A cunha do ciclo de fácies do Grupo Guatá (Eopermiano) na margem sub-aflorante do norte paranaense

A wedge facies cycle it‟s a body of sedimentary rock, bounded above and below by unconformity and which represents a transgressive-regressive cycle of deposition. This cycle is formed by the following succession of facies: non-marine (N), transitional-coarse texture, and marine-fine texture; The objective of this study have been members of the sandstones and Triumph Siderópolis, seconded by rare calcareous sandstones and very thin limb Paraguaçu. Through analysis of facies in wells testified by CPRM, it was possible to group on facies successions and set the standard stacking. The Triunfo Member consists of three cycles of facies, lithology whose standard indicates a vertical arrangement ''type'' tuning up, other words, a component sandy bottom in the form of '' box'', followed by components sandy-clayey and clayey-carbonaceous (1st and 2nd cycle) and / or shale and limestone (3rd cycle), represented by the base member Paraguaçu. The first cycle only occurs on NF-5 wells and NF-6 in the form of Onlap channel dug in post-Itararé group. The cycle II also reaches wells NF-4 and NF-3 to the north, while the cycle III reaches the southern area, well NF-9. The member Paraguaçu, well PP-25 is predominantly clay-síltico, also stand out limestones and sandstones. The limestones are not coastal marine organisms probably connected with the algae and cyanobacteria, the sandstones are fine-textured, very thin and coastal deposition environment. The member Siderópolis, well NF-2 consists of a sandstone fluvial-estuarine deployed in the valley section, and succeeded by sandstones and siltstones bioturbed, they have linked the transgression of the Fm. Palermo

Litofácies e relações estratigráficas da formação Aquidauana no nordeste da Bacia do Paraná - São Sebastião do Paraíso (MG)

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Grande (BA)

The Urucuia Aquifer System represents a strategic water source in western Bahia. Its baseflow is responsible for the flow rate of the main tributaries of São Francisco river left bank in the dry season, including the Rio Grande, its main tributary in Bahia state. This river has a hydrological regime heavily affected by groundwater and is located in a region with conflicts about water resources. The aquifers geology is constituted by neocretacious sandstones of Urucuia Group subdivided in Posse Formation and Serra das Araras Formation. The embasement is formed by neoproterozoic rocks of Bambuí Group. This work focuses on an important tool application, the mathematical model, whose function is represent approximately and suitably the reality so that can assist in different scenarios simulations and make predictions. Many studies developed in this basin provided the conceptual model basis including a full free aquifer, lithological and hydraulical homogeneity in entire basin, null flux at plateau borders and aquifer base. The finite element method is the numerical method used and FEFLOW the computational algorithm. The simulated area was discretized in a single layer with 27.357,6 km² (314.432 elements and 320.452 nodes) totaling a 4.249,89 km³ volume. Were utilized 21 observation wells from CERB to calibrate the model. The terrain topography was obtained by SRTM data and the impermeable base was generated by interpolation of descriptive profiles from wells and electric vertical drilling from previous studies. Works in this area obtained mean recharge rates varying approximately from 20% to 25% of average precipitation, thus the values of model recharge zones varying in this range. Were distributed 4 hydraulic conductivity zones: (K1) west zone with K=6x10-5 m/s; (K2) center-east zone with K=3x10-4 m/s; (K3) far east zone with K=5x10-4 m/s; e (K4) east-north zone with K=1x10-5 m/s. Thereby was incorporated to the final conceptual model...

Fácies, diagênese e arquitetura estratigráfica de reservatórios deltaico-lacustres da fase rifte (formação pendência), campo Serraria da Bacia Potiguar

Of the four lacustrine deltaic models, which were found in the Pendência formation, two are represented in the Serraria field. Respectively the deltaic models 1 and 3 shows the reservoir zones A and B. The Zone A is divided into six sub-areas. Each is representing a smaller cycle of development of sigmoidal lobes of deltaic front. Zone B produces in reservoirs of Model 3, or so called Full delta. The Zone B is formed by overlapping the deltaic plain system over the deltaic/prodeltaic front (model 1). This work uses the method of zooming with the aim to contextualize the geometric aspects of the sand bodies, highlighting the analysis of facies and diagenesis with help of pictures and testimonies of thin sections. The sigmoidal lobes of Zone A are fine to very fine sandstones, well sorted, with a arcosian composition.;practically with a weak compaction and cementation of a kind of film of clay (if very fine) and overgrowth feldspar (fine texture). This silicate phases are succeeded by cementation of poiquilotópica calcite, and after this a stage of dissolution, containing only regular permoporosity for this reservoir. Zone B has a combination of two types of deltaic plain reservoir. One is the rarest of distributary channel and the other the most common of lobes of crevasse. In the channel coarse to medium-grained and poor to moderate sorted sandstones are formed (tuning up), and with a lytic arcosiana nature. Rarely there are cements, including growth of feldspar and rhombohedral dolomite, which prevent a high permoporosity of the reservoir. In the crevasse lobes, the sandstones are laminated, fine and well sorted, arkosic, rarely with overgrowth feldspar and calcite poiquilotópica, and with a good intergranular permoporosity

Avaliação da vulnerabilidade a contaminação das águas subterrâneas do aquífero Rio Claro na mineração Mandu, distrito de Ajapi - Rio Claro-SP

Groundwater in the Rio Claro district is predominantly extracted from low productivity wells on the Itararé Aquifer, from depths greater than 150 m. These factors in conjunction with increasing demand for water supply have stimulated many industries to exploit the Rio Claro Aquifer, constituted by Cenozoic sediments of the Rio Claro Formation, where hydraulic properties are poorly known. For this reason, it is necessary to study the possible vulnerable to contamination punctual locations of the aquifer, in order to enable proper management of these groundwater reserves and to allow continuity of supply. Thus, this study aims to assess the vulnerability to groundwater on contamination Rio Claro Aquifer, punctually in Mandu mining site area, located in the District of Ajapi, Rio Claro - SP, the company which operates and sells industrial sand. The risk of groundwater contamination depends on the relationship between the hydrogeological characteristics of the aquifer layer (vulnerability to contamination) and the pollutant load. To evaluate the susceptibility to contamination it was applied the method GOD (FOSTER and HIRATA, 1987; FOSTER et. al., 2002) and, in addition, field and laboratory tests were performed to chacacterize the granulometry of the strata, hydraulic conductivity and some physical indices to make the evaluation more assertive and detailed. Punctual contamination vulnerability found in the aquifer Rio Claro, was moderate, which means that the aquifer is vulnerable to some contaminants, but when continuously discharged or leached. Thus, Mandu mining has a great role on preventing the emission of contaminants in the process of extraction and processing of sand... (Complete abstract click electronic access below)

Geologia do platô N6 - província mineral de Carajás (SP)

The N6 Plateau presents an iron-ore occurence in Carajás Mineral Province, standing near to actually operating deposits. Geological mapping in 1:10,000 scale and integration of geochemical, geophysical, petrography and drilling turns possible interpretation of his geological evolution. The mapped area has lithotypes from Archean Grão Pará Group, comprising very lowgrade metamorphic basic rocks and iron formation and an Proterozoic sedimentary association of conglomeratic sandstones called as Caninana Unity. The structural geology in given by a regional scale homoclinal, where the Grão Pará Group strata dips towards SW, as a part of the Northern Limb of the Carajás Fold. Subsequent deformation associated to the installation of the Carajás Shear Zone presents as E-W fold axis. Geochemical evidence permits to consider de Parauapebas Formation as the rocks which has been hydrothermally-altered to outsourcing fluids responsible to deposition of iron formations in the oceanic system, including different signatures which can be interpreted as possible sub-embayments in the Carajás Basin. The iron ore in the area occurs in subsurface as very fine friable hematite generated by supergenous enrichment of the iron formation. The conceived geologic model differs from the current academic proposal on the fact that hydrothermal alteration has been involved on the jaspelite enrichment. Metamorphism on the Parauapebas Formation presents paragenesis considered as ocean-floor metamorphism which precedes de deformation insofar as the rocks show no tectonic fabric referring to shallow crust evolution. Geophysical methods such as magnetometry and gravimetry presents excellent results for structural interpretation in uneven exposed terrain

Mapeamento geológico-geontécnico de trecho da estrada vicinal na Serra de Itaqueri, Charqueada (SP)

Geological-geotechnical problems affecting escarps as well as embankment and fill slopes of roads and motorways may generate different types of unsteadiness, which are mainly arisen from the deficient knowledge about the physical environment. This results in unsuitable engineering projects and inadequate executions, which can be worsened by an occasional inappropriate maintenance of the construction. A geologically-geotechnically characterization of escarps and slopes is crucial in order to prevent these problems. This work deals with a geological-geotechnical study of 1:10.000 scale mapping in a stretch of a local road (CHQ-40) at the Serra de Itaqueri, Charqueada town, State of São Paulo. The stretch is known by several physical problems as erosion and mass movement. The methods of study were based on an integrative analysis of the diverse elements of the physical environment by using aerial photographs - to obtain the physiographic compartmentalization of terrain units - as well as field work - to accomplish the evaluation of the units by employing sketch lists. To achieve this, we selected several techniques in order to identify and classify different types of existing problems as erosion, landslide in embankments and fill slopes, rockfall, block rolling, among others. We also included the analysis of soil horizon, thickness and composition. The geological-geotechnical mapping resulted in six units: 1- Sandstones in cuesta’s backhill; 2 – Basalts in cuesta’s front; 3- Sandstones in cuesta’s front; 4 – Talus and colluvial deposits at cuesta’s foothill; 5- Sandstones of the Piramboia Formation in hillside; and 6 – Colluvial soil in the hill top. A characterization of the geological-geotechnical units is detailed, coupled to the cartographic material. Other cartographic products elaborated for this study included 1:10.000 maps of hypsometry, slope and curvature

Modelo petrofísico 3D do Arenito Namorado no Campo de Namorado - Bacia de Campos, RJ

The Namorado Oil Field represents the beginning of the oil exploration in Brazil, in the 70s, and it is still a subject of researches because the importance of this turbidite sandstone in the brazilian oil production. The Namorado’s production level was denominated “Namorado sandstone”, it is composed by turbidite sandstone deposited during the Albian-Cenomanian. In order to define the structural geometry of the main reservoir, geological and geophysical tools like RECON and Geographix (Prizm – Seisvision) softwares were used, and its application was focused on geological facies analysis, for that propose well logs, seismic interpretation and petrophysical calculations were applied. Along this work 15 vertical wells were used and the facies reservoirs were mapped of along the oil field; it is important to mentioned that the all the facies were calibrated by the correlation rock vs log profile, and 12 reservoir-levels (NA-1, NA-2, NA-3, NA-4, NA-5, NA-6, NA-7, NA-8, NA-9, NA-10, NA-11 e NA-12) were recognized and interpreted. Stratigraphic sections (NE-SW and NW-SE) were also built based on stratigraphic well correlation of each interpreted level, and seismic interpretation (pseudo-3D seismic data) on the southeastern portion of the oil field. As results it was interpreted on two- and three-dimensional maps that the deposition reservoir’s levels are hight controlled by normal faults systems. This research also shows attribute maps interpretation and its relationship with the selection of the reservoir attribute represented on it. Finally the data integration of stratigraphic, geophysical and petrophysical calculations lets us the possibility of obtain a detail geological/petrophysical 3D model of the main reservoir levels of “Namorado sandstone” inside the oil/gás field

Caracterização estrutural da Zona de Falha de Cássia-MG

A Zona de Falha de Cássia constitui um feixe de falhas de direção preferencial NW-SE e aproximadamente 2 km de largura. Dados de campo, petrográficos e microestruturais evidenciam uma longa história deformacional da zona de falha. Assim, foram caracterizadas três fases de atividade/movimentação da Zona de Falha de Cássia. A primeira fase (précambriana) é caracterizada por deformação em regime dúctil, acarretando na geração de milonitos formados em condições metamórficas de fácies xisto verde. Este é o estágio de formação da falha, apresentando caráter transcorrente oblíqua, com movimentação sinistral inversa. A segunda fase corresponde a uma reativação da zona de falha como uma falha normal, com bloco alto a NE e bloco baixo a SW da referida estrutura. Seu registro é dado pela ocorrência localizada de brechas e cataclasitos. Este episódio de deformação eminentemente rúptil é correlacionado com o Soerguimento do Alto Paranaíba, o que indica movimentação da falha no Neocretáceo. A terceira e última fase é marcada pela formação de depósitos sedimentares plio-pleistocênicos compostos por brecha sedimentar de leques aluviais e sedimentos argilosos lacustres. Tais depósitos são interpretados como originados pelo represamento da drenagem subatual e conseqüente mudança do nível de base local, em decorrência de uma reativação da Zona de Falha de Cássia. O referido pacote sedimentar apresenta-se localmente cortado por fraturas, zonas brechadas e falhas, caracterizando atividade neotectônica na região. Além disso, foi mostrada a forte influência da zona de falha no desenvolvimento da paisagem da região, sendo constatada a inversão do relevo e da drenagem na área estudada.

Quimioestratigrafia do vulcanismo ácido mesozóico da província magmática do Paraná: porção SE do estado de Santa Catarina

The Mesozoic acid volcanism of the Paraná-Etendeka Province can be considered as one of the biggest events of its kind in the Earth's surface, and its study have attracted special interest in characterizing the end of magmatism that preceded the rupture process and the formation of continental Africa and South America Although significant, the acid volcanism featuring Members Chapecó Palmas and Serra Geral Formation represents only 2.5% of the total generated by the magmatic rocks and perhaps therefore the existing literature on these rocks is well less significant than that on the basalts. However, there are still aspects still unclear about the origin and evolution of these rocks in relation to the associated basalts. Thus, two profiles were selected, called RA and TA, which be a systematic collection of samples from the base where the Botucatu Formation sandstones occur at the top, where they observe Palmas acid rock type. These samples should be analyzed for major, minor and trace elements and treated in specific diagrams to define the vertical variation lithochemistry and their possible relationships with the associated basalts

Sucessão estratigráfica do Andar Alagoas na Serra do Tonã, Bacia do Tucano (BA)

STRATIGRAPHIC SUCCESSION OF ALAGOAS STAGE ON SERRA DO TONÃ, TUCANO BASIN (BAHIA). Located in northeast of Bahia, serra do Tonã is a NS elongated plateau that standsout in the flattened relief of Tucano Basin. The stratigraphic succession belongs to the Aptian post-rift sequence of this basin. Based on facies analysis, vertical stratigraphic profiles and satelite images interpretation, three stacked stratigraphic units were recognized: (1) lower carbonate unit, composed by laminated limestones and breccias, 5 m thick, correlated with Camadas Batateira of Arripe Basin; (2) intermediate siliciclastic unit, 100m thick and made of sandstones exhibiting finning upward cycles, overlaid by mudstones and sandstones wich sedimentary structures suggest action of tidal currents and (3) upper carbonate unit, composed by laminated limestones, 2-10 m thick, related with Santana Formation, that record lacustrine environment with possible marine influence. Paleocurrent analysis indicates proviniance from north and paleoflows towards south, similar to the Aptian fluvial facies of Araripe Basin, showing that both basins integrated the same continental paleodrainage

Caracterização magnetométrica de Sill de diabásio na região de Limeira - SP

Pós-graduação em Geologia Regional - IGCE

Aplicação de fósforo e potássio na implantação de Corymbia citriodora (Hook.) K. D. Hill & L. A. S. Johnson

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Contexto deposicional da sequência Balbuena III (Maastrichtiano/ Daniano) da formação Yacoraite na sub-bacia metán-alemania, na região de Salta, Argentina

Pós-graduação em Geologia Regional - IGCE

Características químico-mineralógicas e cerâmicas da matéria-prima utilizada pelo polo cerâmico de Rio Verde de Mato Grosso, MG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)