On the relative efficiency of different shaped otter boards

Rectangular, horizontal curved and oval otter boards were tested under identical fishing conditions and their relative efficiency ascertained on the basis of towing tension and the horizontal opening of the boards. While the tension in the warps with the different otter boards was not significant, the horizontal curved board gave increased lateral spread to the net.

On the relative catch efficiency of different shaped otter boards in bottom trawling

Three different types of otter boards varying in shape were tried to find out their relative catch efficiency. They were operated with two types of nets. The results indicated that the curved otter boards gave more catch per unit effort with all the combinations of nets and riggings tried.

The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Results of comparative fishing trials with rectangular flat and rectangular curved otter boards

The communication deals with the results of comparative fishing operations conducted to study the effectiveness of rectangular flat and rectangular curved otter boards. Based on the analysis of data gathered during the course of actual field trials, following conclusions have been drawn: the average catch per hour of trawling was more by 22 kg during attachment of rectangular curved otter boards. The average horizontal spread between rectangular curved otter boards in action was more by 13% and works out to 50% of the head-rope length of the net including sweeps. The towing resistance of the gear with horizontally curved otter boards was more by 10%.

Unified circuit model for the polysilicon TFT

This paper proposes two methods to improve the modelling of thin film transistors (TFTs). The first involves integrating Poissons equation numerically, given a density of trap states and other relevant material parameters including a constant mobility. Theresult is conductance as a numerical function of gate voltage. The second method recognizes that the data for areal conductance found by numerical integration, may easily be found by measurement without making assumptions about the density of trap states.

A unified circuit model for the polysilicon thin film transistor

This paper describes a unified approach to modelling the polysilicon thin film transistor (TFT) for the purposes of circuit design. The approach uses accurate methods of predicting the channel conductance and then fitting the resulting data with a polynomial. Two methods are proposed to find the channel conductance: a device model and measurement. The approach is suitable because the TFT does not have a well defined threshold voltage. The polynomial conductance is then integrated generally to find the drain current and channel charge, necessary for a complete circuit model. © 1991 The Japan Society of Applied Physics.

Accurate GTO model for circuit simulations

The GTO model presented in this paper uses analytical expressions to describe the internal physics of the device. It has been implemented to run as compiled code in the SPICE simulation package and as a MAST template in the Saber simulator. A rigorous comparison of measured simulated waveforms and performance parameters (including turn-off energies) for a 3000A device is described and discussed.

Numerical analysis of the coupled circuit and cooling holes for an electromagnetic shaker

This paper presents a time-stepping shaker modeling scheme. The new method improves the accuracy of analysis of armature-position-dependent inductances and force factors, analysis of axial variation of current density in copper plates (short-circuited turns), and analysis of cooling holes in the magnetic circuit. Linear movement modeling allows armature position to be precisely included in the shaker analysis. A more accurate calculation of eddy currents in the coupled circuit is in particular crucial for the shaker analysis in a mid-or high-frequency operation range. Large currents in a shaker, including eddy currents, incur large Joule losses, which in turn require the use of a cooling system to keep temperature at bay. Sizable cooling holes have influence on the saturation state of iron poles, and hence have to be properly taken into account.

Destruction-free parameter extraction for a physics-based circuit simulator IGCT model

This paper presents a practical destruction-free parameter extraction methodology for a new physics-based circuit simulator buffer-layer Integrated Gate Commutated Thyristor (IGCT) model. Most key parameters needed for this model can be extracted by one simple clamped inductive-load switching experiment. To validate this extraction method, a clamped inductive load switching experiment was performed, and corresponding simulations were carried out by employing the IGCT model with parameters extracted through the presented methodology. Good agreement has been obtained between the experimental data and simulation results.