Tribological properties of γ-Y2Si2O7 ceramic against AISI 52100 steel and Si3N4 ceramic counterparts

Reciprocating ball-on-flat dry sliding friction and wear experiments have been conducted on singlephase γ-Y2Si2O7 ceramic flats in contact with AISI 52100 bearing steel and Si3N4 ceramic balls at 5-15N normal loads in an ambient environment. The kinetic friction coefficients of γ-Y2Si2O7 varied in the range over 0.53-0.63 against AISI 52100 steel and between 0.51-0.56 against Si3N4 ceramic. We found thatwear occurred predominantly during the running-in period and it almost ceased at the steady friction stage. The wear rates of γ-Y2Si2O7 were in the order of 10-4mm3/(N m). Besides, wear debris strongly influenced the friction and wear processes. The strong chemical affinity between γ-Y2Si2O7 and AISI 52100 balls led to a thick transfer layer formed on both contact surfaces of the flat and counterpart ball, which changed the direct sliding between the ball and the flat into a shearing within the transfer layer. For the γ-Y2Si2O7/Si3N4 pair, a thin silica hydrate lubricant tribofilm presented above the compressed debris entrapped in the worn track and contact ball surface. This transfer layer and the tribofilm separated the sliding couple from direct contact and contributed to the low friction coefficient and wear rate.

A numerical study of the effect of loading conditions on tubular hydroforming

In this work, the mechanics of tubular hydroforming under various types of loading conditions is investigated. The main objective is to contrast the effects of prescribing fluid pressure or volume flow rate, in conjunction with axial displacement, on the stress and strain histories experienced by the tube and the process of bulging. To this end, axisymmetric finite element simulations of free hydroforming (without external die contact) of aluminium alloy tubes are carried out. Hill’s normally anisotropic yield theory along with material properties determined in a previous experimental study [A. Kulkarni, P. Biswas, R. Narasimhan, A. Luo, T. Stoughton, R. Mishra, A.K. Sachdev, An experimental and numerical study of necking initiation in aluminium alloy tubes during hydroforming, Int. J. Mech. Sci. 46 (2004) 1727–1746] are employed in the computations. It is found that while prescribed fluid pressure leads to highly non-proportional strain paths, specified fluid volume flow rate may result in almost proportional ones for the predominant portion of loading. The peak pressure increases with axial compression for the former, while the reverse trend applies under the latter. The implication of these results on failure by localized necking of the tube wall is addressed in a subsequent investigation.

Novel fluorescence detection technique for non-contact temperature sensing in microchip PCR

DNA amplification using Polymerase Chain Reaction (PCR) in a small volume is used in Lab-on-a-chip systems involving DNA manipulation. For few microliters of volume of liquid, it becomes difficult to measure and monitor the thermal profile accurately and reproducibly, which is an essential requirement for successful amplification. Conventional temperature sensors are either not biocompatible or too large and hence positioned away from the liquid leading to calibration errors. In this work we present a fluorescence based detection technique that is completely biocompatible and measures directly the liquid temperature. PCR is demonstrated in a 3 ILL silicon-glass microfabricated device using non-contact induction heating whose temperature is controlled using fluorescence feedback from SYBR green I dye molecules intercalated within sensor DNA. The performance is compared with temperature feedback using a thermocouple sensor. Melting curve followed by gel electrophoresis is used to confirm product specificity after the PCR cycles. (c) 2007 Elsevier B.V. All rights reserved.

Suitability of a point-contact SAW-based stiffness transducer for biomedical applications

Methods of diagnosis in Biomedical applications can be broadly divided into contact and non-contact based methods. So far, ultrasound based methods have been found to be most favorable for non-contact, non-invasive diagnosis, especially in the case of tissue stiffness analysis. We report here, the fabrication and characterization details of a new contact based transducer system for qualitative determination of the stiffnesses of non-piezoelectric substrates using the phenomenon of Surface Acoustic Waves (SAW). Preliminary trials to study the functionality of this system were carried out on various metallic and non-metallic substrates, and the results were found to be satisfactory. To confirm the suitability of this system for biomedical applications, similar trials have been conducted on tissue mimicking phantoms with varying degrees of stiffness.

Tuntemattomista vertaistuttaviksi : Esikoisäitien ja -isien perhevalmennusprosessi Espoon uudentyyppisessä perhevalmennuskokeilussa

From Strangers to Peer Acquaintances Mothers and Fathers with a First Born and their Experiences of the New Family Training Process in Espoo This research is composed of two interrelated case studies. The first case was a family training experiment conducted in the City of Espoo during 2003 2005. In the experiment, the content, duration and procedures were modified from the previous family training policy. The new family training system stressed peer group activities and the peer support formed between the participating mothers and fathers. The second case comprised the stories of 14 parents about the family training process. The aim of the research was to find out whether peer group activities and support was demonstrated between the participating parents during the family training process. The second case and its narrative material constituted the main research material. The narrative material was collected by interviews. Eight mothers and six fathers were interviewed twice within a year between their sessions. The parents also filled in questionnaires about their daily life and participated in a drawing exercise, in which they visualized how they experienced the family training during the antenatal period, labour and the postnatal period. A narrative approach was applied to the analysis of the narrative material. The analysis consisted of several stages. In the final stage, the fathers main story was combined with all the participating fathers personal stories. The mothers main story was also constructed from their personal stories. The study implicated that in some parts the mothers and fathers main stories were similar. During the family training, previously unacquainted parents became peer acquaintances. In particular, the first born as a focus created interaction and cooperation among the parents. Parents in similar circumstances became significant to each other. Different figurations formed during the family training. However, the main stories did not always entwine. The mothers were in contact with the other mothers almost daily using mobile phones, email and mother-child activities. The fathers employed outside home met each other only during the family training meetings, but felt being supported by the other fathers. Some families visited one another outside of the family training. This new type of family training had characteristics typical of the project society. The parents peer activities were based on trust, negotiation and contracts between partners. The parents evaluated the benefits of participation in the family training. If they appreciated the activities with peers and peer compassion, they were willing to participate in the family training during the postnatal period. Keywords: family training, parenthood, motherhood, fatherhood, peer, peer group, peer support, social support, social relationships, figurations, the project society, pastoral power, epistolary power

The Critical Role of N- and C-Terminal Contact in Protein Stability and Folding of a Family 10 Xylanase under Extreme Conditions

Background: Stabilization strategies adopted by proteins under extreme conditions are very complex and involve various kinds of interactions. Recent studies have shown that a large proportion of proteins have their N- and C-terminal elements in close contact and suggested they play a role in protein folding and stability. However, the biological significance of this contact remains elusive. Methodology: In the present study, we investigate the role of N- and C-terminal residue interaction using a family 10 xylanase (BSX) with a TIM-barrel structure that shows stability under high temperature,alkali pH, and protease and SDS treatment. Based on crystal structure,an aromatic cluster was identified that involves Phe4, Trp6 and Tyr343 holding the Nand C-terminus together; this is a unique and important feature of this protein that might be crucial for folding and stabilityunder poly-extreme conditions. Conclusion: A series of mutants was created to disrupt this aromatic cluster formation and study the loss of stability and function under given conditions. While the deletions of Phe4 resulted in loss of stability, removal of Trp6 and Tyr343 affected in vivo folding and activity. Alanine substitution with Phe4, Trp6 and Tyr343 drastically decreased stability under all parameters studied. Importantly,substitution of Phe4 with Trp increased stability in SDS treatment.Mass spectrometry results of limited proteolysis further demonstrated that the Arg344 residue is highly susceptible to trypsin digestion in sensitive mutants such as DF4, W6A and Y343A, suggesting again that disruption of the Phe4-Trp6-Tyr343 (F-W-Y) cluster destabilizes the N-and C-terminal interaction. Our results underscore the importance of N- and C-terminal contact through aromatic interactions in protein folding and stability under extreme conditions, and these results may be useful to improve the stability of other proteins under suboptimal conditions.

The Nature of Learning about Customers in a Customer Service Setting - A Study of Frontline Contact Persons

The starting point of this thesis is the notion that in order for organisations to understand what customers value and how customers experience service, they need to learn about customers. The first and perhaps most important link in an organisation-wide learning process directed at customers is the frontline contact person. Service- and sales organisations can only learn about customers if the individual frontline contact persons learn about customers. Even though it is commonly recognised that learning about customers is the basis for an organisation’s success, few contributions within marketing investigate the fundamental nature of the phenomenon as it occurs in everyday customer service. Thus, what learning about customers is and how it takes place in a customer-service setting is an issue that is neglected in marketing research. In order to explore these questions, this thesis presents a socio-cultural approach to understanding learning about customers. Hence, instead of considering learning equal to cognitive processes in the mind of the frontline contact person or learning as equal to organisational information processing, the interactive, communication-based, socio-cultural aspect of learning about customers is brought to the fore. Consequently, the theoretical basis of the study can be found both in socio-cultural and practice-oriented lines of reasoning, as well as in the fields of service- and relationship marketing. As it is argued that learning about customers is an integrated part of everyday practices, it is also clear that it should be studied in a naturalistic and holistic way as it occurs in a customer-service setting. This calls for an ethnographic research approach, which involves direct, first-hand experience of the research setting during an extended period of time. Hence, the empirical study employs participant observations, informal discussions and interviews among car salespersons and service advisors at a car retailing company. Finally, as a synthesis of theoretically and empirically gained understanding, a set of concepts are developed and they are integrated into a socio-cultural model of learning about customers.

An Experimental Study to Show the Effect of Thermal Stress on Thermal Contact Conductance at Sub-megapascal Contact Pressures

Experimental studies are presented to show the effect of thermal stresses on thermal contact conductance (TCC) at low contact pressures. It is observed that in a closed contact assembly, contact pressure acting on the interface changes with the changing temperature of contact members. This change in contact pressure consequently causes variations in the TCC of the junction. A relationship between temperature change and the corresponding magnitude of developed thermal stress in a contact assembly is determined experimentally. Inclusion of a term called temperature dependent load correction factor is suggested in the theoretical model for TCC to make it capable of predicting TCC values more accurately in contact assemblies that experience large temperature fluctuations. [DOI: 10.1115/1.4001615]

A note on the equivalence of shock manifold equations

The shock manifold equation is a first order nonlinear partial differential equation, which describes the kinematics of a shockfront in an ideal gas with constant specific heats. However, it was found that there was more than one of these shock manifold equations, and the shock surface could be embedded in a one parameter family of surfaces, obtained as a solution of any of these shock manifold equations. Associated with each shock manifold equation is a set of characteristic curves called lsquoshock raysrsquo. This paper investigates the nature of various associated shock ray equations.

Deformation and friction of MoS2 particles in liquid suspensions used to lubricate sliding contact

Tribology of a well known solid lubricant molybdenum disulphide is studied here in water and oil medium, over a large range of contact dimensions. Lateral force microscopy is used to identify the deformation modes, intra-crystalline slip, plastic grooving, fragmentation and fracture, of single particles The medium and agglomeration were found to dictate the deformation mode Steel on steel tribology lubricated by suspensions of these particles in liquid media was conducted over a range of contact pressure and sliding velocity. A scrutiny of the frictional data with the aid of Raman spectroscopy to identify the transfer film, suggested that the particle size, as it is at contact, is an important tribological parameter Ultrasonication of the suspension and dispersion of the particle by surfactants were used to control the apriori particle size fed into the suspension.Correspondence of friction data of the gently sonicated suspension with that of the ultrasonicated suspension with dispersants indicated the importance of liquid ingestion by these particles as it controls their mode of deformation and consequent tribology. (C) 2010 Elsevier B V All rights reserved.

Human parvovirus infections during pregnancy : Special reference to the child-care employees

Human parvovirus B19 (B19V) is known to cause anemia, hydrops fetalis, and fetal death especially during the first half of pregnancy. Women who are in occupational contact with young children are at increased risk of B19V infection. The role of the recently discovered human parvovirus, human bocavirus (HBoV), in reproduction is unknown. The aim of this research project was to establish a scientific basis for assessing the work safety of pregnant women and for issuing special maternity leave regulations during B19V epidemics in Finland. The impact of HBoV infection on the pregnant woman and her fetus was also defined. B19V DNA was found in 0.8% of the miscarriages and in 2.4% of the intrauterine fetal death (IUFD; fetal death after completed 22 gestational weeks). All control fetuses (from induced abortions) were B19V-DNA negative. The findings on hydropic B19V DNA-positive IUFDs with evidence of acute or recent maternal B19V infection are in line with those of previous Swedish studies. However, the high prevalence of B19V-related nonhydropic IUFDs noted in the Swedish studies was mostly without evidence of maternal B19V infection and was not found during the third trimester. HBoV was not associated with miscarriages or IUFDs. Almost all of the studied pregnant women were HboV-IgG positive, and thus most probably immune to HBoV. All preterm births, perinatal deaths, smallness for gestational age (SGA) and congenital anomaly were recorded among the infants of child-care employees in a nationwide register-based cohort study over a period of 14 years. Little or no differences in the results were found between the infants of the child-care employees and those of the comparison group. The annual B19V seroconversion rate was over two-fold among the child-care employees, compared to the women in the comparison group. The seropositivity of the child-care employees increased with age, and years from qualification/joining the trade union. In general, the child-care employees are not at increased risk for adverse pregnancy outcome. However, at the population level, the risk of rare events, such as adverse pregnancy outcomes attributed to infections, could not be determined. According to previous studies, seronegative women had a 5 10% excess risk of losing the fetus during the first half of their pregnancy, but thereafter the risk was very low. Therefore, an over two-fold increased risk of B19V infection among child-care employees is considerable, and should be taken into account in the assessment of the occupational safety of pregnant women, especially during the first half of their pregnancy.

Thermal gap conductance at low contact pressures (<1 MPa): Effect of gold plating and plating thickness

Thermal contact conductance (TCC) measurements are made on bare and gold plated (<= 0.5 mu m) oxygen free high conductivity (OFHC) Cu and brass contacts in vacuum, nitrogen, and argon environments. It is observed that the TCC in gaseous environment is significantly higher than that in vacuum due to the enhanced thermal gap conductance. It is found that for a given contact load and gas pressure, the thermal gap conductance for bare OFHC Cu contacts is higher than that for gold plated contacts. It is due to the difference in the molecular weights of copper and gold, which influences the exchange of kinetic energy between the gas molecules and contact surfaces. Furthermore, the gap conductance is found to increase with increasing thickness of gold plating. Topography measurements and scanning electron microscopy (SEM) analysis of contact surfaces revealed that surfaces become smoother with increasing gold plating thickness, thus resulting in smaller gaps and consequently higher gap conductance. (C) 2010 Elsevier Ltd. All rights reserved.

1-(3,5-Diethyl-1H-pyrazol-1-yl)-3-phenylisoquinoline

In the title molecule, C22H21N3, the isoquinoline ring is almost planar maximum deviation = 0.046 (1) A] and makes dihedral angles of 52.01 (4) and 14.61 (4)degrees with the pyrazole and phenyl rings, respectively. The phenyl ring and the pyrazole ring are twisted by 44.20 (6)degrees with respect to each other. The terminal C atoms of both of the ethyl groups attached to the pyrazole ring are disordered over two sites with occupancy ratios of 0.164 (7):0.836 (7) and 0.447 (16):0.553 (16). A weak intramolecular C-H...N contact may influence the molecular conformation. The crystal structure is stabilized by C-H...pi contacts involving the phenyl and pyrazole rings, and by pi-pi stacking interactions involving the pyridine and benzene rings centroid-centroid distance = 3.5972 (10) A].