976 resultados para Adsorção de CO2
Resumo:
This paper analyses the international inequalities in CO2 emissions intensity for the period 1971–2009 and assesses explanatory factors. Multiplicative, group and additive methodologies of inequality decomposition are employed. The first allows us to clarify the separated role of the carbonisation index and the energy intensity in the pattern observed for inequalities in CO2 intensities; the second allows us to understand the role of regional groups; and the third allows us to investigate the role of different fossil energy sources (coal, oil and gas). The results show that, first, the reduction in global emissions intensity has coincided with a significant reduction in international inequality. Second, the bulk of this inequality and its reduction are attributed to differences between the groups of countries considered. Third, coal is the main energy source explaining these inequalities, although the growth in the relative contribution of gas is also remarkable. Fourth, the bulk of inequalities between countries and its decline are explained by differences in energy intensities, although there are significant differences in the patterns demonstrated by different groups of countries. JEL codes: D39; Q43; Q56. Key words: CO2 international distribution, inequality decomposition, CO2 emissions intensity
Resumo:
O objetivo deste trabalho foi avaliar o efeito da força iônica na adsorção de Cd em amostras de 17 Latossolos (horizonte A) de diversas regiões geográficas do Brasil. A reação dos solos com 0,167 mmol L-1 de Cd(NO3)2 foi avaliada por 72 horas em soluções de Ca(NO3)2 a 5, 50 e 150 mmol L-1 (pH 6,5; relação solo:solução 1:100) com forças iônicas de 15, 150 e 450 mmol L-1, respectivamente. A adsorção de Cd decresceu com o aumento da força iônica em todos os solos, com valores médios adsorvidos iguais a 12,17, 6,92 e 5,70 mmol kg-1 para as forças iônicas de 15, 150 e 450 mmol L-1, respectivamente. Na menor força iônica, a fração de Cd adsorvida foi positivamente correlacionada com argila, matéria orgânica, área superficial específica, caulinita, hematita e Fe2O3 extraído pelo ataque sulfúrico, ditionito-citrato-bicarbonato de sódio e pelo oxalato ácido de amônio, além do Al2O3 do ataque sulfúrico. Para a força iônica de 150 mmol L-1, não houve correlação entre a fração de Cd adsorvida e os atributos dos solos, enquanto em 450 mmol L-1 houve correlação com a matéria orgânica e área superficial específica. O Cd não é retido por sítios de adsorção específica, sendo potencialmente biodisponível nesses Latossolos.
Resumo:
O objetivo deste trabalho foi avaliar o comportamento adsortivo do nitrato em relação às modificações da carga líquida do solo decorrentes da adição de ácidos, bases (carbonatos), fosfato e sulfato. Foram utilizadas amostras dos horizontes A e B de dois solos: Latossolo Vermelho acriférrico e Nitossolo Vermelho eutrófico. Para verificar o comportamento adsortivo do nitrato em relação aos tratamentos, ajustaram-se isotermas de adsorção de Freundlich (exponencial). O modelo de Freundlich descreve satisfatoriamente a adsorção do nitrato ao solo em todos os tratamentos. Existe correlação significativa entre o pH e a carga líquida dos solos, considerando-se os tratamentos aplicados ao horizonte B do Latossolo Vermelho. A adsorção do nitrato nos horizontes A e B comporta-se de maneira diferenciada nos dois solos utilizados. No Latossolo Vermelho, a adsorção é maior no horizonte subsuperficial em relação ao superficial. No Nitossolo Vermelho, a adsorção é maior no horizonte superficial em relação ao subsuperficial. As adições de sulfato e de fosfato ao solo resultam em pequena diminuição na adsorção de nitrato em relação ao observado no horizonte B do Latossolo Vermelho acriférrico.
Resumo:
O objetivo deste trabalho foi avaliar o efeito da força iônica da solução de equilíbrio sobre a adsorção e dessorção de arsênio, em 17 latossolos, de diferentes regiões geográficas brasileiras. A adsorção de As foi avaliada em dois valores de força iônica (15 e 150 mmol L-1), duas doses de As (15 e 150 µmol L-1), relação solo:solução final de 1:100 e pH 5,5. Não houve diferença nas porcentagens de adsorção, entre os valores de força iônica 15 e 150 mmol L-1 (63,51 e 64,46%). A porcentagem de dessorção na dose 15 µmol L-1 foi inferior a 15%, nos dois valores de força iônica, exceto para os solos LVd4 e LAd1, em que a porcentagem de dessorção foi superior a 20%.
Resumo:
O objetivo deste trabalho foi avaliar a adsorção e a lixiviação do boro em Latossolo Vermelho-Amarelo distrófico, cultivado com soja, em conseqüência das doses de boro e da calagem. Foram analisadas amostras de um solo do Estado do Mato Grosso, cultivado com soja durante três anos, com doses de 0, 1,5, 3, 4,5, 6, 7,5 e 9 Mg ha-1 de calcário, e 0, 1, 3, 5, 7 e 10 kg ha-1 de boro, aplicados no primeiro ano de cultivo. Foram determinadas isotermas de adsorção de boro em função da calagem e do tempo de cultivo, assim como a lixiviação em função da calagem e da adubação boratada. No caso da calagem, mesmo com doses relativamente altas de calcário, a adsorção de boro pelo solo é muito alta apenas no ano de aplicação do corretivo, e diminui significativamente com o tempo. No entanto, a lixiviação de boro guarda estreita relação com o teor do nutriente no solo e com a dose do nutriente que é aplicada, mas é pouco influenciada pela calagem.
Resumo:
O objetivo deste trabalho foi determinar a capacidade de adsorção de cádmio e de chumbo e avaliar a influência das propriedades dos solos sobre os parâmetros de adsorção desses elementos em solos tropicais altamente intemperizados. Foram utilizados quatro Latossolos e um Argissolo. Amostras de 1 g de solo foram agitadas por 16 horas, com soluções de CaCl2 0,01 mol L-1, às quais foram adicionadas 0, 10, 20, 30, 40, 60 e 80 µg mL-1 de cádmio e 0, 10, 20, 40, 60, 80, 100 e 120 µg mL-1 de chumbo na forma de nitrato. As quantidades adsorvidas foram determinadas mediante análise dos elementos no sobrenadante, e os dados foram ajustados às isotermas de Langmuir e de Freundlich. Os resultados experimentais ajustaram-se aos modelos estudados. A adsorção máxima de cádmio variou de 136 a 1.604 µg g-1 e a de chumbo, de 988 a 1.660 µg g-1. As energias de ligação variaram de 0,0036 a 0,0403 µg mL-1 e de 0,0282 a 1,0425 µg mL-1 para cádmio e chumbo, respectivamente. Os atributos dos solos correlacionados à adsorção de cádmio foram o pH e a capacidade de troca de cátions, e à adsorção de chumbo foram o pH e os níveis de óxidos de ferro e de alumínio.
Resumo:
Este trabalho foi desenvolvido com o objetivo de avaliar a eficácia e o pH de caldas de glifosato após a adição de fertilizantes nitrogenados e utilização de pulverizador pressurizado por CO2. Em campo, foram aplicadas duas doses de glifosato (360 e 720 g ha-1), isoladas ou combinadas a duas concentrações de ureia (2,5 e 5,0 g L-1) ou sulfato de amônio (7,5 e 15,0 g L-1). Em laboratório, mensurou-se o pH de caldas de glifosato após o uso de diferentes concentrações do produto e dos fertilizantes nitrogenados e após a utilização do pulverizador pressurizado por CO2. Em todas as avaliações do experimento em campo, a menor dose de glifosato teve maior eficácia biológica após a adição de sulfato de amônio (15 g L-1) à calda. A ureia (5 g L-1) proporcionou efeitos benéficos somente na avaliação aos 28 dias após a aplicação. Em laboratório, o aumento da concentração de glifosato promoveu gradativa acidificação da calda de pulverização, com estabilização do pH da solução em 4,5. O sulfato de amônio causou pequena acidificação da calda herbicida, enquanto a ureia não alterou o pH. O uso do pulverizador pressurizado por CO2 pouco alterou o pH da calda de glifosato. A maior eficácia do glifosato após a adição de fertilizantes nitrogenados à calda está pouco relacionada com alterações no pH da solução.
Resumo:
Objectives: To compare upper lip frenulum reinsertion, bleeding, surgical time and surgical wound healing in frenectomies performed with the CO2 laser versus the Er, Cr:YSGG laser. Study design: A prospective study was carried out on 50 randomized pediatric patients who underwent rhomboidal resection of the upper lip frenulum with either the CO2 laser or the Er,Cr:YSGG laser. Twenty-five patients were assigned to each laser system. All patients were examined at 7, 14, 21 days and 4 months after the operation in order to assess the surgical wound healing. Results: Insertion of the frenulum, which was preoperatively located between the upper central incisors, migrated to the mucogingival junction as a result of using both laser systems in all patients. Only two patients required a single dose of 650 mg of paracetamol, one of either study group. CO2 laser registered improved intraoperative bleeding control results and shorter surgical times. On the other hand, the Er,Cr:YSGG laser achieved faster healing. Conclusions: Upper lip laser frenectomy is a simple technique that results in minimum or no postoperative swelling or pain, and which involves upper lip frenulum reinsertion at the mucogingival junction. The CO2 laser offers a bloodless field and shorter surgical times compared with the Er,Cr:YSGG laser. On the other hand, the Er,Cr:YSGG laser achieved faster wound healing.
Resumo:
The present study is the first to examine the effect of high-altitude acclimatization and reexposure on the responses of cerebral blood flow and ventilation to CO2. We also compared the steady-state estimates of these parameters during acclimatization with the modified rebreathing method. We assessed changes in steady-state responses of middle cerebral artery velocity (MCAv), cerebrovascular conductance index (CVCi), and ventilation (V(E)) to varied levels of CO2 in 21 lowlanders (9 women; 21 ± 1 years of age) at sea level (SL), during initial exposure to 5,260 m (ALT1), after 16 days of acclimatization (ALT16), and upon reexposure to altitude following either 7 (POST7) or 21 days (POST21) at low altitude (1,525 m). In the nonacclimatized state (ALT1), MCAv and V(E) responses to CO2 were elevated compared with those at SL (by 79 ± 75% and 14.8 ± 12.3 l/min, respectively; P = 0.004 and P = 0.011). Acclimatization at ALT16 further elevated both MCAv and Ve responses to CO2 compared with ALT1 (by 89 ± 70% and 48.3 ± 32.0 l/min, respectively; P < 0.001). The acclimatization gained for V(E) responses to CO2 at ALT16 was retained by 38% upon reexposure to altitude at POST7 (P = 0.004 vs. ALT1), whereas no retention was observed for the MCAv responses (P > 0.05). We found good agreement between steady-state and modified rebreathing estimates of MCAv and V(E) responses to CO2 across all three time points (P < 0.001, pooled data). Regardless of the method of assessment, altitude acclimatization elevates both the cerebrovascular and ventilatory responsiveness to CO2. Our data further demonstrate that this enhanced ventilatory CO2 response is partly retained after 7 days at low altitude.
Resumo:
With the aim of understanding the mechanisms that control the metamorphic transition from the CH4- to the H2O-(CO2)-dominated fluid zone in the Helvetic domain of the Central Alps of Switzerland, fluid inclusions in quartz, illite ``crystallinity'' index, vitrinite reflectance, and the stable isotope compositions of vein and whole rock minerals and fluids trapped in quartz were investigated along four cross-sections. Increasing temperature during prograde metamorphism led to the formation of dry gas by hydrocarbon cracking in the CH4-zone. Fluid immiscibility in the H2O-CH4-(CO2)-NaCl system resulted in cogenetic, CH4- and H2O-dominated fluid inclusions. In the CH4-zone, fluids were trapped at temperatures <= 270 +/- 5 degrees C. The end of the CH4-zone is markedby a sudden increase of CO2 content in the gas phase of fluid inclusions. At temperatures > 270 +/- 5 degrees C, in the H2O-zone, the total amount of volatiles within the fluid decreased below 1 mol% with no immiscibility. This resulted m total homogenization temperatures of H2O-(CO2-CH4)-NaCl inclusions below 180 degrees C. Hydrogen isotope compositions of methane in fluid inclusion have delta D values of less than -100 parts per thousand in the CH4-zone, typical for an origin through cracking of higher hydrocarbons, but where the methane has not equilibrated with the pore water. delta D values of fluid inclusion water are around -40 parts per thousand., in isotopic equilibrium with phyllosilicates of the whole rocks. Within the CH4 to H2O(CO2) transition zone, delta D(H2O) values in fluid inclusions decrease to -130 parts per thousand interpreted to reflect the contribution of deuterium depleted water from methane oxidation. In the H2O-zone, delta D(H2O) values increase again towards an average of -30 parts per thousand which is again consistent with isotopic equilibrium with host-rock phyllosilicates. delta C-13 values of methane in fluid inclusions from the CH4-zone are around -27 parts per thousand in isotopic equilibrium with calcite in veins and whole rocks. The delta C-13(CH4) values decrease to less than -35 parts per thousand at the transition to the H2O-zone and are no longer in equilibrium with the carbonates in the whole rocks. delta C-13 values of CO, are variable but too low to be in equilibrium with the wall rock fluids, compatible with a contribution of CO2 from closed system oxidation of methane. Differences in isotopic composition between host-rock and Alpine fissure carbonate are generally small, suggesting that the amount of CO2 produced by oxidation of methane was small compared to the C-budget in the rocks and local pore fluids were buffered by the wall rocks during precipitation of calcite within the fissures. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
The objective of this work was to evaluate a generalized response function to the atmospheric CO2 concentration [f(CO2)] by the radiation use efficiency (RUE) in rice. Experimental data on RUE at different CO2 concentrations were collected from rice trials performed in several locations around the world. RUE data were then normalized, so that all RUE at current CO2 concentration were equal to 1. The response function was obtained by fitting normalized RUE versus CO2 concentration to a Morgan-Mercer-Flodin (MMF) function, and by using Marquardt's method to estimate the model coefficients. Goodness of fit was measured by the standard deviation of the estimated coefficients, the coefficient of determination (R²), and the root mean square error (RMSE). The f(CO2) describes a nonlinear sigmoidal response of RUE in rice, in function of the atmospheric CO2 concentration, which has an ecophysiological background, and, therefore, renders a robust function that can be easily coupled to rice simulation models, besides covering the range of CO2 emissions for the next generation of climate scenarios for the 21st century.
Resumo:
The chemical and isotopic composition of fumarolic gases emitted from Nisyros Volcano, Greece, and of a single gas sample from Vesuvio, Italy, was investigated in order to determine the origin of methane (CH,) within two subduction-related magmatic-hydrothermal environments. Apparent temperatures derived from carbon isotope partitioning between CH4 and CO2 of around 340degreesC for Nisyros and 470degreesC for Vesuvio correlate well with aquifer temperatures as measured directly and/or inferred from compositional data using the H2O-H-2-CO2-CO-CH4 geothermometer. Thermodynamic modeling reveals chemical equilibrium between CH4, CO2 and H2O implying that carbon isotope partitioning between CO2 and CH, in both systems is controlled by aquifer temperature. N-2/(3) He and CH4/(3) He ratios of Nisyros fumarolic gases are unusually low for subduction zone gases and correspond to those of midoceanic ridge environments. Accordingly, CH4 may have been primarily generated through the reduction of CO, by H, in the absence of any organic matter following a Fischer-Tropsch-type reaction. However, primary occurrence of minor amounts of thermogenic CH4 and subsequent re-equilibration with co-existing CO2 cannot be ruled out entirely- CO2/He-3 ratios and delta(13)C(CO2) values imply that the evolved CO2 either derives from a metasomatized mantle or is a mixture between two components, one outgassing from an unaltered mantle and the other released by thermal breakdown of marine carbonates. The latter may contain traces of organic matter possibly decomposing to CH4 during thermometamorphism. Copyright (C) 2004 Elsevier Ltd.
Resumo:
A conductometric micromethod combined with image analysis system has been developed allowing to determine the CO2 production within 'two-dimensional' tissues, i.e., flat and thin cell layers or epithelial sheets. The preparation was mounted into an airtight chamber separated in two compartments by a thin silicone membrane permeable to gases. The lower compartment contained the nutritive medium and the preparation. The upper compartment and a conductivity measuring capillary connected in series were perfused with a solution of Ba(OH)2. The CO2 produced by the tissue precipitated as BaCO3 and the resulting decrease of electrical conductivity was linearly related to the total CO2 production. In addition, the pattern of CO2 production was directly observable as the BaCO3 crystals formed upon the silicone membrane over the regions which produced CO2. The spatial distribution of the crystals was quantified by video image processing and the regional CO2 production evaluated with a spatial resolution of 100 microns. This new microtechnique was originally developed to study the CO2 production in the early chick blastoderm which is a disc 1-5 cells thick. At the stage of young neurula the CO2 production was found to be 235 +/- 37 nmol.h-1 (mean +/- SD; n = 10) per blastoderm and large variations of local CO2 production were detected from one region to another (from 0.6 to 6.5 nmol.h-1.mm-2). These results indicate a high metabolic and functional differentiation of cells within the blastoderm. The possible applications and improvements of such a microtechnique are discussed.