to cooling in a thermal box for 40 min and in a refrigerator for 30 min. After this period, a second dilution was performed using ACP-106 (R) containing 20% egg yolk and 12% glycerol. Samples were thawed at 38 degrees C for 1 min. Post-thaw motility was evaluated by light microscopy and by using a computer aided semen analysis (CASA). Plasma membrane integrity and sperm morphology/acrosomal status were evaluated by fluorescent probes (C-FDA/PI) and Bengal Rose respectively. Moreover, frozen-thawed semen was analysed by a SOIA. Subjective post-thaw motility was 52.0 +/- 14.8% and it was significant higher than the total motility estimated by CASA (23.0 +/- 14.8%) because this system considered the egg yolk debris as immotile spermatozoa. Although normal sperm rate and acrosomal integrity evaluated by Bengal Rose stain was 89.6 +/- 3.1 % and 94.3 +/- 3.1 %, respectively, post-thaw percentage of intact plasma membrane was only 35.1 +/- 14.3%. Regarding SOIA, the percentage of interacted oocytes (bound, penetrated and bound and/or penetrated) was 75.3%. Using regression analysis, it was found significant relations between some CASA patterns and data for SOIA. In conclusion, the freezing-thawing procedure using ACP-106 (R) was efficient for maintain the in vitro fertility potential of dog spermatozoa.

Color stability of chemically activated reline resin after microwave disinfection: A 1-year clinical trial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Color stability of relined dentures after chemical disinfection. A randomised clinical trial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos de reguladores vegetais no enraizamento de estacas caulinares de Poncirus trifoliata var. monstrosa (T. Ito)

O trabalho objetivou estudar os efeitos de reguladores vegetais no enraizamento de estacas caulinares de Flying Dragon [Poncirus trifoliata var. monstrosa (T. Ito)]. Na metade de cada estação do ano, ramos de citros foram coletados (4 experimentos), a partir dos quais foram retiradas estacas com 10 cm de comprimento com uma folha cortada ao meio. As bases das estacas foram tratadas com os seguintes reguladores vegetais na forma de talco: Testemunha (H2O); IBA 0,5%; NAA a 0,5%; IBA + ácido caféico a 0,5%, e NAA + ácido caféico 0,5%. As estacas foram plantadas em bandejas de isopor contendo fibra de coco e mantidas por três meses em câmara de nebulização. Os resultados mostraram que para a propagação desta espécie por estaquia, a coleta dos ramos deve ser no outono e que as mesmas sejam tratadas com a mistura de NAA + ácido caféico, ambos a 0,5%.

Seed with and without Partial Tegument Removal and Substrate Affect Germination of Castanea sativa

Portuguese chestnut (Castanea sativa) is used for forest products, raw nuts and processed flour, paste, and candy. We studied the influence on germination efficiency of seed with and without partial tegument removal combined with different substrate composition (coconut fiber, pine compost and vermiculite) at São Paulo State University, Campus of Botucatu, São Paulo, Brazil. Randomized blocks were used in a factorial scheme 3x2 (three substrates x two seed types) consisting of six treatments with five replications (twelve seeds). Seeds were sowed in expanded polystyrene trays, with 72 cells, and maintained at 25 C under controlled environment. Rate, time elapsed and speed of seed germination was submitted to ANOVA and the average compared using Tukey's 5% test of probability and curves adjusted based on Gompertz regression. Coconut fiber or vermiculite associated with seed without partial tegument removal showed the highest germination rate, and coconut fiber with or without partial tegument removal displayed the fastest speed of seed germination.

Ação do BAP na regeneração in vitro de Blc Owen Holmes Ponkan x Brassavola digbiana nº 2

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incidence of tarsonemid mites on Cocos nucifera L. (Arecaceae) from Oman with description of a new species of Nasutitarsonemus Beer and Nucifora (Acari: Tarsonemidae)

Coconut is an important crop grown in the coastal plain of the Dhofar region, south-eastern Oman, on the edge of the Arabian Peninsula desert. It holds a particular place in the landscaping of the region and is also of great interest for the production of coconut drinking water. One of the main pests of coconut in this region is the coconut mite (Aceria guerreronis Keifer). In surveys conducted to understand the dynamics of that mite and its association with other arthropods, the incidence of tarsonemid mites was determined. Steneotarsonemus furcatus de Leon was the most commonly found tarsonemid on fruits as well as on growing tips of coconut seedlings, always at low levels. A few representatives of an undescribed tarsonemid species were also found. That new species is here described as Nasutitarsonemus omani Lofego and Moraes, sp. nov. A key to the species of this little-known genus is provided.

Influência de plantas invasoras na abundância de himenópteros parasitoides (Insecta, Hymenoptera) coletados em cultura de coqueiro anão verde, em Linhares, ES, Brasil

O objetivo deste estudo foi analisar a influência de plantas invasoras na abundância de himenópteros parasitoides associados a uma cultura de coqueiro anão verde, no Município de Linhares, ES. Para a captura dos insetos foram utilizadas armadilhas tipo Möericke, de cor amarela, em duas áreas, uma mantida roçada e outra com a presença de plantas invasoras. em cada área foram instaladas seis armadilhas ao nível do solo, distanciadas entre si por 22,5 m. As amostragens, semanais, foram realizadas entre março de 2008 e fevereiro de 2009. Foram coletados 19.861 himenópteros parasitoides dos quais 70,8% ocorreram na área com plantas invasoras e 29,2% na roçada. As famílias mais frequentemente coletadas foram Diapriidae, Scelionidae, Ceraphronidae, Eulophidae, Mymaridae, Encyrtidae e Ichneumonidae; as demais famílias apresentaram frequencias relativas inferiores a 3%. As plantas invasoras presentes na área foram Ageratum conyzoides L., Bidens pilosa L., Emilia sanchifolia (L.) DC., Sonchus oleraceus L. (Asteraceae), Alternanthera tenella Colla (Amaranthaceae), Commelina benghalensis L. (Commelinaceae), Ipomoea sp. (Convolvulaceae), Euphorbia hirta L. (Euphorbiaceae), Cassia hirsuta L., Desmodium barbatum (L.), Indigofera hirsuta L. (Fabaceae), Sida sp. (Malvaceae), Borreria verticillata (L.) (Rubiaceae), Lantana camara L. e Stachytarphetta cayenensis (Rich.) M. Vahl (Verbenaceae); para algumas delas há relatos na literatura como fornecedoras de recursos alimentares e suplementares para a sobrevivência de himenópteros parasitoides.

Adubação com NPK em coqueiro-anão-verde (Cocos nucifera L.) rendimento e qualidade de frutos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características químicas de substratos utilizados na produção de mudas de cacaueiros

O objetivo deste trabalho foi realizar monitoramento químico de seis substratos utilizados na produção de mudas de cacaueiros. Os substratos receberam 10 volumes (100mL, cada) de água destilada, e no lixiviado coletado foram determinados o pH, a condutividade elétrica (CE) e os teores de sódio (Na) e potássio (K) em solução. Os valores de pH variaram de 5,0 a 8,0 em Plantmax® e composto do tegumento da amêndoa do cacau (CTAC), respectivamente. Verificou-se que, a partir do primeiro volume lixiviado, a CE de todos os substratos foi reduzida. Foram encontradas correlações positivas para a CE em relação ao K e Na da fibra de coco (FC) (r=0,83 e 0,72 P<0,05) e CTAC (r=0,98 e 0,99 P<0,05). Os resultados indicam que a FC e o CTAC deveriam ser usados após pré-lavagens. Verificou-se que, embora a FC apresente na primeira lixiviação valor de CE superior aos demais substratos, o valor ideal da 2,0 dSm-1 é alcançado na segunda lixiviação. Os teores de K e Na são um indicativo do valor da CE em FC e CTAC.

Recomendação de adubação e calagem para coqueiro (Cocos nucifera L.) no Estado de São Paulo - 1ª. aproximação

O objetivo deste trabalho foi apresentar a 1ª. aproximação da recomendação de adubação e calagem para coqueiro no Estado de São Paulo, visando à produção de água. O cultivo de coqueiro nesta região é recente, carecendo de recomendações técnicas. Esta recomendação foi elaborada a partir de resultados experimentais obtidos em campo e de informações disponíveis na literatura. A recomendação de adubação segue os padrões do Boletim Técnico 100 do Instituto Agronômico (SP). Nas tabelas apresentadas, as doses de fertilizantes são obtidas com base nos teores de P e K disponíveis no solo, na idade das plantas durante a formação do coqueiral (até 5 anos) e, posteriormente (fase de produção), na produtividade esperada.