Técnicas associadas à biotecnologia da reprodução para minimizar os efeitos do estresse térmico e aumentar a fertilidade em vacas leiteiras de alta produção

The dairy sector has undergone considerable economic losses due to low fertility rates due to adverse effects of heat stress on reproduction of cows. Genetic selection for increased production, coupled with the expanding dairy to tropical areas of the planet, and global warming has further aggravated the problem of heat stress. The effects of heat stress are multifactorial and act directly or indirectly at various levels of reproductive tissues, resulting in low fertility of cows, which in practice, results in reduced reproductive efficiency in the property, reducing the producers’ profit. Some strategies related to breeding biotechnology such as fixed-time artificial insemination, embryo transfer and use of BST, can minimize these effects and improve the reproductive efficiency of the herd

Análise da percepção da variação do campo térmico na cidade de São Paulo-SP: o exemplo da subprefeitura Sé

This research aimed to analyze the spatial area for the design of the Heat Island of Subprefecture Sé, in São Paulo-SP, with the support of geotecnology and based on the study of environmental perception. We used remote sensing products such as maps ofland use and soil temperature and apparent surface to evaluate the thermal conditions considered critical points in the central area of the municipality. The methodology used was qualitative analysis, based on interviews with the people, allowing rescue geoecology the conditioning aspects of the city, with an emphasis on environmental perception. This study aimed toanalyze the perception of the variation of the thermal field in São Paulo. The results indicated that (95%) of respondents feel that the temperature of the central area has increased each year, and the district that stood out was the Sé, due to intense use and occupation of land and contribute one of the largest shopping centers. Districts with points given for having better thermal comfort were Santa Cecília, the República and Bela Vista, due to their larger amount of green areas by fiscal court, which act as local refrigerators. It was found that the respondents have the perception and awareness of their spa directly related to the quality of life. Through analysis of several variables involved, proposals and strategies may support public policies and urban planning

Análise do conforto térmico da cidade de Mirandópolis/SP em seus espaços abertos

Mirandópolis/SP appeared in 1934 from the railroad “the Brazil Northwest”, that there it served one of the points of its stretch that had as main function to drain the agricultural production northwestern native of São Paulo of that time. The installation of the town happened absent of concerns with initial urbanístico planning, thus modifying its natural landscape and modifying characteristic ambient without compensatory measures aiming at a future expansion of the urban mesh. Fact this that still causes today consequences the quality of life of the people and also the observed thermal comfort later. Ahead of this, the present work had for objective to identify through measurements of temperature and relative humidity of the city of Mirandópolis/SP the differences that in the fabric urban they corroborate for a comfort situation or thermal discomfort to the outdoors in accordance with the Diagram Bioclimático de Olgyay the collection of data was made throughout the month of July of 2011 involving the attainment of information of Temperature and relative humidity of air and questionnaire applied to the passer-bys in the act of the measurements. Also approaching the different thermal dynamic of the zones of housing in relation to the Urban Cannyon that develops the commerce as predominant activity. This research sample that, although a city to be small, the quality of life of its inhabitants is not only guaranteed by the transport or that its thermal comfort reveals inside homogeneous of the urban perimeter, but that it has yes heterogeneidade in the scope of the urban climate in these spaces

Direcionamento de peptídeos tolerogênicos da proteína de choque térmico 60 para células dendríticas utilizando anticorpos anti-DEC-205

A indução de tolerância imunológica em situações altamente desejadas como no transplante e em doenças autoimunes permanece um grande desafio para pesquisa científica de tradução. Nesse contexto, o estudo das proteínas do choque térmico (HSPs) e seus peptídeos vêm trazendo informações relevantes sobre o controle da reposta imune. Dados da literatura mostram que alguns de seus peptídeos apresentam propriedades imunorreguladoras, como os peptídeos N3 e N7 da HSP60. Além disso, tem se mostrado que a apresentação de antígenos em contextos específicos por células dendríticas (DCs) pode favorecer o estabelecimento da tolerância imunológica. Dessa forma, o direcionamento dos peptídeos tolerogênicos da HSP60, N3 e N7, in vivo, para DCs, com o intuito de essas células apresentarem esses peptídeos em um contexto imunorregulador, pode induzir um estado de tolerância. Assim, nesse trabalho, tivemos como objetivo a produção de anticorpos (Acs) contra o receptor DEC-205 de DCs conjugados com os peptídeos N3 e N7 da HSP60. Esses Acs, ao se ligarem ao DEC-205 nas DCs, podem ser fagocitados, processados e por fim apresentados a células T em um contexto imunorregulador. Para tal, foram realizadas transfecções de células HEK-293T e CHO com plasmídeos codificando as cadeias leve e pesada dos respectivos Acs a fim de se obter essas proteínas recombinantes. Podemos observar que as células HEK apresentaram uma produção mais eficiente dos Acs quando comparadas com as células CHO (120 vs 30 ng/ml, respectivamente), apesar disso a produção dos Acs ficou abaixo do esperado impossibilitando a realização ensaios in vivo. Além disso, realizamos um ensaio de ligação do Ac anti-DEC-N7 a superfície de DCs e observamos que os Acs produzidos apresentam capacidade de se ligarem a superfície dessas células. Concluímos que os anticorpos recombinantes anti-DEC-205 são capazes... (Resumo completo, clicar acesso eletrônico abaixo)

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Análise teórica e experimental de uma ventaneira de alto forno, visando seu comportamento térmico e fluidodinâmico

In this work, it was studied the thermal and fluid dynamic behavior from theorical and experimental point of view of a blast furnace tuyere. The tuyere is responsible for the hot air insuflation into the blast furnace. The parameter used in the comparison was the difference between the cooling water inlet and outlet temperatures. There were used forced convection correlations inside circular sections with adequations for non circular sections. Based on operations dates of flux and thermal loads it was possible to model numerically the tuyere, and, since it was obtained the wall temperatures, estimate the conduction and convection resistances and the heat flux through the walls in contact with the water. The total heat fluxes from wall to water were applied to the energy conservation equation where could be estimated the theorical temperature variation. Compared to the real value, the theorical value presented a difference of 0,2 °C. Considering that the boundary conditions around the tuyere are transitories and that your channels have some rugosity irregularities we can consider the estimation method for cooling system coherent with the real operational parameters

Estudo de causas de falhas em selos mecânicos de bombas centrífugas para circulação de óleo térmico

This study is about a heating line that uses thermal oil. It is located in a facility that produces interlayers used in cars windshields. A plastic resin is melted and is sent to a matrix called DIE where the interlayers are produced. The DIE needs to receive heat from the circulation of thermal oil in four different regions of its interior, to ensure the correct thickness of the interlayer. The thermal energy is provided by electric heaters and the flow of thermal oil is impelled by four mechanically sealed centrifugal pumps (one per region). The key point of this study is the fact that these four pumps of the system have reported successive failures in the mechanical seals. Apparently, a poorly designed project has burdened the system intermittently. The pumps operation condition is located in a region of low efficiency, according to the characteristic curves. This fact is the source of the noticeable reduced time between failures. Changes in the configuration of the facility and in the number of pumps will be proposed, aiming to achieve higher operational efficiency. The proposals will be mathematically analyzed according to the Hydraulic Institute criteria. At the same time, we will also keep focus on an in-depth study of a heating system structure, starting with a detailed approach for each component and discussion about its real need and economic viability. At the end of this paper it is shown that the gain in efficiency achieved with the new proposed configuration reflects not only in the reduction of maintenance costs, but also a potential improvement in energy efficiency. It is shown that these two aspects are closely related and together form the basis for the design of a reliable and efficient pumping system

Estudo sobre fornos de tratamento térmico e propostas de cogeração de energia em usina siderurgica não integrada

Steel industry is a sector heavily dependent on energy, both electrical and thermal. Since the receipt of raw materials to the shipment of finished products to customers, through mergers, casting, rolling, heat treatment, inspection, among others, high amounts of energy are demanded, generating very significant costs to the productive chain in its entirety . Therefore, any alternative that favors the reduction in energy consumption or barateie the cost of this is very welcome. Within this context, this paper aims to make a technical and economic analysis of installing a cogeneration plant in the field rolling in a non-integrated steel mill. Two configurations are proposed plants, with one being the use of heat from waste gases from furnaces existing in the area mentioned and another with the use of heat from waste gases from an internal combustion engine. Both proposals are evaluated technically and later is done the economic analysis, calculating the financial return (pay back) in relation to the investment required, operation and maintenance of the plant

Avaliação da influência da taxa de resfriamento posterior ao tratamento térmico nas propriedades mecânicas do aço API 5L X70

In this work a study about the mechanical properties of the API 5L X70 steel, with or without heat treating, has been made, with the intetion of assess the influence of cooling after the austenitization heat treating by air cooling (normalizing) and a rapid cooling with oil (tempering). This steel is known by high strength and ductility values and it is commonly used in the manufacture of oil pipes. The growing energy demand encouraged the study and manufacture of this material. Although this microalloyed dispense subsequent heat treatings, it was proven that its implementation is very advantageous for this type of application, improving hardness and plastic stability. It was also assessed that the faster the cooling rate is, the better will be these properties

Estudo do comportamento térmico e reológico de amidos na conformação cerâmica de compostos multicamada com alumina, titanato de alumínio e dióxido de titânio

The project aims to develop ceramic compounds with gradients of the mechanical properties, using the molding technique with commercial starches. To understand the process of interaction between starch and ceramic powders, the proposed methodology involves viscometry tests (up to 200 °C). Viscometric assays were carried out with slurries of alumina, titania and aluminum titanate with potato starch, cassava and corn. The specimens were tested for dilatometry, thermomechanical, thermal shock, mechanical and characterization by SEM. The ceramic powders and starches were analyzed using the optical microscope to measure the size of these. It was made of th kinetics of starch gelatinization and titania with the cornstarch in theoptical microscope to observe how the grains of starch behaved in welling

Estudo de caso do conforto térmico de dois modelos construtivos em madeira: wood frame e log home

O presente trabalho consiste em demonstrar valores referentes ao conforto ambiental de dois modelos construtivos, sendo o primeiro um edifício já executado e o outro em fase de implantação, ambos no Campus Experimental de Itapeva, aplicando alguns conceitos em habitação mais sustentáveis de madeira na região de Itapeva, estado de São Paulo, Brasil. A edificação construída sedia duas salas de aula a partir da tipologia construtiva wood frame, constituída basicamente de paredes autoportantes compostas de ossatura de madeira tratada de pinus.sp, chapas estruturais em OSB, manta de isolamento térmico/acústico e fechamento interno e externo, respectivamente em gesso e sidding (lambris de madeira). A habitação em fase de início de implantação foi idealizada a partir da tipologia construtiva log-home, e atenderá a necessidade de espaço físico para abrigar o Centro Acadêmico e a empresa-júnior “PROMAD”, ambos do curso de Engenharia Industrial Madeireira do Campus Experimental da UNESP/Itapeva. Esta construção foi elaborada a partir de técnicas de baixo impacto ambiental, levando em consideração os resultados de análise térmica obtidos na edificação anterior. Em ambos modelos construtivos foram empregados recursos renováveis abundantes na região, como a madeira de reflorestamento de Pinus e de Eucalipto. Foi acrescentado ainda ao segundo modelo a utilização de resíduos industriais lignocelulósicos, como rolete de laminação e outros materiais locais disponíveis. A metodologia básica empregada para a obtenção de dados sobre o conforto térmico em relação as edificações foi, para o primeiro caso, a coleta de dados de temperatura e umidade utilizando um termo-higrômetro, a sistematização e análise de dados reais obtidos no interior da edificação. No segundo caso, o dimensionamento do conforto térmico... (Resumo completo, clicar acesso eletrônico abaixo)

Síntese, caracterização e estudo do comportamento térmico dos oxanatos de lantanídeos(III) e de ítrio(III), no estado sólido

Pós-graduação em Química - IQ

Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar

Pós-graduação em Engenharia Mecânica - FEG

Uso de microarray para determinação da expressão gênica diferencial em oócitos Bos Taurus Indicus e Bos Taurus Taurus submetidos ao estresse térmico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Validação de métodos nociceptivos elétrico, mecânico e térmico para avaliação de dor de equinos tratados com metadona associada à detomidinaou acepromazina

Pós-graduação em Anestesiologia - FMB