Resilience and Burnout in Child protection social work: Individual and organisational themes from a systematic literature review

Child protection social work is acknowledged as a very stressful occupation, with high turnover and poor retention of staff being a major concern. This paper highlights themes that emerged from findings of sixty-five articles that were included as part of a systematic literature review. The review focused on the evaluation of research findings, which considered individual and organisational factors associated with resilience or burnout in child protection social work staff. The results identified a range of individual and organisational themes for staff in child protection social work. Nine themes were identified in total. These are categorised under ‘Individual’ and ‘Organisational’ themes. Themes categorised as individual included personal history of maltreatment, training and preparation for child welfare, coping, secondary traumatic stress, compassion fatigue and compassion satisfaction. Those classified as organisational included workload, social support and supervision, organisational culture and climate, organisational and professional commitment, and job satisfaction or dissatisfaction. The range of factors is discussed with recommendations and areas for future research are highlighted.

Inequality and Heights

This chapter discusses opportunities and limitations of height inequality, especially the role of social status and income distribution in determining height inequality. The more unequal the income distribution in a society, the more unequal the corresponding height distribution. At one time, the height gap between rich and poor teenagers in industrializing England was as high as 22 cm (8.7 inches); today, height inequality tends to be much lower (on the order of a few centimeters) because the gap between rich and poor in developed countries tends to be smaller. Results presented here suggest that height inequality is driven by differences in purchasing power, education, physical workload, and epidemiological environment. In a modern setting, social safety and redistribution of income is also relevant. An introduction into the literature helps illustrate opportunities this methodology has to offer to understand better the dynamics of the way populations experience economic development.

How Video Lecture Capture affects Student Engagement in a University Computer Programming Course: Attendance, Video Viewing Behaviours and Student Attitudes

Introduction
The use of video capture of lectures in Higher Education is not a recent occurrence with web based learning technologies including digital recording of live lectures becoming increasing commonly offered by universities throughout the world (Holliman and Scanlon, 2004). However in the past decade the increase in technical infrastructural provision including the availability of high speed broadband has increased the potential and use of videoed lecture capture. This had led to a variety of lecture capture formats including pod casting, live streaming or delayed broadcasting of whole or part of lectures.
Additionally in the past five years there has been a significant increase in the popularity of online learning, specifically via Massive Open Online Courses (MOOCs) (Vardi, 2014). One of the key aspects of MOOCs is the simulated recording of lecture like activities. There has been and continues to be much debate on the consequences of the popularity of MOOCs, especially in relation to its potential uses within established University programmes.
There have been a number of studies dedicated to the effects of videoing lectures.
The clustered areas of research in video lecture capture have the following main themes:
• Staff perceptions including attendance, performance of students and staff workload
• Reinforcement versus replacement of lectures
• Improved flexibility of learning
• Facilitating engaging and effective learning experiences
• Student usage, perception and satisfaction
• Facilitating students learning at their own pace
Most of the body of the research has concentrated on student and faculty perceptions, including academic achievement, student attendance and engagement (Johnston et al, 2012).
Generally the research has been positive in review of the benefits of lecture capture for both students and faculty. This perception coupled with technical infrastructure improvements and student demand may well mean that the use of video lecture capture will continue to increase in frequency in the next number of years in tertiary education. However there is a relatively limited amount of research in the effects of lecture capture specifically in the area of computer programming with Watkins 2007 being one of few studies . Video delivery of programming solutions is particularly useful for enabling a lecturer to illustrate the complex decision making processes and iterative nature of the actual code development process (Watkins et al 2007). As such research in this area would appear to be particularly appropriate to help inform debate and future decisions made by policy makers.
Research questions and objectives
The purpose of the research was to investigate how a series of lecture captures (in which the audio of lectures and video of on-screen projected content were recorded) impacted on the delivery and learning of a programme of study in an MSc Software Development course in Queen’s University, Belfast, Northern Ireland. The MSc is conversion programme, intended to take graduates from non-computing primary degrees and upskill them in this area. The research specifically targeted the Java programming module within the course. It also analyses and reports on the empirical data from attendances and various video viewing statistics. In addition, qualitative data was collected from staff and student feedback to help contextualise the quantitative results.
Methodology, Methods and Research Instruments Used
The study was conducted with a cohort of 85 post graduate students taking a compulsory module in Java programming in the first semester of a one year MSc in Software Development. A pre-course survey of students found that 58% preferred to have available videos of “key moments” of lectures rather than whole lectures. A large scale study carried out by Guo concluded that “shorter videos are much more engaging” (Guo 2013). Of concern was the potential for low audience retention for videos of whole lectures.
The lecturers recorded snippets of the lecture directly before or after the actual physical delivery of the lecture, in a quiet environment and then upload the video directly to a closed YouTube channel. These snippets generally concentrated on significant parts of the theory followed by theory related coding demonstration activities and were faithful in replication of the face to face lecture. Generally each lecture was supported by two to three videos of durations ranging from 20 – 30 minutes.
Attendance
The MSc programme has several attendance based modules of which Java Programming was one element. In order to assess the consequence on attendance for the Programming module a control was established. The control used was a Database module which is taken by the same students and runs in the same semester.
Access engagement
The videos were hosted on a closed YouTube channel made available only to the students in the class. The channel had enabled analytics which reported on the following areas for all and for each individual video; views (hits), audience retention, viewing devices / operating systems used and minutes watched.
Student attitudes
Three surveys were taken in regard to investigating student attitudes towards the videoing of lectures. The first was before the start of the programming module, then at the mid-point and subsequently after the programme was complete.
The questions in the first survey were targeted at eliciting student attitudes towards lecture capture before they had experienced it in the programme. The midpoint survey gathered data in relation to how the students were individually using the system up to that point. This included feedback on how many videos an individual had watched, viewing duration, primary reasons for watching and the result on attendance, in addition to probing for comments or suggestions. The final survey on course completion contained questions similar to the midpoint survey but in summative view of the whole video programme.
Conclusions and Outcomes
The study confirmed findings of other such investigations illustrating that there is little or no effect on attendance at lectures. The use of the videos appears to help promote continual learning but they are particularly accessed by students at assessment periods. Students respond positively to the ability to access lectures digitally, as a means of reinforcing learning experiences rather than replacing them. Feedback from students was overwhelmingly positive indicating that the videos benefited their learning. Also there are significant benefits to part recording of lectures rather than recording whole lectures. The behaviour viewing trends analytics suggest that despite the increase in the popularity of online learning via MOOCs and the promotion of video learning on mobile devices in fact in this study the vast majority of students accessed the online videos at home on laptops or desktops However, in part, this is likely due to the nature of the taught subject, that being programming.
The research involved prerecording the lecture in smaller timed units and then uploading for distribution to counteract existing quality issues with recording entire live lectures. However the advancement and consequential improvement in quality of in situ lecture capture equipment may well help negate the need to record elsewhere. The research has also highlighted an area of potentially very significant use for performance analysis and improvement that could have major implications for the quality of teaching. A study of the analytics of the viewings of the videos could well provide a quick response formative feedback mechanism for the lecturer. If a videoed lecture either recorded live or later is a true reflection of the face to face lecture an analysis of the viewing patterns for the video may well reveal trends that correspond with the live delivery.

Methods and Metrics for Fair Server Assessment under Real-Time Financial Workloads

We present a rigorous methodology and new metrics for fair comparison of server and microserver platforms. Deploying our methodology and metrics, we compare a microserver with ARM cores against two servers with ×86 cores running the same real-time financial analytics workload. We define workload-specific but platform-independent performance metrics for platform comparison, targeting both datacenter operators and end users. Our methodology establishes that a server based on the Xeon Phi co-processor delivers the highest performance and energy efficiency. However, by scaling out energy-efficient microservers, we achieve competitive or better energy efficiency than a power-equivalent server with two Sandy Bridge sockets, despite the microserver's slower cores. Using a new iso-QoS metric, we find that the ARM microserver scales enough to meet market throughput demand, that is, a 100% QoS in terms of timely option pricing, with as little as 55% of the energy consumed by the Sandy Bridge server.

ALEA: Fine-Grain Energy Profiling with Basic Block Sampling

Energy efficiency is an essential requirement for all contemporary computing systems. We thus need tools to measure the energy consumption of computing systems and to understand how workloads affect it. Significant recent research effort has targeted direct power measurements on production computing systems using on-board sensors or external instruments. These direct methods have in turn guided studies of software techniques to reduce energy consumption via workload allocation and scaling. Unfortunately, direct energy measurements are hampered by the low power sampling frequency of power sensors. The coarse granularity of power sensing limits our understanding of how power is allocated in systems and our ability to optimize energy efficiency via workload allocation.
We present ALEA, a tool to measure power and energy consumption at the granularity of basic blocks, using a probabilistic approach. ALEA provides fine-grained energy profiling via sta- tistical sampling, which overcomes the limitations of power sens- ing instruments. Compared to state-of-the-art energy measurement tools, ALEA provides finer granularity without sacrificing accuracy. ALEA achieves low overhead energy measurements with mean error rates between 1.4% and 3.5% in 14 sequential and paral- lel benchmarks tested on both Intel and ARM platforms. The sampling method caps execution time overhead at approximately 1%. ALEA is thus suitable for online energy monitoring and optimization. Finally, ALEA is a user-space tool with a portable, machine-independent sampling method. We demonstrate two use cases of ALEA, where we reduce the energy consumption of a k-means computational kernel by 37% and an ocean modelling code by 33%, compared to high-performance execution baselines, by varying the power optimization strategy between basic blocks.

Realistic evaluation of EWS and ALERT: factors enabling and constraining implementation.

Realistic Evaluation of EWS and ALERT: factors enabling and constraining implementation Background The implementation of EWS and ALERT in practice is essential to the success of Rapid Response Systems but is dependent upon nurses utilising EWS protocols and applying ALERT best practice guidelines. To date there is limited evidence on the effectiveness of EWS or ALERT as research has primarily focused on measuring patient outcomes (cardiac arrests, ICU admissions) following the implementation of a Rapid Response Team. Complex interventions in healthcare aimed at changing service delivery and related behaviour of health professionals require a different research approach to evaluate the evidence. To understand how and why EWS and ALERT work, or might not work, research needs to consider the social, cultural and organisational influences that will impact on successful implementation in practice. This requires a research approach that considers both the processes and outcomes of complex interventions, such as EWS and ALERT, implemented in practice. Realistic Evaluation is such an approach and was used to explain the factors that enable and constrain the implementation of EWS and ALERT in practice [1]. Aim The aim of this study was to evaluate factors that enabled and constrained the implementation and service delivery of early warnings systems (EWS) and ALERT in practice in order to provide direction for enabling their success and sustainability. Methods The research design was a multiple case study approach of four wards in two hospitals in Northern Ireland. It followed the principles of realist evaluation research which allowed empirical data to be gathered to test and refine RRS programme theory. This approach used a variety of mixed methods to test the programme theories including individual and focus group interviews, observation and documentary analysis in a two stage process. A purposive sample of 75 key informants participated in individual and focus group interviews. Observation and documentary analysis of EWS compliance data and ALERT training records provided further evidence to support or refute the interview findings. Data was analysed using NVIVO8 to categorise interview findings and SPSS for ALERT documentary data. These findings were further synthesised by undertaking a within and cross case comparison to explain the factors enabling and constraining EWS and ALERT. Results A cross case analysis highlighted similarities, differences and factors enabling or constraining successful implementation across the case study sites. Findings showed that personal (confidence; clinical judgement; personality), social (ward leadership; communication), organisational (workload and staffing issues; pressure from managers to complete EWS audit and targets), educational (constraints on training; no clinical educator on ward) and cultural (routine task delegated) influences impact on EWS and acute care training outcomes. There were also differences noted between medical and surgical wards across both case sites. Conclusions Realist Evaluation allows refinement and development of the RRS programme theory to explain the realities of practice. These refined RRS programme theories are capable of informing the planning of future service provision and provide direction for enabling their success and sustainability. References: 1. McGaughey J, Blackwood B, O’Halloran P, Trinder T. J. & Porter S. (2010) A realistic evaluation of Track and Trigger systems and acute care training for early recognition and management of deteriorating ward–based patients. Journal of Advanced Nursing 66 (4), 923-932. Type of submission: Concurrent session Source of funding: Sandra Ryan Fellowship funded by the School of Nursing & Midwifery, Queen’s University of Belfast

High Performance Real-time Pre-Processing for Fixed-Complexity Sphere Decoder

Pre-processing (PP) of received symbol vector and channel matrices is an essential pre-requisite operation for Sphere Decoder (SD)-based detection of Multiple-Input Multiple-Output (MIMO) wireless systems. PP is a highly complex operation, but relative to the total SD workload it represents a relatively small fraction of the overall computational cost of detecting an OFDM MIMO frame in standards such as 802.11n. Despite this, real-time PP architectures are highly inefficient, dominating the resource cost of real-time SD architectures. This paper resolves this issue. By reorganising the ordering and QR decomposition sub operations of PP, we describe a Field Programmable Gate Array (FPGA)-based PP architecture for the Fixed Complexity Sphere Decoder (FSD) applied to 4 × 4 802.11n MIMO which reduces resource cost by 50% as compared to state-of-the-art solutions whilst maintaining real-time performance.

Cognition, metacognition and patient safety

This article explores the factors that contribute to patient safety incidents. It highlights the importance of human factors in influencing the clinician's performance. Rather than focusing on clinical skills, the article explores the range of non-technical skills which are seen to each contribute to patient safety, including: communication, teamworking, leadership, active followership, situational awareness, decision-making, assertiveness, and workload management. It asks how cognitive processes can influence safe decision-making.

Systematic review of interventions to improve the psychological well-being of general practitioners

BACKGROUND: The health of doctors who work in primary care is threatened by workforce and workload issues. There is a need to find and appraise ways in which to protect their mental health, including how to achieve the broader, positive outcome of well-being. Our primary outcome was to evaluate systematically the research evidence regarding the effectiveness of interventions designed to improve General Practitioner (GP) well-being across two continua; psychopathology (mental ill-health focus) and 'languishing to flourishing' (positive mental health focus). In addition we explored the extent to which developments in well-being research may be integrated within existing approaches to design an intervention that will promote mental health and prevent mental illness among these doctors.

METHODS: Medline, Embase, Cinahl, PsychINFO, Cochrane Register of Trials and Web of Science were searched from inception to January 2015 for studies where General Practitioners and synonyms were the primary participants. Eligible interventions included mental ill-health prevention strategies (e.g. promotion of early help-seeking) and mental health promotion programmes (e.g. targeting the development of protective factors at individual and organizational levels). A control group was the minimum design requirement for study inclusion and primary outcomes had to be assessed by validated measures of well-being or mental ill-health. Titles and abstracts were assessed independently by two reviewers with 99 % agreement and full papers were appraised critically using validated tools.

RESULTS: Only four studies (with a total of 997 GPs) from 5392 titles met inclusion criteria. The studies reported statistically significant improvement in self-reported mental ill-health. Two interventions used cognitive-behavioural techniques, one was mindfulness-based and one fed-back GHQ scores and self-help information.

CONCLUSION: There is an urgent need for high quality, controlled studies in GP well-being. Research on improving GP well-being is limited by focusing mainly on stressors and not giving systematic attention to the development of positive mental health.

ThermoSpots to detect hypothermia in children with severe acute malnutrition

INTRODUCTION: Hypothermia is a risk factor for increased mortality in children with severe acute malnutrition (SAM). Yet frequent temperature measurement remains unfeasible in under-resourced units in developing countries. ThermoSpot is a continuous temperature monitoring sticker designed originally for neonates. When applied to skin, its liquid crystals are designed to turn black with hypothermia and remain green with normothermia.

AIMS: To (i) estimate the diagnostic accuracy of ThermoSpots for detecting WHO-defined hypothermia (core temperature <35.5°C or peripheral temperature <35.0°C) in children with SAM and (ii) determine their acceptability amongst mothers.

METHODS: Children with SAM in a malnutrition unit in Malawi were enrolled during March-July 2010. The sensitivity and specificity of ThermoSpots were calculated by comparing the device colour against 'gold standard' rectal temperatures taken on admission and follow up peripheral temperatures taken until discharge. Guardians completed a questionnaire to assess acceptability.

RESULTS: Hypothermia was uncommon amongst the 162 children enrolled. ThermoSpot successfully detected the one rectal temperature and two peripheral temperatures recorded that met the WHO definition of hypothermia. Overall, 3/846 (0.35%) temperature measurements were in the WHO-defined hypothermia range. Interpreting the brown transition colour (between black and green) as hypothermia improved sensitivities. For milder hypothermia definitions, sensitivities declined (<35.4°C, 50.0%; <35.9°C, 39.2%). Specificity was consistently above 94%. From questionnaires, 40/43 (93%) mothers reported they were 90-100% happy with the device overall. Free-text answers revealed themes of "Skin Rashes", "User-satisfaction" and "Empowerment".

CONCLUSION: Although hypothermia was uncommon in this study, ThermoSpots successfully detected these episodes in malnourished children and were acceptable to mothers. Research in settings where hypothermia is common is needed to determine performance with certainty. Instructing users to act when the device's transition colour appears could improve accuracy. If reliable, ThermoSpots may offer simple, acceptable and continuous temperature measurement for high-burden areas and reduce the workload of over-stretched staff.

Energy Optimization of Memory Intensive Parallel Workloads

Energy consumption is an important concern in modern multicore processors. The energy consumed by a multicore processor during the execution of an application can be minimized by tuning the hardware state utilizing knobs such as frequency, voltage etc. The existing theoretical work on energy minimization using Global DVFS (Dynamic Voltage and Frequency Scaling), despite being thorough, ignores the time and the energy consumed by the CPU on memory accesses and the dynamic energy consumed by the idle cores. This article presents an analytical energy-performance model for parallel workloads that accounts for the time and the energy consumed by the CPU chip on memory accesses in addition to the time and energy consumed by the CPU on CPU instructions. In addition, the model we present also accounts for the dynamic energy consumed by the idle cores. The existing work on global DVFS for parallel workloads shows that using a single frequency for the entire duration of a parallel application is not energy optimal and that varying the frequency according to the changes in the parallelism of the workload can save energy. We present an analytical framework around our energy-performance model to predict the operating frequencies (that depend upon the amount of parallelism) for global DVFS that minimize the overall CPU energy consumption. We show how the optimal frequencies in our model differ from the optimal frequencies in a model that does not account for memory accesses. We further show how the memory intensity of an application affects the optimal frequencies.

Blended learning na formação contínua em educação sexual : um estudo com educadores de infância e professores do 1º CEB

Tese de doutoramento, Educação (Tecnologias de Informação e Comunicação na Educação), Universidade de Lisboa, Instituto de Educação, 2015

A psychosocial approach to understanding pilot and controller acceptance of change in ATM, based on three CDA case studies

Next generation ATM systems cannot be implemented in a technological vacuum. The further ahead we look, the greater the likely impact of societal factors on such changes, and how they are prioritised and promoted. The equitable sustainability of travel behaviour is rising on the political agenda in Europe in an unprecedented manner. This paper examines pilot and controller attitudes towards Continuous Descent Approaches (CDAs). It aims to promote a better understanding of acceptance of change in ATM. The focus is on the psychosocial context and the relationships between perceived societal and system benefits. Behavioural change appeared more correlated with such benefit perceptions in the case of the pilots. For the first time in the study of ATM implementation, and acceptance of change, this paper incorporates the Seven Stages of Change model, based on the constructs of the Theory of Planned Behaviour. It employs a principal components (factor) analysis, and further explores the intercorrelations of benefit perceptions, known in psychology as the ‘halo effect’. Disbenefit perceptions may break down this effect, it appears. For implementers of change, this evidence suggests an approach in terms of reinforcing the dominant benefit(s) perceived, for sub-groups within which a halo effect is evident. In the absence of such an effect, perceived disbenefits, such as with respect to workload and capacity, should be off-set against specific, perceived benefits of the change, as far as possible. This methodology could be equally applied to other stakeholders, from strategic planners to the public. The set of three case studies will be extended beyond CDA trials. A set of concise guidelines will be published with a strong focus on practical advice, in addition to continued work enabling a better understanding of the expected, increasing psychosocial contributions to successful and unsuccessful efforts at ATM innovation and change.

Corrections

Summary form only given, as follows. In Vol. 12, no. 3 (Summer 2007), page 9, bottom of the left column, in 'Computer Architecture and Amdahl??s Law' by Gene Amdahl, the claim about invalidating Amdahl??s Law in 1988 came from a team at Sandia National Laboratories, and not Los Alamos. The correct text should read: "Several years later I was informed of a proof that Amdahl's Law was invalidated by someone at Sandia National Laboratories, where a number of computers interconnected as an Ncube by communication lines, but with each computer also connected to I/O devices for loading the operating system, initial data, and results." On page 20 of the same issue, in the second sentence of the diagram explanation note by Justin Rattner, the percentage figures for the sequential and the system coordination parts of the workload were interchanged. The correct version of this sentence should read: "assuming a fixed sized problem, Amdahl speculated that most programs would require at least 10% of the computation to be sequential (only one instruction executing at a time), with overhead due to interprocessor coordination averaging 25%."

Business Models for Cloud Computing: Experiences from Developing Modeling & Simulation as a Service Applications in Industry

The potential of cloud computing is gaining significant interest in Modeling & Simulation (M&S). The underlying concept of using computing power as a utility is very attractive to users that can access state-of-the-art hardware and software without capital investment. Moreover, the cloud computing characteristics of rapid elasticity and the ability to scale up or down according to workload make it very attractive to numerous applications including M&S. Research and development work typically focuses on the implementation of cloud-based systems supporting M&S as a Service (MSaaS). Such systems are typically composed of a supply chain of technology services. How is the payment collected from the end-user and distributed to the stakeholders in the supply chain? We discuss the business aspects of developing a cloud platform for various M&S applications. Business models from the perspectives of the stakeholders involved in providing and using MSaaS and cloud computing are investigated and presented.