512 resultados para Úlcera da perna
Resumo:
Descriptive study aimed to analyze the quality of life (QOL) of patients with venous ulcers (UV) outpatient clinic of a university hospital in Natal / RN. The aim of the study population was composed of 50 patients with UV treated at the cardiology clinic of a university teaching hospital at the tertiary level. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (Protocol 279/09). Data collection was performed over a period of two months by the very a masters degree and an academic nursing through the application of a form concerning the socio-demographic, clinical, and health care, and the instruments WHOQOL and WHOQOL - old. The data were analyzed with SPSS 15.0, using descriptive and inferential statistics presented in the form of tables, charts and graphs. Of the surveyed, female predominance, age range 59 years, Catholic, low education, married, with up to 03 children, not working, retired, or with occupations requiring long periods in one position, wage income of up to 02 minimum wages, inadequate sleep, patients with chronic venous insufficiency and other chronic diseases such as diabetes and hypertension, were taking medications for treatment, being a minority to IVC. In patients with predominant only one injury, time of injury up to five years, inadequate rest, pain, edema and lesions colonized. The assistance the UV patients began treatment of the injury until four months after the onset of the ulcer, and services primary health care most wanted, access to angiologist by reference form, commuted by public transportation, received support regarding the treatment of injuries. The topical product most used in the lesion was healing, and few were using compression therapy. respondents suffer discrimination in society, showed changes in quality of life after the occurrence of ulcer in relation to leisure, pain, restriction of social / school / transportation; barring employment / financial / social ladder; Physical appearance / discrimination and restriction of domestic activity. These changes were related to the time of injury and found that the more chronic injury is the most negative changes occur in their QV (ρ = 0.000). Analyzing the characteristics of QV measured by the WHOQOL-bref, we found for the two general questions they are dissatisfied with their health (ρ = 0.023) and all areas have significant difference compared with the worst QV have the injury of more than 5 years (ρ = 0.000). The QV measured by the WHOQOL-old, we found that these patients had no changes from the time of injury. We conclude that the QV of patients with UV was considered unsatisfactory when compared to the time of injury on more than 5 years which shows that the quality of life worsens with time the chronic UV.
Resumo:
Venous ulcers are lesions resulting from chronic venous insufficiency, venous valvular abnormalities and venous thrombosis. Its occurrence has been growing with the increase in life expectancy of the world population. Considered as fundamental aspects in the approach to the person with venous ulcer care with the interdisciplinary approach, adoption of protocol-specific knowledge, technical skill, coordination between levels of care complexity of the Health System and active participation of patients and their families, a holistic perspective. The construction of a clinical protocol for people with venous ulcers can help professionals of high complexity services in patient assessment and the establishment of quality care in a systematic way and focused on the factors that interfere with wound healing. Thus, this study aimed to analyze the evidence of validation of a clinical protocol for people with venous ulcers treated at high-complexity services. This is a methodological study with a quantitative approach, developed in three stages: literature review, evidence of content validity and evidence of validation in the clinical context. Approved by the Federal University of Rio Grande do Norte Research Ethics Committee (Opinion: 147.452 and CAAE: 07556312.0.0000.5537). The literature review was conducted in August and September 2012, becoming the basis for the construction of the protocol. Then the evidence of content validity, which included 53 judges (experts) selected by the Lattes platform to evaluate the protocol items was performed. The judges were contacted by e-mail and rated the protocol via Google Docs
Resumo:
The problem facing the incidence of pressure ulcers (UP) in the hospital environment especially in the intensive care unit (ICU), although it is an old and frequent event in our professional practice, it is not notified in the researches as much as it should be. We observed a tendency to invest in therapeutical and in studies about the production of sophisticated new bandages. Few, however, are the investments in research on preventive measures in order to prevent or at least slow down the development of lesions. In this sense, the study aimed to analyze the correlation between nursing care and the risk of developing UP measured by the Braden scale in ICU patients. This is a descriptive study of longitudinal quantitative approach. The project obtained a favourable opinion from the Ethics Committee of HUOL (no 486/10). Data collection was carried out in the Hospital of Unimed in Natal during six months in 2011. The sample was of 32 patients hospitalized in ICU for over four days. The results were processed in SPSS 15.0 for descriptive statistics and inferential statistics. We identified that, only 9.4% of our sample developed UP, being predominantly male, elderly people aged above 60 years, Caucasian, with diagnostic hypothesis at the time of hospitalization of sepsis, were clinical patients, who presented hemodynamic instability, using orotracheal tube (TOT), enteral probe (SNE), vesical probe delay (SVD) and had values of albumin and hemoglobin levels below normal. In addition, these patients had a longer hospital stay, longer usage of TOT, SNE, SVD, increased use of sedation and drain than those who did not develop UP and were all at risk for developing these injuries second Braden scores. 66.7% of the lesions developed were located in the sacral region, limiting the degree I and all patients that developed were considered serious, 100.0% of them have evolved since the death. Small were the differences between the averages of Braden scores between patients with and without UP, 11,9+2,4 against 12,4+2,6 with p = 0.627. The clinical aspects of the patients in the study were instrumental in the development of UP, once, these findings were statistically significant through the Mann-Whitney test, and appropriateness of nursing conduct was decisive for the prevention of pressure ulcers in critical patients, since many were those classified as at risk (28) and few who have developed lesions (03)
Resumo:
The venous ulcer is an epidemiological problem of high prevalence, causing disability and dependence. Assess the tissue impairment level of patients with venous lesions, within a nursing referential, is relevant for the implementation of a directed assistance to specific clientele. Thus, this work aims to characterize the health status regarding the integrity the lower limbs skin of patients with venous ulcers, according to the of tissue integrity outcome indicators from the Nursing Outcomes Classification. A cross-sectional study conducted in a university hospital in Natal - Rio Grande do Norte. The sample consisted of 50 participants, selected through consecutive sampling. Data collection occurred through a interview and physical examination form and a operational definitions tool for indicators of the nursing Tissue Integrity outcome directed to patients with venous ulcer, applied from February to June 2012. Data analysis was done by descriptive statistics and nonparametric tests (Spearman, Kruskal-Wallis and Mann-Whitney tests). The project was approved by the Research Ethics Committee with protocol 608/11 and Presentation Certificate to Ethical Consideration No. 0038.0.294.000-11. The results were presented using three scientific articles derivatives of research. It was found that the indicators show moderate impairment, light and not impaired, as the median. The respondents had an average of 59.72 years, 66% female, 50% were retired, 60% with a partner, 44% had arterial hypertension, 26% allergies, 20% diabetes mellitus, 96% were sedentary, 14% drank alcohol and 6% were smokers. There was a statistically significant correlation of low intensity between age and hydration (p=0.032; rs=-0.304) and skin desquamation (p=0.026; rs=-0.316), family income and necrosis (p=0.012; rs=-0.353); Ankle Brachial Index and tissue perfusion (p=0,044; rs=-0,329); Diabetes Mellitus and texture (p=0.015) and tissue perfusion (p=0.026); allergy and texture (p=0.034), physical activity and hydration (p=0.034), smoking and thickness (p=0.018), and alcohol consumption and exudate (p=0.045). We conclude that the patients had light to moderate impairment, indicating a good state of health on the integrity of the skin of the lower limbs, according to the indicators of the outcome of tissue integrity Classification Nursing Outcomes valued in the present study. It is believed that the evaluation of impairment tissue using a self-nursing system and its relation with socioeconomic, clinical and risk factors are unique tools in the care planning and in the wound healing
Resumo:
To characterize patients according to gender, age category, internment time, diagnostical hypothesis and location of the pressure ulcer; to identify the susceptibility conditions, intrinsical and extrinsical factors present on ICU patients and to verify on the existence of association between the susceptibility conditions and the intrinsecal and extrinsecal factors on the occurrence of PU. Methods: It is a descriptive study, of longitudinal design of the panel type, with quantitative approach, performed on two ICU s of a private hospital located in Natal/RN, with 40 patients interned at these units. The data collection was performed on all three shifts through a structured observation and physical exam of the patients' skin form seeking to identify the presence of PU. Results: The greatest occurence of PU was on individuals of the male gender (70%) when compared to the female gender (30%), that difference being statistically significant (p=0,0267), with the male gender presenting 4,3 times greater chance of developing PU than the female; the predominant age category was from 60 years of age on (85%), 60,0% presented 1 to 2 PU s after 7 (seven) days of permanence in the ICU s, the predominant diagnostical hypothesis on the patients with PU were the respiratory diseases (42,3%) and the most frequent locations of PU were the sacral region (40,0%) and heels (36,0%). 25 PU s of stage I were diagnosed on 50,0% of the followed patients, with general incidence of 50,0% on both ICUs. from the 88 variables researched, 75 were identified on the patients from the study, being the predominant conditions (anemia, hypotension, leukocytosis, other diseases hypertension blood pressure, cardiac insuffience, pneumonia - and ansiolythic), the intrinsecal factors (diminished muscular strenght and/or mass, discrete edema, totally compromised mobile coordination and total inability for movement on the bed) and the extrinsecal factors (inadequate mattress type, permanence on a single position for >2 hours, shearing/friction force, bed clothes with folds that leave marks on the body, pressure force) predominated on patients with PU. The male gender variables (p=0,0267,OR=4,3), sedation (p=0,0006,OR=4,1), psychomotive agitation (p=0,0375,OR=5,8) and leukocytosis (p=0,0285,OR=5,0) presented a significant statistical diference when analyzed independently. We verified an association of 17,3%, statistically significant (p=0,0384), between the susceptibility conditions (anemia, leukocytosis and hypotension), the intrinsecal factors (age equal or above 60 years, diminished/absent pain sensibility and smooth, fine or delicate skin) and the extrinsecal factors (inadequate mattress, pressure forces, shearing/friction force, permanence on a single position for more than 2 hours, elevation between 30 to 45 degrees and inadequate bed clothes' conditions), with a chance ratio of 4,6 times the risk of occurrence of PU on the patients that presented the referred association. Conclusion: The incidence of PU detected on the ICU-interned patients was high and we made evident the existence of association between the susceptibility conditions, the intrinsecal and extrinsecal factors on the occurrence of PU s on the ICUinterned patients, and thus we accept the alternative hypothesis proposed on the study
Composição centesimal da carne de cordeiros submetidos a dietas com diferentes teores de concentrado
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objetivou-se avaliar as características quantitativas da carcaça de bovinos machos não castrados, terminados em confinamento e abatidos aos 13-14 meses de idade. Foram utilizados 16 bezerros com nove meses de idade e peso médio inicial de 220 kg (oito Aberdeen Angus - AA e oito Hereford - HE), submetidos a dois níveis de energia (3,07 e 3,18 Mcal/kg de MS). O desenho experimental foi inteiramente casualizado, em arranjo fatorial 2 x 2 (duas raças e dois níveis de energia). O volumoso utilizado foi a silagem de milho, com 36% de grãos na matéria seca (MS). O concentrado nos tratamentos de menor nível de energia participou com 12% e naqueles de maior nível, com 32% da MS da dieta. Os animais foram abatidos quando, por estimativa, as carcaças apresentaram, na média, um mínimo de 190 kg. Os animais AA apresentaram maior rendimento de carcaça quente (54,95 contra 53,75%), maior comprimento de perna (64,12 contra 62,12 cm) e maior área do músculo Longissimus/100 kg de carcaça (29,31 contra 27,41 cm²). Os animais que receberam o maior nível de energia na dieta apresentaram maior comprimento de perna (71,75 contra 64,50 cm) e melhor conformação da carcaça (11,25 contra 10,12 pontos). Observou-se interação significativa entre raça e nível de energia para a espessura de gordura subcutânea, sendo a maior espessura verificada nas carcaças dos animais HE, que receberam o menor nível de energia.
Resumo:
Com o objetivo de estudar o efeito da restrição alimentar sobre as características da carcaça de caprinos leiteiros, realizou-se um experimento utilizando 27 cabritos castrados da raça Saanen. Os animais (PV inicial de 20 kg) foram distribuídos nos tratamentos alimentação à vontade e 30 e 60% de restrição, sendo abatidos aos 35 kg de PV. Foram avaliados o rendimento comercial e biológico, os cortes comerciais, a área de olho-de-lombo e a composição tecidual da perna. O rendimento biológico não foi afetado pela restrição alimentar, mas o comercial diminuiu com o aumento da restrição. A elevação no nível de restrição alimentar promoveu diminuição do lombo e da 6ª a 13ª costelas e aumento da paleta e do pescoço, proporcionalmente à meia-carcaça. A proporção de ossos aumentou e a de gordura total diminuiu com o aumento da restrição. O tecido muscular não foi afetado pela restrição. A restrição alimentar de até 30% não prejudicou a qualidade da carcaça de caprinos leiteiros.
Resumo:
Objetivando avaliar o desenvolvimento relativo dos componentes do peso vivo (PV), dos cortes comerciais e dos tecidos da carcaça, utilizaram-se 40 cabritos Saanen. Os animais foram abatidos ao atingir 5,0; 12,5; 20,0; 27,5 e 35,0 kg de PV e a carcaça foi seccionada em paleta, pescoço, 1ª a 5ª costelas, 6ª a 13ª costelas, peito/fralda, lombo e perna. A perna foi dissecada em ossos, músculos e gordura. Utilizou-se a equação alométrica Y=aXb para estimar o desenvolvimento relativo. O crescimento do tecido ósseo foi precoce, o do tecido muscular intermediário e o da gordura crescimento tardio, uma vez que a gordura subcutânea é depositada mais tardiamente. Os cortes comerciais apresentaram coeficiente de alometria isogônico, com exceção do corte da 6ª a 13ª costelas e do peito/fralda. O desenvolvimento da carcaça e dos não-componentes da carcaça acompanhou o peso de corpo vazio. Cabritos com 35 kg de PV possuem proporção de músculos e relação músculo:osso adequadas, mas apresentam proporção de gordura maior que a observada nos animais abatidos com 20 kg de PV.
Resumo:
Objetivou-se com este trabalho avaliar o efeito da restrição alimentar nas características de carcaça de cabritos F1 Boer x Saanen. Foram utilizados 21 cabritos, pesando 15 kg de PV, distribuídos em três tratamentos (0, 30 e 60% de restrição). O consumo dos animais do tratamento 0% de restrição determinavam o consumo dos animais dos tratamentos 30 e 60% de restrição. Quando os animais do nível de restrição 0% atingiam 25 kg, estes juntamente com seus pares foram submetidos a jejum de sólido de 24 h e de líquido de 16 h. O abate ocorreu mediante descarga elétrica, seguido de sangria e retirada dos órgãos. Os ganhos de peso foram de 211,03, 126,15 e 11,71g/dia; a eficiência alimentar de 0,20, 0,18 e de 0,03; os pesos de abate de 25,44, 20,91 e 15,82kg para os tratamentos 0, 30 e 60% de restrição, respectivamente. O rendimento de carcaça quente, de carcaça fria e biológico não foram influenciados pela restrição alimentar. Somente a proporção da paleta e a do lombo foram influenciados pela restrição alimentar, com aumento linear do rendimento da paleta e decréscimo linear do rendimento do lombo. Houve efeito da restrição na redução do rendimento de gordura e aumento da proporção de osso. A restrição alimentar em níveis moderados, permitiu a obtenção de carcaças de boa qualidade, com bom rendimento, elevada proporção de músculo e baixa participação de gordura e, dependendo da relação custo:benefício, pode tornar-se boa alternativa para o produtor.
Resumo:
Com o objetivo de avaliar a influência da relação volumoso:concentrado sobre a composição tecidual e os rendimentos de carcaça e de cortes comerciais de cordeiros Morada Nova em confinamento, utilizaram-se 18 cordeiros com peso vivo (PV) inicial de 15 kg, distribuídos em seis grupos de três animais (um em cada dieta), de acordo com a relação volumoso(V):concentrado(C): 40:60, 55:45 e 70:30. Foram avaliados os pesos de corpo vazio (PCV), de carcaça quente (PCQ) e de carcaça fria (PCF), a partir dos quais foram calculados os rendimentos biológico (RB), de carcaça quente (RCQ) e de carcaça fria (RCF) e a perda de peso por resfriamento (PPR). A carcaça foi dividida em cinco cortes cárneos (perna, lombo, costelas, paleta e pescoço), os quais foram pesados para cálculo de seus rendimentos em relação ao peso da meia-carcaça. A perna foi dissecada em músculo, osso e gordura e os pesos desses tecidos foram expressos em peso absoluto e em porcentagem da perna. Calcularam-se as relações músculo:osso e músculo:gordura, o índice de musculosidade da perna (IMP) e a área de olho-de-lombo (AOL). O aumento de 30 para 60% de concentrado na dieta elevou os rendimentos de carcaça quente e carcaça fria, assim como o rendimento biológico. Os crescentes teores de concentrado na dieta não afetaram a porcentagem de músculo na perna, mas proporcionaram maior deposição de gordura e maior área de olho-de-lombo.
Resumo:
The manufacturing of above and below-knee prosthesis starts by taking surfac measurements of the patient s residual limb. This demands the making of a cartridg with appropriate fitting and customized to the profile of each patient. The traditiona process in public hospitals in Brazil begins with the completion of a record file (according to law nº388, of July 28, 1999 by the ministry of the health) for obtaining o the prosthesis, where it is identified the amputation level, equipment type, fitting type material, measures etc. Nowadays, that work is covered by the Brazilian Nationa Health Service (SUS) and is accomplished in a manual way being used commo measuring tapes characterizing a quite rudimentary, handmade work and without an accuracy.In this dissertation it is presented the development of a computer integrate tool that it include CAD theory, for visualization of both above and below-knee prosthesis in 3D (i.e. OrtoCAD), as well as, the design and the construction a low cos electro-mechanic 3D scanner (EMS). This apparatus is capable to automatically obtain geometric information of the stump or of the healthy leg while ensuring smalle uncertainty degree for all measurements. The methodology is based on reverse engineering concepts so that the EMS output is fed into the above mentioned academi CAD software in charge of the 3D computer graphics reconstruction of the residualimb s negative plaster cast or even the healthy leg s mirror image. The obtained results demonstrate that the proposed model is valid, because it allows the structura analysis to be performed based on the requested loads, boundary conditions, material chosen and wall thickness. Furthermore it allows the manufacturing of a prosthesis cartridge meeting high accuracy engineering patterns with consequent improvement in the quality of the overall production process
Resumo:
The manufacture of prostheses for lower limb amputees (transfemural and transtibial) requires the preparation of a cartridge with appropriate and custom fit to the profile of each patient. The traditional process to the patients, mainly in public hospitals in Brazil, begins with the completion of a form where types of equipment, plugins, measures, levels of amputation etc. are identified. Currently, such work is carried out manually using a common metric tape and caliper of wood to take the measures of the stump, featuring a very rudimentary, and with a high degree of uncertainty geometry of the final product. To address this problem, it was necessary to act in two simultaneously and correlated directions. Originally, it was developed an integrated tool for viewing 3D CAD for transfemoral types of prostheses and transtibial called OrtoCAD I. At the same time, it was necessary to design and build a reader Mechanical equipment (sort of three-dimensional scanner simplified) able to obtain, automatically and with accuracy, the geometric information of either of the stump or the healthy leg. The methodology includes the application of concepts of reverse engineering to computationally generate the representation of the stump and/or the reverse image of the healthy member. The materials used in the manufacturing of prostheses nor always obey to a technical scientific criteria, because, if by one way it meets the criteria of resistance, by the other, it brings serious problems mainly due to excess of weight. This causes to the user various disorders due to lack of conformity. That problem was addressed with the creation of a hybrid composite material for the manufacture of cartridges of prostheses. Using the Reader Fitter and OrtoCAD, the new composite material, which aggregates the mechanical properties of strength and rigidity on important parameters such as low weight and low cost, it can be defined in its better way. Besides, it brings a reduction of up steps in the current processes of manufacturing or even the feasibility of using new processes, in the industries, in order to obtain the prostheses. In this sense, the hybridization of the composite with the combination of natural and synthetic fibers can be a viable solution to the challenges offered above
Resumo:
Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.
Resumo:
Objective: To examine the effects of treadmill inclinations on the walking of hemiparetic chronic subjects. Design: Observational descriptive study. Location: Laboratory of human movement analysis. Participants: Eighteen subjects, 10 men and 8 women were evaluated, with a mean age of 55.3 ± 9.3 years and the time since the injury of about 36 ± 22.8 months. Intervention: Not applicable. Main Outcome Measures: All subjects were evaluated for functional independence (Functional Independence Measure - FIM) and balance (Berg Balance Scale). Angular variations of the hips, knees and ankles in the sagittal plane were observed, as well as the speed of the movement (m/s), cadence (steps/min), stride length (m), cycle time (s), step time on the paretic leg and on the non-paretic leg (s), support phase time and balance phase time on the paretic leg (s) and the ratio of symmetry inter-limb as subjects walked on a treadmill at three conditions of inclination (0%, 5% and 10% ). Results: There were angular increases in the initial contact of the hip, knee and ankle, amplitude increase in the hip between 0% and 10% (37.83 ± 5.23 versus 41.12 ± 5.63, p < 0,001) and 5% and 10% (38.80 ± 5.96 versus 41.12 ± 5.63, p = 0,002), amplitude increases in the knee between 0% and 10% (47.51 ± 15.07 versus 50, 30 ± 12.82, p = 0,040), extension decreases in the hip, dorsiflexion increases in the balance phase and in the time of support phase from 0% to 5% (0.83 ± 0.21 versus 0.87 ± 0, 20, p = 0,011) and 0% and 10% (0.83 ± 0.21 versus 0.88 ± 0.23, p = 0,021). Conclusion: The treadmill inclination promoted angle changes as such as the increase of the angle of the hip, knee and ankle during the initial contact and the balance phase and the increase of the range of motion of the hip and knee; furthermore, it also promoted the increase of the support time of the paretic lower limb