The Science and Art of Light

Architecture today often is praised for its tectonics, floating volumes, and sensational, gravity-defying stunts of “starchitecture.” Yet, very so often there is a building that inspires descriptions of the sublime, the experiential, and the power of light and architecture to transcend our expectations. The new Meinel Optical Sciences Research Building, designed by Phoenix-based Richärd+Bauer for the University of Arizona, Tucson, is one of these architectural rarities. Already drawing comparisons to Louis Kahn's 1965 Salk Institute for Biological Studies in La Jolla, California, the indescribable quality of light that characterizes the best of Kahn's work also resonates in Richärd+Bauer's new building. Both an expansion and renovation of the existing College of Optical Sciences facilities, the Meinel building includes teaching and research laboratories, six floors of offices, discussion areas, conference rooms, and an auditorium. The new 47,000 square-foot cast-in-place concrete structure, wrapped on three-sides in copper-alloy panels, harmonizes with the largely brick vocabulary of the campus while reflecting the ethereal quality of the wide Arizona sky. The façade, however, is merely a prelude for what awaits inside—where light and architecture seamlessly combine to create moments of pure awe.

Highlight: Yale University Art Gallery

Modern architecture, with its exposed concrete, glass, and steel expanses, does not age gracefully. The Yale University Art Gallery, designed by architecture great Louis Kahn, is no exception. As Yale's first modernist building, completed in 1953, and Kahn's first major commission and collaboration with pioneering lighting designer, Richard Kelly, the gallery is an important part of American architecture. Yet, despite its iconic status, the building suffered numerous architectural indignities in the years following its completion, including the insertion of permanent gallery partitions, which divided Kahn's open plan, and the enclosure of an exterior court, which blocked daylight to the lower galleries.

Reengaging, reenacting and reenvisaging discourses of disaster through public space performance: Austerity, art, and the art of protest

This paper offers a mediation on disaster, recovery, resilience, and restoration of balance, in both a material and a metaphorical sense, when ‘disaster’ befalls not the body politic of the nation but the body personal. In the past few decades, of course, artists, activists and scholars have deliberately tried to avoid describing personal, physical and phenomenological experiences of the disabled body in terms of difficulty and disaster. This has been part of a political move, from a medical model, in which disability, disease and illness are positioned as personal catastrophes, to a social model, in which disability is positioned as a social construct that comes from systems, institutions and infrastructure designed to exclude different bodies. It is a move that is responsible for a certain discomfort people with disabilities, and artists with disabilities, today feel towards performances that deploy disability as a metaphor for disaster, from Hijikata, to Theatre Hora. In the past five years, though, this particular discourse has begun rising again, particularly as people with disabilities fact their own anything but natural disasters as a result of the austerity measures now widespread across the US, UK, Europe and elsewhere. Measures that threaten people’s ability to live, and take part in social and institutional life, in any meaningful way. Measures that, as artist Katherine Araniello notes, also bring additional difficulty, danger, and potential for disaster as they ripple outwards across the tides of familial ties, threatening family, friends, and careers who become bound up in the struggle to do more with less. In this paper, I consider how people with disabilities use performance, particularly public space interventionalist performance, to reengage, renact and reenvisage the discourse of national, economic, environmental or other forms of disaster, the need for austerity, the need to avoid providing people with support for desires and interests as well as basic daily needs, particularly when fraud and corruption is so right, and other such ideas that have become an all too unpleasant reality for many people. Performances, for instance, like Liz Crow’s Bedding Out, where she invited people into her bed – for people with disabilities a symbolic space, which necessarily becomes more a public living room restaurant, office and so forth than a private space when poor mobility means they spend much time it in – to talk about their lives, their difficulties, and dealing with austerity. Or, for instance, like the Bolshy Divas, who mimic public and political policy, reports and advertising paranoia to undermine their discourses about austerity. I examine the effects, politics and ethics of such interventions, including examination of the comparative effect of highly bodied interventions (like Crow’s) and highly disembodied interventions (like the Bolshy Diva’s) in discourses of difficulty, disaster and austerity on a range of target spectator communities.

Privacy architectures in social networks’ state-of-the-art survey

The use of social networking has exploded, with millions of people using various web- and mobile-based services around the world. This increase in social networking use has led to user anxiety related to privacy and the unauthorised exposure of personal information. Large-scale sharing in virtual spaces means that researchers, designers and developers now need to re-consider the issues and challenges of maintaining privacy when using social networking services. This paper provides a comprehensive survey of the current state-of-the-art privacy in social networks for both desktop and mobile uses and devices from various architectural vantage points. The survey will assist researchers and analysts in academia and industry to move towards mitigating many of the privacy issues in social networks.

Optimal configurations of active fiber composites based on asymptotic torsional analysis - art. no. 641413

Active Fiber Composites (AFC) possess desirable characteristics over a wide range of smart structure applications, such as vibration, shape and flow control as well as structural health monitoring. This type of material, capable of collocated actuation and sensing, call be used in smart structures with self-sensing circuits. This paper proposes four novel applications of AFC structures undergoing torsion: sensors and actuators shaped as strips and tubes; and concludes with a preliminary failure analysis. To enable this, a powerful mathematical technique, the Variational Asymptotic Method (VAM) was used to perform cross-sectional analyses of thin generally anisotropic AFC beams. The resulting closed form expressions have been utilized in the applications presented herein.

The Art of Adaptation : A study on the Europeanization of Finland's foreign and security policy

This study examines how Finnish foreign and security policy has been influenced by the European Union and its Common Foreign and Security Policy. It points to a growing interplay and misfit between the external expectations originating from the European level and the domestic expectations and traditional ways-of-doing-things. It is concluded that the deepening European integration in the sphere of foreign, security and defence policy has played a significant role in a number of transformations in the Finnish policies since 1995. New, more European, meanings have been attached to the key concepts of Finnish foreign and security policy. Neutrality and traditional peacekeeping have been replaced by a minimalist reading of military non-alignment and participation in crisis management operations and EU battle groups. Traditional small state identity has been recast more and more as small member stateness . At the same time Finland has entered an era of post-consensus in national foreign and security policy. A key theoretical argument in the background of the study is that collective understandings attached to European policies, when not resonating well with domestic understandings, cause adaptation pressures on domestic-level processes and may lead to changes in the way interests and identities are constructed. This means that Europeanization is principally seen as identity reconstruction. Consequently, the theoretical framework of the study builds on the Europeanization research literature and constructivist IR theory on state identity. Foreign and security policy is defined as the practice in which state identity is reproduced, and the key foreign and security policy concepts are seen as the vehicles of identity production. It is concluded that for Finland, participation in the EU s foreign, security and defence policies represents not only a tool for responding to the changes in the international security environment but also a new means of self-identification. Concerning the Finnish attempts of projecting national interests on the European security policy agenda, it is concluded that they mainly relate to the compatibility of the potential development of EU s defence dimension with the Finnish military non-alignment. Although neutrality was cast aside in the official security policy when Finland joined the EU, the analysis shows that its impact has continued in the domestic political debate and in the mind-set of the decision-makers. The primary research material includes official Finnish foreign and security policy documentation and the related parliamentary debates from 1994 to 2007. This study serves also as a comprehensive empirical overview on Finland s reactions and contributions to the EU Common Foreign and Security Policy.

Holographic optical elements: State-of-the-art review: Part 2

This is the second part of a two part review on the state-of-the-art in holographic optical elements (HOEs). The aspects of fabrication, evaluation, and applications of HOEs, are discussed in this part. It details the direction of future efforts towards finding work-horse type recording media, developing new methods for the evaluation of HOE, and identifying the areas of application where HOEs are to be considered as indispensable components/tools. Finally a summary of all the suggestions for future work made in the two parts is displayed in Table 2 of this part of the review.

Holographic optical elements — State-of-the-art review:Part I

A state-of-the-art review on holographic optical elements (HOE) is presented in two parts. In Part I a conceptual overview and an assessment of the current status on the design of HOE have been included. It is pointed out that HOE development based on the use of squeezed light, speckle, non-linear recording, comparative studies between optics and communication approaches, are some of the promising directions for future research in this vital area of photonics.

Systematic bias in MODIS dust aerosol retrieval at Kanpur (AERONET), Indo-Gangetic Basin - art.no.640816

We have compared the spectral aerosol optical depth (AOD) and aerosol fine mode fraction (AFMF) derived from Moderate Resolution Imaging Spectroradiometer (MODIS) with those of Aerosol Robotic Network (AERONET) at Kanpur (26.45N, 80.35E), northern India for the pre-monsoon season (March to June, 2001-2005). We found that MODIS systematically overestimates AOD during pre-monsoon season (known to be influenced by dust transport from north-west of India). The errors in AOD were correlated with the MODIS top-of-atmosphere apparent surface reflectance in 2.1 mu m channel (rho*(2.1)). MODIS aerosol algorithm uses p*(2.1) to derive the surface reflectance in visible channels (rho(0.47), rho(0.66)) using an empirical mid IR-visible correlation (rho(0.47) = rho(2.1)/4, rho(0.66) = rho(2.1)/2). The large uncertainty in estimating surface reflectance in visible channels (Delta rho(0.66)+/- 0.04, Delta rho(0.47)+/- 0.02) at higher values of p*(2.1) (p*(2.1) > 0.18) leads to higher aerosol contribution in the total reflected radiance at top-of atmosphere to compensate for the reduced surface reflectance in visible channels and thus leads to overestimation of AOD. This was also reflected in the very low values of AFMF during pre-monsoon whose accuracy depends on the aerosol path radiance in 0.47 and 0.66 mu m channels and aerosol models. The errors in AOD were also high in the scattering angle range 110 degrees-140 degrees, where the effect of dust non-spherity on its optical properties is significant. The direct measurements of spectral surface reflectance are required over the Indo-Gangetic basin in order to validate the mid IR-visible relationship. MODIS aerosol models should also be modified to incorporate the effect of non-spherity of dust aerosols.

Real-time image denoising algorithm in teleradiology systems - art.no.606304

Denoising of medical images in wavelet domain has potential application in transmission technologies such as teleradiology. This technique becomes all the more attractive when we consider the progressive transmission in a teleradiology system. The transmitted images are corrupted mainly due to noisy channels. In this paper, we present a new real time image denoising scheme based on limited restoration of bit-planes of wavelet coefficients. The proposed scheme exploits the fundamental property of wavelet transform - its ability to analyze the image at different resolution levels and the edge information associated with each sub-band. The desired bit-rate control is achieved by applying the restoration on a limited number of bit-planes subject to the optimal smoothing. The proposed method adapts itself to the preference of the medical expert; a single parameter can be used to balance the preservation of (expert-dependent) relevant details against the degree of noise reduction. The proposed scheme relies on the fact that noise commonly manifests itself as a fine-grained structure in image and wavelet transform allows the restoration strategy to adapt itself according to directional features of edges. The proposed approach shows promising results when compared with unrestored case, in context of error reduction. It also has capability to adapt to situations where noise level in the image varies and with the changing requirements of medical-experts. The applicability of the proposed approach has implications in restoration of medical images in teleradiology systems. The proposed scheme is computationally efficient.

Novel composite coded pattern for small angle measurement using imaging method -art.no.62891D

A novel approach for measurement of small rotation angles using imaging method is proposed and demonstrated. A plane mirror placed on a precision rotating table is used for imaging the newly designed composite coded pattern. The imaged patterns are captured with the help of a CCD camera. The angular rotation of the plane mirror is determined from a pair of the images of the pattern, captured once before and once after affecting the tilt of the mirror. Both simulation and experimental results suggest that the proposed approach not only retains the advantages of the original imaging method but also contributes significantly to the enhancement of its measuring range (+/- 4.13 degrees with accuracy of the order of 1 arcsec).

Elastic property estimation using Ultrasound Assisted Optical Elastography through Remote Palpation - A simulation study - art. no. 61640Q

We propose an effective elastography technique in which an acoustic radiation force is used for remote palpation to generate localized tissue displacements, which are directly correlated to localized variations of tissue stiffness and are measured using a light probe in the same direction of ultrasound propagation. The experimental geometry has provision to input light beam along the ultrasound propagation direction, and hence it can be prealigned to ensure proper interception of the focal region by the light beam. Tissue-mimicking phantoms with homogeneous and isotropic mechanical properties of normal and malignant breast tissue are considered for the study. Each phantom is insonified by a focusing ultrasound transducer (1 MHz). The focal volume of the transducer and the ultrasound radiation force in the region are estimated through solving acoustic wave propagation through medium assuming average acoustic properties. The forward elastography problem is solved for the region of insonification assuming the Lame's parameters and Poisson's ratio, under Dirichlet boundary conditions which gives a distribution of displacement vectors. The direction of displacement, though presented spatial variation, is predominantly towards the ultrasound propagation direction. Using Monte Carlo (MC) simulation we have traced the photons through the phantom and collected the photons arriving at the detector on the boundary of the object in the direction of ultrasound. The intensity correlations are then computed from detected photons. The intensity correlation function computed through MC simulation showed a modulation whose strength is found to be proportional to the amplitude of displacement and inversely related to the storage (elastic) modulus. It is observed that when the storage modulus in the focal region is increased the computed displacement magnitude, as indicated by the depth of modulation in the intensity autocorrelation, decreased and the trend is approximately exponential.

Computationally efficient optical tomographic reconstructions through waveletizing the normalized quadratic perturbation equation - art. no.61640R

In this paper, we present a wavelet - based approach to solve the non-linear perturbation equation encountered in optical tomography. A particularly suitable data gathering geometry is used to gather a data set consisting of differential changes in intensity owing to the presence of the inhomogeneous regions. With this scheme, the unknown image, the data, as well as the weight matrix are all represented by wavelet expansions, thus yielding the representation of the original non - linear perturbation equation in the wavelet domain. The advantage in use of the non-linear perturbation equation is that there is no need to recompute the derivatives during the entire reconstruction process. Once the derivatives are computed, they are transformed into the wavelet domain. The purpose of going to the wavelet domain, is that, it has an inherent localization and de-noising property. The use of approximation coefficients, without the detail coefficients, is ideally suited for diffuse optical tomographic reconstructions, as the diffusion equation removes most of the high frequency information and the reconstruction appears low-pass filtered. We demonstrate through numerical simulations, that through solving merely the approximation coefficients one can reconstruct an image which has the same information content as the reconstruction from a non-waveletized procedure. In addition we demonstrate a better noise tolerance and much reduced computation time for reconstructions from this approach.

Elimination of cross-talk in diffuse optical tomographic reconstructions through a weighted update procedure: results of simulation study - art. no. 61640S

Reconstructions in optical tomography involve obtaining the images of absorption and reduced scattering coefficients. The integrated intensity data has greater sensitivity to absorption coefficient variations than scattering coefficient. However, the sensitivity of intensity data to scattering coefficient is not zero. We considered an object with two inhomogeneities (one in absorption and the other in scattering coefficient). The standard iterative reconstruction techniques produced results, which were plagued by cross talk, i.e., the absorption coefficient reconstruction has a false positive corresponding to the location of scattering inhomogeneity, and vice-versa. We present a method to remove cross talk in the reconstruction, by generating a weight matrix and weighting the update vector during the iteration. The weight matrix is created by the following method: we first perform a simple backprojection of the difference between the experimental and corresponding homogeneous intensity data. The built up image has greater weightage towards absorption inhomogeneity than the scattering inhomogeneity and its appropriate inverse is weighted towards the scattering inhomogeneity. These two weight matrices are used as multiplication factors in the update vectors, normalized backprojected image of difference intensity for absorption inhomogeneity and the inverse of the above for the scattering inhomogeneity, during the image reconstruction procedure. We demonstrate through numerical simulations, that cross-talk is fully eliminated through this modified reconstruction procedure.