Proposta metodológica para o imageamento digital e modelagem virtual 3d de um bloco de rochas travertinas

In this paper we present the methodological procedures involved in the digital imaging in mesoscale of a block of travertines rock of quaternary age, originating from the city of Acquasanta, located in the Apennines, Italy. This rocky block, called T-Block, was stored in the courtyard of the Laboratório Experimental Petróleo "Kelsen Valente" (LabPetro), of Universidade Estadual de Campinas (UNICAMP), so that from it were performed Scientific studies, mainly for research groups universities and research centers working in brazilian areas of reservoir characterization and 3D digital imaging. The purpose of this work is the development of a Model Solid Digital, from the use of non-invasive techniques of digital 3D imaging of internal and external surfaces of the T-Block. For the imaging of the external surfaces technology has been used LIDAR (Light Detection and Range) and the imaging surface Interior was done using Ground Penetrating Radar (GPR), moreover, profiles were obtained with a Gamma Ray Gamae-spectômetro laptop. The goal of 3D digital imaging involved the identification and parameterization of surface geological and sedimentary facies that could represent heterogeneities depositional mesoscale, based on study of a block rocky with dimensions of approximately 1.60 m x 1.60 m x 2.70 m. The data acquired by means of terrestrial laser scanner made available georeferenced spatial information of the surface of the block (X, Y, Z), and varying the intensity values of the return laser beam and high resolution RGB data (3 mm x 3 mm), total points acquired 28,505,106. This information was used as an aid in the interpretation of radargrams and are ready to be displayed in rooms virtual reality. With the GPR was obtained 15 profiles of 2.3 m and 2 3D grids, each with 24 sections horizontal of 1.3 and 14 m vertical sections of 2.3 m, both the Antenna 900 MHz to about 2600 MHz antenna. Finally, the use of GPR associated with Laser Scanner enabled the identification and 3D mapping of 3 different radarfácies which were correlated with three sedimentary facies as had been defined at the outset. The 6 profiles showed gamma a low amplitude variation in the values of radioactivity. This is likely due to the fact of the sedimentary layers profiled have the same mineralogical composition, being composed by carbonate sediments, with no clay in siliciclastic pellitic layers or other mineral carrier elements radioactive

3D reconstruction and scanning electron microscopy of salivary glands of the millipede Rhinocricus padbergi (Verhoef, 1938) (Diplopoda: Spirobolida)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modal analysis of anisotropic diffused-channel waveguide by a scalar finite element method

A procedure to model optical diffused-channel waveguides is presented in this work. The dielectric waveguides present anisotropic refractive indexes which are calculated from the proton concentration. The proton concentration inside the channel is calculated by the anisotropic 2D-linear diffusion equation and converted to the refractive indexes using mathematical relations obtained from experimental data, the arbitrary refractive index profile is modeled by a. nodal expansion in the base functions. The TE and TM-like propagation properties (effective index) and the electromagnetic fields for well-annealed proton-exchanged (APE) LiNbO3 waveguides are computed by the finite element method.

Search for pair production of second generation scalar leptoquarks in p(p)over-bar collisions at root s-=1.96 TeV

We report on a search for the pair production of second generation scalar leptoquarks (LQ(2)) in p (p) over bar collisions at the center-of-mass energy, root s = 1.96 TeV, using data corresponding to an integrated luminosity of 294 19 pb(-1) recorded with the DO detector. No evidence for a leptoquark signal in the LQ(2)LQ(2) -> mu q mu q channel has been observed, and upper bounds on the product of cross section times branching fraction were set. This yields lower mass limits of m(LQ2) > 247 GeV/c(2) for beta = B(LQ(2) -> mu q) = 1 and m(LQ2) > 182 GeV/c(2) for beta = 1/2. Combining these limits with previous DO results, the lower limits on the mass of a second generation scalar leptoquark are m(LQ2) > 251 GeV/c(2) and m(LQ2) > 204 GeV/c(2) for beta = I and beta = 1/2, respectively. (c) 2006 Elsevier B.V. All rights reserved.

Investigation of the H tau tau and Hbb coupling constants for a scalar (Pseudoscalar) higgs Boson at a future linear electron-positron collider

The possibility of setting constraints on the Couplings of a scalar (pseudoscalar) Higgs boson to the tau lepton and the b quark in the reactions e(+)e(-)-->v (v) over bar tau(+)tau(-) and e(+)e(-)-->v (v) over barb (b) over bar at a future linear electron-positron collider of total energy roots = 500 GeV is studied. The admixture of a new hypothetical pseudoscalar state of the Higgs boson in the Hf (f) over bar vertex is parametrized in the form (mf/v)(a+igamma(5)b). on the basis of an analysis of differential distributions for the processes under study, it is shown that data from the future linear collider TESLA will make it possible to constrain the parameters a and b as -0.32 less than or equal to Deltaa less than or equal to 0.24 and -0.73 less than or equal to b less than or equal to 0.73 in the case of the reaction e(+)e(-)-->v (v) over bar tau(+)tau(-) and as -0.026 less than or equal to Deltaa less than or equal to 0.027 and -0.23 less than or equal to b less than or equal to 0.23 in the case of the reaction e(+)e(-) --> v (v) over barb (b) over bar. It is emphasized that the contribution of the fusion Subprocess WW --> H in the channel involving an electron neutrino is of particular importance, since this contribution enhances the sensitivity of data to the parameters being analyzed. (C) 2004 MAIK Nauka/Inierperiodica.

Search for pair production of scalar bottom quarks in p(p)over-bar collisions at root s = 1.96 TeV

A search for direct production of scalar bottom quarks ((b) over bar) is performed with 310 pb(-1) of data collected by the D0 experiment in p (p) over bar collisions at root s = 1.96 TeV at the Fermilab Tevatron Collider. The topology analyzed consists of two b jets and an imbalance in transverse momentum due to undetected neutralinos (chi(0)(1)), with chi(0)(1) assumed to be the lightest supersymmetric particle. We find the data consistent with standard model expectations, and set a 95% C.L. exclusion domain in the (m(b), m(chi 1)(0)) mass plane, improving significantly upon the results from run I of the Tevatron.

Search for the pair production of scalar top quarks in the acoplanar charm jet final state in p(p)over-bar collisions at root s=1.96 TeV

A search for the pair production of scalar top quarks, (t) over tilde, has been performed in 360 pb(-1) of data from pp collisions at a center-of-mass energy of 1.96 TeV, collected by the D phi detector at the Fermilab Tevatron collider. The (t) over tilde decay mode considered is (t) over tilde -> c (chi) over tilde (0)(1), where (chi) over tilde (0)(1) is the lightest supersymmetric particle. The topology analyzed therefore consists of a pair of acoplanar heavy-flavor jets with missing transverse energy. The data and standard model expectation are in agreement, anda 95% C.L. exclusion domain in the (m((t) over tilde), m((chi) over tilde1)(0)) plane has been determined, extending the domain excluded by previous experiments. (c) 2006 Elsevier B.V All rights reserved.

Search for the lightest scalar top quark in events with two leptons in p(p)over-bar collisions at root s=1.96 TeV

Data collected by the do detector at a p (p) over bar center-of-mass energy of 1.96 TeV at the Fermilab Tevatron Collider have been used to search for pair production of the lightest supersymmetric partner of the top quark decaying into bl (nu) over tilde. The search is performed in the ll' = e mu and mu mu final states. No evidence for this process has been found in data samples of approximately 400 pb(-1). The domain in the [M((t) over tilde (1)), M((nu) over tilde)] plane excluded at the 95% C.L. is substantially extended by this search. (c) 2007 Elsevier B.V. All rights reserved.

Search for a scalar or vector particle decaying into Z gamma in p(p)over-bar collisions at root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for admixture of scalar top quarks in the t(t)over-bar lepton + jets final state at root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for the lightest scalar top quark in events with two leptons in p(p)over-bar collisions at root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for pair production of second generation scalar leptoquarks

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for scalar top quarks in the acoplanar charm jets and missing transverse energy final state in p(p)over-bar collisions at root s=1.96 TeV

We present a search for the pair production of scalar top quarks, (t) over tilde, using 995 pb(-1) of data collected in p (p) over bar collisions with the Dempty set detector at the Fermilab Tevatron Collider at root s = 1.96 TeV. Both scalar top quarks are assumed to decay into a charm quark and a neutralino ((chi) over tilde (0)(1)), where (chi) over tilde (0)(1) is the lightest supersymmetric particle. This leads to a final state with two acoplanar charm jets and missing transverse energy. We find the yield of such events to be consistent with the standard model expectation, and exclude sets of (t) over tilde and (chi) over tilde (0)(1) masses at the 95% C.L. that substantially extend the domain excluded by previous searches. Published by Elsevier B.V.

Search for pair production of the scalar top quark in muon plus tau final states D0 Collaboration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for first generation scalar leptoquarks in the e nu jj channel in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)