Mucoadhesive and elastic films based on blends of chitosan and hydroxyethylcellulose

Mucoadhesive polymeric films have been prepared based on blends of chitosan and hydroxyethylcellulose. The blends have been characterized by IR spectroscopy, DSC, WAXD, TGA, SEM, and mechanical testing. It is demonstrated that the mechanical properties of chitosan are improved significantly upon blending with hydroxyethylcellulose. An increase in hydroxyethylcellulose content in the blends makes the materials more elastic. The thermal treatment of the blends at 100 degrees C leads to partial cross-linking of the polymers and formation of water-insoluble but swellable materials. The adhesion of the films towards porcine buccal mucosa decreases with increasing hydroxyethylcellulose content in the blends.

A global blended tropopause based on ERA data, Part I: Climatology

A new tropopause definition, based on a flow-dependent blending of the traditional thermal tropopause with one based on potential vorticity, has been developed. The benefits of such a blending algorithm are most apparent in regions with synoptic scale fluctuations between tropical and extratropical airmasses. The properties of the local airmass determine the relative contributions to the location of the blended tropopause, rather than this being determined by a specified function of latitude. Global climatologies of tropopause height, temperature, potential temperature and zonal wind, based on European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA) ERA-Interim data, are presented for the period 1989-2007. Features of the seasonal-mean tropopause are discussed on a global scale, alongside a focus on selected monthly climatologies for the two high latitude regions and the tropical belt. The height differences between climatologies based on ERA-Interim and ERA-40 data are also presented. Key spatial and temporal features seen in earlier climatologies, based mainly on the World Meteorological Organization thermal tropopause definition, are reproduced with the new definition. Tropopause temperatures are consistent with those from earlier climatologies, despite some differences in height in the extratropics.

A global blended tropopause based on ERA data, Part II: trends and tropical broadening

A new tropopause definition involving a flow-dependent blending of the traditional thermal tropopause with one based on potential vorticity has been developed and applied to the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalyses (ERA), ERA-40 and ERA-Interim. Global and regional trends in tropopause characteristics for annual and solsticial seasonal means are presented here, with emphasis on significant results for the newer ERA-Interim data for 1989-2007. The global-mean tropopause is rising at a rate of 47 m decade−1 , with pressure falling at 1.0 hPa decade−1 , and temperature falling at 0.18 K decade−1 . The Antarctic tropopause shows decreasing heights,warming,and increasing westerly winds. The Arctic tropopause also shows a warming, but with decreasing westerly winds. In the tropics the trends are small, but at the latitudes of the sub-tropical jets they are almost double the global values. It is found that these changes are mainly concentrated in the eastern hemisphere. Previous and new metrics for the rate of broadening of the tropics, based on both height and wind, give trends in the range 0.9◦ decade−1 to 2.2◦ decade−1 . For ERA-40 the global height and pressure trends for the period 1979-2001 are similar: 39 m decade−1 and -0.8 hPa decade−1. These values are smaller than those found from the thermal tropopause definition with this data set, as was used in most previous studies.

Fusion of infrared polarization and intensity images using support value transform and fuzzy combination rules

Infrared polarization and intensity imagery provide complementary and discriminative information in image understanding and interpretation. In this paper, a novel fusion method is proposed by effectively merging the information with various combination rules. It makes use of both low-frequency and highfrequency images components from support value transform (SVT), and applies fuzzy logic in the combination process. Images (both infrared polarization and intensity images) to be fused are firstly decomposed into low-frequency component images and support value image sequences by the SVT. Then the low-frequency component images are combined using a fuzzy combination rule blending three sub-combination methods of (1) region feature maximum, (2) region feature weighting average, and (3) pixel value maximum; and the support value image sequences are merged using a fuzzy combination rule fusing two sub-combination methods of (1) pixel energy maximum and (2) region feature weighting. With the variables of two newly defined features, i.e. the low-frequency difference feature for low-frequency component images and the support-value difference feature for support value image sequences, trapezoidal membership functions are proposed and developed in tuning the fuzzy fusion process. Finally the fused image is obtained by inverse SVT operations. Experimental results of visual inspection and quantitative evaluation both indicate the superiority of the proposed method to its counterparts in image fusion of infrared polarization and intensity images.

South Korean MNEs' international HRM approach: hybridization of global standards and local practices

This paper analyses the international Human Resource Management (HRM) approaches of Korean Multinational Enterprises (MNEs). Through a study of nine major Korean MNEs’ approaches to subsidiary-HRM, it is argued that the firms pursue hybridization through a blending of localization and global standardization across detailed elements in five broad HRM practice areas. Local discretion is allowed if not counter to global HRM system requirements and “global best practices” used as the template for global standardization of selected HRM elements. This strategic orientation appears to be part of a deliberate response to the “liabilities of origin” born by firms from non-dominant economies.

The four pillars of corporate responsibility: ethics, leadership, personal responsibility and trust

Purpose – This paper aims to examine how to further embed CSR thinking and practice into corporations, particularly in emerging markets, by reviewing and drawing similarities between key issues faced by all senior managers, namely ethics, leadership, personal responsibility and trust. Design/methodology/approach – This paper presents a conceptual exploration of global CSR practices using social psychology and overlays this concept with strategic and institutional theory in order to encourage new ways of thinking about CSR adoption, especially in emerging markets. Findings – The paper reveals the importance of shareholder needs on global corporate decision making and applies alternative conceptual models to help businesses to devise better CSR practices and individuals to align their actions to their own values. Originality/value – This paper strongly argues for blending different theoretical foundations from the management and organization literature in order to draw comparisons between current global CSR practice and the potential for its further adoption in emerging markets.

Jersey milk suitability for Cheddar cheese production: process, yield, quality and financial impacts

The aim of this study was to first evaluate the benefits of including Jersey milk into Holstein-Friesian milk on the Cheddar cheese making process and secondly, using the data gathered, identify the effects and relative importance of a wide range of milk components on milk coagulation properties and the cheese making process. Blending Jersey and Holstein-Friesian milk led to quadratic trends on the size of casein micelle and fat globule and on coagulation properties. However this was not found to affect the cheese making process. Including Jersey milk was found, on a pilot scale, to increase cheese yield (up to + 35 %) but it did not affect cheese quality, which was defined as compliance with the legal requirements of cheese composition, cheese texture, colour and grading scores. Profitability increased linearly with the inclusion of Jersey milk (up to 11.18 p£ L-1 of milk). The commercial trials supported the pilot plant findings, demonstrating that including Jersey milk increased cheese yield without having a negative impact on cheese quality, despite the inherent challenges of scaling up such a process commercially. The successful use of a large array of milk components to model the cheese making process challenged the commonly accepted view that fat, protein and casein content and protein to fat ratio are the main contributors to the cheese making process as other components such as the size of casein micelle and fat globule were found to also play a key role with small casein micelle and large fat globule reducing coagulation time, improving curd firmness, fat recovery and influencing cheese moisture and fat content. The findings of this thesis indicated that milk suitability for Cheddar making could be improved by the inclusion of Jersey milk and that more compositional factors need to be taken into account when judging milk suitability.

An ASIFT-based local registration method for satellite imagery

Imagery registration is a fundamental step, which greatly affects later processes in image mosaic, multi-spectral image fusion, digital surface modelling, etc., where the final solution needs blending of pixel information from more than one images. It is highly desired to find a way to identify registration regions among input stereo image pairs with high accuracy, particularly in remote sensing applications in which ground control points (GCPs) are not always available, such as in selecting a landing zone on an outer space planet. In this paper, a framework for localization in image registration is developed. It strengthened the local registration accuracy from two aspects: less reprojection error and better feature point distribution. Affine scale-invariant feature transform (ASIFT) was used for acquiring feature points and correspondences on the input images. Then, a homography matrix was estimated as the transformation model by an improved random sample consensus (IM-RANSAC) algorithm. In order to identify a registration region with a better spatial distribution of feature points, the Euclidean distance between the feature points is applied (named the S criterion). Finally, the parameters of the homography matrix were optimized by the Levenberg–Marquardt (LM) algorithm with selective feature points from the chosen registration region. In the experiment section, the Chang’E-2 satellite remote sensing imagery was used for evaluating the performance of the proposed method. The experiment result demonstrates that the proposed method can automatically locate a specific region with high registration accuracy between input images by achieving lower root mean square error (RMSE) and better distribution of feature points.

Molecular design of a discrete chain-folding polyimide for controlled inkjet deposition of supramolecular polymers

A supramolecular polymer based upon two complementary polymer components is formed by sequential deposition from solution in THF, using a piezoelectric drop-on-demand inkjet printer. Highly efficient cycloaddition or ‘click’ chemistry afforded a well-defined poly(ethylene glycol) featuring chain-folding diimide end groups, which possesses greatly enhanced solubility in THF relative to earlier materials featuring random diimide sequences. Blending the new polyimide with a complementary poly(ethylene glycol) system bearing pyrene end groups (which bind to the chain-folding diimide units) overcomes the limited solubility encountered previously with chain-folding polyimides in inkjet printing applications. The solution state properties of the resulting polymer blend were assessed via viscometry to confirm the presence of a supramolecular polymer before depositing the two electronically complementary polymers by inkjet printing techniques. The novel materials so produced offer an insight into ways of controlling the properties of printed materials through tuning the structure of the polymer at the (supra)molecular level.

The blended approach to real estate allocations: performance implications of combining an exposure to German Spezialfonds with Global Listed Real Estate Securities

This paper seeks to increase the understanding of the performance implications for investors who choose to combine an unlisted real estate portfolio (in this case German Spezialfonds) with a (global) listed real estate element. We call this a “blended” approach to real estate allocations. For the avoidance of doubt, in this paper we are dealing purely with real estate equity (listed and unlisted) allocations, and do not incorporate real estate debt (listed or unlisted) or direct property into the process. A previous paper (Moss and Farrelly 2014) showed the benefits of the blended approach as it applied to UK Defined Contribution Pension Schemes. The catalyst for this paper has been the recent attention focused on German pension fund allocations, which have a relatively low (real estate) equity content, and a high bond content. We have used the MSCI Spezialfonds Index as a proxy for domestic German institutional real estate allocations, and the EPRA Global Developed Index as a proxy for a global listed real estate allocation. We also examine whether a rules based trading strategy, in this case Trend Following, can improve the risk adjusted returns above those of a simple buy and hold strategy for our sample period 2004-2015. Our findings are that by blending a 30% global listed portfolio with a 70% allocation (as opposed to a typical 100% weighting) to Spezialfonds, the real estate allocation returns increase from 2.88% p.a. to 5.42% pa. Volatility increases, but only to 6.53%., but there is a noticeable impact on maximum drawdown which increases to 19.4%. By using a Trend Following strategy raw returns are improved from 2.88% to 6.94% p.a. , The Sharpe Ratio increases from 1.05 to 1.49 and the Maximum Drawdown ratio is now only 1.83% compared to 19.4% using a buy and hold strategy . Finally, adding this (9%) real estate allocation to a mixed asset portfolio allocation typical for German pension funds there is an improvement in both the raw return (from 7.66% to 8.28%) and the Sharpe Ratio (from 0.91 to 0.98).

Short communication: estimation of the financial benefit of using Jersey milk at different inclusion rates for Cheddar cheese production using partial budgeting

Partial budgeting was used to estimate the net benefit of blending Jersey milk in Holstein-Friesian milk for Cheddar cheese production. Jersey milk increases Cheddar cheese yield. However, the cost of Jersey milk is also higher; thus, determining the balance of profitability is necessary, including consideration of seasonal effects. Input variables were based on a pilot plant experiment run from 2012 to 2013 and industry milk and cheese prices during this period. When Jersey milk was used at an increasing rate with Holstein-Friesian milk (25, 50, 75, and 100% Jersey milk), it resulted in an increase of average net profit of 3.41, 6.44, 8.57, and 11.18 pence per kilogram of milk, respectively, and this additional profit was constant throughout the year. Sensitivity analysis showed that the most influential input on additional profit was cheese yield, whereas cheese price and milk price had a small effect. The minimum increase in yield, which was necessary for the use of Jersey milk to be profitable, was 2.63, 7.28, 9.95, and 12.37% at 25, 50, 75, and 100% Jersey milk, respectively. Including Jersey milk did not affect the quantity of whey butter and powder produced. Althoug further research is needed to ascertain the amount of additional profit that would be found on a commercial scale, the results indicate that using Jersey milk for Cheddar cheese making would lead to an improvement in profit for the cheese makers, especially at higher inclusion rates.

Biobased films prepared from NaOH/thiourea aqueous solution of chitosan and linter cellulose

In the present study, films based on linter cellulose and chitosan were prepared using an aqueous solution of sodium hydroxide (NaOH)/thiourea as the solvent system. The dissolution process of cellulose and chitosan in NaOH/thiourea aqueous solution was followed by the partial chain depolymerization of both biopolymers, which facilitates their solubilization. Biobased films with different chitosan/cellulose ratios were then elaborated by a casting method and subsequent solvent evaporation. They were characterized by X-ray analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermal analysis, and tests related to tensile strength and biodegradation properties. The SEM images of the biofilms with 50/50 and 60/40 ratio of chitosan/cellulose showed surfaces more wrinkled than the others. The AFM images indicated that higher the content of chitosan in the biobased composite film, higher is the average roughness value. It was inferred through thermal analysis that the thermal stability was affected by the presence of chitosan in the films; the initial temperature of decomposition was shifted to lower levels in the presence of chitosan. Results from the tests for tensile strength indicated that the blending of cellulose and chitosan improved the mechanical properties of the films and that an increase in chitosan content led to production of films with higher tensile strength and percentage of elongation. The degradation study in a simulated soil showed that the higher the crystallinity, the lower is the biodegradation rate.

The Cultural Construction of the Maine Sporting Camps

Maine sporting camps were a cultural and social phenomenon of the urban upper and middle class. They originated in Maine in the late 1870s and early 1880s and reached their zenith around the turn of the century with over 160 in operation in eight of the sixteen counties in Maine in 1906. The period from 1880 until World War I can be considered the 'golden era' of the Maine sporting camps. After the war, with technological advancements such as the outboard motor, the proliferation of the automobile, and the introduction of a road system into rural Maine, the camps underwent significant change that warrants an entirely different cultural analysis. A number of elements came together to produce a cultural atmosphere permissive of sporting camp creation in Maine. These include changing national views upon nature, health, sport and the leisure time in which to pursue them. In the late nineteenth century, with the rise of large industrially based cities, overcrowding fostered crime and disease. An upper and middle class emerged that desired escape and separation from the lower classes. Maine was chosen for such an escape because it offered, through sporting camps, a chance to "get back to nature," by pursuing the healthful activities of hunting and fishing. At the same time these urban sportsmen and sportswomen distinguished themselves on the social Hierarchical scale from the rural inhabitants. What happened in rural Maine during the period between 1880 and World War I was the introduction of a new cultural order on the landscape. Coming primarily from urban centers on the East Coast of the United States were men, women and children who looked to Maine for vacations. These vacations were designed to put them in touch with nature by pursuing healthful activities, especially those of fishing and hunting. Coming from an environment that emphasized social standing, they ensured that these trips would perpetuate this hierarchy. They experienced nature through the Maine sporting camps, which provided them with the services and skills necessary to experience it while enjoying a degree of luxury that they were accustomed to in the urban world. The Maine sporting camps were a cultural manifestation of the urban upper and middle class, the groups that the camps were established to serve. Despite this the camps did not represent a structural duplication of urban society. Instead, the camps represented a cultural construction that was produced by interaction between members of two different conceptual and physical worlds, the blending of which, on a social level, was determined by urban mentality and rural knowledge. In the production of a cultural world meaningful to the clients, the rural world of the Maine woods was altered to meet their needs. It was not a one-sided process, however, as the clients were forced to acknowledge the importance of the rural inhabitants on the basis of their value to the clients.

Ethics in a capitalistic society

The problem of semantics is inherent in any discussion of ethics. The general term "ethics" is itself commonly confused. In addition, systems of ethics must be built upon assumptions, and assumptions are necessarily subject to lengthy debate. These two problems are encountered in my investigation of the ethical practices of the modern business community and to remedy the situation I have taken two steps: the first being an attempt to clarify the meaning of terms used therein;-and the second being a clear description of the assumptions utilized to further my analysis. To satisfy those who would disagree with these assumptions, I have attempted to outline the consequences of differing premises. The first assumption in my discussion is that the capitalistic economy is powered by the motivation supplied by man's self-interest. We are conditioned to basing our courses of action upon an orientation toward gratifying this self-interest. Careers are chosen by blending aptitude, interest, and remuneration. of course, some people are less materially inclined than others, but the average member of our capitalistic society is concerned with the physical rewards derived from his employment. Status and happiness are all-important considerations in pursuing a chosen course of action, yet all too often they are measured in physical terms. The normal self-interest natural to mankind is heightened in capitalism, due to the emphasis placed upon material compensation. Our thinking becomes mechanistic as life devolves into a complex game played by the rules. We are accustomed to performing meaningless or unpleasant duties to fulfill our gratifications. Thought, consequently, interferes with the completion of our everyday routines. We learn quickly not to be outspoken, as the outspoken one threatens the security of his fellow man. The majority of the people are quite willing to accept others views on morality, and indeed this is the sensible thing to do as one does not risk his own neck. The unfortunate consequence of this situation has been the substitution of the legal and jural for the moral and ethical. Our actions are guided by legal considerations and nowhere has this been more evident than in the business community. The large legal departments of modern corporations devote full time to inspecting the legality of corporate actions. The business community has become preoccupied with the law, yet this is necessarily so. Complex, modern, capitalistic society demands an elaborate framework of rules and regulations. Without this framework it would be impossible to have an orderly economy, to say nothing of protecting the best interests of the people. However, the inherent complexities, contradictions, and sometimes unfair aspects of our legal system can tempt men to take things into their own hands. From time to time cases arise where men have broken laws while acting in good faith, and other cases where men have been extremely unethical without being illegal. Examples such as these foster the growth of cynicism, and generally create an antagonistic attitude toward the law on the part of business. My second assumption is that the public, on the whole, has adopted an apathetic attitude toward business morality. when faced with an ethical problem, far too many people choose to cynically assume that, if I don't do it someone else will. "The danger of such an assumption lies in that it eliminates many of the inhibitions that normally would preclude unethical action. The preventative factor in contemplating an unethical act not only lies in it going against the "right course of action", but also in that it would display the actor as one of the few, immoral practitioners. However, if the contemplator feels that many other people follow the same course of action, he would not feel himself to be so conspicuous. These two assumptions underly my entire discussion of modern business ethics., and in my judgment are the two most important causal factors in unethical acts perpetrated by the business community. The future elimination of these factors seems improbable, if not futile, yet there is no reason to consider things worse than they ever have been before. The heightened public interest in business morality undoubtedly lies in part in the fact that examples of corporate malpractice are of such magnitude in scope, and hence more newsworthy.

Combining Satellite And Gauge Precipitation Data With Co-Kriging Method For Jakarta Region

Jakarta is vulnerable to flooding mainly caused by prolonged and heavy rainfall and thus a robust hydrological modeling is called for. A good quality of spatial precipitation data is therefore desired so that a good hydrological model could be achieved. Two types of rainfall sources are available: satellite and gauge station observations. At-site rainfall is considered to be a reliable and accurate source of rainfall. However, the limited number of stations makes the spatial interpolation not very much appealing. On the other hand, the gridded rainfall nowadays has high spatial resolution and improved accuracy, but still, relatively less accurate than its counterpart. To achieve a better precipitation data set, the study proposes cokriging method, a blending algorithm, to yield the blended satellite-gauge gridded rainfall at approximately 10-km resolution. The Global Satellite Mapping of Precipitation (GSMaP, 0.1⁰×0.1⁰) and daily rainfall observations from gauge stations are used. The blended product is compared with satellite data by cross-validation method. The newly-yield blended product is then utilized to re-calibrate the hydrological model. Several scenarios are simulated by the hydrological models calibrated by gauge observations alone and blended product. The performance of two calibrated hydrological models is then assessed and compared based on simulated and observed runoff.