Primary stability in cementless total hip replacement: measurement techniques and aided-surgery

Primary stability of stems in cementless total hip replacements is recognized to play a critical role for long-term survival and thus for the success of the overall surgical procedure. In Literature, several studies addressed this important issue. Different approaches have been explored aiming to evaluate the extent of stability achieved during surgery. Some of these are in-vitro protocols while other tools are coinceived for the post-operative assessment of prosthesis migration relative to the host bone. In vitro protocols reported in the literature are not exportable to the operating room. Anyway most of them show a good overall accuracy. The RSA, EBRA and the radiographic analysis are currently used to check the healing process of the implanted femur at different follow-ups, evaluating implant migration, occurance of bone resorption or osteolysis at the interface. These methods are important for follow up and clinical study but do not assist the surgeon during implantation. At the time I started my Ph.D Study in Bioengineering, only one study had been undertaken to measure stability intra-operatively. No follow-up was presented to describe further results obtained with that device. In this scenario, it was believed that an instrument that could measure intra-operatively the stability achieved by an implanted stem would consistently improve the rate of success. This instrument should be accurate and should give to the surgeon during implantation a quick answer concerning the stability of the implanted stem. With this aim, an intra-operative device was designed, developed and validated. The device is meant to help the surgeon to decide how much to press-fit the implant. It is essentially made of a torsional load cell, able to measure the extent of torque applied by the surgeon to test primary stability, an angular sensor that measure the relative angular displacement between stem and femur, a rigid connector that enable connecting the device to the stem, and all the electronics for signals conditioning. The device was successfully validated in-vitro, showing a good overall accuracy in discriminating stable from unstable implants. Repeatability tests showed that the device was reliable. A calibration procedure was then performed in order to convert the angular readout into a linear displacement measurement, which is an information clinically relevant and simple to read in real-time by the surgeon. The second study reported in my thesis, concerns the evaluation of the possibility to have predictive information regarding the primary stability of a cementless stem, by measuring the micromotion of the last rasp used by the surgeon to prepare the femoral canal. This information would be really useful to the surgeon, who could check prior to the implantation process if the planned stem size can achieve a sufficient degree of primary stability, under optimal press fitting conditions. An intra-operative tool was developed to this aim. It was derived from a previously validated device, which was adapted for the specific purpose. The device is able to measure the relative micromotion between the femur and the rasp, when a torsional load is applied. An in-vitro protocol was developed and validated on both composite and cadaveric specimens. High correlation was observed between one of the parameters extracted form the acquisitions made on the rasp and the stability of the corresponding stem, when optimally press-fitted by the surgeon. After tuning in-vitro the protocol as in a closed loop, verification was made on two hip patients, confirming the results obtained in-vitro and highlighting the independence of the rasp indicator from the bone quality, anatomy and preserving conditions of the tested specimens, and from the sharpening of the rasp blades. The third study is related to an approach that have been recently explored in the orthopaedic community, but that was already in use in other scientific fields. It is based on the vibration analysis technique. This method has been successfully used to investigate the mechanical properties of the bone and its application to evaluate the extent of fixation of dental implants has been explored, even if its validity in this field is still under discussion. Several studies have been published recently on the stability assessment of hip implants by vibration analysis. The aim of the reported study was to develop and validate a prototype device based on the vibration analysis technique to measure intra-operatively the extent of implant stability. The expected advantages of a vibration-based device are easier clinical use, smaller dimensions and minor overall cost with respect to other devices based on direct micromotion measurement. The prototype developed consists of a piezoelectric exciter connected to the stem and an accelerometer attached to the femur. Preliminary tests were performed on four composite femurs implanted with a conventional stem. The results showed that the input signal was repeatable and the output could be recorded accurately. The fourth study concerns the application of the device based on the vibration analysis technique to several cases, considering both composite and cadaveric specimens. Different degrees of bone quality were tested, as well as different femur anatomies and several levels of press-fitting were considered. The aim of the study was to verify if it is possible to discriminate between stable and quasi-stable implants, because this is the most challenging detection for the surgeon in the operation room. Moreover, it was possible to validate the measurement protocol by comparing the results of the acquisitions made with the vibration-based tool to two reference measurements made by means of a validated technique, and a validated device. The results highlighted that the most sensitive parameter to stability is the shift in resonance frequency of the stem-bone system, showing high correlation with residual micromotion on all the tested specimens. Thus, it seems possible to discriminate between many levels of stability, from the grossly loosened implant, through the quasi-stable implants, to the definitely stable one. Finally, an additional study was performed on a different type of hip prosthesis, which has recently gained great interest thus becoming fairly popular in some countries in the last few years: the hip resurfacing prosthesis. The study was motivated by the following rationale: although bone-prosthesis micromotion is known to influence the stability of total hip replacement, its effect on the outcome of resurfacing implants has not been investigated in-vitro yet, but only clinically. Thus the work was aimed at verifying if it was possible to apply to the resurfacing prosthesis one of the intraoperative devices just validated for the measurement of the micromotion in the resurfacing implants. To do that, a preliminary study was performed in order to evaluate the extent of migration and the typical elastic movement for an epiphyseal prosthesis. An in-vitro procedure was developed to measure micromotions of resurfacing implants. This included a set of in-vitro loading scenarios that covers the range of directions covered by hip resultant forces in the most typical motor-tasks. The applicability of the protocol was assessed on two different commercial designs and on different head sizes. The repeatability and reproducibility were excellent (comparable to the best previously published protocols for standard cemented hip stems). Results showed that the procedure is accurate enough to detect micromotions of the order of few microns. The protocol proposed was thus completely validated. The results of the study demonstrated that the application of an intra-operative device to the resurfacing implants is not necessary, as the typical micromovement associated to this type of prosthesis could be considered negligible and thus not critical for the stabilization process. Concluding, four intra-operative tools have been developed and fully validated during these three years of research activity. The use in the clinical setting was tested for one of the devices, which could be used right now by the surgeon to evaluate the degree of stability achieved through the press-fitting procedure. The tool adapted to be used on the rasp was a good predictor of the stability of the stem. Thus it could be useful for the surgeon while checking if the pre-operative planning was correct. The device based on the vibration technique showed great accuracy, small dimensions, and thus has a great potential to become an instrument appreciated by the surgeon. It still need a clinical evaluation, and must be industrialized as well. The in-vitro tool worked very well, and can be applied for assessing resurfacing implants pre-clinically.

Borrelia in granuloma annulare, morphea and lichen sclerosus: a PCR-based study and review of the literature

Morphea, granuloma annulare (GA) and lichen sclerosus et atrophicans (LSA) have also been suggested to be linked to Borrelia infection. Previous studies based on serologic data or detection of Borrelia by immunohistochemistry and polymerase chain reaction (PCR) reported contradictory results. Thus, we examined skin biopsies of morphea, GA and LSA by PCR to assess the prevalence of Borrelia DNA in an endemic area and to compare our results with data in the literature.

Delays in childhood immunization in a conflict area: a study from Sierra Leone during civil war

ABSTRACT: BACKGROUND: Sierra Leone has undergone a decade of civil war from 1991 to 2001. From this period few data on immunization coverage are available, and conflict-related delays in immunization according to the Expanded Programme on Immunization (EPI) schedule have not been investigated. We aimed to study delays in childhood immunization in the context of civil war in a Sierra Leonean community. METHODS: We conducted an immunization survey in Kissy Mess-Mess in the Greater Freetown area in 1998/99 using a two-stage sampling method. Based on immunization cards and verbal history we collected data on immunization for tuberculosis, diphtheria, tetanus, pertussis, polio, and measles by age group (0-8/9-11/12-23/24-35 months). We studied differences between age groups and explored temporal associations with war-related hostilities taking place in the community. RESULTS: We included 286 children who received 1690 vaccine doses; card retention was 87%. In 243 children (85%, 95% confidence interval (CI): 80-89%) immunization was up-to-date. In 161 of these children (56%, 95%CI: 50-62%) full age-appropriate immunization was achieved; in 82 (29%, 95%CI: 24-34%) immunization was not appropriate for age. In the remaining 43 children immunization was partial in 37 (13%, 95%CI: 9-17) and absent in 6 (2%, 95%CI: 1-5). Immunization status varied across age groups. In children aged 9-11 months the proportion with age-inappropriate (delayed) immunization was higher than in other age groups suggesting an association with war-related hostilities in the community. CONCLUSION: Only about half of children under three years received full age-appropriate immunization. In children born during a period of increased hostilities, immunization was mostly inappropriate for age, but recommended immunizations were not completely abandoned. Missing or delayed immunization represents an additional threat to the health of children living in conflict areas.

Disparities in bone density measurement history and osteoporosis medication utilisation in Swiss women: results from the Swiss Health Survey 2007

BACKGROUND Although factors associated with the utilisation of bone density measurement (BDM) and osteoporosis treatment have been regularly assessed in the US and Canada, they have not been effectively analysed in European countries. This study assessed factors associated with the utilisation of BDM and osteoporosis medication (OM) in Switzerland. METHODS The Swiss Health Survey 2007 data included self-reported information on BDM and OM for women aged 40 years and older who were living in private households. Multivariable logistic regression analysis was used to identify sociodemographic, socioeconomic, healthcare-related and osteoporosis risk factors associated with BDM and OM utilisation. RESULTS The lifetime prevalence of BDM was 25.6% (95% CI: 24.3-26.9%) for women aged 40 years and older. BDM utilisation was associated with most sociodemographic factors, all the socioeconomic and healthcare-related factors, and with major osteoporosis risk factors analysed. The prevalence of current OM was 7.8% (95% CI: 7.0-8.6%) and it was associated with some sociodemographic and most healthcare-related factors but only with one socioeconomic factor. CONCLUSIONS In Swiss women, ever having had a BDM and current OM were low and utilisation disparities exist according to sociodemographic, socioeconomic and healthcare-related factors. This might foster further health inequalities. The reasons for these findings should be addressed in further studies of the elderly women, including those living in institutions.

Dental knowledge and attitude toward school dental-health programs among parents of kindergarten children in Winterthur.

The current study investigated the attitudes and knowledge regarding diet and oral hygiene of parents with kindergarten children. The parents' statements were evaluated in terms of their socioeconomic background and were compared with the annual clinical examination of the children. The objective of the study was to assess the effectiveness of the school dental-health program and adapt it to today's societal needs. Of those who participated in the interview, 61% were Swiss, 16% were from former Yugoslavia or Turkey, and 12% each from the EU or other countries. Of the children examined, 39% already had caries, and 18% of those showed more than two lesions. The parents' knowledge correlated with the severity of the child's caries as well as with the parents' income, country of origin, and education. There was a correlation between the child's dental decay and lower income, as well as lower education and non-Swiss nationality of the parents. Parents with higher income and better education more often participated in the preschool's preventive program. Parents from former Yugoslavia or Turkey participated less frequently than parents from other countries. The study demonstrated that parents who especially needed instruction and prophylaxis are contacted too late or not at all through the dental-health program at kindergarten and that new approaches to prevention should be implemented to more effectively reach the parents.

Quantitative multi-slice computed tomography assessment of the mitral valvular complex for transcatheter mitral valve interventions part 1: systematic measurement methodology and inter-observer variability

AIMS Transcatheter mitral valve replacement (TMVR) is an emerging technology with the potential to treat patients with severe mitral regurgitation at excessive risk for surgical mitral valve surgery. Multimodal imaging of the mitral valvular complex and surrounding structures will be an important component for patient selection for TMVR. Our aim was to describe and evaluate a systematic multi-slice computed tomography (MSCT) image analysis methodology that provides measurements relevant for transcatheter mitral valve replacement. METHODS AND RESULTS A systematic step-by-step measurement methodology is described for structures of the mitral valvular complex including: the mitral valve annulus, left ventricle, left atrium, papillary muscles and left ventricular outflow tract. To evaluate reproducibility, two observers applied this methodology to a retrospective series of 49 cardiac MSCT scans in patients with heart failure and significant mitral regurgitation. For each of 25 geometrical metrics, we evaluated inter-observer difference and intra-class correlation. The inter-observer difference was below 10% and the intra-class correlation was above 0.81 for measurements of critical importance in the sizing of TMVR devices: the mitral valve annulus diameters, area, perimeter, the inter-trigone distance, and the aorto-mitral angle. CONCLUSIONS MSCT can provide measurements that are important for patient selection and sizing of TMVR devices. These measurements have excellent inter-observer reproducibility in patients with functional mitral regurgitation.

Community College Student Participation in Undergraduate Research: An Explanatory Case Study for Faculty and Research Mentors

This study adapted the current model of science undergraduate research experiences (URE's) and applied this novel modification to include community college students. Numerous researchers have examined the efficacy of URE's in improving undergraduate retention and graduation rates, as well as matriculation rates for graduate programs. However, none have detailed the experience for community college students, and few have employed qualitative methodologies to gather relevant descriptive data from URE participants. This study included perspectives elicited from both non-traditional student participants and the established laboratory community. The purpose of this study was to determine the effectiveness of the traditional model for a non-traditional student population. The research effort described here utilized a qualitative design and an explanatory case study methodology. Six non-traditional students from the Maine Community College System participated in this study. Student participants were placed in six academic research laboratories located throughout the state. Student participants were interviewed three times during their ten-week internship and asked to record their personal reflections in electronic format. Participants from the established research community were also interviewed. These included both faculty mentors and other student laboratory personnel. Ongoing comparative analysis of the textual data revealed that laboratory organizational structure and social climate significantly influence acculturation outcomes for non-traditional URE participants. Student participants experienced a range of acculturation outcomes from full integration to marginalization. URE acculturation outcomes influenced development of non-traditional students? professional and academic self-concepts. Positive changes in students? self-concepts resulted in greater commitment to individual professional goals and academic aspirations. The findings from this study suggest that traditional science URE models can be successfully adapted to meet the unique needs of a non-traditional student population – community college students. These interpretations may encourage post-secondary educators, administrators, and policy makers to consider expanded access and support for non-traditional students seeking science URE opportunities.

Back pain in migrant farmworker families and farmworker high school students from Starr County, Texas

Back symptoms are a major global public health problem with the lifetime prevalence ranging between 50-80%. Research suggests that work-related factors contribute to the occurrence of back pain in various industries. Despite the hazardous nature, strenuous tasks, and awkward postures associated with farm work, little is known about back injury and symptoms in farmworker adults and children. Research in the United States is particularly limited. This is a concern given the large proportion of migrant farmworkers in the United States without adequate access to healthcare as well as a substantial number of youth working in agriculture. The present study describes back symptoms and identifies work-related factors associated with back pain in migrant farmworker families and farmworker high school students from Starr County, TX. Two separate datasets were used from two cohort studies "Injury and Illness Surveillance in Migrant Farmworkers (MANOS)" (study A: n=267 families) and "South Texas Adolescent Rural Research Study (STARRS)" (study B: n=345). Descriptive and inferential statistics including multivariable logistic regression were used to identify work-related factors associated with back pain in each study. In migrant farmworker families, the prevalence of chronic back pain during the last migration season ranged from 9.5% among youngest children to 33.3% among mothers. Chronic back pain was significantly associated with increasing age; fairly bad/very bad quality of sleep while migrating; fewer than eight hours of sleep at home in Starr County, TX; depressive symptoms while migrating; self-provided water for washing hands/drinking; weeding at work; and exposure to pesticide drift/direct spray. Among farmworker adolescents, the prevalence of severe back symptoms was 15.7%. Severe back symptoms were significantly associated with being female; history of a prior accident/back injury; feeling tense, stressed, or anxious sometimes/often; lifting/carrying heavy objects not at work; current tobacco use; increasing lifetime number of migrant farmworker years; working with/around knives; and working on corn crops. Overall, results support that associations between work-related exposures and chronic back pain and severe back symptoms remain after controlling for the effect of non-work exposures in farmworker populations. ^

Sexual initiation of U.S. Latino and Colombian high school students: Toward a new theory of adolescent sexuality and implications for sexual health prevention and promotion

The general research question for this dissertation was: do the data on adolescent sexual experiences and sexual initiation support the explicit or implicit adolescent sexuality theories informing the sexual health interventions currently designed for youth? To respond to this inquiry, three different studies were conducted. The first study included a conceptual and historical analysis of the notion of adolescence introduced by Stanley Hall, the development of an alternative model based on a positive view of adolescent sexuality, and the rationale for introducing to adolescent sexual health prevention programs the new definitions of sexual health and the social determinants of health approach. The second one was a quantitative study aimed at surveying not only adolescents' risky sexual behaviors but also sexual experiences associated with desire/pleasure which have been systematically neglected when investigating the sexual and reproductive health of the youth. This study was conducted with a representative sample of the adolescents attending public high schools in the State of Caldas in the Republic of Colombia. The third study was a qualitative analysis of 22 interviews conducted with male and female U.S. Latino adolescents on the reasons for having had or having not had vaginal sex. The more relevant results were: most current adolescent sexual health prevention programs are still framed in a negative approach to adolescent sexuality developed a century ago by Stanley Hall and Sigmund Freud which do not accept the adolescent sexual experience and propose its sublimation. In contrast, the Colombian study indicates that, although there are gender differences, adolescence is for males and females a normal period of sexual initiation not limited to coital activity, in which sexual desire/pleasure is strongly associated with sexual behavior. By the same token, the study about the reasons for having had or not had initiated heterosexual intercourse indicated that curiosity, sexual desire/pleasure, and love are basic motivations for deciding to have vaginal sexual intercourse for the first time and that during adolescence, young women and men reach the cognitive development necessary for taking conscious decisions about their sexual acts. The findings underline the importance of asking pertinent questions about desire/pleasure when studying adolescent sexuality and adopting an evidence-based approach to sexual health interventions.^

Mistreatment and self-neglect in community dwelling older adults: Studies of construct validity, measurement invariance and latent classes

Mistreatment and self-neglect significantly increase the risk of dying in older adults. It is estimated that 1 to 2 million older adults experience elder mistreatment and self-neglect every year in the United States. Currently, there are no elder mistreatment and self-neglect assessment tools with construct validity and measurement invariance testing and no studies have sought to identify underlying latent classes of elder self-neglect that may have differential mortality rates. Using data from 11,280 adults with Texas APS substantiated elder mistreatment and self-neglect 3 studies were conducted to: (1) test the construct validity and (2) the measurement invariance across gender and ethnicity of the Texas Adult Protective Services (APS) Client Assessment and Risk Evaluation (CARE) tool and (3) identify latent classes associated with elder self-neglect. Study 1 confirmed the construct validity of the CARE tool following adjustments to the initial hypothesized CARE tool. This resulted in the deletion of 14 assessment items and a final assessment with 5 original factors and 43 items. Cross-validation for this model was achieved. Study 2 provided empirical evidence for factor loading and item-threshold invariance of the CARE tool across gender and between African-Americans and Caucasians. The financial status domain of the CARE tool did not function properly for Hispanics and thus, had to be deleted. Subsequent analyses showed factor loading and item-threshold invariance across all 3 ethnic groups with the exception of some residual errors. Study 3 identified 4-latent classes associated with elder self-neglect behaviors which included individuals with evidence of problems in the areas of (1) their environment, (2) physical and medical status, (3) multiple domains and (4) finances. Overall, these studies provide evidence supporting the use of APS CARE tool for providing unbiased and valid investigations of mistreatment and neglect in older adults with different demographic characteristics. Furthermore, the findings support the underlying notion that elder self-neglect may not only occur along a continuum, but that differential types may exist. All of which, have very important potential implications for social and health services distributed to vulnerable mistreated and neglected older adults.^

Growth of the Firm and Economic Backwardness: A Case Study and Analysis of China's Mobile Handset Industry

Economic backwardness often influences the growth of firms in developing countries. In this paper, we investigate the growth conditions and paths available for latecomers competing with first movers. Employing the concepts of boundaries of the firm and the disadvantage of backwardness, we present a case study of China's mobile handset industry and proceed to develop a simple model. We find that although significant disadvantage does not allow latecomers to grow, there are possibilities for changing the conditions of growth if latecomers can utilize outside resources and/or indigenous advantages.