The influence of flight speed on the ranging performance of bats using frequency modulated echolocation pulses

Many species of bat use ultrasonic frequency modulated (FM) pulses to measure the distance to objects by timing the emission and reception of each pulse. Echolocation is mainly used in flight. Since the flight speed of bats often exceeds 1% of the speed of sound,Doppler effects will lead to compression of the time between emission and reception as well as an elevation of the echo frequencies, resulting in a distortion of the perceived range. This paper describes the consequences of these Doppler effects on the ranging performance of bats using different pulse designs. The consequences of Doppler effects on ranging performance described in this paper assume bats to have a very accurate ranging resolution, which is feasible with a filterbank receiver. By modeling two receiver types, it was first established that the effects of Doppler compression are virtually independent of the receiver type. Then, used a cross-correlation model was used to investigate the effect of flight speed on Doppler tolerance and range–Doppler coupling separately. This paper further shows how pulse duration, bandwidth, function type, and harmonics influence Doppler tolerance and range–Doppler coupling. The influence of each signal parameter is illustrated using calls of several bat species. It is argued that range–Doppler coupling is a significant source of error in bat echolocation, and various strategies bats could employ to deal with this problem, including the use of range rate information are discussed.

The influence of internal load density on the energy and thermal performance of air-conditioned office buildings in the face of global warming

Internal heat sources may not only consume energy directly through their operation (e.g. lighting), but also contribute to building cooling or heating loads, which indirectly change building cooling and heating energy. Through the use of building simulation technique, this paper investigates the influence of building internal load densities on the energy and thermal performance of air conditioned office buildings in Australia. Case studies for air conditioned office buildings in major Australian capital cities are presented. It is found that with a decrease of internal load density in lighting and/or plug load, both the building cooling load and total energy use can be significantly reduced. Their effect on overheating hour reduction would be dependent on the local climate. In particular, it is found that if the building total internal load density is reduced from the base case of “medium” to “extra–low, the building total energy use under the future 2070 high scenario can be reduced by up to 89 to 120 kWh/m² per annum and the overheating problem could be completely avoided. It is suggested that the reduction in building internal load densities could be adopted as one of adaptation strategies for buildings in face of the future global warming.

Influence of traffic characteristics on polycyclic aromatic hydrocarbon build-up on urban road surfaces

Traffic is one of the prominent sources of polycyclic aromatic hydrocarbons (PAHs) and road surfaces are the most critical platform for stormwater pollution. Build-up of pollutants on road surfaces was the focus of this research study. The study found that PAHs build-up on road surfaces primarily originate from traffic activities, specifically gasoline powered vehicles. Other sources such as diesel vehicles, industrial oil combustion and incineration were also found to contribute to the PAH build-up. Additionally, the study explored the linkages between concentrations of PAHs and traffic characteristics such as traffic volume, vehicle mix and traffic flow. While traffic congestion was found to be positively correlated with 6- ring and 5- ring PAHs in road build-up, it was negatively correlated with 3-ring and 4 ring PAHs. The absence of positive correlation between 3-ring and 4-ring PAHs and traffic parameters is attributed to the propensity of these relatively volatile PAHs to undergo re-suspension and evaporation. The outcomes of this study are expected to contribute effective transport and land use planning for the prevention of PAH pollution in the urban environment.

The influence of abrasive pretreatment on hot air drying of grape

The drying of grapes is a more complex process compared to the dehydration of other agricultural materials due to the necessity of a pretreatment operation prior to drying. Grape drying to produce raisins is a very slow process, due to the peculiar structure of grape peel, that is covered by a waxy layer.Its removal has benn so far carried out by using several chemical pre-treatments. However, they cause heterogeneity in the waxes removal and create microscopic cracks. In this paper an abrasive pretreatment for enhancing the drying rate and preserving the grape samples is proposed. Two cultivars of grape were investigated: Regina white grape and Red Globe red grape. The drying kinetics of untreated and treated samples were studied using a convective oven at 50 C. Fruit quality parameters such as sugar and organic acid contents, shrinkage, texture, peel damage (i.e. by SEM analysis) and rehydration capacity were studied to evaluate the effectiveness of abrasive pretreatment on raisins. Abrasive pretreatment contributed to reduce drying time and rehydration time. The treated and untreated dried grapes were significantly different (p<0.05) in sugar and in tartaric acid content. On the contrary, no significant differences (p<0.05) in malic and citric acids in texture peoperties between untreated and treated samples were observed.

Influence of the structural characteristic of pyrolysis products on thermal stability of styrene-butadiene rubber composites reinforced by different particle sized kaolinites

A series of rubber composites were prepared by blending styrene-butadiene rubber (SBR) latex and the different particle sized kaolinites. The thermal stabilities of the rubber composites were characterized using thermogravimetry, digital photography, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. Kaolinite SBR composites showed much greater thermal stability when compared with that of the pure SBR. With the increase of kaolinite particle size, the pyrolysis products became much looser; the char layer and crystalline carbon content gradually decreased in the pyrolysis residues. The pyrolysis residues of the SBR composites filled with the different particle sized kaolinites showed some remarkable changes in structural characteristics. The increase of kaolinite particle size was not beneficial to form the compact and stable crystalline carbon in the pyrolysis process, and resulted in a negative influence in improving the thermal stability of kaolinite/SBR composites.

Pilot study comparing the influence of different types of exercise intervention on the fear of falling in older adults

Background: Individuals who fear falling may restrict themselves from performing certain activities and may increase their risk of falling. Such fear, reflected in the form of falls efficacy, has been measured in only a small number of studies measuring the effectiveness of exercise interventions in the elderly. This may be due to the various types of exercise that can be performed. Hence the effectiveness of exercise on falls efficacy is relatively understudied. Therefore, there is a need to measure falls efficacy as an outcome variable when conducting exercise interventions in the elderly. Methods: A total of 43 elderly community-dwelling volunteers were recruited and randomly allocated to a conventional exercise intervention, a holistic exercise intervention, or a control group. The interventions were performed 2 days per week for 10 weeks. Falls efficacy was measured at baseline and at the completion of the interventions using the Modified Falls Efficacy Scale (MFES). Results: Within group comparisons between baseline and follow-up indicated no significant improvements in falls efficacy, however, the difference for the conventional exercise group approached statistical significance (baseline 8.9 to follow-up 9.3; P = 0.058). Within group comparisons of mean difference MFES scores showed a significant difference between the conventional exercise group and the control group (conventional exercise group 0.4 vs control group −0.6; P < 0.05). Conclusion: Given the lack of significant improvements in falls efficacy found for any of the groups, it cannot be concluded whether a conventional or a holistic exercise intervention is the best approach for improving falls efficacy. It is possible that the characteristics of the exercise interventions including specificity, intensity, frequency and duration need to be manipulated if the purpose is to bring about improvements in falls efficacy.

Influence of pollutant build-up on variability in wash-off from urban road surfaces

Variability in the pollutant wash-off process is a concept which needs to be understood in-depth in order to better assess the outcomes of stormwater quality models, and thereby strengthen stormwater pollution mitigation strategies. Current knowledge about the wash-off process does not extend to a clear understanding of the influence of the initially available pollutant build-up on the variability of the pollutant wash-off load and composition. Consequently, pollutant wash-off process variability is poorly characterised in stormwater quality models, which can result in inaccurate stormwater quality predictions. Mathematical simulation of particulate wash-off from three urban road surfaces confirmed that the wash-off load of particle size fractions <150µm and >150µm after a storm event vary with the build-up of the respective particle size fractions available at the beginning of the storm event. Furthermore, pollutant load and composition associated with the initially available build-up of <150µm particles predominantly influence the variability in washed-off pollutant load and composition. The influence of the build-up of pollutants associated with >150µm particles on wash-off process variability is significant only for relatively shorter duration storm events.

Attributions of responsibility, blame and justifiability to a perpetrator and victim in an acquaintance rape scenario: The influence of Marijuana intoxication

Marijuana is a commonly used illicit drug by young adults and has been implicated in about one third of sexual assaults. However, the influence of Marijuana intoxication on rape attributions has not been previously investigated. This study examined the effects of perpetrator and victim Marijuana intoxication and participant sex on rape attributions. Young adults (N = 285) read an acquaintance rape scenario where Marijuana intoxication was manipulated and completed measures of perpetrator (responsibility, blame and justifiability) and victim attributions (responsibility and blame). The results revealed that an intoxicated, compared to sober, perpetrator was attributed less responsibility for his sexual aggression. When the victim was intoxicated, compared to sober, the perpetrator and victim were attributed less and more blame for the assault, respectively. These findings demonstrate that, irrespective of perceiver sex, Marijuana intoxication, like alcohol intoxication, results in an attributional double standard in favour of the perpetrator.

Influence of kaolinite particle size on cross-link density, microstructure and mechanical properties of latex blending styrene butadiene rubber composites

Cross-link density, microstructure and mechanical properties of styrene butadiene rubber (SBR) composites filled with different particle sized kaolinites are investigated. With the increase of kaolinite particle size, the cross-link density of the filled SBR composites, the dispersibility and orientation degree of kaolinite particles gradually decrease. Some big cracks in filled rubber composites are distributed along the fringe of kaolinite aggregates, and the absorbance of all the absorption bands of kaolinites gradually increase with the increase of kaolinite particle size. All mechanical property indexes of kaolinite filled SBR composites decrease due to the decrease of cross-linking and reduction of interface interaction between filler and rubber matrix.

The influence of organizational culture and climate on entrepreneurial intentions among research scientists

Over the past decades, universities have increasingly become involved in entrepreneurial activities. Despite efforts to embrace their ‘third mission’, universities still demonstrate great heterogeneity in terms of their involvement in academic entrepreneurship. This papers adopts an institutional perspective to understand how organizational characteristics affect research scientists’ entrepreneurial intentions. Specifically, we study the impact of university culture and climate on entrepreneurial intentions, including intentions to spin off a company, to engage in patenting or licensing and to interact with industry through contract research or consulting. Using a sample of 437 research scientists from Swedish and German universities, our results reveal that the extent to which universities articulate entrepreneurship as a fundamental element of their mission fosters research scientists’ intentions to engage in spin-off creation and intellectual property rights, but not industry-science interaction. Furthermore, the presence of university role models positively affects research scientists’ propensity to engage in entrepreneurial activities, both directly and indirectly through entrepreneurial self-efficacy. Finally, research scientists working at universities which explicitly reward people for ‘third mission’ related output show higher levels of spin-off and patenting or licensing intentions. This study has implications for both academics and practitioners, including university managers and policy makers.

The influence of financial risk tolerance and risk perception on individual investment decision-making in a financial advice context

The aim of this thesis is to examine how risk tolerance and risk perception, two important but often misunderstood constructs, jointly influence client investment decisions in a financial advice context. By distinguishing the roles of these two risk constructs in client decision-making, in this thesis a new direction in studying financial/investment risks is provided while practice and regulation in the financial services industry is potentially informed. Based on the literature relating to risks and individual decision-making, a theoretical framework is developed and relevant hypotheses are tested in two studies with financial adviser clients in Australia. Results reveal that financial risk tolerance influences asset allocation both directly and indirectly through risk perception. The intervening role of risk perception suggests that risk tolerance affects how clients perceive the riskiness of an investment product which influences client decision-making.

Impaction of spray droplets on leaves: Influence of formulation and leaf character on shatter, bounce and adhesion

This paper combines experimental data with simple mathematical models to investigate the influence of spray formulation type and leaf character (wettability) on shatter, bounce and adhesion of droplets impacting with cotton, rice and wheat leaves. Impaction criteria that allow for different angles of the leaf surface and the droplet impact trajectory are presented; their predictions are based on whether combinations of droplet size and velocity lie above or below bounce and shatter boundaries. In the experimental component, real leaves are used, with all their inherent natural variability. Further, commercial agricultural spray nozzles are employed, resulting in a range of droplet characteristics. Given this natural variability, there is broad agreement between the data and predictions. As predicted, the shatter of droplets was found to increase as droplet size and velocity increased, and the surface became harder to wet. Bouncing of droplets occurred most frequently on hard to wet surfaces with high surface tension mixtures. On the other hand, a number of small droplets with low impact velocity were observed to bounce when predicted to lie well within the adhering regime. We believe this discrepancy between the predictions and experimental data could be due to air layer effects that were not taken into account in the current bounce equations. Other discrepancies between experiment and theory are thought to be due to the current assumption of a dry impact surface, whereas, in practice, the leaf surfaces became increasingly covered with fluid throughout the spray test runs.

Advance care planning in stroke: Influence of time on engagement in the process

Purpose Individuals who experience stroke have a higher likelihood of subsequent stroke events, making it imperative to plan for future medical care. In the event of a further serious health event, engaging in the process of advanced care planning (ACP) can help family members and health care professionals (HCPs) make medical decisions for individuals who have lost the capacity to do so. Few studies have explored the views and experiences of patients with stroke about discussing their wishes and preferences for future medical events, and the extent to which stroke HCPs engage in conversations around planning for such events. In this study, we sought to understand how the process of ACP unfolded between HCPs and patients post-stroke. Patients and methods Using grounded theory (GT) methodology, we engaged in direct observation of HCP and patient interactions on an acute stroke unit and two stroke rehabilitation units. Using semi-structured interviews, 14 patients and four HCPs were interviewed directly about the ACP process. Results We found that open and continual ACP conversations were not taking place, patients experienced an apparent lack of urgency to engage in ACP, and HCPs were uncomfortable initiating ACP conversations due to the sensitive nature of the topic. Conclusion In this study, we identified lack of engagement in ACP post-stroke, attributable to patient and HCP factors. This encourages us to look further into the process of ACP in order to develop open communication between the patient with stroke, their families, and stroke HCPs.