Genetic, prenatal and postnatal determinants of weight gain and obesity in young children – The STEPS Study

Genetic, Prenatal and Postnatal Determinants of Weight Gain and Obesity in Young Children – The STEPS Study University of Turku, Faculty of Medicine, Department of Paediatrics, University of Turku Doctoral Program of Clinical Investigation (CLIPD), Turku Institute for Child and Youth Research. Conditions of being overweight and obese in childhood are common health problems with longlasting effects into adulthood. Currently 22% of Finnish boys and 12% of Finnish girls are overweight and 4% of Finnish boys and 2% of Finnish girls are obese. The foundation for later health is formed early, even before birth, and the importance of prenatal growth on later health outcomes is widely acknowledged. When the mother is overweight, had high gestational weight gain and disturbances in glucose metabolism during pregnancy, an increased risk of obesity in children is present. On the other hand, breastfeeding and later introduction of complementary foods are associated with a decreased obesity risk. In addition to these, many genetic and environmental factors have an effect on obesity risk, but the clustering of these factors is not extensively studied. The main objective of this thesis was to provide comprehensive information on prenatal and early postnatal factors associated with weight gain and obesity in infancy up to two years of age. The study was part of the STEPS Study (Steps to Healthy Development), which is a follow-up study consisting of 1797 families. This thesis focused on children up to 24 months of age. Altogether 26% of boys and 17% of girls were overweight and 5% of boys and 4% of girls were obese at 24 months of age according to New Finnish Growth references for Children BMI-for-age criteria. Compared to children who remained normal weight, the children who became overweight or obese showed different growth trajectories already at 13 months of age. The mother being overweight had an impact on children’s birth weight and early growth from birth to 24 months of age. The mean duration of breastfeeding was almost 2 months shorter in overweight women in comparison to normal weight women. A longer duration of breastfeeding was protective against excessive weight gain, high BMI, high body weight and high weight-for-length SDS during the first 24 months of life. Breast milk fatty acid composition differed between overweight and normal weight mothers, and overweight women had more saturated fatty acids and less n-3 fatty acids in breast milk. Overweight women also introduced complementary foods to their infants earlier than normal weight mothers. Genetic risk score calculated from 83 obesogenic- and adiposity-related single nucleotide polymorphisms (SNPs) showed that infants with a high genetic risk for being overweight and obese were heavier at 13 months and 24 months of age than infants with a low genetic risk, thus possibly predisposing to later obesity in obesogenic environment. Obesity Risk Score showed that children with highest number of risk factors had almost 6-fold risk of being overweight and obese at 24 months compared to children with lowest number of risk factors. The accuracy of the Obesity Risk Score in predicting overweight and obesity at 24 months was 82%. This study showed that many of the obesogenic risk factors tend to cluster within children and families and that children who later became overweight or obese show different growth trajectories already at a young age. These results highlight the importance of early detection of children with higher obesity risk as well as the importance of prevention measures focused on parents. Keywords: Breastfeeding, Child, Complementary Feeding, Genes, Glucose metabolism, Growth, Infant Nutrition Physiology, Nutrition, Obesity, Overweight, Programming

Reduction of carcass weight loss in swines

The carcass fast freezing is one of the aspects of great prominence to the final quality of pork. In order to reduce weight loss, two experiments were performed, in which the carcasses were monitored during 20 hours to evaluate the main variables involved during two different freezing processes (standard and proposed) as follows: microbiological quality, storage temperature, relative humidity (RH) and air velocity. In experiment I, the carcasses were submitted to a system using heat shock (2 hours in static tunnel at - 25 °C) and subsequently sent to the equalization chamber. In experiment II, the carcasses were submitted to the heat shock and stored in a chamber with RH between 80-85%. The chambers used in both experiments showed no change in the variables studied (internal temperature of 5 °C and air velocity of approximately 0.3 m/s). However, the relative humidity in the three chambers was evaluated and significant differences were found; as a consequence, high levels of weight loss were observed in both chambers In experiment II there was an increase of RH, which reduced the weight loss of the carcasses.

Weldability of high strength aluminium alloys

The need for reduced intrinsic weight of structures and vehicles in the transportation industry has made aluminium research of interest. Aluminium has properties that are favourable for structural engineering, including good strength-to-weight ratio, corrosion resistance and machinability. It can be easily recycled saving energy used in smelting as compared to steel. Its alloys can have ultimate tensile strength of up to 750 MPa, which is comparable to steel. Aluminium alloys are generally weldable, however welding of high strength alloys like the 7xxx series pose considerable challenges. This paper presents research on the weldability of high strength aluminium alloys, principally the 7xxx series. The weldability with various weld processes including MIG, TIG, and FSW, is discussed in addition to consideration of joint types, weld defects and recommendations for minimizing or preventing weld defects. Experimental research was carried out on 7025-T6 and AW-7020 alloys. Samples were welded, and weld cross sections utilized in weld metallurgy studies. Mechanical tests were carried out including hardness tests and tensile tests. In addition, testing was done for the presence of Al2O3 on exposed aluminium alloy. It was observed that at constant weld heat input using a pulsed MIG system, the welding speed had little or no effect on the weld hardness. However, the grain size increased as the filler wire feed rate, welding current and welding speed increased. High heat input resulted in lower hardness of the weld profile. Weld preheating was detrimental to AW- 7020 welds; however, artificial aging was beneficial. Acceptable welds were attained with pulsed MIG without the removal of the Al2O3 layer prior to welding. The Al2O3 oxide layer was found to have different compositions in different aluminium alloys. These findings contribute useful additional information to the knowledge base of aluminium welding. The application of the findings of this study in welding will help reduce weld cost and improve high strength aluminium structure productivity by removing the need for pre-weld cleaning. Better understanding of aluminium weld metallurgy equips weld engineers with information for better aluminium weld design.

Using Tomato Analyzer software to determine embryo size in x-rayed seeds

A primary interest of image analysis of X-rayed seeds is to identify whether the extent of fill in the embryo cavity is associated with to seed physiological quality. The objective of this research was to verify the accuracy of the freely available Tomato Analyzer (TA) software developed at The Ohio State University to determine the ratio of embryo size over total seed area. Seeds of pumpkin, watermelon, cucumber and cotton were X-rayed and analyzed by the software which defines seed and embryo boundaries and automatically generates numerical values to quantify that ratio. Results showed that the TA has the sensitivity to evaluate the extent of embryo growth within the cucurbits and cotton seeds and is a promising alternative for this assessment in other seed species.

The association between body composition and arterial stiffness in peri-pubescent children

The objective of this study was to examine the association between body composition and arterial stiffuess in peri-pubescent boys and girls. Differences in arterial distensibility were measured in 68 children (45 normal weight, 12 overweight, and 11 obese) between the ages of9 to 12 years. Weight classification was based on age and gender-specific body mass index cut-offs, while pubertal maturation was self-reported using Tanner staging. Distensibility was determined using two-dimensional, B-Mode echo Doppler ultrasound to measure changes at the right common carotid artery (CCA) diameter changes, while carotid pulse pressure (cPP) was measured at the left CCA by applanation tonometry. One-way ANOV A analysis revealed significant differences (p<0.001) in all anthropometric measures between the normal weight and overweight children, as well as the normal weight and obese children. Body stature was only higher in obese children compared to normal weight children (p<0.01). No significant differences were found between groups regarding age or Tanner stage. Common carotid artery distensibility showed a significant difference (p<0.01) between normal weight children (0.008 ± 0.002 mmHg-1 ) compared to obese children (0.005 ± 0.002 mmHg-1 ), with a borderline significant difference between the normal and overweight subjects (p=0.06). There was no significant effect for gender between males and females across all independent variables. The strongest determinants of distensibility in children were cPP (r= -0.52, pratio explained 94% of the variance among peri-pubescent children. This study greatly underscores the need for weight management for long-term prevention of cardiovascular disease in overweight and obese children.

Weight-preoccupation, personality and depression in university students : an interactionist perspective

The present research was designed to examine Beck's (1983; 1987) cognitive diathesis-stress model of depression in a new context. Specifically, this cross-sectional study investigated whether Beck's cognitive-personality traits of sociotropy and autonomy interacted with a specific daily hassle/stressor, weightpreoccupation, in the prediction of depressed mood in women and men. Weightpreoccupation was chosen as the particular daily stressor, because, according to Kanner, Coyne, Schaeffer, and Lazarus (1981). concern about weight and physical appearance were two of the most troublesome daily hassles among university students. ContraIy to current stereotypes, men also express concerns with weight and appearance (Cash, Winstead, &, landi, 1986), in both the direction of weight loss and weight/muscle gain (Drewnowski &, Yee, 1987). Thus, unique to this study was the examination of weight-preoccupation in men, not only in the direction of weight loss, but also in the direction of weight and muscle gain. Two hundred and fifty-one undergraduates were administered the revised SociotropyAutonomy Scale (SAS), the Beck Depression Inventory (BDij, the Hassles and Uplifts Scale, the Eating Disorders Inventory (EDI), and the Restraint Scale (RS). Through a process of model building, a final model was devised in which depression (ie., BDI total scores) was regressed on personality (Le., SAS Sociotropy) and weight-preoccupation (i.e., Drive for Thinness, Body Dissatisfaction, and the Restraint Scale). Separate hierarchical multiple regression analyses, with BDI as the dependent variable, were carried out for each of the 2 3 weight-preoccupation variables. Results revealed a specific congruent interaction between weight,..preoccupation and personality. Specifically, drive for thinness and body dissatisfaction interacted with sociotropy to predict depressed mood in both women and men, but the interaction between sociotropy and the Restraint Scale was marginal. Findings suggested that weight-preoccupied women and men experienced depressed mood to the extent that they were characterized as more highly sociotropic. As predicted, personality (i.e., sociotropy), moderated the relationship between daily stress (i.e., weight-preoccupation) and depression. Thus, results revealed that the proposed diathesis-stress model seemed to operate in the same manner for women and men. Moreover, the examination of weightpreoccupation among men (i.e., in the direction of both weight loss and weight/muscle gain) further revealed that, when curvilinearity was taken into account, highly sociotropic men, who had a low desire to gain weight and muscle mass (i.e., most likely those who desired to lose weight), experienced higher levels of depressed mood than those who had a "medium" desire for weight and muscle gain. However, the highest levels of depressed mood was experienced by highly sociotropic men who were highly weight-preoccupied in the direction of wanting to gain weight and muscle mass. In addition, possible reasons for the present fmdings, as wen as iimitations and impiicalions for future research are discussed.

The role of intrapartum intravenous therapy and method of delivery on newborn weight loss : challenging the 7% rule

It is common practice to initiate supplemental feeding in newborns if body weight decreases by 7-10% in the first few days after birth (7-10% rule). Standard hospital procedure is to initiate intravenous therapy once a woman is admitted to give birth. However, little is known about the relationship between intrapartum intravenous therapy and the amount of weight loss in the newborn. The present research was undertaken in order to determine what factors contribute to weight loss in a newborn, and to examine the relationship between the practice of intravenous intrapartum therapy and the extent of weight loss post-birth. Using a cross-sectional design with a systematic random sample of 100 mother-baby dyads, we examined properties of delivery that have the potential to impact weight loss in the newborn, including method of delivery, parity, duration of labour, volume of intravenous therapy, feeding method, and birth attendant. This study indicated that the volume of intravenous therapy and method of delivery are significant predictors of weight loss in the newborn (R2=15.5, p<0.01). ROC curve analysis identified an intravenous volume cut-point of 1225 ml that would elicit a high measure of sensitivity (91.3%), and demonstrated significant Kappa agreement (p<0.01) with excess newborn weight loss. It was concluded that infusion of intravenous therapy and natural birth delivery are discriminant factors that influence excess weight loss in newborn infants. Acknowledgement of these factors should be considered in clinical practice.

Différence dans la qualité de l’alimentation en relation au risque d’excès de poids chez des populations autochtones canadiennes

L‘obésité constitue un problème de santé publique au Canada, particulièrement chez les populations autochtones où les prévalences les plus élevées ont été rapportées. D’après les écrits recensés, plusieurs méthodes ont été essayées pour étudier la relation entre l’alimentation et l’obésité, mais les résultats sont inconstants. Le but de cette thèse est d’identifier, en termes quantitatif et qualitatif, les différences dans l’alimentation des obèses et non-obèses. Pour y parvenir, nous avons développé une nouvelle méthode à l’aide d’une banque de données portant sur les enfants Mohawk de Kahnawake afin d’identifier les différences dans les choix alimentaires. Cette même méthode a été ensuite appliquée à deux autres banques de données (celle des adultes cris de la Baie James et celle des autochtones de l’enquête ESCC 2.2). Globalement, les résultats n’ont pas montré de différences significatives dans l’alimentation des participants selon les catégories d’IMC en considérant les indicateurs reliés à la quantité et à la qualité de l’alimentation comme l’apport énergétique total, l’apport énergétique en provenance des lipides, les fibres alimentaires, la densité énergétique et la diversité alimentaire. Par contre, les résultats de la nouvelle méthode fondée sur la sélection des items alimentaires fréquemment consommés par au moins 10 % des participants ont révélé que les enfants de Kahnawake à risque d’excès de poids consommaient plus fréquemment de croustilles (p=0.001) et moins fréquemment de craquelins que les enfants avec excès de poids ou ceux ayant un poids normal (p=0.015). Ensuite, en prenant la catégorie de poids normal comme référence, le rapport de côte (Odds ratio : OR) d’être à risque d’excès de poids était de 2.16 (95 % IC : 1.14 - 4.09) fois plus élevé chez les enfants de Kahnawake qui consommaient plus fréquemment de croustilles comparativement aux non-consommateurs de croustilles, et ce, après ajustement pour l’âge. Par contre, le rapport de côte d’être à risque d’excès de poids diminuait de 79 % (OR = 0.21; 95 % IC : 0.06 – 0.72) chez les enfants consommateurs de craquelins comparativement à leurs homologues non-consommateurs. Après avoir corrigé les quantités pour l’âge, on note que les enfants avec excès de poids consommaient plus de frites que les enfants à risque d’excès de poids ou ceux ayant un poids normal (p = 0.027). Chez les femmes cries, les résultats de la nouvelle méthode ont montré que le colorant à café était associé à un risque élevé d’obésité (OR = 4.64, 95 % IC : 1.04 - 0.54); alors que le lait faible en matières grasses était associé à un moindre risque d’embonpoint (OR = 0.38, 95 % IC : 0.17 - 0.82), après ajustement pour l’âge. Quant aux hommes cris, le lait entier était associé à un moindre risque d’avoir de l’embonpoint (OR ajusté pour l’âge = 0.38, 95 % IC : 0.20 - 0.71) et, en termes de quantité corrigée pour l’âge, les hommes obèses buvaient plus de boissons sucrées aux fruits comparativement aux hommes de poids normal ou ceux ayant de l’embonpoint (p=0.015). Selon les résultats de cette méthode appliquée aux données de l’enquête ESCC 2.2, les garçons à risque d’excès de poids ou avec excès de poids consommaient moins fréquemment de pain blanc que ceux de poids normal (p=0.048). En termes de quantité toutefois, ils consommaient plus de pain blanc (p=0.040), utilisaient plus de farine de blé (p=0.006) et de levure (p=0.002). Après avoir ajusté les quantités consommées pour l’âge et l’indice d’activité physique, les femmes avec embonpoint ou obèses utilisaient plus de farine de blé (p< 0.001) que leurs homologues de poids normal. Chez les hommes, il n'y avait pas de différences ni dans les fréquences de consommation ni dans les quantités consommées. Concernant les filles, leurs apports alimentaires n'étaient pas valides (facteur d'activité de Goldberg < 1.2 dans la catégorie embonpoint / obèse). Les résultats de cette méthode innovatrice pourraient d’une part, permettre d’axer la sensibilisation sur des aliments particuliers en plus des recommandations générales du Guide Alimentaire Canadien. D’autre part, ils nous renvoient aux données biologiques de laboratoire afin d’identifier les composantes des items susceptibles de contribuer au développement de l’obésité.

Effet de la N-acétylcystéine sur la dysfonction endothéliale des artères coronaires épicardiques associée à une hypertrophie ventriculaire gauche dans un modèle porcin

Effet positif de la N-acétylcystéine sur la dysfonction endothéliale des artères coronaires épicardiques associée à une hypertrophie ventriculaire gauche dans un modèle porcin A. A. HORN, M-C AUBIN, YF SHI, J-C TARDIF, M. CARRIER , L. P. PERRAULT INSTITUT DE CARDIOLOGIE DE MONTRÉAL, MONTRÉAL, CANADA, Objectif : Il a été démontré dans le laboratoire que dans notre modèle d’hypertrophie ventriculaire gauche, la dysfonction endothéliale est secondaire à une diminution de la biodisponibilité du NO, celle-ci étant causée par une augmentation du stress oxydant tel que démontré par Malo et al. (2003) et Aubin et al. (2006). Le but de la présente étude est d’étudier l’effet d’un traitement chronique de la N-acétylcystéine (NAC) (un antioxydant) sur la dysfonction endothéliale associée à une hypertrophie ventriculaire gauche (HVG). Méthodologie: L’HVG a été induite par cerclage aortique (CA) chez vingt-et-un porcelets âgés de deux mois qui furent divisés aléatoirement en quatre groupes expérimentaux. Le groupe témoin (groupe 1) a été soumis à une thoracotomie antérolatérale gauche sans cerclage aortique (n=3). Le groupe 2 a été soumis à un cerclage aortique pour une période de 60 jours (n=6). Le groupe 3 a subi un cerclage aortique et a reçu un traitement oral de N-acétylcystéine de 1000 mg/jour per os pendant 60 jours commençant le jour de la chirurgie (n=6). Le groupe 4 a été soumis à un cerclage aortique et a reçu un traitement oral de N-acétylcystéine : 1000 mg/par jour pendant 30 jours commençant le jour 30 (post-chirurgie) (n=6). L’hypertrophie fut évaluée par échocardiographie. La réactivité vasculaire fut étudiée à l’aide de chambres d’organes par la construction des courbes concentration-réponse à la sérotonine (5-HT: relaxations induites par les récepteurs 5-HT1D, couplés aux protéines Gi) et à la bradykinine (BK: relaxations induites par les récepteurs B2, couplés aux protéines Gq). Les quantités de nitrites/nitrates et la production basale de GMPc ont été mesurées pour évaluer la fonction endothéliale. Le stress oxydant a été étudié en quantifiant les concentrations plasmatiques d’hydroperoxydes lipidiques et de glutathion réduit, ainsi que l’activité plasmatique des enzymes antioxydantes peroxydase du glutathion et dismutase du superoxyde. Résultats: Le rapport masse ventricule gauche/masse corporelle était significativement plus élevé pour le groupe 2 comparativement au groupe 1 (p<0,05) confirmant la présence d’une HVG. Le développement de l’HVG dans le groupe 3 a pu être prévenu par la NAC et sa progression fut atténuée dans le groupe 4 (p<0,05 versus groupe 2). La présence de la dysfonction endothéliale a été confirmée chez le groupe 2, tel qu’illustré par une diminution significative des relaxations maximales à la 5-HT et à la BK comparativement au groupe témoin. Le traitement à la NAC a significativement potentialisé les relaxations maximales (p<0,05) induites par la sérotonine et par la bradykinine, chez les deux groupes traités. Cette amélioration des relaxations dépendantes de l’endothélium peut être la conséquence d’une augmentation significative (p<0,05) de la biodisponibilité du monoxyde d’azote pour les cellules musculaires lisses, tel que suggéré par l’augmentation du ratio nitrites/nitrates et de la production basale de GMPc chez les groupes 3 et 4 comparativement au groupe 2. Cette augmentation du facteur relaxant peut résulter d’une augmentation de sa production par les cellules endothéliales ou d’une diminution de sa neutralisation par les espèces réactives oxygénées. De fait, les concentrations d’hydroperoxydes lipidiques étaient significativement inférieures (p<0,05) et associées à une augmentation des concentrations de l’antioxydant glutathion réduit et de l’activité de la peroxydase du glutathion chez les deux groupes traités par rapport au groupe 2. Conclusion: Le traitement à la NAC prévient le développement de la dysfonction endothéliale coronaire ainsi que l’HVG qui lui est associée.

Effet du resvératrol sur la dysfonction endothéliale des artères coronaires épicardiques associée à l’hypertrophie ventriculaire gauche dans un modèle porcin.

Les propriétés antioxydantes du resvératrol sont d’un grand intérêt pour contrer la dysfonction endothéliale où la contribution du stress oxydant est majeure. Cette dysfonction endothéliale est d’ailleurs bien caractérisée en hypertrophie ventriculaire gauche (HVG). Cette étude vise à explorer les effets thérapeutiques du resvératrol sur la dysfonction endothéliale des artères coronaires épicardiques associée à l’HVG. L’HVG est induite suite à un cerclage aortique (CA) sur des porcelets de 2 mois. Le resvératrol est ensuite administré à 20 mg/kg/jour per os aux animaux répertoriés dans différents groupes. Le groupe 1 comprend les animaux contrôles sans CA alors que le groupe 2 représente les porcelets ayant subit le CA sans traitement. Le groupe 3 comprend les animaux traités pendant les 60 jours après la chirurgie alors que le groupe 4 est traité seulement à partir du 30ème jour jusqu’au jour 60. Des analyses échocardiographiques et histologiques ont été effectuées afin de déterminer le degré d’hypertrophie et l’impact du resvératrol sur la progression de l’HVG alors que la réactivité vasculaire a été évaluée par des expériences de chambres d’organes. La dysfonction endothéliale a été étudiée in vitro par quantification des métabolites nitriques et des niveaux de GMPc tandis que le stress oxydant est décrit par les niveaux d’angiotensine II (Ang II) et de protéines carbonylées. Les courbes dose-réponse à la sérotonine du groupe 3 traité pendant les 60 jours au resvératrol ont démontré une relaxation vasculaire significativement améliorée comparé au groupe 2 non-traité (p<0,05). Le pourcentage de changement du rapport de la masse du ventricule gauche sur la masse corporelle (LVmass/BW) a démontré une inhibition du développement de l’HVG dans le groupe 3 alors que le groupe 4 n’a pas eu d’effets bénéfiques des 30 jours de traitement au resvératrol. La biodisponibilité du NO représentée par la mesure de ses métabolites en circulation (398,71±21,74 ; 151,04±14,95 ; 241,86±15,53 ; 208,17±26,52 uM pour les groupes 1, 2, 3 et 4 respectivement, p<0,001 pour groupe 1 et 3 vs groupe 2) et par le niveau de GMPc a été augmentée avec l’administration du polyphénol (2,54±0,63 ; 0,67±0,45 ; 1,71±0,25 ; 1,98±0,29 pmol/ml pour les groupes 1, 2, 3 et 4 respectivement, p<0,05 pour groupe 1, 3 et 4 vs groupe 2). Le rôle antioxydant du resvératrol a été confirmé avec une réduction des niveaux de protéines carbonylées chez le groupe 3 comparé aux valeurs du groupe 2 (0,14±0,05 vs 0,33±0,03 nmol/mg respectivement) sans diminution des niveaux d’Ang II. Le resvératrol a aussi réduit l’hypertrophie des cardiomyocytes et la fibrose interstitielle. Ainsi, le resvératrol peut effectivement réduire la dysfonction endothéliale des artères coronaires épicardiques et limiter l’occurrence de remodelage myocardique associé à l’HVG, principalement à travers l’activation de la signalisation dépendante du NO.

Studies on the Flammability of Short Kevlar Fiber-Thermoplastic Polyurethane Composite

The flammability of short Kevlar aramide fiber-thermoplastic polyurethane (TPU) has been investigated with respect to fiber loading and various flame retardant additives such as halogen containing polymers, antimony oxide/chlorine donor combination, zinc borate, and aluminum hydroxide. Smoke generation was reduced drastically, while the oxygen index was reduced marginally in the presence of short fibers. The best improvement in the oxygen index was obtained with antimony oxide/chlorinated paraffin wax combination, in the weight ratio 1:6. A 70 phr loading of aluminum hydroxide improved LOI and reduced smoke generation.

Influvence of Alloying Additions on the Structure and Properties of Ai-7Si-0.3Mg Alloy

Cast Ai-Si alloys are widely used in the automotive, aerospace and general engineering industries due to their excellent combination of properties such as good castability, low coefficient of thermal expansion, high strength-to-weight ratio and good corrosion resistance. The present investigation is on the influence of alloying additions on the structure and properties of Ai-7Si-0.3Mg alloy. The primary objective of this present investigation is to study these beneficial effects of calcium on the structure and properties of Ai-7Si-0.3Mg-xFe alloys. The second objective of this work is to study the effects of Mn,Be and Sr addition as Fe neutralizers and also to study the interaction of Mn,Be,Sr and Ca in Ai-7Si-0.3Mg-xFe alloys. In this study the duel beneficial effects of Ca viz;modification and Fe-neutralization, comparison of the effects of Ca and Sr with common Fe neutralizers. The casting have been characterized with respect to their microstructure, %porosity and electrical conductivity, solidification behaviour and mechanical properties. One of the interesting observations in the present work is that a low level of calcium reduces the porosity compared to the untreated alloy. However higher level of calcium addition lead to higher porosity in the casting. An empirical analysis carried out for comparing the results of the present work with those of the other researchers on the effect of increasing iron content on UTS and % elongation of Ai-Si-Mg and Ai-Si-Cu alloys has shown a linear and an inverse first order polynomial relationships respectively.

Short Isora Fibre Reinforced Natural Rubber Composites

The present study deals with the short isora fibre reinforced natural rubber composites. In recent years there has been a tremendous advancement in the field of science and technology of short fibre reinforced polymer composites. The low density, high strength, high stiffness to weight ratio, excellent durability and design flexibility are the primary reasons for their use in many diversified fields such as air crafts, automobiles, marine industry etc. Compared to the various natural and synthetic fibres used as reinforcement for elastomer composites isora fibre is superior in many aspects. `Isora' is a natural lignocellulosic fibre which is easily available in South India especially in Kerala. The fibre is separated from the bark of the Helicteres isora plant by retting process. This fibre has excellent mechanical properties and is easily amenable to physical and chemical modifications. The study shows that composites with poor interfacial bonding tend to dissipate more energy than that with to interfacial bonding. The mechanical loss also can be related to interfacial bonding. The effect of chemical treatment of isora fibre on damping was also studied. Both in the low and high temperature region which indicates that this composite posseses low damping and hence good interfacial bonding characteristics. Hence these composites are better candidates for high damping applications. Composites with longitudinally oriented fibres showed high storage modulus than transversely oriented ones due to the effective stress transfer between fibre and matrix.

Performance Assessment of Sandwich Structures with Debonds and Dents

A sandwich construction is a special form of the laminated composite consisting of light weight core, sandwiched between two stiff thin face sheets. Due to high stiffness to weight ratio, sandwich construction is widely adopted in aerospace industries. As a process dependent bonded structure, the most severe defects associated with sandwich construction are debond (skin core bond failure) and dent (locally deformed skin associated with core crushing). Reasons for debond may be attributed to initial manufacturing flaws or in service loads and dent can be caused by tool drops or impacts by foreign objects. This paper presents an evaluation on the performance of honeycomb sandwich cantilever beam with the presence of debond or dent, using layered finite element models. Dent is idealized by accounting core crushing in the core thickness along with the eccentricity of the skin. Debond is idealized using multilaminate modeling at debond location with contact element between the laminates. Vibration and buckling behavior of metallic honeycomb sandwich beam with and without damage are carried out. Buckling load factor, natural frequency, mode shape and modal strain energy are evaluated using finite element package ANSYS 13.0. Study shows that debond affect the performance of the structure more severely than dent. Reduction in the fundamental frequencies due to the presence of dent or debond is not significant for the case considered. But the debond reduces the buckling load factor significantly. Dent of size 8-20% of core thickness shows 13% reduction in buckling load capacity of the sandwich column. But debond of the same size reduced the buckling load capacity by about 90%. This underscores the importance of detecting these damages in the initiation level itself to avoid catastrophic failures. Influence of the damages on fundamental frequencies, mode shape and modal strain energy are examined. Effectiveness of these parameters as a damage detection tool for sandwich structure is also assessed

FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.