Sviluppo di un sistema integrato per rampe isocrone di temperatura

Lo scopo del presente lavoro è la realizzazione e l'ottimizzazione di un software che, tramite l'utilizzo di un controllo automatico Proporzionale-Integrativo-Derivativo: PID, gestisca la temperatura di un fornetto in camera a vuoto. È necessario che il sistema sia in grado di eseguire rampe regolari di temperatura di diversa pendenza scelta dall'utente, in modo che possa essere utilizzato in futuro per esperimenti di Desorbimento Termico da parte di vari materiali. La tesi è così suddivisa, nel primo capitolo sono illustrati i concetti teorici di base utilizzati nello sviluppo dei controlli automatici. Nel secondo capitolo è descritta la parte hardware: sono mostrate le diverse sezioni che compongono il fornetto e la camera a vuoto, è inoltre illustrato il cablaggio che permette l'interfaccia del forno alla scheda Arduino ed al software LabVIEW. La terza sezione è dedicata agli studi svolti per la realizzazione del sistema di controllo PID e per la sua ottimizzazione. Il quarto capitolo è invece dedicato alla descrizione del software creato per la gestione del fornetto. Nel quinto capitolo sono infine mostrati i metodi utilizzati per il calcolo delle costanti operative del PID ed i risultati sperimentali ottenuti.

Cloud Base Height Measurement System Based on Stereo Vision with Automatic Calibration

Clouds are important in weather prediction, climate studies and aviation safety. Important parameters include cloud height, type and cover percentage. In this paper, the recent improvements in the development of a low-cost cloud height measurement setup are described. It is based on stereo vision with consumer digital cameras. The cameras positioning is calibrated using the position of stars in the night sky. An experimental uncertainty analysis of the calibration parameters is performed. Cloud height measurement results are presented and compared with LIDAR measurements.

Épocas de poda e uso de cianamida hidrogenada na brotação de videiras "Merlot" (Vitis vinifera L.) na Região da Campanha Gaúcha.

A Campanha Gaúcha vem sendo classificada entre as regiões vitivinícolas mais promissoras no Rio Grande do Sul, especialmente pelas suas condições edafoclimáticas com maior restrição hídrica e drenagem do solo. Apesar do início da vitivinicultura nesta região datar da década de 70, a maior intensificação dos plantios e produção ocorreu nos últimos dez anos, porém sem muitos subsídios técnicos. Os objetivos deste trabalho foram avaliar os efeitos da antecipação da poda hibernal e concentrações de cianamida hidrogenada (CH) sobre o potencial produtivo da uva ?Merlot?/SO4 conduzida nos sistemas de poda Guyot Duplo (DG) e Cordão Esporonado (CE).

Progettazione, ottimizzazione e sviluppo di un sistema WOPI (Water Out Pressure In) per airbox

Un airbox deve fornire al motore sia aria pura, ovvero priva di particelle estranee (motivo per cui al suo interno viene collocato un elemento filtrante), che priva di gocce d’acqua, la cui presenza è possibile sia a causa della condensazione dell’umidità dell’aria aspirata, sia, in volume anche maggiore, in caso di pioggia, aspetto su cui si focalizzerà questo elaborato. Attualmente, per eliminare la presenza di queste particelle d’acqua, vengono praticati fori, più o meno grandi, sulla parete dell’airbox. Questa semplice tecnica, permette di eliminarla, ma causa anche una depressurizzazione. Per contrastare questo fenomeno, è già noto l’utilizzo di condotti elastici, normalmente chiusi o semichiusi, che, nel frattempo, permettono la lenta discesa gravitazionale dell’acqua. Questo sistema, però, non è in grado di sigillare il foro di scolo, provocando quindi anch’esso un calo della pressurizzazione del box. Inoltre, esso potrebbe intasarsi, rendendo inefficace lo scolo. In più, nel tempo, potrebbe sopraggiungere una perdita di elasticità, causando un peggioramento della funzionalità. Scopo del WOPI è eliminare tutti i precedenti inconvenienti nel modo più efficiente possibile.

Sensori elettrochimici a base di PEDOT:PSS stampati a getto di inchiostro

Conductive polymers (CPS) are a class of carbon-based materials, capable of conducting electric current, characterized by metallic properties in combination with the intrinsic properties of conventional polymers. The structural model of the CP consists of a system of double π-conjugated on the backbone (polyene structure) which can easily undergo reversible doping reaching a wide range of conductivity. Thanks to their versatility and peculiar properties (mechanical flexibility, biocompatibility, transparency, ease of chemical functionalization, high thermal stability), CPS have revolutionized the science of materials giving rise to Organic Bioelectronics, the discipline resulting from the convergence between biology and electronics. The Poly (3,4-ethylenedioxythiophene) : poly (styrenesulfonate) (PEDOT: PSS), complex polyelectrolyte, in the form of a thin film, currently represents the reference standard in applications concerning Bioelectronics. In this project, two types of electrochemical sensors ink-jet printed on a flexible polymeric substrate, the polyethylene terephthalate, have been developed and characterized. The Drop on Demand (DOD) inkjet technology has allowed to control the positioning of fluid volumes of the order of picoliters with an accuracy of ± 25μm. This resulted in the creation of amperometric sensors and organic electrochemical transistors (OECT) all-PEDOT: PSS with high reproducibility. The sensors have been used for the determination of Ascorbic Acid (AA) which is currently considered an important benchmark in the field of sensors. In Cyclic Voltammetry, the amperometric sensor has detected AA at potentials less than 0.2 V vs. SCE thanks to the electrocatalytic properties of the PEDOT: PSS. On the other hand, the OECT detected AA concentrations equal to 10 nanomolar in Chronoamperometry. Furthermore, a promising new generation of all-printed OECTS, consisting of silver metal contacts, has been created. Preliminary results are presented.

Analysis and Evaluation of Tiny Machine Learning applications

The aim of TinyML is to bring the capability of Machine Learning to ultra-low-power devices, typically under a milliwatt, and with this it breaks the traditional power barrier that prevents the widely distributed machine intelligence. TinyML allows greater reactivity and privacy by conducting inference on the computer and near-sensor while avoiding the energy cost associated with wireless communication, which is far higher at this scale than that of computing. In addition, TinyML’s efficiency makes a class of smart, battery-powered, always-on applications that can revolutionize the collection and processing of data in real time. This emerging field, which is the end of a lot of innovation, is ready to speed up its growth in the coming years. In this thesis, we deploy three model on a microcontroller. For the model, datasets are retrieved from an online repository and are preprocessed as per our requirement. The model is then trained on the split of preprocessed data at its best to get the most accuracy out of it. Later the trained model is converted to C language to make it possible to deploy on the microcontroller. Finally, we take step towards incorporating the model into the microcontroller by implementing and evaluating an interface for the user to utilize the microcontroller’s sensors. In our thesis, we will have 4 chapters. The first will give us an introduction of TinyML. The second chapter will help setup the TinyML Environment. The third chapter will be about a major use of TinyML in Wake Word Detection. The final chapter will deal with Gesture Recognition in TinyML.

Nanomechanical characterization of soft bioelectronic interfaces via modeling-informed atomic force microscopy

The field of bioelectronics involves the use of electrodes to exchange electrical signals with biological systems for diagnostic and therapeutic purposes in biomedical devices and healthcare applications. However, the mechanical compatibility of implantable devices with the human body has been a challenge, particularly with long-term implantation into target organs. Current rigid bioelectronics can trigger inflammatory responses and cause unstable device functions due to the mechanical mismatch with the surrounding soft tissue. Recent advances in flexible and stretchable electronics have shown promise in making bioelectronic interfaces more biocompatible. To fully achieve this goal, material science and engineering of soft electronic devices must be combined with quantitative characterization and modeling tools to understand the mechanical issues at the interface between electronic technology and biological tissue. Local mechanical characterization is crucial to understand the activation of failure mechanisms and optimizing the devices. Experimental techniques for testing mechanical properties at the nanoscale are emerging, and the Atomic Force Microscope (AFM) is a good candidate for in situ local mechanical characterization of soft bioelectronic interfaces. In this work, in situ experimental techniques with solely AFM supported by interpretive models for the characterization of planar and three-dimensional devices suitable for in vivo and in vitro biomedical experimentations are reported. The combination of the proposed models and experimental techniques provides access to the local mechanical properties of soft bioelectronic interfaces. The study investigates the nanomechanics of hard thin gold films on soft polymeric substrates (Poly(dimethylsiloxane) PDMS) and 3D inkjet-printed micropillars under different deformation states. The proposed characterization methods provide a rapid and precise determination of mechanical properties, thus giving the possibility to parametrize the microfabrication steps and investigate their impact on the final device.

Thermal and air quality modeling of an electric vehicle cabin with low-cost sensors and reinforcement learning

The design process of any electric vehicle system has to be oriented towards the best energy efficiency, together with the constraint of maintaining comfort in the vehicle cabin. Main aim of this study is to research the best thermal management solution in terms of HVAC efficiency without compromising occupant’s comfort and internal air quality. An Arduino controlled Low Cost System of Sensors was developed and compared against reference instrumentation (average R-squared of 0.92) and then used to characterise the vehicle cabin in real parking and driving conditions trials. Data on the energy use of the HVAC was retrieved from the car On-Board Diagnostic port. Energy savings using recirculation can reach 30 %, but pollutants concentration in the cabin builds up in this operating mode. Moreover, the temperature profile appeared strongly nonuniform with air temperature differences up to 10° C. Optimisation methods often require a high number of runs to find the optimal configuration of the system. Fast models proved to be beneficial for these task, while CFD-1D model are usually slower despite the higher level of detail provided. In this work, the collected dataset was used to train a fast ML model of both cabin and HVAC using linear regression. Average scaled RMSE over all trials is 0.4 %, while computation time is 0.0077 ms for each second of simulated time on a laptop computer. Finally, a reinforcement learning environment was built in OpenAI and Stable-Baselines3 using the built-in Proximal Policy Optimisation algorithm to update the policy and seek for the best compromise between comfort, air quality and energy reward terms. The learning curves show an oscillating behaviour overall, with only 2 experiments behaving as expected even if too slow. This result leaves large room for improvement, ranging from the reward function engineering to the expansion of the ML model.

Integration of the computer controlled screwdriver for Robotic manufacturing in the ROS environment

The computer controlled screwdriver is a modern technique to perform automatic screwing/unscrewing operations.The main focus is to study the integration of the computer controlled screwdriver for Robotic manufacturing in the ROS environment.This thesis describes a concept of automatic screwing mechanism composed by universal robots, in which one arm of the robot is for inserting cables and the other is for screwing the cables on the control panel switch gear box. So far this mechanism is carried out by human operators and is a fairly complex one to perform, due to the multiple cables and connections involved. It's for this reason that an automatic cabling and screwing process would be highly preferred within automotive/automation industries. A study is carried out to analyze the difficulties currently faced and a controller based algorithm is developed to replace the manual human efforts using universal robots, thereby allowing robot arms to insert the cables and screw them onto the control panel switch gear box. Experiments were conducted to evaluate the insertion and screwing strategy, which shows the result of inserting and screwing cables on the control panel switch gearbox precisely.

“Study of Electro-thermal Effects on PLA Materials Fed with AC Currents”

Given the rise in the emergence of new composite materials, their multifunctional properties, and possible applications in simple and complex structural components, there has been a need to unravel the characterization of these materials. The possibility of printing these conductive composite materials has opened a new area in the design of structural components which can conduct, transmit, and modulate electric signals with no limitation from complex geometry. Although several works have researched the behaviour of polymeric composites due to the immediate growth, however, the electrothermal behaviour of the material when subjected to varying AC applied voltage (Joule’s effect) has not been thoroughly researched. This study presents the characterization of the electrothermal behaviour of conductive composites of a polylactic acid matrix reinforced with conductive carbon black particles (CB-PLA). An understanding of this behaviour would contribute to the improved work in additive manufacturing of functional electro-mechanical conductive materials with potential application in energy systems, bioelectronics, etc. In this study, the electrothermal interplay is monitored under applied AC voltage, varying lengths, and filament printing orientations (longitudinal, oblique, and transverse). Each sample was printed using the fused deposition modeling technique such that each specimen has three different lengths (1L, 2L, 2.75L). To this end, deductions were made on properties that affect composite’s efficiency and life expectancy. The result of this study shows a great influence of printing orientation on material properties of 3D printed conductive composites of CB-PLA. The result also identifies the contribution of AC applied voltage to composites' stabilization time. This knowledge is important to provide experimental background for components' electrothermal interplay, estimate possible degradation and operating limits of composite structures when used in applications.

Sperimentazione della piattaforma IoT Cloud per lo sviluppo di sistemi di monitoraggio

L’Internet of Things (IoT) è un termine utilizzato nel mondo della telecomunicazione che fa riferimento all’estensione di Internet al mondo degli oggetti, che acquisiscono una propria identità, venendo così definiti “intelligenti”. L’uomo in questo ambito avrà sempre meno incidenza sul campo poiché sono le macchine ad interagire tra loro scambiandosi informazioni. Gli ambiti applicativi che comprendono IoT sono innumerevoli ed eterogenei; pertanto, non esiste un'unica soluzione tecnologica che possa coprire qualsiasi scenario. Una delle tecnologie che si prestano bene a svolgere lavori in IoT sono le LoRaWAN. Un punto e una sfida essenziali nell'applicazione della tecnologia LoRaWAN è garantire la massima autonomia dei dispositivi ottenendo il più basso consumo di energia possibile e la ricerca di soluzioni di alimentazione efficienti. L'obiettivo in questo elaborato è quello di realizzare un sistema capace di trasmettere un flusso continuo di informazioni senza l'ausilio e il costante monitoraggio dell'uomo. Viene trattato come controllare dei sensori da remoto e come garantire una migliore autonomia dei dispositivi ottenendo un più basso consumo energetico.