Morphometric Analysis of the Extensor Tendons of the Hallux and Potential Implications for Tendon Grafting

Although several tendon sources are available for reconstructive surgical procedures, all have one or more shortcomings. The aim of this work was to evaluate if the extensor tendons of the hallux showed anatomical characteristics that could make them an additional source for tendon grafting procedures.The authors performed a detailed morphometric analysis of the extensor tendons of the hallux in 26 lower limbs in order to evaluate the putative association of anatomical variants with hallux valgus, and to attempt to assess the feasibility of using part of the extensor apparatus of the hallux as a source of tendon for grafting procedures.An accessory extensor hallucis longus ten-don was found in 92.3% of cases. The extensor hallucis brevis tendon length was 10.5 ± 0.6 cm; its width was 0.5 ± 0.1 cm, and its thickness varied between 1-2 mm, making it a potentially good candidate as a source of ten-don grafts. Several anatomical variations were observed, namely the fusion of the tendons of the extensor hallucis brevis and the accessory extensor hallucis longus muscles in the distal part of the foot.This new therapeutic option, if implemented, would possibly increase the supply of autogenous donor tissue for reconstructive procedures, thereby enhancing the reconstructive surgeon’s armamentarium.

Incorporação de resíduos de cerâmica em argamassas de cal aérea

Sabe-se que aproximadamente 30% do material produzido pela indústria cerâmica é considerado desperdício e, frequentemente, depositado em aterro, com o impacto ambiental negativo que acarreta. Esta tem sido uma das grandes motivações para a crescente investigação que tem sido levada a cabo a fim de obter soluções viáveis para a sua reintrodução no processo produtivo. A viabilidade do uso de resíduos de material cerâmico tem vindo a ser avaliada, principalmente, na incorporação em betões ou em argamassas com base em cimento. Na antiguidade e na ausência de pozolanas naturais, eram frequentemente utilizados resíduos cerâmicos moídos, atuando como pozolanas artificiais e conferindo algumas características hidráulicas e de durabilidade às argamassas de cal aérea. Temse efetivamente constatado que alguns pós resultantes de desperdícios de cerâmica de barro vermelho, nomeadamente os que foram sujeitos a tratamento térmico a temperaturas inferiores a 900°C e moídos em granulometria fina, podem funcionar como pozolanas artificiais em argamassas. A introdução de resíduos de cerâmica em granulometria mais grossa nas argamassas, como agregado, pode também revelarse vantajoso, na medida em que permite substituir parcialmente a areia normalmente utilizada. Assim sendo, o recurso aos resíduos de cerâmica pode ser muito vantajoso em três vertentes principais: a redução de resíduos a depositar em aterro, a redução da extração de rochas para serem utilizadas na produção de ligantes e de areias e a produção de argamassas com comportamentos melhorados. Com o objetivo de analisar a viabilidade da introdução de resíduos de cerâmica em argamassas, que se pretendem sejam, essencialmente, adequadas como argamassas de substituição, tem vindo a ser desenvolvida investigação na Universidade de Coimbra em colaboração com a Universidade Nova de Lisboa. O trabalho que se apresenta neste artigo é uma pequena parte dessa investigação. Toda esta investigação tem tido o apoio de um projeto de investigação financiado pela FCT.

Context-based identification of energy consumption in industrial plants

Nowadays, reducing energy consumption is one of the highest priorities and biggest challenges faced worldwide and in particular in the industrial sector. Given the increasing trend of consumption and the current economical crisis, identifying cost reductions on the most energy-intensive sectors has become one of the main concerns among companies and researchers. Particularly in industrial environments, energy consumption is affected by several factors, namely production factors(e.g. equipments), human (e.g. operators experience), environmental (e.g. temperature), among others, which influence the way of how energy is used across the plant. Therefore, several approaches for identifying consumption causes have been suggested and discussed. However, the existing methods only provide guidelines for energy consumption and have shown difficulties in explaining certain energy consumption patterns due to the lack of structure to incorporate context influence, hence are not able to track down the causes of consumption to a process level, where optimization measures can actually take place. This dissertation proposes a new approach to tackle this issue, by on-line estimation of context-based energy consumption models, which are able to map operating context to consumption patterns. Context identification is performed by regression tree algorithms. Energy consumption estimation is achieved by means of a multi-model architecture using multiple RLS algorithms, locally estimated for each operating context. Lastly, the proposed approach is applied to a real cement plant grinding circuit. Experimental results prove the viability of the overall system, regarding both automatic context identification and energy consumption estimation.

Efeito da porosidade nas propriedades físicas, mecânicas e tribológicas de mós abrasivas

Dissertação de mestrado integrado em Engenharia de Materiais

Análise e simulação da produção de moldes para injeção de plásticos

Dissertação de mestrado em Engenharia Industrial

Coronary bilateral ostial enlargement using the saphenous vein in a patient with syphilitic aortitis

A patient with tertiary syphilis presenting with bilateral coronary ostial lesions and aortic regurgitation underwent surgical reconstruction of the coronary ostia by the anterior approach with autogenous saphenous vein grafting and substitution of the aortic valve with a bovine bioprosthesis. The procedure was easily performed and had good outcomes both early and late. The rarity of the association of a lesion in both coronary ostia with aortic regurgitation in syphilis and the surgical technique employed are discussed.

Dispersión agrícola y cambio social en las Sierras de Córdoba (ca. 1000 a C.- 1600 d C.) Agricultural spread and social change in Córdoba Hills (ca. 1000 b C- 1600 a D.)

El proceso cultural en las Sierras de Córdoba fue habitualmente concebido como marginal con respecto al Noroeste Argentino. Tras el establecimiento del esquema básico de la secuencia prehispánica, a mediados del siglo pasado, se definió una etapa agroalfarera de cronología tardía, que continuaba a una extensa etapa precerámica cuyos límites se aproximaban a la transición Pleistoceno-Holoceno. Se hacía referencia, de este modo, al advenimiento de un modo de vida agrícola y aldeano, que reemplazaba a otro basado en la caza y recolección. Dicha transformación, alternativamente atribuida a la población cazadora local o a una migración de grupos agricultores desde regiones vecinas, se habría consumado hacia 1500 AP, fijando uno de los límites de la dispersión de la agricultura andina. Es necesario destacar la extremada escasez y el carácter indirecto de las evidencias arqueológicas utilizadas para sustentar la ocurrencia de tal proceso. Asimismo, la vigencia de supuestos que han comenzado a mostrar inconsistencias con los resultados de las recientes investigaciones. Entre ellos, principalmente, el que asume que la introducción de la agricultura dio paso a una transformación radical de las sociedades prehispánicas, constituyendo un hito fundamental en su devenir histórico, el comienzo de una nueva etapa. Nuestros últimos estudios en el sector central de las Sierras de Córdoba apuntaron, entre otros objetivos, a reconocer indicadores arqueológicos directos de producción agrícola, así como de la manipulación y consumo de plantas cultivadas. Los primeros resultados nos permiten vislumbrar un escenario complejo que desafía los modelos vigentes. El consumo de maíz, por ejemplo, parece haber antecedido por muchos siglos a la adopción de prácticas agrícolas. El acceso a este cultígeno, sumado a otros elementos, indicaría cambios entre los cazadores-recolectores serranos, promovidos por su integración en redes macrorregionales que los vincularon con sociedades agricultoras de la vertiente oriental andina y quizás del Chaco Santiagueño, por lo menos desde 2500 AP. En definitiva, la agricultura no parece haber sido adoptada rápidamente ni provocado transformaciones profundas e inmediatas en la organización de los grupos prehispánicos. Se ha observado, por el contrario, la incorporación gradual de distintas innovaciones que incluso permiten relacionar la manipulación y más tarde el cultivo de plantas domesticadas, con procesos de intensificación productiva de mayor escala temporal. Uno de nuestros objetivos en este proyecto consiste, básicamente, en profundizar las investigaciones en curso a fin de ampliar el cuerpo de datos con el cual analizar y discutir el problema de la dispersión agrícola en la región. Ello implica el tratamiento de diferentes líneas de evidencia, en particular: 1) la distribución regional de sitios arqueológicos y las modalidades de ocupación de las tierras cultivables; 2) la búsqueda de superficies de cultivo en sitios estratificados; y 3) estudios arqueobotánicos, polínicos y de isótopos estables. Se entiende que no le corresponde a la arqueología asumir apriorísticamente el significado histórico de la introducción de la agricultura, sino establecerlo en cada caso puntual a través de la investigación concreta. Nuestro segundo objetivo consiste, por lo tanto, en delinear los cambios (económicos, tecnológicos, políticos, sociales) que acompañaron al proceso de dispersión agrícola. Ello implica el tratamiento de diferentes problemas, entre otros: 1) las prácticas de apropiación de los recursos silvestres; 2) la continuidad y cambio tecnológico; 3) la movilidad y la articulación microambiental; y 4) los aspectos políticos y sociales ligados a prácticas como la molienda grupal y la producción del arte rupestre. The radical chage of societies from hunter-gatherers to farmers in 1500 BP was considered a milestone whitin the cultural process of pre-hispanic societies in Cordoba Hill. But there is a shortage of archaeological remains to support this change and there are weak hypotheses of absolute transformations. During the last years, our studies carried out on the central area of Cordoba Hill have tried to recognize direct archaeological signs of agriculture production as well as the handling and consumption of crops. The first results show a complex set that challenges the current theoretical models. For example, the corn was probably eatten prior to its adoption for farm practices. Our first main consists in increasing a corpus of data about the spread of agriculture in Cordoba region that we have been researching for the last years. These researches involve different lines of evidence: 1-regional location of archaeological sites and kinds of occupation on cultivable lands; 2-the search for plots at archaeological sites; 3-archaeobotanical, pollen and stable isotopes studies. Our second main consists in outlining changes within the spread of agriculture. It implies to considering different problems: 1-the practices to gatherer wild resources; 2-the continuity and changes of technologies; 3-the mobility and the articulation on the micro-environment; 4-political and social aspects in connection with activities such as groupal grinding and rock art productions.

Is intra-operative blood flow predictive for early failure of radiocephalic arteriovenous fistula?

BACKGROUND: For over 50 years, radiocephalic wrist arteriovenous fistulae (RCAVF) have been the primary and best vascular access for haemodialysis. Nevertheless, early failure due to thrombosis or non-maturation is a major complication resulting in their abandonment. This prospective study was designed to investigate the predictive value of intra-operative blood flow on early failure of primary RCAVF before the first effective dialysis. METHODS: We enrolled patients undergoing creation of primary RCAVF for haemodialysis based on the pre-operative ultrasound vascular mapping discussed in a multidisciplinary approach. Intra-operative blood flow measurement was systematically performed once the anastomosis had been completed using a transit-time ultrasonic flowmeter. During the follow-up, blood flow was estimated by colour flow ultrasound at various intervals. Any events related to the RCAVF were recorded. RESULTS: Autogenous RCAVFs (n = 58) in 58 patients were constructed and followed up for an average of 30 days. Thrombosis and non-maturation occurred in eight (14%) and four (7%) patients, respectively. The intra-operative blood flow in functioning RCAVFs was significantly higher compared to non-functioning RCAVFs (230 vs 98 mL/min; P = 0.007), as well as 1 week (753 vs 228 mL/min; P = 0.0008) and 4 weeks (915 vs 245 mL/min, P < 0.0001) later. Blood flow volume measurements with a cut-off value of 120 mL/min had a sensitivity of 67%, specificity of 75% and positive predictive value of 91%. CONCLUSIONS: Blood flow <120 mL has a good predictive value for early failure in RCAVF. During the procedure, this cut-off value may be used to select appropriately which RCAVF should be investigated in the operation theatre in order to correct in real time any abnormality.

Age Structure of Adult Mosquito (Diptera: Culicidae) Populations from Buenos Aires Province, Argentina

In order to detect seasonal trends in the age structure of adult mosquitoes from Buenos Aires province, Argentina, female populations were sampled with CDC traps during 1989-1991 in Punta Lara and La Plata. The mosquitoes were dissected and age-grouped according to ovarian tracheation and ovariolar stages. All Runchomyia paranensis females were parous, suggesting that this species could be autogenous. Aedes albifasciatus showed parous peaks following population peaks, with shorter delays in spring-summmer and longer in fall-winter. Ae. crinifer and Culex dolosus showed wide fluctuations in age structure due to adult emergences during all months. Psorophora ferox showed high population replacement rates. Mansonia indubitans and Ma. titillans have few generations per year during their activity period. This is the first report on age-grading of adults of field mosquito populations from Argentina

Diversity of sandflies (Psychodidae: Phlebotominae) captured in sandstone caves from Central Amazonia, Brazil

In the present paper we describe the diversity of phlebotomine sandflies collected in three sandstone caves in the municipality of Presidente Figueiredo, state of Amazonas, Brazil. The phlebotomines were captured during 2006 with CDC light traps. Guano samples from inside the Gruta Refúgio do Maruaga were collected to investigate the presence of immature specimens. A total of 2,160 adult phlebotomines representing 15 species were captured. Pintomyia pacae was the dominant species in Gruta dos Animais (1,723 specimens) and Gruta dos Lages (50 specimens) and Deanemyia maruaga new comb (280 specimens) was the dominant species in Gruta Refúgio do Maruaga. A total of 18 guano samples were collected and seven of these samples included immature specimens. A total of 507 immature specimens were captured; 495 of these specimens were larvae and 12 were pupae. The presence of paca (Agouti paca) footprints near Gruta dos Animais and Gruta dos Lages suggests the association of Pi. pacae with this rodent. This finding may explain the abundance of Pi. pacae in these locations, while the species is relatively rare in the forest. Deanemyia maruaga is a cave species that uses guano to breed during its immature stages. Adult specimens of this species are apparently parthenogenetic and autogenous and represent the second record of parthenogenesis for the subfamily Phlebotominae.

Sharing competences in strategic alliances: a case study of the Cosan and Shell biofuel venture

In a competitive world, the way a firm establishes its organizational arrangements may determine the enhancement of its core competences and the possibility of reaching new markets. Firms that find their skills to be applicable in just one type of market encounter constraints in expanding their markets, and through alliances may find a competitive form of value capture. Hybrid forms of organization appear primarily as an alternative to capturing value and managing joint assets when the market and hierarchy modes do not present any yields for the firm's competitiveness. As a result, this form may present other challenging issues, such as the allocation of rights and principal-agent problems. The biofuel market has presented a strong pattern of changes over the last 10 years. New intra-firm arrangements have appeared as a path to participate or survive among global competition. Given the need for capital to achieve better results, there has been a consistent movement of mergers and acquisitions in the Biofuel sector, especially since the 2008 financial crisis. In 2011 there were five major groups in Brazil with a grinding capacity of more than 15 million tons per year: Raízen (joint venture formed by Cosan and Shell), Louis Dreyfus, Tereos Petrobras, ETH, and Bunge. Major oil companies have implemented the strategy of diversification as a hedge against the rising cost of oil. Using the alliance of Cosan and Shell in the Brazilian biofuel market as a case study, this paper analyses the governance mode and challenging issues raised by strategic alliances when firms aim to reach new markets through the sharing of core competences with local firms. The article is based on documentary research and interviews with Cosan's Investor Relations staff, and examines the main questions involving hybrid forms through the lens of the Transaction Cost Economics (TCE), Agency Theory, Resource Based View (RBV), and dynamic capabilities theoretical approaches. One focal point is knowledge "appropriability" and the specific assets originated by the joint venture. Once the alliance is formed, it is expected that competences will be shared and new capabilities will expand the limits of the firm. In the case studied, Cosan and Shell shared a number of strategic assets related to their competences. Raízen was formed with economizing incentives, as well to continue marshalling internal resources to enhance the company's presence in the world energy sector. Therefore, some challenges might be related to the control and monitoring agents' behavior, considering the two-part organism formed by distinctive organizational culture, tacit knowledge, and long-term incentives. The case study analyzed illustrates the hybrid arrangement as a middle form for organizing the transaction: neither in the market nor in the hierarchy mode, but rather a more flexible commitment agreement with a strategic central authority. The corporate governance devices are also a challenge, since the alignment between the parent companies in the joint ventures is far more complex. These characteristics have led to an organism with bilateral dependence, offering favorable conditions for developing dynamic capabilities. However, these conditions might rely on the partners' long-term interest in the joint venture.

Caracterització radiològica i dosimètrica ambiental d'una planta de producció de fosfat bicàlcic

The production of dicalcium phosphate are included in the list of industries classified as NORM in Euratom 29/96. The aim of this study is to determine the con-centrations of specific flows and their variability over time of 226Ra, 210Pb and 210Po in the inputs and out-puts of the production process. Also classified areas of the plant and the workers according to the radio-logical risk and radiation protection measures have been proposed. The results show that the rock phos-phate has a high specific activity of the 226Rn, 210Po and 210Pb in secular equilibrium (1500-2000 Bq • kg-1) but the outputs of the process will distort the secu-lar equilibrium. The only shortfall is the flow balance of 226Ra, which accumulates in the process. The dis-tribution of the dose in the plant concentrates on the area of reactor tanks and slop pipes as regards exter-nal irradiation dose and the grinding zone, the area of packaging and loading area so respects dose inhaled. We propose a signaling areas, cleaning and replace-ment of old equipment in the facilities and radiological safety of the maintenance staff.

Field Experiments of Current Concrete Pavement Surface Characteristics Practices: Iowa Data Collection and Analysis, December 2005

One of the most important issues in portland cement concrete pavement research today is surface characteristics. The issue is one of balancing surface texture construction with the need for durability, skid resistance, and noise reduction. The National Concrete Pavement Technology Center at Iowa State University, in conjunction with the Federal Highway Administration, American Concrete Pavement Association, International Grinding and Grooving Association, Iowa Highway Research Board, and other states, have entered into a three-part National Surface Characteristics Program to resolve the balancing problem. As a portion of Part 2, this report documents the construction of 18 separate pavement surfaces for use in the first level of testing for the national project. It identifies the testing to be done and the limitations observed in the construction process. The results of the actual tests will be included in the subsequent national study reports.

Effects of Pavement Surface Texture on Noise and Frictional Characteristics HR-281, February 1987

An experimental modification of the transverse groove surface texture of a section of an urban interstate highway was performed by the Iowa Department of Transportation. Transverse groove texturing i s a design feature required by the Federal Highway Administration t o reduce skidding under wet pavement conditions. Adjacent residents claimed the texturing was the cause of especially annoying tonal characteristics within the traffic noise. A research proposal to modify the existing texture pattern by surface grinding and to study the noise and friction effects was approved for funding by the Iowa Highway Research Board. Results i n the form of a comparison between traffic noise before modification and traffic noise immediately after and 15 months after modification indicate that the change in surface texture has lowered overall traffic noise levels by reducing a high frequency component of the traffic noise spectrum. Fraffic testing data show reduced capacity of the roadway to inhibit wet pavement skidding as a result of the surface modification.

Analysis of bioavailable arsenic in rice with whole cell living bioreporter bacteria.

A multiwell plate bioassay was developed using genetically modified bacteria (bioreporter cells) to detect inorganic arsenic extracted from rice. The bacterial cells expressed luciferase upon exposure to arsenite, the activity of which was detected by measurement of cellular bioluminescence. The bioreporter cells detected arsenic in all rice varieties tested, with averages of 0.02-0.15 microg of arsenite equivalent per gram of dry weight and a method detection limit of 6 ng of arsenite per gram of dry rice. This amounted to between approximately 20 and 90% of the total As content reported by chemical methods for the same sample and suggested that a major proportion of arsenic in rice is in the inorganic form. Calibrations of the bioassay with pure inorganic and organic arsenic forms showed that the bacterial cells react to arsenite with highest affinity, followed by arsenate (with 25% response relative to an equivalent arsenite concentration) and trimethylarsine oxide (at 10% relative response). A method for biocompatible arsenic extraction was elaborated, which most optimally consisted of (i) grinding rice to powder, (ii) mixing with an aqueous solution containing pancreatic enzymes, (iii) mechanical shearing, (iv) extraction in mild acid conditions and moderate heat, and (v) centrifugation and pH neutralization. Detection of mainly inorganic arsenic by the bacterial cells may have important advantages for toxicity assessment of rice consumption and would form a good complement to total chemical arsenic determination.