Development of the Simulation Environment for the Mobile Phone User Interfaces

Diplomityössä käsitellään Nokia Mobile Phonesin matkapuhelimien käyttöliittymäohjelmistojen suunnittelu-ja testausympäristön kehitystä. Ympäristöön lisättiin kaksi ohjelmistomodulia avustamaan simulointia ja versionhallintaa. Visualisointityökalulla matkapuhelimen toiminta voidaan jäljittää suunnittelu- kaavioihin tilasiirtyminä, kun taas vertailusovelluksella kaavioiden väliset erot nähdään graafisesti. Kehitetyt sovellukset parantavat käyttöliittymien suunnitteluprosessia tehostaen virheiden etsintää, optimointia ja versionhallintaa. Visualisointityökalun edut ovat merkittävät, koska käyttöliittymäsovellusten toiminta on havaittavissa suunnittelu- kaavioista reaaliaikaisen simuloinnin yhteydessä. Näin virheet ovat välittömästi paikannettavissa. Lisäksi työkalua voidaan hyödyntää kaavioita optimoitaessa, jolloin sovellusten kokoja muistintarve pienenee. Graafinen vertailutyökalu tuo edun rinnakkaiseen ohjelmistosuunnitteluun. Eri versioisten suunnittelukaavioiden erot ovat nähtävissä suoraan kaaviosta manuaalisen vertailun sijaan. Molemmat työkalut otettiin onnistuneesti käyttöön NMP:llä vuoden 2001 alussa.

A design and a prototype for a mobile information service for tourists

Tourism is one of the biggest industry branches with billions of tourists traveling every year around the world. Therefore, solutions providing tourist information have to be up to date with both changes in the industry and the world’s technological progress. The aim of this thesis is to present a design and a prototype of a tourist mobile service which is individual-oriented, cost-free for the end user, and secure. On the information providers’ side, the solution is implemented as a Webbased database. The end users access the information through a Bluetooth application on their mobile devices. The Bluetooth-based solution allows to avoid any costs for the end users, that is tourists. The study shows that, even with small data transfers, the tourists could save significantly when compared to possible roaming charges for data transfer. Also, the proposed mobile service is not intrusive, as it is provided through an application installed by tourists voluntarily on their mobile devices. Through design and implementation this work shows that it is possible to build a system which can be used to provide information services to tourists through mobile phones. The work achieved a successful ongoing synchronization between the client and the server databases. Implementation and usage were limited to smart phones only, as they provide better technological support for the solution having features like maps, GPS, Wi-Fi, Bluetooth and Databases. Moreover, the design of this system shows how Bluetooth technology can be used effectively as a means of communication while minimizing its shortcomings and risks, such as security, by bypassing Bluetooth server service discovery protocol (SDP) and connecting directly to the device. Apart from showing the design and implementation of the end-user costfree mobile information service, the results of this work also highlight the possible business opportunities to the provider of the service.

User Experience Patterns for/of Innovation by Design: A Survey on Design Practices in the Software Development and Innovation Lifecycle

The User Experience (UX) designers are undoubtedly aware of how many UX design methods currently exist and that sometimes it becomes a problem to choose an appropriate one. What are all of methods that designers have in their “arsenal”? When can they use them? This thesis presents the research on the design methods in the contemporary context of User Experience (UX) and Innovations by using a survey approach. The study is limited to cover the domain of consumer mobile services development and provider companies around the world. The study follows 2 clear objectives: (1) to understand what design methods are currently used in that context and to what extent they are used (2) to identify at what stage according to the UX design thinking process for creating innovations they are placed. The study contributes to the research in the field of UX design and Innovations and extends the knowledge in that field together with communities’ (UXPA, SIGCHI, SIGSOFT) members’ cooperation. The research is vital due to lack of information on design practices and their application in the chosen context.

User Generated Content in Researching for Design: How the Internet Supports Creativity

Résumé Cette recherche a débuté avec l’idée que l’Internet est en train de changer la manière dont nous créons des connaissances et du contenu culturel. Notre point de départ était d’utiliser l’Internet afin de rassembler et amplifier plusieurs points de vue dans un processus de design. Une approche complexe a exposé l’Internet comme un système et conséquemment comme une plateforme pour l’innovation. La structure ouverte de l’Internet a soutenu le mouvement participatif des usagers qui ont choisi de partager leurs besoins, leurs désirs et leurs solutions. Notre recherche a pour but d’étudier ce contenu généré par les usagers en ligne et comprendre sa valeur pour les designers. Les usagers créatifs veulent s’exprimer et participer activement dans le processus de design. Notre recherche tente de démontrer que les designers ont beaucoup à apprendre du contenu généré par les usagers car ceux-ci soumettent des éléments qui ont attrait à toutes les étapes du processus de design et révèlent des relations présentes dans la situation de design à l’étude. Pour en apprendre plus sur ce contenu nous nous demandons : Quel type d’information offre le contenu généré par les usagers pour la phase de recherche dans le processus de design. Afin de centrer la portée de l’étude, nous nous sommes aussi questionné si cette information est plus pertinente au design de produits, au design de services ou au design de système de produits et de services. Aspirant aux idéaux du design participatif, notre méthodologie fut développée afin d’apprendre comment le contenu généré par les usagers pourrait influencer le processus de design. Pour ce faire, nous avons choisi de chercher sur l’Internet pour du contenu qui concerne la mobilité via l’usage d’une automobile. Les trois différents types de média considérés étaient les vidéos sur YouTube, les images sur Flickr et les textes sur Blogger. Afin de répondre à notre première question de recherche, nous nous sommes penchés sur deux éléments lorsque l’on recherche pour le design : les espaces de design et les relations de design. Premièrement, nous avons catégorisé le contenu récolté selon l’espace problème, créatif et solution. Deuxièmement, nous avons catégorisé le contenu dépendant de laquelle des relations de design elle démontrait soit une combinaison d’usagers, objets et contextes. Dans le but de répondre à la deuxième question de cette recherche, nous avons examiné trois types V de produits de design : les automobiles privées comme produit, le partage de voiture comme système de produit et de service, et le taxi comme service. Chaque élément pertinent généré par les usagés trouvé dans cette recherche fut catégorisé jusqu’à ce que l’on récolte 50 échantillons pour chaque combinaison de ces variables. Nous en sommes arrivés avec une matrice de 50 éléments de chaque produit de design, pour chacun des médias, puis catégorisé selon les espaces de design et les relations dans le design. Cette recherche démontre que l’Internet, comme médium, produit les conditions avantageuses pour que les usagers partagent de grandes quantités de contenu original et diversifié qui est pertinent aux situations de design. À partir de nos données de recherche, nous avons identifié des tendances dans le contenu généré par les usagers. Notamment, nous sommes en mesure d’affirmer que le contenu généré par les usagers offre de l’information pertinente à la recherche pour le design, et ce dans tous les espaces de design et toutes les relations de design. Il en fut de même pour les différentes issues du design car du contenu sur les produits, les systèmes de produits et de services et les services était présent et pertinent. Bref, nous avons démontré que l’Internet supporte la créativité et conséquemment il y abonde de contenu créatif produit par les usagers. Suivant dans les traces dessinées par d’autres chercheurs en design participatif, cette étude devrait être considérée comme un nouvel exemple des moyens qu’ont les designers pour percevoir les besoins tacites des usagers en leur permettant d’exprimer leurs idées. Alors que ceux-ci créent librement et intuitivement ainsi exposant leurs besoins, solutions et idées, les designers peuvent porter un regard de tierce partie sur les résultats. Jumelant des techniques comme le crowdsourcing et le brainstorming, nous avons créé une nouvelle activité et le néologisme : brainsourcing. En demeurant dans une forme de pratique réflexive, les designers peuvent réfléchir et ajouter au contenu généré par les usagers qui lui n’est pas biaisé par une éducation ou une culture du design. Ce processus est similaire au design participatif professionnel où le brainsourcing est une activité parallèle lorsque le designer fait des recherches pour le design. C’est cette perspective sur la somme des idées des participants qui peut contribuer à comprendre la complexité de la situation de design. VI Cette recherche a aussi soulevé des questions par rapport à l’effet de démocratisation de l’Internet. Bien que les usagers n’ont pas l’éducation, ni les habiletés des designers, ils aspirent à démocratiser le processus du design en voulant participer activement et en exposant leurs besoins, idées et solutions. Nous avons pu déterminer que les usagers n’étaient pas qualifiés pour entreprendre le processus complet du design comme les designers professionnels, mais nous avons observé directement la capacité des usagers à mettre de l’avant leur créativité. À propos de la relation entre les usagers créatifs et les designers, nous avons étudié des langages communs tels les scénarios et les prototypes. Tous deux sont présents dans le contenu généré par les usagers que nous avons récolté dans nos recherches sur Internet. Ceci nous a mené vers une nouvelle perspective sur l’activité du design où des opportunités créatives ressortent d’une conversation avec les usagers. Cette recherche a dévoilé de grandes tendances dans la manière dont les usagers communiquent naturellement dans un processus de design. Nous espérons avoir offert un aperçu de comment les designers peuvent prendre avantage de tous les types de contenu généré par les usagers en ligne. Dans le futur, nous souhaitons que les designers aient la possibilité d’interagir avec les participants en prenant le rôle de facilitateur de la conversation. La responsabilité du résultat ne tombe pas sur les épaules du designer car son mandat est d’assurer le bon fonctionnement du processus. Les designers rejoignent les usagers en ne demandant plus comment les choses peuvent être créées, mais pourquoi elles devraient exister. En tant que designers, nous aspirons à générer plus à partir de nouvelles connaissances, nous aspirons à créer plus de sens. Mots clés: Recherche en design, complexité, design participatif, contenu généré par les usagers, démocratisation, Internet, créativité, crowdsourcing, brainstorming, brainsourcing, réflexion-en-action.

The autotelic experience : a design approach to user experience

Si les principes d’utilisabilité guident la conception de solutions de design interactif pour s’assurer que celles-ci soient « utilisables », quels principes guident la conception d’objets interactifs pour s’assurer que l’expérience subjective de l’usager (UX) soit adéquate et mémorable? Que manque-t-il au cadre de l‘UX pour expliquer, comprendre, et anticiper en tant que designer une expérience mémorable (‘an experience’; Dewey, 1934)? La question centrale est issue d’une double problématique : (1) le cadre théorique de l’UX est incomplet, et (2) les processus et capacités des designers ne sont pas considérés et utilisés à leur pleine capacité en conception UX. Pour répondre à cette question, nous proposons de compléter les modèles de l’UX avec la notion d’expérience autotélique qui appartient principalement à deux cadres théoriques ayant bien cerné l’expérience subjective, soit l’expérience optimale (ou Flow) de Csikszentmihalyi (1988) et l’expérience esthétique selon Schaeffer (2001). L’autotélie est une dimension interne du Flow alors qu’elle couvre toute l’expérience esthétique. L’autotélie est une expérience d’éveil au moment même de l’interaction. Cette prise de conscience est accompagnée d’une imperceptible tension de vouloir faire durer ce moment pour faire durer le plaisir qu’il génère. Trois études exploratoires ont été faites, s’appuyant sur une analyse faite à partir d’un cadre théorique en trois parties : le Flow, les signes d’activité non verbale (les gestes physiques) et verbale (le discours) ont été évalués pour voir comment ceux-ci s’associent. Nos résultats tendent à prouver que les processus spatiaux jouent un rôle de premier plan dans l’expérience autotélique et par conséquent dans une UX optimale. De plus, ils suggèrent que les expériences pragmatique et autotélique sont ancrées dans un seul et même contenu, et que leur différence tient au type d’attention que le participant porte sur l’interaction, l’attention ordinaire ou de type autotélique. Ces résultats nous ont menés à proposer un modèle pour la conception UX. L’élément nouveau, resté jusqu’alors inaperçu, consiste à s’assurer que l’interface (au sens large) appelle une attitude réceptive à l’inattendu, pour qu’une information puisse déclencher les processus spatiaux, offrant une opportunité de passer de l’attention ordinaire à l’attention autotélique. Le nouveau modèle ouvre la porte à une meilleure valorisation des habiletés et processus du designer au sein de l’équipe multidisciplinaire en conception UX.

Performance-Driven Microfabrication-Oriented Methodology for MEMS Conceptual Design with Application in Microfluidic Device Design

Performance and manufacturability are two important issues that must be taken into account during MEMS design. Existing MEMS design models or systems follow a process-driven design paradigm, that is, design starts from the specification of process sequence or the customization of foundry-ready process template. There has been essentially no methodology or model that supports generic, high-level design synthesis for MEMS conceptual design. As a result, there lacks a basis for specifying the initial process sequences. To address this problem, this paper proposes a performance-driven, microfabrication-oriented methodology for MEMS conceptual design. A unified behaviour representation method is proposed which incorporates information of both physical interactions and chemical/biological/other reactions. Based on this method, a behavioural process based design synthesis model is proposed, which exploits multidisciplinary phenomena for design solutions, including both the structural components and their configuration for the MEMS device, as well as the necessary substances for the chemical/biological/other reactions. The model supports both forward and backward synthetic search for suitable phenomena. To ensure manufacturability, a strategy of using microfabrication-oriented phenomena as design knowledge is proposed, where the phenomena are developed from existing MEMS devices that have associated MEMS-specific microfabrication processes or foundry-ready process templates. To test the applicability of the proposed methodology, the paper also studies microfluidic device design and uses a micro-pump design for the case study.

Workflow-oriented collaborative grid portals

The paper presents how workflow-oriented, single-user Grid portals could be extended to meet the requirements of users with collaborative needs. Through collaborative Grid portals different research and engineering teams would be able to share knowledge and resources. At the same time the workflow concept assures that the shared knowledge and computational capacity is aggregated to achieve the high-level goals of the group. The paper discusses the different issues collaborative support requires from Grid portal environments during the different phases of the workflow-oriented development work. While in the design period the most important task of the portal is to provide consistent and fault tolerant data management, during the workflow execution it must act upon the security framework its back-end Grids are built on.

Considering user attitude and behavior in persuasive systems design: the 3D-RAB model

As in any technology systems, analysis and design issues are among the fundamental challenges in persuasive technology. Currently, the Persuasive Systems Development (PSD) framework is considered to be the most comprehensive framework for designing and evaluation of persuasive systems. However, the framework is limited in terms of providing detailed information which can lead to selection of appropriate techniques depending on the variable nature of users or use over time. In light of this, we propose a model which is intended for analysing and implementing behavioural change in persuasive technology called the 3D-RAB model. The 3D-RAB model represents the three dimensional relationships between attitude towards behaviour, attitude towards change or maintaining a change, and current behaviour, and distinguishes variable levels in a user’s cognitive state. As such it provides a framework which could be used to select appropriate techniques for persuasive technology.

Considering user attitude and behaviour in persuasive systems design: the 3D-RAB model

As in any technology systems, analysis and design issues are among the fundamental challenges in persuasive technology. Currently, the Persuasive Systems Development (PSD) framework is considered to be the most comprehensive framework for designing and evaluation of persuasive systems. However, the framework is limited in terms of providing detailed information which can lead to selection of appropriate techniques depending on the variable nature of users or use over time. In light of this, we propose a model which is intended for analysing and implementing behavioural change in persuasive technology called the 3D-RAB model. The 3D-RAB model represents the three dimensional relationships between attitude towards behaviour, attitude towards change or maintaining a change, and current behaviour, and distinguishes variable levels in a user’s cognitive state. As such it provides a framework which could be used to select appropriate techniques for persuasive technology.

The design of a semantics-oriented organisational performance measurement system

Current methods and techniques used in designing organisational performance measurement systems do not consider the multiple aspects of business processes or the semantics of data generated during the lifecycle of a product. In this paper, we propose an organisational performance measurement systems design model that is based on the semantics of an organisation, business process and products lifecycle. Organisational performance measurement is examined from academic and practice disciplines. The multi-discipline approach is used as a research tool to explore the weaknesses of current models that are used to design organisational performance measurement systems. This helped in identifying the gaps in research and practice concerning the issues and challenges in designing information systems for measuring the performance of an organisation. The knowledge sources investigated include on-going and completed research project reports; scientific and management literature; and practitioners’ magazines.

A influência da integração multissensorial na construção do espaço semântico no sistema Kansei de engenharia: um estudo de Design Ergonômico com barbeadores descartáveis

Pós-graduação em Design - FAAC

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.