Electronic structure of a neutral oxygen vacancy in SrTiO3

The electronic structure of an isolated oxygen vacancy in SrTiO3 has been investigated with a variety of ab initio quantum mechanical approaches. In particular we compared pure density functional theory (DFT) approaches with the Hartree-Fock method, and with hybrid methods where the exchange term is treated in a mixed way. Both local cluster models and periodic calculations with large supercells containing up to 80 atoms have been performed. Both diamagnetic (singlet state) and paramagnetic (triplet state) solutions have been considered. We found that the formation of an O vacancy is accompanied by the transfer of two electrons to the 3d(z2) orbitals of the two Ti atoms along the Ti-Vac-Ti axis. The two electrons are spin coupled and the ground state is diamagnetic. New states associated with the defect center appear in the gap just below the conduction band edge. The formation energy computed with respect to an isolated oxygen atom in the triplet state is 9.4 eV.

Electronic structure calculations of small AI_n (n = 2 - 8) clusters

The electronic states of small AI_n (n = 2 - 8) clusters have been calculated with a relativistic ab-initio MOLCAO Dirac-Fock-Slater method using numerical atomic DFS wave-functions. The excitation energies were obtained from a ground state calculation of neutral clusters, and in addition from negative clusters charged by half an electron in order to account for part of the relaxation. These energies are compared with experimental photoelectron spectra.

Inclusive probability calculations for the K-vacancy transfer in collisions of S{^15+} on Ar

Using the single-particle amplitudes from a 20-level coupled-channel calculation with ab initio relativistic self consistent LCAO-MO Dirac-Fock-Slater energy eigenvalues and matrix elements we calculate within the frame of the inclusive probability formalism impact-parameter-dependent K-hole transfer probabilities. As an example we show results for the heavy asymmetric collision system S{^15+} on Ar for impact energies from 4.7 to 16 MeV. The inclusive probability formalism which reinstates the many-particle aspect of the collision system permits a qualitative and quantitative agreement with the experiment which is not achieved by the single-particle picture.

Funcions densitat i semblança molecular quàntica: nous desenvolupaments i aplicacions

La present tesi, tot i que emmarcada dins de la teoria de les Mesures Semblança Molecular Quántica (MQSM), es deriva en tres àmbits clarament definits: - La creació de Contorns Moleculars de IsoDensitat Electrònica (MIDCOs, de l'anglès Molecular IsoDensity COntours) a partir de densitats electròniques ajustades. - El desenvolupament d'un mètode de sobreposició molecular, alternatiu a la regla de la màxima semblança. - Relacions Quantitatives Estructura-Activitat (QSAR, de l'anglès Quantitative Structure-Activity Relationships). L'objectiu en el camp dels MIDCOs és l'aplicació de funcions densitat ajustades, ideades inicialment per a abaratir els càlculs de MQSM, per a l'obtenció de MIDCOs. Així, es realitza un estudi gràfic comparatiu entre diferents funcions densitat ajustades a diferents bases amb densitats obtingudes de càlculs duts a terme a nivells ab initio. D'aquesta manera, l'analogia visual entre les funcions ajustades i les ab initio obtinguda en el ventall de representacions de densitat obtingudes, i juntament amb els valors de les mesures de semblança obtinguts prèviament, totalment comparables, fonamenta l'ús d'aquestes funcions ajustades. Més enllà del propòsit inicial, es van realitzar dos estudis complementaris a la simple representació de densitats, i són l'anàlisi de curvatura i l'extensió a macromolècules. La primera observació correspon a comprovar no només la semblança dels MIDCOs, sinó la coherència del seu comportament a nivell de curvatura, podent-se així observar punts d'inflexió en la representació de densitats i veure gràficament aquelles zones on la densitat és còncava o convexa. Aquest primer estudi revela que tant les densitats ajustades com les calculades a nivell ab initio es comporten de manera totalment anàloga. En la segona part d'aquest treball es va poder estendre el mètode a molècules més grans, de fins uns 2500 àtoms. Finalment, s'aplica part de la filosofia del MEDLA. Sabent que la densitat electrònica decau ràpidament al allunyar-se dels nuclis, el càlcul d'aquesta pot ser obviat a distàncies grans d'aquests. D'aquesta manera es va proposar particionar l'espai, i calcular tan sols les funcions ajustades de cada àtom tan sols en una regió petita, envoltant l'àtom en qüestió. Duent a terme aquest procés, es disminueix el temps de càlcul i el procés esdevé lineal amb nombre d'àtoms presents en la molècula tractada. En el tema dedicat a la sobreposició molecular es tracta la creació d'un algorisme, així com la seva implementació en forma de programa, batejat Topo-Geometrical Superposition Algorithm (TGSA), d'un mètode que proporcionés aquells alineaments que coincideixen amb la intuïció química. El resultat és un programa informàtic, codificat en Fortran 90, el qual alinea les molècules per parelles considerant tan sols nombres i distàncies atòmiques. La total absència de paràmetres teòrics permet desenvolupar un mètode de sobreposició molecular general, que proporcioni una sobreposició intuïtiva, i també de forma rellevant, de manera ràpida i amb poca intervenció de l'usuari. L'ús màxim del TGSA s'ha dedicat a calcular semblances per al seu ús posterior en QSAR, les quals majoritàriament no corresponen al valor que s'obtindria d'emprar la regla de la màxima semblança, sobretot si hi ha àtoms pesats en joc. Finalment, en l'últim tema, dedicat a la Semblança Quàntica en el marc del QSAR, es tracten tres aspectes diferents: - Ús de matrius de semblança. Aquí intervé l'anomenada matriu de semblança, calculada a partir de les semblances per parelles d'entre un conjunt de molècules. Aquesta matriu és emprada posteriorment, degudament tractada, com a font de descriptors moleculars per a estudis QSAR. Dins d'aquest àmbit s'han fet diversos estudis de correlació d'interès farmacològic, toxicològic, així com de diverses propietats físiques. - Aplicació de l'energia d'interacció electró-electró, assimilat com a una forma d'autosemblança. Aquesta modesta contribució consisteix breument en prendre el valor d'aquesta magnitud, i per analogia amb la notació de l'autosemblança molecular quàntica, assimilar-la com a cas particular de d'aquesta mesura. Aquesta energia d'interacció s'obté fàcilment a partir de programari mecanoquàntic, i esdevé ideal per a fer un primer estudi preliminar de correlació, on s'utilitza aquesta magnitud com a únic descriptor. - Càlcul d'autosemblances, on la densitat ha estat modificada per a augmentar el paper d'un substituent. Treballs previs amb densitats de fragments, tot i donar molt bons resultats, manquen de cert rigor conceptual en aïllar un fragment, suposadament responsable de l'activitat molecular, de la totalitat de l'estructura molecular, tot i que les densitats associades a aquest fragment ja difereixen degut a pertànyer a esquelets amb diferents substitucions. Un procediment per a omplir aquest buit que deixa la simple separació del fragment, considerant així la totalitat de la molècula (calcular-ne l'autosemblança), però evitant al mateix temps valors d'autosemblança no desitjats provocats per àtoms pesats, és l'ús de densitats de Forats de fermi, els quals es troben definits al voltant del fragment d'interès. Aquest procediment modifica la densitat de manera que es troba majoritàriament concentrada a la regió d'interès, però alhora permet obtenir una funció densitat, la qual es comporta matemàticament igual que la densitat electrònica regular, podent-se així incorporar dins del marc de la semblança molecular. Les autosemblances calculades amb aquesta metodologia han portat a bones correlacions amb àcids aromàtics substituïts, podent així donar una explicació al seu comportament. Des d'un altre punt de vista, també s'han fet contribucions conceptuals. S'ha implementat una nova mesura de semblança, la d'energia cinètica, la qual consisteix en prendre la recentment desenvolupada funció densitat d'energia cinètica, la qual al comportar-se matemàticament igual a les densitats electròniques regulars, s'ha incorporat en el marc de la semblança. A partir d'aquesta mesura s'han obtingut models QSAR satisfactoris per diferents conjunts moleculars. Dins de l'aspecte del tractament de les matrius de semblança s'ha implementat l'anomenada transformació estocàstica com a alternativa a l'ús de l'índex Carbó. Aquesta transformació de la matriu de semblança permet obtenir una nova matriu no simètrica, la qual pot ser posteriorment tractada per a construir models QSAR.

Systematic studies on 3d-3d and 3d-4f multimetallic complexes with interesting magnetic and/or luminescent properties

324 p.

Vibrational energy levels of water

Several quartic force fields and a full sextic anharmonic force field for H,O have been determined from high-quality ab initio calculations, the highest at the aug-cc-pVQZ CCSD(T) level of theory. These force fields have been used to determine vibrational excited state band origins up to 15 000 cm - ’ above the zero-point level, using both a perturbation-resonancea pproach and a variational approach. An optimisedq uartic force field hasb eeno btained by least squares refinement of our best ab initio results to fit the observed overtone levels of 5 symmetrically substituted isotopomers of water (Hi60, Hi70, HisO, D,O, and T,O) with an rms error of less than 10 cm-‘, using the perturbation-resonancem odel for the vibrational calculation. Predicatel east squaresr efinement was usedt o provide a loose constraint of the refined force field to the ab initio results. The results obtained prove the viability of the perturbation-resonancem odel for usei n larger molecular systemsa nd also highlight someo f its weaknesse

Molecular structures of trimethylchlorogermane, (CH3)(3)GeCl, and trimethylbromogermane, (CH3)(3)GeBr, obtained by gas-phase electron diffraction and theoretical calculations

The structures of trimethylchlorogermane ((CH3)(3)GeCl) and trimethylbromogermane ((CH3)(3)GeBr) have been determined by gas-phase electron diffraction (GED), augmented by the results from ab initio calculations employing second-order Moller-Plesset (MP2) level of theory and the 6-311+G(d) basis set. All the electrons were included in the correlation calculation. The results from the ab initio calculations indicated that these molecules have C-3v symmetry, and models with this symmetry were used in the electron diffraction analysis. The results for the principal distances (r(g)) and angles (angle(alpha)) from the combined GED/ab initio study of trimethylchlorogermane (with estimated 2sigma uncertainties) are: r(Ge-C) = 1.950(4) Angstrom, r(Ge-Cl) = 2.173(4) Angstrom, r(C-H) = 1.090(9) Angstrom, angleCGeC = 112.7(7)degrees, angleCGeCl = 106.0(8)degrees, angleGeCH = 107.8(12)degrees. The results for the principal distances (r(g)) and angles (angle(alpha)) from the combined GED/ab initio study of trimethylbromogermane (with estimated 2sigma uncertainties) are: r(Ge-C) = 1.952(7) Angstrom, r(Ge-Br) = 2.325(4) Angstrom, r(C-H) = 1. 140(28) Angstrom, angleCGeC = 114.2(11)degrees, angleCGeBr = 104.2(13)degrees, angleGeCH 106.9(43)degrees. Local C-3v symmetry and staggered conformation were assumed for the methyl groups.

The vibrational spectrum and ultimate modulus of polyethylene

We have performed the first completely ab initio lattice dynamics calculation of the full orthorhombic cell of polyethylene using periodic density functional theory in the local density approximation (LDA) and the generalized gradient approximation (GGA). Contrary to current perceptions, we show that LDA accurately describes the structure whereas GGA fails. We emphasize that there is no parametrization of the results. We then rigorously tested our calculation by computing the phonon dispersion curves across the entire Brillouin zone and comparing them to the vibrational spectra, in particular the inelastic neutron scattering (INS) spectra, of polyethylene (both polycrystalline and aligned) and perdeuteriopolyethylene. The F-point frequencies (where the infrared and Raman active modes occur) are in good agreement with the latest low temperature data. The near-perfect reproduction of the INS spectra, gives confidence in the results and allows Lis to deduce a number of physical properties including the elastic moduli, parallel and perpendicular to the chain. We find that the Young's modulus for an infinitely long, perfectly crystalline polyethylene is 360.2 GPa at 0 K. The highest experimental value is 324 GPa, indicating that current high modulus fibers are similar to 90% of their maximum possible strength.

An investigation of the germylene addition reaction, GeH2+C2H2: Time-resolved gas-phase kinetic studies and quantum chemical calculations of the reaction energy surface

Time resolved studies of germylene, GeH2, generated by laser flash photolysis of 3,4-dimethylgermacyclopentene-3, have been carried out to obtain rate constants for its bimolecular reaction with acetylene, C2H2. The reaction was studied in the gas-phase over the pressure range 1-100 Tort, with SF6 as bath gas, at 5 temperatures in the range 297-553 K. The reaction showed a very slight pressure dependence at higher temperatures. The high pressure rate constants (obtained by extrapolation at the three higher temperatures) gave the Arrhenius equation: log(k(infinity)/cm(3) molecule(-1) s(-1)) (-10.94 +/- 0.05) + (6.10 +/- 0.36 kJ mol(-1))/RTln10. These Arrhenius parameters are consistent with a fast reaction occurring at approximately 30% of the collision rate at 298 K. Quantum chemical calculations (both DFT and ab initio G2//B3LYP and G2//QCISD) of the GeC2H4 potential energy surface (PES), show that GeH2 + C2H2 react initially to form germirene which can isomerise to vinylgermylene with a relatively low barrier. RRKM modelling, based on a loose association transition state, but assuming vinylgermylene is the end product (used in combination with a weak collisional deactivation model) predicts a strong pressure dependence using the calculated energies, in conflict with the experimental evidence. The detailed GeC2H4 PES shows considerable complexity with ten other accessible stable minima (B3LYP level), the three most stable of which are all germylenes. Routes through this complex surface were examined in detail. The only product combination which appears capable of satisfying the (P-3) + C2H4.C2H4 was confirmed as a product by GC observed lack of a strong pressure dependence is Ge(P-3) + C2H4. C2H4 was confirmed as a product by GC analysis. Although the formation of these products are shown to be possible by singlet-triplet curve crossing during dissociation of 1-germiranylidene (1-germacyclopropylidene), it seems more likely (on thermochernical grounds) that the triplet biradical, (GeCH2CH2.)-Ge-., is the immediate product precursor. Comparisons are made with the reaction of SiH2 with C2H2.

Gas phase kinetic and quantum chemical studies of the reactions of silylene with the methylsilanes. Absolute rate constants, temperature dependences, RRKM modelling and potential energy surfaces

Time resolved studies of silylene, SiH2, generated by the 193 nm laser. ash photolysis of phenylsilane, have been carried out to obtain rate coefficients for its bimolecular reactions with methyl-, dimethyl- and trimethyl-silanes in the gas phase. The reactions were studied over the pressure range 3 - 100 Torr with SF6 as bath gas and at five temperatures in the range 300 - 625 K. Only slight pressure dependences were found for SiH2 + MeSiH3 ( 485 and 602 K) and for SiH2 + Me2SiH2 ( 600 K). The high pressure rate constants gave the following Arrhenius parameters: [GRAPHICS] These are consistent with fast, near to collision-controlled, association processes. RRKM modelling calculations are consistent with the observed pressure dependences ( and also the lack of them for SiH2 + Me3SiH). Ab initio calculations at both second order perturbation theory (MP2) and coupled cluster (CCSD(T)) levels, showed the presence of weakly-bound complexes along the reaction pathways. In the case of SiH2 + MeSiH3 two complexes, with different geometries, were obtained consistent with earlier studies of SiH2 + SiH4. These complexes were stabilised by methyl substitution in the substrate silane, but all had exceedingly low barriers to rearrangement to product disilanes. Although methyl groups in the substrate silane enhance the intrinsic SiH2 insertion rates, it is doubtful whether the intermediate complexes have a significant effect on the kinetics. A further calculation on the reaction MeSiH + SiH4 shows that the methyl substitution in the silylene should have a much more significant kinetic effect ( as observed in other studies).

Infrared absorption spectra, radiative efficiencies, and global warming potentials of perfluorocarbons: Comparison between experiment and theory

Experimentally and theoretically determined infrared spectra are reported for a series of straight-chain perfluorocarbons: C2F6, C3F8, C4F10, C5F12, C6F14, and C8F18. Theoretical spectra were determined using both density functional (DFT) and ab initio methods. Radiative efficiencies (REs) were determined using the method of Pinnock et al. (1995) and combined with atmospheric lifetimes from the literature to determine global warming potentials (GWPs). Theoretically determined absorption cross sections were within 10% of experimentally determined values. Despite being much less computationally expensive, DFT calculations were generally found to perform better than ab initio methods. There is a strong wavenumber dependence of radiative forcing in the region of the fundamental C-F vibration, and small differences in wavelength between band positions determined by theory and experiment have a significant impact on the REs. We apply an empirical correction to the theoretical spectra and then test this correction on a number of branched chain and cyclic perfluoroalkanes. We then compute absorption cross sections, REs, and GWPs for an additional set of perfluoroalkenes.

π-dimerization of pleiadiene radical cations at low temperatures revealed by UV–vis spectroelectrochemistry and quantum theory

One-electron oxidation of the non-alternant polycyclic aromatic hydrocarbon pleiadiene and related cyclohepta[ c,d]pyrene and cyclohepta[c,d]fluoranthene in THF produces corresponding radical cations detectable in the temperature range of 293–263 K only on the subsecond time scale of cyclic voltammetry. Although the EPR-active red-coloured pleiadiene radical cation is stable according to the literature in concentrated sulfuric acid, spectroelectrochemical measurements reported in this study provide convincing evidence for its facile conversion into the green-coloured, formally closed shell and, hence, EPRsilent π-bound dimer dication stable in THF at 253 K. The unexpected formation of the thermally unstable dimeric product featuring a characteristic intense low-energy absorption band at 673 nm (1.84 eV; logεmax=4.0) is substantiated by ab initio calculations on the parent pleiadiene molecule and the PF6 − salts of the corresponding radical cation and dimer dication. The latter is stabilized with respect to the radical cation by 14.40 kcal mol−1 (DFT B3LYP) [37.64 kcal mol−1 (CASPT2/DFT B3LYP)]. An excellent match has been obtained between the experimental and TDDFT- calculated UV–vis spectra of the PF6 − salt of the pleiadiene dimer dication, considering solvent (THF) effects.

Time-resolved gas-phase kinetic, quantum chemical, and RRKM studies of reactions of silylene with alcohols

Time-resolved kinetic studies of silylene, SiH2, generated by laser flash photolysis of 1-silacyclopent-3-ene and phenylsilane, have been carried out to obtain rate constants for its bimolecular reactions with methanol, ethanol, 1-propanol, 1-butanol and 2-methyl-1-butanol. The reactions were studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas, at room temperature. In the study with methanol several buffer gases were used. All five reactions showed pressure dependences characteristic of third body assisted association reactions. The rate constant pressure dependences were modelled using RRKM theory, based on Eo values of the association complexes obtained by ab initio calculation (G3 level). Transition state models were adjusted to fit experimental fall-off curves and extrapolated to obtain k∞ values in the range 1.9 to 4.5 × 10-10 cm3 molecule-1 s-1. These numbers, corresponding to the true bimolecular rate constants, indicate efficiencies of between 16 and 67% of the collision rates for these reactions. In the reaction of SiH2 + MeOH there is a small kinetic component to the rate which is second order in MeOH (at low total pressures). This suggests an additional catalysed reaction pathway, which is supported by the ab initio calculations. These calculations have been used to define specific MeOH-for-H2O substitution effects on this catalytic pathway. Where possible our experimental and theoretical results are compared with those of previous studies.

Dimer formation by symbiotic donor–acceptor interaction between two molecules of a specially designed dioxomolybdenum(VI) complex containing both donor and acceptor centers – A structural, spectroscopic and DFT study

This work presents a model study for the formation of a dimeric dioxomolybdenum(VI) complex [MoO2L]2, generated by simultaneous satisfaction of acceptor and donor character existing in the corresponding monomeric Mo(VI) complex MoO2L. This mononuclear complex is specially designed to contain a coordinatively unsaturated Mo(VI) acceptor centre and a free donor group, (e.g. –NH2 group) strategically placed in the ligand skeleton [H2L = 2-hydroxyacetophenonehydrazone of 2-aminobenzoylhydrazine]. Apart from the dimer [MoO2L]2, complexes of the type MoO2L·B (where B = CH3OH, γ-picoline and imidazole) are also reported. All the complexes are characterized by elemental analysis, spectroscopic (UV–Vis, IR, 1H NMR) techniques and cyclic voltammetry. Single crystal X-ray structures of [MoO2L]2 (1), MoO2L·CH3OH (2), and MoO2L.(γ-pic) (3) have been determined and discussed. DFT calculation on these complexes corroborates experimental data and provides clue for the facile formation of this type of dimer not reported previously. The process of dimer formation may also be viewed as an interaction between two molecules of a specially designed complex acting as a monodentate ligand. This work is expected to open up a new field of design and synthesis of dimeric complexes through the process of symbiotic donor–acceptor (acid–base) interaction between two molecules of a specially designed monomer.

CASPT2 Study of the Potential Energy Surface of the HSO(2) System

The importance of the HSO(2) system in atmospheric and combustion chemistry has motivated several works dedicated to the study of associated structures and chemical reactions. Nevertheless controversy still exists in connection with the reaction SH + O(2) -> H + SO(2) and also related to the role of the HSOO isomers in the potential energy surface (PES). Here we report high-level ab initio calculation for the electronic ground state of the HSO(2) system. Energetic, geometric, and frequency properties for the major stationary states of the PES are reported at the same level of calculations:,CASPT2/aug-cc-pV(T+d)Z. This study introduces three new stationary points (two saddle points and one minimum). These structures allow the connection of the skewed HSOOs and the HSO(2) minima defining new reaction paths for SH + O(2) -> H + SO(2) and SH + O(2) -> OH + SO. In addition, the location of the HSOO isomers in the reaction pathways have been clarified.