Electrochemical and quantum chemical investigations of the insecticide fipronil.

This work describes an electrochemical and quantum chemical investigation of the fipronil insecticide. Cyclic voltammetry (CV) and square wave voltammetry (SWV) experiments were performed over a graphite-polyurethane (GPU) composite electrode. The fipronil molecule presents an one?electron irreversible oxidation reaction. Profiting the SWV signal a square wave stripping voltammetry (SWSV) procedure to determine the fipronil molecule in a 0.10 mol L-1 Britton-Robinson buffer solution, pH 8.0 was developed with accumulation potential and time of 0.50 V and 120 s, respectively. The limits of detection and quantification were 0.80 and 2.67 ?g L-1, respectively. Recovery tests were performed in three natural waters samples with values ranging from 99.67 to 101.37%. Quantum chemical studies showed that the nitrogen atom of the pyrazole group is the most probable oxidation site of the fipronil molecule.

Chemical composition, toxicity and larvicidal and antifungal activities of Persea americana (avocado) seed extracts

The present study had the aim of testing the hexane and methanol extracts of avocado seeds, in order to determine their toxicity towards Artemia salina, evaluate their larvicidal activity towards Aedes aegypti and investigate their in vitro antifungal potential against strains of Candida spp, Cryptococcus neoformans and Malassezia pachydermatis through the microdilution technique. In toxicity tests on Artemia salina, the hexane and methanol extracts from avocado seeds showed LC50 values of 2.37 and 24.13mg mL-1 respectively. Against Aedes aegypti larvae, the LC50 results obtained were 16.7mg mL-1 for hexane extract and 8.87mg mL-1 for methanol extract from avocado seeds. The extracts tested were also active against all the yeast strains tested in vitro, with differing results such that the minimum inhibitory concentration of the hexane extract ranged from 0.625 to 1.25mg L-¹, from 0.312 to 0.625mg mL-1 and from 0.031 to 0.625mg mL-1, for the strains of Candida spp, Cryptococcus neoformans and Malassezia pachydermatis, respectively. The minimal inhibitory concentration for the methanol extract ranged from 0.125 to 0.625mg mL-1, from 0.08 to 0.156mg mL-1 and from 0.312 to 0.625mg mL-1, for the strains of Candida spp., Cryptococcus neoformans and Malassezia pachydermatis, respectively.

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Potential for entomopathogenic fungi to control Triatoma dimidiata (Hemiptera: Reduviidae), a vector of Chagas disease in Mexico

Introduction The use of entomopathogenic fungi to control disease vectors has become relevant because traditional chemical control methods have caused damage to the environment and led to the development of resistance among vectors. Thus, this study assessed the pathogenicity of entomopathogenic fungi in Triatoma dimidiata. Methods Preparations of 108 conidia/ml of Gliocladium virens, Talaromyces flavus, Beauveria bassiana and Metarhizium anisopliae were applied topically on T. dimidiata nymphs and adults. Controls were treated with the 0.0001% Tween-80 vehicle. Mortality was evaluated and recorded daily for 30 days. The concentration required to kill 50% of T. dimidiata (LC50) was then calculated for the most pathogenic isolate. Results Pathogenicity in adults was similar among B. bassiana, G. virens and T. flavus (p>0.05) and differed from that in triatomine nymphs (p=0.009). The most entomopathogenic strains in adult triatomines were B. bassiana and G. virens, which both caused 100% mortality. In nymphs, the most entomopathogenic strain was B. bassiana, followed by G. virens. The native strain with the highest pathogenicity was G. virens, for which the LC50 for T. dimidiata nymphs was 1.98 x108 conidia/ml at 13 days after inoculation. Conclusions Beauveria bassiana and G. virens showed entomopathogenic potential in T. dimidiata nymphs and adults. However, the native G. virens strain presents a higher probability of success in the field, and G. virens should thus be considered a potential candidate for the biological control of triatomine Chagas disease vectors.

Chemical composition and antifungal activity of essential oil from Eucalyptus smithii against dermatophytes

ABSTRACT INTRODUCTION: In this study, we evaluated the chemical composition of a commercial sample of essential oil from Eucalyptus smithii R.T. Baker and its antifungal activity against Microsporum canis ATCC 32903, Microsporum gypseum ATCC 14683, Trichophyton mentagrophytes ATCC 9533, T. mentagrophytes ATCC 11480, T. mentagrophytes ATCC 11481, and Trichophyton rubrum CCT 5507. METHODS: Morphological changes in these fungi after treatment with the oil were determined by scanning electron microscopy (SEM). The antifungal activity of the oil was determined on the basis of minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values. RESULTS: The compound 1,8-cineole was found to be the predominant component (72.2%) of the essential oil. The MIC values of the oil ranged from 62.5μg·mL−1 to >1,000μg·mL−1, and the MFC values of the oil ranged from 125μg·mL−1 to >1,000μg·mL−1. SEM analysis showed physical damage and morphological alterations in the fungi exposed to this oil. CONCLUSIONS: We demonstrated the potential of Eucalyptus smithii essential oil as a natural therapeutic agent for the treatment of dermatophytosis.

Characterization of physical, mechanical and chemical properties of quiscal fibres : the influence of atmospheric DBD plasma treatment

This paper reports the first attempt of characterizing various physical, mechanical and chemical properties of Quiscal fibres, used by the native communities in Chile and investigating the influence of atmospheric dielectric barrier discharge plasma treatment on various properties such as diameter and linear density, fat, wax and impurity%, moisture regain, chemical elements and groups, thermal degradation, surface morphology, etc. According to the experimental observations, Quiscal fibre has lower tenacity than most of the technical grade natural fibres such as sisal, hemp, flax, etc., and plasma treatment at optimum dose improved its tenacity to the level of sisal fibres. Plasma treatment also reduced the amount of fat, wax and other foreign impurities present in Quiscal fibres as well as removed lignin and hemicellulose partially from the fibre structure. Plasma treatment led to functionalization of Quiscal fibre surface with chemical groups, as revealed from attenuated total reflection spectroscopy and also confirmed from the elemental analysis using energy dispersive Xray technique and pH and conductivity measurements of fibre aqueous extract. The wetting behavior of Quiscal fibre also improved considerably through plasma treatment. However, untreated and plasma treated Quiscal fibres showed similar thermal degradation behavior, except the final degradation stage, in which plasma treated fibres showed higher stability and incomplete degradation unlike the untreated fibres. The experimental results suggested that the plasma treated Quiscal fibres, like other technical grade natural fibres, can find potential application as reinforcement of composite materials for various industrial applications.

Copper toxicity for Scinax ruber and Rhinella granulosa (Amphibia: Anura) of the Amazon: Potential of Biotic Ligand Model to predict toxicity in urban streams

In the last years many populations of anurans have declined and extinctions have been recorded. They were related to environmental pollution, changes of land use and emerging diseases. The main objective of this study was to determine copper sensitivity of the anuran of the Amazon Rhinella granulosa and Scinax ruber tadpoles at stage 25 and Scinax ruber eggs exposed for 96 h to copper concentrations ranging from 15 µg Cu L-1 to 94 µg Cu L-1. LC50 at 96 h of Rhinella granulosa Gosner 25, Scinax ruber Gosner 25 and Scinax ruber eggs in black water of the Amazon were 23.48, 36.37 and 50.02 µg Cu L-1, respectively. The Biotic Ligand Model was used to predict the LC50 values for these species and it can be considered a promising tool for these tropical species and water conditions. Copper toxicity depends on water physical-chemical composition and on the larval stage of the tadpoles. The Gosner stage 19-21 (related to the appearance of external gills) is the most vulnerable and the egg stage is the most resistant. In case of contamination by copper, the natural streams must have special attention, since copper is more bioavailable.

Seasonal effects and antifungal activity from bark chemical constituents of Sterculia apetala (Malvaceae) at Pantanal of Miranda, Mato Grosso do Sul, Brazil

In the Southern Pantanal, the hyacinth macaw (Anodorhynchus hyacinthinus), an endangered species, often chooses the manduvi tree (Sterculia apetala) as a nesting site, because of its physical properties. In addition, the chemical composition of the wood may also contribute to a nesting selection by the hyacinth macaws. The objective of this study was to determine the main chemical components of S. apetala bark for two seasons, and evaluate its fungicidal potential. Bark samples from S. apetala trees with and without nests of A. hyacinthinus were collected in January (wet season) and August (dry season) of 2012. The inhibition of mycelium growth (MGI) from tree samples with and without nests were assessed using a phytochemical analysis to evaluate their antifungal activity against Trichoderma sp. Phytochemical analysis confirmed the presence of phenolic compounds and flavonoids. In both seasons, samples obtained from nested trees had higher content of total phenols than those collected from non-nested trees. The average content of total flavonoids was higher in January for samples with nest and in August for samples without nest. All selected samples showed antifungal activity, and those with nest collected in August (peak of hyacinth macaw breeding) resulted in an MGI of 51.3%. Therefore, this percentage, related to the content of flavonoids and the presence of coumarins, may influence the reproductive success of hyacinth macaws and other species of birds, in this region. This is the first chemical study report with the stem bark of S. apetala.

Chemical characterization and bioactive properties of Prunus avium L.: The widely studied fruits and the unexplored stems

The aim of this study was to characterize sweet cherry regarding nutritional composition of the fruits, and individual phytochemicals and bioactive properties of fruits and stems. The chromatographic profiles in sugars, organic acids, fatty acids, tocopherols and phenolic compounds were established. All the preparations (extracts, infusions and decoctions) obtained using stems revealed higher antioxidant potential than the fruits extract, which is certainly related with its higher phenolic compounds (phenolic acids and flavonoids) concentration. The fruits extract was the only one showing antitumor potential, revealing selectivity against HCT-15 (colon carcinoma) (GI50~74 μg/mL). This could be related with anthocyanins that were only found in fruits and not in stems. None of the preparations have shown hepatotoxicity against normal primary cells. Overall, this study reports innovative results regarding chemical and bioactive properties of sweet cherry stems, and confirmed the nutritional and antioxidant characteristics of their fruits.

Development of hybrid composite plate (HCP) for strengthening and repair of RC structures

Tese de Doutoramento em Engenharia Civil

Investigation into the potential for establishing a self-sustainable wetland ecosystem over pyritic mine tailings

Research was conducted to investigate the potential for ecologically engineering a sustainable wetland ecosystem over pyritic mine tailings to prevent the generation of acid mine drainage. Ecological engineering is technology with the primary goal being the creation of self-sustainable ecological systems. Work involved the design and construction of a pilot-scale wetland system comprising three wetland cells, each covering 100 m2. Approximately forty tonnes of pyritic mine tailings were deposited on the base of the first cell above a synthetic liner, covered with peat, flooded and planted with emergent wetland macrophytes Typha latifolia, Phragmites australis, and Juncus effusus. The second cell was constructed as a conventional free water surface wetland, planted identically, and used as a reference wetland/experimental control. Wetland monitoring to determine long-term sustainability focused on indicators of ecosystem health including ecological, hydrological, physico-chemical, geochemical, and biotic metrics. An integrated assessment was conducted that involved field ecology in addition to ecological risk assessment. The objective of the field ecology study was to use vegetative parameters as ecological indicators for documenting wetlands success or degradation. The goal of the risk assessment was to determine if heavy-metal contamination of the wetland sediments occurred through metal mobilisation from the underlying tailings, and to evaluate if subsequent water column chemistry and biotic metal concentrations were significantly correlated with adverse wetland ecosystem impacts. Data were used to assess heavy metal bioavailability within the system as a function of metal speciation in the wetland sediments. Results indicate hydrology is the most important variable in the design and establishment of the tailings wetland and suggest a wetland cover is an ecologically viable alternative for pyritic tailings which are feasible to flood. Ecological data indicate that in terms of species richness and diversity, the tailings-wetland was exhibiting the ecological characteristics of natural wetlands within two years. Ata indicate that pH and conductivity in the tailings-wetland were not adversely impacted by the acid-generating potential or sulphate concentration of the tailings substrate and its porewater. Similarly, no enhanced seasonal impacts from sulphate or metals in the water column, nor adverse impacts on the final water quality of the outflows, were detected. Mean total metal concentrations in the sediments of the tailings-wetland indicate no significant adverse mobilisation of metals into the peat substrate from the tailings. Correlation analyses indicate a general increase in sediment metal concentration in this wetland with increasing water depth and pH, and a corresponding decrease in the metal concentrations of the water column. Sediment extractions also showed enrichment of Cd, Fe, Pb and Zn in the oxidisable fraction (including sulphides and organic matter) of the tailings-wetland sediments. These data suggest that adsorption and coprecipitation of metals is occurring from the water column of the tailings wetland with organic material at increasing depths under reducing conditions. The long-term control of metal bioavailability in the tailings wetland will likely be related to the presence and continual build-up of organic carbon binding sites in the developing wetland above the tailings. Metal speciation including free-metal ion concentration and the impact of physico-chemical parameters particularly pH and organic matter, were investigated to assess ecotoxicological risk. Results indicate that potentially bioavailable metals (the sum of the exchangeable and reducible fractions) within the tailings wetland are similar to values cited for natural wetlands. Estimated free-metal ion concentrations calculated from geochemical regression models indicate lower free-metal ion concentrations of Cd in the tailings wetland than natural wetlands and slightly higher free-metal ion concentrations of Pb and Zn. Increased concentrations of metals in roots, rhizomes and stems of emergent macrophytes did not occur in the tailings wetland. Even though a substantial number of Typha latifolia plants were found rooting directly into tailings, elevated metals were not found in these plant tissues. Phragmites also did not exhibit elevated metal concentrations in any plant tissues. Typha and Phragmites populations appear to be exhibiting metal-tolerant behaviour. The chemistry of the water column and sediments in Silvermines wetland were also investigated and were much more indicative of a wetland system impacted by heavy metal contamination than the tailings-wetland. Mean Dc, Fe, Mn, Pb and Zn concentrations in the water column and sediments of Silvermines wetlands were substantially higher than in the pilot wetlands and closely approximate concentrations in these matrices contaminated with metals from mining. In addition, mean sulphate concentration in Silvermines wetland was substantially higher and is closer to sulphate concentrations in waters associated with mining. Potentially bioavailable metals were substantially elevated in Silvermines wetland in comparison to the pilot wetlands and higher than those calculated for natural rive sediments. However, Fe oxy-hydroxide concentrations in Silvermines sediments are also much higher than in the pilot wetlands and this significantly impacts the concentration of free-metal ions in the sediment porewater. The free-metal ion concentrations for Pb and Zn indicate that Silvermines wetland is retaining metals and acting as a treatment wetland for drainage emanating from Silvermines tailings dam.

Untersuchung zur Anwendung des Modells "Chemical Leasing" im Vertrieb von Kunststoffgranulat

Der Themenschwerpunkt dieser Arbeit ist das Chemical Leasing. Es wird untersucht, ob dieses Geschäftsmodell auch für den Vertrieb von Kunststoffgranulat genutzt werden kann. Der Fokus liegt auf dem Kunststoff Polypropylen (PP). Der Einsatz des Geschäftsmodell Chemical Leasing wird anhand der Kriterien: Potential des Materials, Wichtigkeit des Prozessschritts, Grad der Spezialisierung und der Verfügbarkeit von geeigneten Partnern vollzogen. Dabeiwird insbesondere aus der Sicht des Rohstoffherstellers berichtet. In dem Verarbeitungsschritt „Compoundieren“ werden bei dem Rohstoffhersteller modifizierte Polypropylene hergestellt. Ist es durch die Compoundveredelung möglich das Potential des Polypropylen zu ändern? Da in dieser Untersuchung der Automobilbau und seine Zulieferstruktur betrachtet werden, wird an den beteiligten Unternehmen dieser Lieferkette geprüft,wo der Grad der Spezialisierung und die Wichtigkeit des Prozessschritts für die jeweiligen Unternehmen liegen. Die gesamte Betrachtung bezieht sich dabei auf den Verarbeitungsschritt Spritzgießen. Die Arbeit zeigt an zwei Praxisbeispielen wie der Grundgedankedes Chemical Leasing (je weniger desto besser)mit den passenden Kunststoffprodukten positiv umgesetzt werden kann. Durch die Analyse der einzelnen Zulieferbetriebe kann schlussendlich festgelegt werden, bei welchen Kunden die Umstellung auf das Chemical Leasing erfolgreich sein wird.Der Vertriebsablauf wird sich durch den Einsatz von Chemical Leasing ändern, es wird aufgezeig twelche Maßnahmen ergriffen werden müssen,um diesem Wandel gewappnet zu sein.Die Arbeit zeigt, dass der Vertrieb von Kunststoffgranulat mit Chemical Leasing möglich ist.

Oxidative potential for fine/ultrafine particles in occupational situations

Introduction : The redox properties of fine/ultrafine particles as well as nanoparticles (NP) are suggested to be important to explain their biological activity and could constitute a novel and promising metric for hazard evaluation. The acellular in vitro dithiothreitol (DTT) assay allows measuring this property. Objectives : (1) to evaluate sampling requirements for fine/ultrafine particle allowing measurement of their oxidative potential (2) to apply the methodology to occupational situations where particle from combustion sources are generated. Material and method : Sampling parameters (type of filters and loaded amount) and storage duration affecting the DTT measurements were evaluated. Based on these results, a methodological approach was defined and applied in two occupational situations where diesel and other combustion particles are present (toll station in a tunnel and mechanical yard for bus reparation). Results : Teflon filters loaded with diesel particles were found more suitable for the DTT assay, due to their better chemical inertness compared to quartz filters: after storage durations larger than 150 hours, an increased reactivity toward DTT was observed only with quartz filters. Reactivity was linearly correlated to the loaded mass until about 1000 μg/filter. Different redox reactivities were determined in both working places, with the mechanical yard presenting a higher DTT consumption rate. Discussion and conclusions : These results demonstrate the feasibility of this method to determine the oxidative potential of fine/ultrafine particles in occupational situations. We propose to include this approach for hazard assessment of work places with exposure to manufactured and other NP.

Chemical genetic analysis of cdc2p : new insights into the regulation of cytokinesis in "Schizosaccharomyces pombe"

RÉSUMÉ La protéine kinase cyciine-cdc2p (Cdk) joue un rôle fondamental dans la progression du cycle cellulaire dans la levure de fission Schizosaccharomyces pombe. Nous avons étudié le rôle de cdc2p dans la régulation de la cascade de septation ou SIN (septation initiation network) en mitose et en méiose. Le SIN contrôle l'initiation de la cytokinèse à la fin de la mitose, et est supposé être négativement régulé par cdc2p. Nous avons mutagénéisé le site actif de cdc2p afin qu'il puisse lier un analogue de l'ATP (PP1) qui agit comme inhibiteur. Cet analogue ne peut pas lier la kinase de type sauvage. Cette approche dite «chemical genetics» permet une meilleure résolution temporelle comparée à l'approche classique utilisant les mutants sensibles à une température élevée. Nous avons montré que ce mutant cdc2-as (analogue sensitive) est fonctionnel et que, in vitro, l'activité kinase est inhibée en présence de l'analogue. Les cellules portant cette mutation, contrairement aux cellules de type sauvage s'arrêtent de manière irréversible soit en G2 soit en G1 et G2, suivant la concentration de l'inhibiteur. L'inactivation de cdc2p-as dans des cellules arrêtées en métaphase conduit au recrutement asymétrique des protéines du SIN sur le pôle du fuseau mitotique et au recrutement des composants du SIN, ainsi que de la ß-(1,3)glucan synthase à l'anneau contractile. De plus, nos résultats montrent que l'orthologue de la phosphatase cdc14p dans S. pombe, fip1p/clp1p, joue un rôle dans la régulation de la localisation des protéines du SIN suite à l'inactivation de cdc2p. Finalement, l'activité de cdc2p est requise pour maintenir la polo-like kinase plo1p sur les pôles du fuseau mitotique dans les premiers stages de la mitose. C'est pourquoi nous concluons que l'inactivation de cdc2p est suffisante pour activer le SIN et promouvoir la cytokinèse. Dans une étude séparée, nous avons caractérisé des potentiellement nouveaux composants ou régulateurs du SIN qui ont été isolés dans deux criblages génétiques visant à isoler des mutants atténuants la signalisation du SIN. Summary : The cyclin dependent protein kinase (Cdk) cdc2p plays a central role in the cell cycle progression of fission yeast Schizosaccharomyces pombe. We have studied the role of cdc2p in regulating the septation initiation network (SIN) in mitosis and meiosis. The SIN regulates the initiation of cytokinesis at the end of mitosis and is thought to be inhibited by cdc2p. We have mutated the active site of cdc2p to permit binding of an inhibitory ATP analogue (PP1), which is unable to bind unmodified kinases. This "chemical genetic" approach provides a much higher temporal resolution than it can be achieved with classical temperature-sensitive mutants. We demonstrate that cdc2-as (analogue sensitive) is functional and that addition of PP1 inhibits cdc2p kinase activity in vitro. Cells carrying the cdc2-as allele, but not cdc2+, undergo reversible cell cycle arrest following addition of PP1 either in G2, or at both major commitment points in the cell cycle (G1 and G2), depending upon the concentration of PP1. Inactivation of cdc2p-as in cells arrested in early mitosis promotes both the asymmetric recruitment of SIN proteins to the spindle pole bodies (SPBs), and the recruitment of the most downstream SIN components and ß-(1,3)-glucan synthase to the contractile ring. Furthermore, our results indicate that the S. pombe orthologue of Cdc14p, flp1p/clp1p, plays a role in regulating the relocalisation of SIN proteins following inactivation of cdc2p, and that cdc2p activity is required to retain the polo like kinase plot p on the SPBs in early mitosis. Thus, we conclude that inactivation of cdc2p is sufficient to activate the SIN and to promote cytokinesis. In a separate study, we have initially characterised potential novel components or regulators of the SIN pathway identified by two genetic screens for mutants attenuating SIN signaling.

Siliceous deep-sea sponge Monorhaphis chuni: A potential paleoclimate archive in ancient animals

The deep-sea sponge Monorhaphis chuni forms giant basal spicules, which can reach lengths of 3 m; they represent the largest biogenic silica structures on Earth that is formed from an individual metazoan. The spicules offer a unique opportunity to record environmental change of past oceanic and climatic conditions. A giant spicule collected in the East China Sea in a depth of 1110 m was investigated. The oxygen isotopic composition and Mg/Ca ratios determined along center-to-surface segments are used as geochemical proxies for the assessment of seawater paleotemperatures. Calculations are based on the assumption that the calculated temperature near the surface of the spicule is identical with the average ambient temperature of 4 degrees C. A seawater temperature of 1.9 degrees C is inferred for the beginning of the lifespan of the Monorhaphis specimen. The temperature increases smoothly to 2.3 degrees C, to be followed by sharply increased and variable temperatures up to 6-10 degrees C. In the outer part of the spicule, the inferred seawater temperature is about 4 degrees C. The lifespan of the spicule can be estimated to 11,000 +/- 3000 years using the long-term trend of the inferred temperatures fitted to the seawater temperature age relationships since the Last Glacial Maximum. Specimens of Monorhaphis therefore represents one the oldest living animals on Earth. The remarkable temperature spikes of the ambient seawater occurring 9500-3100 years B.P. are explained by discharges of hydrothermal fluids in the neighborhood of the spicule. The irregular lamellar organization of the spicule and the elevated Mn concentrations during the high-temperature growth are consistent with a hydrothermal fluid input. (C) 2012 Elsevier B.V. All rights reserved.