Larval dispersal reveals regional sources and sinks in the Great Barrier Reef

We analysed simulated connectivity patterns for reef fish larvae in the Cairns section of the Great Barrier Reef, and identified 2 key subregions that exhibit regional scale source–sink dynamics. The source and sink were separated latitudinally by a boundary at 16.1°S, with the source subregion lying to the north. Larval transport between the 2 subregions was predominantly unidirectional, from north to south. Only a few local populations, described here as ‘gateway reefs’, were able to transport larvae from the sink subregion to the source subregion and thus maintain the connectedness of the metapopulation. The northern subregion was able to persist without external larval supply, but when conditions were recruitment limited, the southern subregion depended on larval supply from the north to persist. The relative autonomy of the northern subregion, and its importance in sustaining the southern subregion, will influence the effectiveness of conservation efforts.

AS RELAÇÕES ENTRE CONFLITO TRABALHO-FAMÍLIA, BEM-ESTAR SUBJETIVO E BEM-ESTAR NO TRABALHO

O conflito trabalho-família é um fenômeno freqüente nas sociedades atuais em que homens e mulheres dividem responsabilidades familiares e profissionais. A sua direção pode ser unidirecional ou bidirecional, ou seja, da família para o trabalho, do trabalho para a família ou simultaneamente de uma esfera para outra, afetando sensivelmente as relações familiares e as relações nas organizações, sendo possível afetar diretamente o bem-estar dos indivíduos. Este é um estudo de natureza quantitativa e com desenho transversal. O critério para a escolha de participantes foi o de conveniência. O objetivo geral desta pesquisa foi analisar as relações entre conflito trabalho-família (CTF), bem-estar subjetivo (BES) e bem-estar no trabalho (BET). O estudo contou com a participação de 174 trabalhadores em uma amostra diversificada de profissionais do segmento privado, público e de ONG, sendo 52,9% do sexo feminino, com idade média de 38,29 anos (DP=11,22). Para a obtenção dos dados optou-se por um questionário abrangendo as três variáveis do estudo contendo duas escalas para aferir as dimensões de BES, uma escala para aferir BET e uma escala para aferir CTF/CFT. Para a análise dos dados foi usado o SPSS, versão 20. Foram calculadas frequências, percentuais, médias, desvios-padrão, e índices de correlação, bem como índices de precisão das medidas usadas (Alpha de Cronbach). Os resultados apontaram para uma maior interferência do trabalho na família do que da família no trabalho. Essa interferência foi significativa tanto para o bem-estar no trabalho, quanto para o bem-estar subjetivo, alterando o envolvimento com o trabalho e gerando sentimentos de infelicidade, desânimo e angústia em relação as suas realizações pessoais, e ao futuro. Quanto maior o conflito trabalho-família, menor é o bem-estar no trabalho e menor é o bem-estar subjetivo desses participantes.

The UK productivity gap in the service sector: do management practices matter?

Purpose – This paper aims to contribute to the debate on the drivers of the productivity gap that exists between the UK and its major international competitors. Design/methodology/approach – From the macro perspective the paper explores the quantitative evidence on the productivity differentials and how they are measured. From the micro perspective, the article explores the quantitative evidence on the role of management practices claimed to be a key determinant in promoting firm competitiveness and in bridging the UK gap. Findings – This study suggests that management practices are an ambiguous driver of firm productivity and higher firm performance. On the methodological side, qualitative and subjective measures of either management practices or firm performance are often used. This makes the results not comparable across studies, across firms or even within firms over time. Productivity and profitability are often and erroneously interchangeably used while productivity is only one element of firm performance. On the other hand, management practices are multi-dimensional constructs that generally do not demonstrate a straightforward relationship with productivity variables. To assume that they are the only driver of higher productivity may be misleading. Moreover, there is evidence of an inverse causal relationship between management practices and firm performance. This calls into question most empirical results of the extant literature based on the unidirectional assumption of direct causality between management practices and firm performance. Research limitations/implications – These and other issues suggest that more research is needed to deepen the understanding of the UK productivity gap and more quantitative evidence should be provided on the way in which management practices contribute to the UK competitiveness. Their impact is not easily measurable due to their complexity and their complementary nature and this is a fertile ground for further research. Originality/value – This paper brings together the evidence on the UK productivity gap and its main drivers, provided by the economics, management and performance measurement literature. This issue scores very highly in the agenda of policy makers and academics and has important implications for practitioners interested in evaluating the impact of managerial best practices.

Surface acoustic wave devices with low loss and high frequency operation

This thesis describes an industrial research project carried out in collaboration with STC Components, Harlow, Essex. Technical and market trends in the use of surface acoustic wave (SAW) devices are reviewed. As a result, three areas not previously addressed by STC were identified: lower insertion loss designs, higher operating frequencies and improved temperature dependent stability. A review of the temperature performance of alternative lower insertion loss designs,shows that greater use could be made of the on-site quartz growing plant. Data is presented for quartz cuts in the ST-AT range. This data is used to modify the temperature performance of a SAW filter. Several recently identified quartz orientations have been tested. These are SST, LST and X33. Problems associated with each cut are described and devices demonstrated. LST quartz, although sensitive to accuracy of cut, is shown to have an improved temperature coefficient over the normal ST orientation. Results show that its use is restricted due to insertion loss variations with temperature. Effects associated with split-finger transducers on LST-quartz are described. Two low-loss options are studied, coupled resonator filters for very narrow bandwidth applications and single phase unidirectional transducers (SPUDT) for fractional bandwidths up to about 1%. Both designs can be implemented with one quarter wavelength transducer geometries at operating frequencies up to 1GHz. The SPUDT design utilised an existing impulse response model to provide analysis of ladder or rung transducers. A coupled resonator filter at 400MHz is demonstrated with a matched insertion loss of less than 3.5dB and bandwidth of 0.05%. A SPUDT device is designed as a re-timing filter for timing extraction in a long haul PCM transmission system. Filters operating at 565MHz are demonstrated with insertion losses of less than 6dB. This basic SPUDT design is extended to a maximally distributed version and demonstrated at 450MHz with 9.8dB insertion loss.

Optic flow in human vision: MEG reveals a foveo-fugal bias in V1, specialization for spiral space in hMSTs, and global motion sensitivity in the IPS

Abstract We recorded MEG responses from 17 participants viewing random-dot patterns simulating global optic flow components (expansion, contraction, rotation, deformation, and translation) and a random motion control condition. Theta-band (3–7 Hz), MEG signal power was greater for expansion than the other optic flow components in a region concentrated along the calcarine sulcus, indicating an ecologically valid, foveo-fugal bias for unidirectional motion sensors in V1. When the responses to the optic flow components were combined, a decrease in MEG beta-band (17–23 Hz) power was found in regions extending beyond the calcarine sulcus to the posterior parietal lobe (inferior to IPS), indicating the importance of structured motion in this region. However, only one cortical area, within or near the V5/hMT+ complex, responded to all three spiral-space components (expansion, contraction, and rotation) and showed no selectivity for global translation or deformation: we term this area hMSTs. This is the first demonstration of an exclusive region for spiral space in the human brain and suggests a functional role better suited to preliminary analysis of ego-motion than surface pose, which would involve deformation. We also observed that the rotation condition activated the cerebellum, suggesting its involvement in visually mediated control of postural adjustment.

Long period gratings written into a photonic crystal fibre by a femtosecond laser as directional bend sensors

A series of symmetric and asymmetric LPGs were inscribed in photonic crystal fibre by a low repetition rate femtosecond laser system. The asymmetric LPGs were found to be spectrally sensitive to bend orientation, with some of the attenuation bands producing both red and blue wavelength shifts, whilst the symmetric devices produced only a unidirectional wavelength shift. Both sets of devices displayed strong polarisation dependence.

The plasma nutriding of tool and bearing steels

There is some evidence to suggest that nitriding of alloy steels, in particular high speed tool steels, under carefully controlled conditions might sharply increase rolling contact fatigue resistance. However, the subsurface shear stresses developed in aerospace bearing applications tend to occur at depths greater than the usual case depths currently produced by nitriding. Additionally, case development must be limited with certain materials due to case spalling and may not always be sufficient to achieve the current theoretical depths necessary to ensure that peak stresses occur within the case. It was the aim of' this work to establish suitable to overcome this problem by plasma nitriding. To assist this development a study has been made of prior hardening treatment, case development, residual stress and case cracking tendency. M2 in the underhardened, undertempered and fully hardened and tempered conditions all responded similarly to plasma nitriding - maximum surface hardening being achieved by plasma nitriding at 450°C. Case development varied linearly with increasing treatment temperature and also with the square root of the treatment time. Maximum surface hardness of M5O and Tl steels was achieved by plasma nitriding in 15% nitrogen/85% hydrogen and varied logarithmically with atmosphere nitrogen content. The case-cracking contact stress varied linearly with nitriding temperature for M2. Tl and M5O supported higher stresses after nitriding in low nitrogen plasma atmospheres. Unidirectional bending fatigue of M2 has been improved up to three times the strength of the fully hardened and tempered condition by plasma nitriding for 16hrs at 400°C. Fatigue strengths of Tl and M5O have been improved by up to 30% by plasma nitriding for 16hrs at 450°C in a 75% hydrogen/25% nitrogen atmosphere.

The transition from severe to mild wear in law alloy steel

The wear rates of sliding surfaces are significantly reduced if mild oxidational wear can be encouraged. It is hence of prime importance in the interest of component life and material conservation to understand the factors necessary to promote mild, oxidational wear, The present work investigates the fundamental mechanism of the running-in wear of BS EN 31!EN 8 steel couples. under various conditions of load. speed and test duration. Unidirectional sliding experiments were carried out on a pin-on~disc wear machine where frictional force, wear rate, temperature and contact resistance were continuously monitored during each test. Physical methods of analysis (x-ray, scanning electron microscopy etc.) were used to examine the wear debris and worn samples. The wear rate versus load curves revealed mild wear transitions, which under long duration of running, categorized mild wear into four distinct regions.α-Fe20s. Fe304, FeO and an oxide mixture were the predominant oxides in four regions of oxidational wear which were identified above the Welsh T2 transition. The wear curves were strongly effected by the speed and test duration. A surface model was used to calculate the surface parameters, and the results were found to be comparable with the experimentally observed parameters. Oxidation was responsible for the transition from severe to mild wear at a load corresponding to the Welsh T2 transition. In the running-in period sufficient energy input and surface hardness enabled oxide growth rate to increase and eventually exceeded the rate of removal, where mild wear ensued. A model was developed to predict the wear volume up to the transition. Remarkable agreement was found between the theoretical prediction and the experimentally-measured values. The oxidational mechanjsm responsible for transitjon to mild wear under equilibrium conditions was related to the formation of thick homogenous oxide plateaux on subsurface hardened layers, FeO was the oxide formed initially at the onset of mild wear but oxide type changed.during the total running period to give an equilibrium oxide whose nature depended on the loads applied.

The effects of nitrogen mustard on plasma membrane function

The antitumour bifunctional alkylating agent nitrogen mustard (HN2) inhibited the unidirectional influx of the potassium congener, 86 rubidium, into murine PC6A plasmacytoma cells and L1210 leukaemia cells. The proliferation of L1210 cells in vitro was characterised and shown to be sentitive to HN2. 86Rubidium influx into cells from rapidly-dividing cultures was more sensitive to inhibition by HN2 than that of cells from stationary cultures. Three components of unidirectional 86Rb+ & K+ influx into proliferating L1210 cells were identified pharmacologically: approximately 40% was active to the Na+ K+ ATPase inhibitor ouabain (10-3M), 40% was sensitive to the `loop' diuretics bumetanide (10-4M) and furosemide (10-3M) and the remainder was insensitive to both ouabain and furosemide. HN2 (10-5M) selectively inhibited the diuretic-sensitive component, which was entirely dependent upon extracellular Na+ and Cl- ions, and was presumed to represent Na+ K+ Cl- cotransport activity. The system did not mediate K+ /K+ exchange or unidirectional 86Rb+ efflux; accordingly, 86Rb+ efflux was insensitive to HN2. Inhibition of 86Rb & K+ influx by 10-5M HN2 was accompanied by approximately 35% of cell volume under isosmotic conditions; thus intracellular Na+ and K+ concentrations remained unchanged. These effects followed lethal damage to the cells but preceded actual cell death; other cellular functions were maintained including accumulation of cycloleucine, transmembrane potential, permeability to trypan blue, intracellular pH, total intracellular glutathione and calcium concentrations. No evidence was found that elevated cAMP levels or reduced ATP levels were involved in modulation of 86Rb+ & K+ influx. However, the Na+ - depedent transport of an amino acid was inhibited in a manner which appeared to be independent of 86Rb & K+ influx. An HN2-resistant L1210R cell line was also resistant to furosemide, and lacked a component of 86Rb+ & K+ influx which was sensitive to furosemide (10-3M). The results strongly suggest that the Na+ K+ Cl- costransporter of L1210 cells is a cellular target for HN2. This lesion is discussed with reference to the cytotoxic effects of the agent.

The effect of thermochemical treatment on the fatigue properties of alloy steels

The effect of thermochemical treatment namely carburising on the fatigue behaviour of one carbon and two alloy steels has been studied in rotating and unidirectional bending. The effect of carbon profile on the unidirect¬ional bending fatigue strength of 63SA14 was assessed, and it was found that single stage carburising with a surface carbon content of 0.8% has resulted in a higher fatigue strength than other types of carbon profiles. Residual stresses and other metallurgical variables arising from different carbon profiles, were also considered. The highest compressive stresses h~e resulted from boost-diffuse-carburising. On the other hand surface decarburisation was associated with tensile residual stresses and a reduced fatigue strength. Retained austenite was found to be detrimental in unidirectional bending fatigue; however its presence in carburised 83SAIS did not seem to influence the rotating bending fatigue strength. Carbide particles in globular and/or intergranular form were detrimental to compressive residual stresses; the unidirectional bending fatigue strength is markedly lowered. The highest fatigue strength was accomplished by vacuum carburising. The absence of internal oxidation was the key factor in the increased fatigue strength; the presence of uniformly distributed fine carbide particles did not upset the superior fatigue strength of vacuum carburised pieces. The effect of mean stress on the fatigue strength of carburised 63SA14 was studied. Increasing the mean stress as would be expected resulted in a decreased fatigue strength. Carburisation showed its advantages at low mean stress, but at high mean stress it offers little advantage over the uncarburised hardened conditions. Notch effect was also studied in unidirectional bending of carburised 080MlS. The general trend showed that the fatigue strength decreases with increasing the stress concentration factor. But different carburising conditions have different effect on notch sensitivity.

Personality across working life:the longitudinal and reciprocal influences of personality on work

Summary: This paper focuses on the role of personality at different stages of people's working lives. We begin by reviewing the research in industrial, work, and organizational (IWO) psychology regarding the longitudinal and dynamic influences of personality as an independent variable at different career stages, structuring our review around a framework of people's working lives and careers over time. Next, we review recent studies in the personality and developmental psychology domain regarding the influence of changing life roles on personality. In this domain, personality also serves as a dependent variable. By blending these two domains, it becomes clear that the study of reciprocal effects of work and personality might open a new angle in IWO psychology's long-standing tradition of personality research. To this end, we outline various implications for conceptual development (e.g., trait stability) and empirical research (e.g., personality and work incongruence). Finally, we discuss some methodological and statistical considerations for research in this new research domain. In the end, our review should enrich the way that IWO psychologists understand personality at work, focusing away from its unidirectional predictivist influence on job performance toward a more complex longitudinal reciprocal interplay of personality and working life. © 2013 John Wiley & Sons, Ltd.

Analysis of foveation sequences in congenital nystagmus

Congenital nystagmus (CN) is an ocular-motor disorder that appears at birth or during the first few months of life; it is characterised by involuntary, conjugated, bilateral to and fro ocular oscillations. Pathogenesis of congenital nystagmus is still unknown. Eye movement recording allow to extract and analyse nystagmus main features such as shape, amplitude and frequency; depending on the morphology of the oscillations nystagmus can be classified in different categories (pendular, jerk, horizontal unidirectional, bidirectional). In general, CN patient show a considerable decrease of the visual acuity: image fixation on the retina is disturbed by nystagmus continuous oscillations; however, image stabilisation is still achieved during the short foveation periods in which eye velocity slows down while the target image is placed onto the fovea. Visual acuity was found to be mainly dependent on foveation periods duration, but cycle-to-cycle foveation repeatability and reduction of retinal image velocities also contribute in increasing visual acuity. This study concentrate on cycle-to-cycle image position variation onto fovea, trying to characterise the sequences of foveation positions. Eye-movement (infrared oculographic or electro oculographic) recordings, relative to different gaze positions and belonging to more than 30 CN patients, were analysed. Preliminary results suggest that sequences of foveations show a cyclic pattern with a dominant frequency (around 0.3 Hz on average) much lower than that of the nystagmus (about 3.3 Hz on average). Sequences of foveations reveals an horizontal ocular swing of more than 2 degree on average, which can explain the low visual acuity of the CN patient. Current CN therapies, pharmacological treatment or surgery of the ocular muscles, mainly aim to increase the patient's visual acuity. Hence, it is fundamental to have an objective parameter (expected visual acuity) for therapy planning. The information about sequences of foveations can improve estimation of patient visual acuity. © 2008 Springer-Verlag.

Polarization dynamics of bound state solitons in a carbon nanotubes mode locked erbium doped fiber laser

Optical solitons are important in the modern photonics. Passively mode locked erbium doped fiber lasers provide a neat platform to study soliton dynamics. Soliton interaction dynamics is important for various applications and has quite different manifestations, including e.g. such as bound state solitons [1], soliton rains [2]. Soliton interactions have been observed with different mode locking approaches such as figure-of-eight [3] and nonlinear polarization rotation [4]. Carbon nanotubes (CNT) have recently been widely applied as an efficient saturable absorber for passively mode locked fiber lasers. We have recently studied the polarization dynamics in a CNT mode locked vector soliton erbium doped fiber laser [5]. So far, the polarization dynamics of bound state solitons have yet to be investigated. In this report, we present a wide range of polarization dynamics of bound state solitons generated in a CNT mode locked erbium doped fiber laser. The fiber laser consists of ∼ 2 m highly doped erbium fiber (Liekki Er80-8/125) as the gain medium, an optical isolator to ensure unidirectional oscillation anda 980 nm laser diode is used to pump the gain through the 1550/980 nm wavelength division multiplexer. A fused 10:90 coupler is used to couple 10 % of the light out of the laser cavity and two in-line polarization controllers (NewPort) are used to control the birefringence of the cavity and polarization of the pump light respectively. The total cavity length is ∼ 7.8 m indicating a 25.7 MHz fundamental repetition rate. © 2013 IEEE.

Practical and cost-effective high-fidelity optical carrier dissemination using coherent communication techniques

We report a unidirectional frequency dissemination scheme for high-fidelity optical carriers deployable over telecommunication networks. For the first time, a 10 Gb/s Binary Phase Shift Keying (BPSK) signal from an ultra-narrow linewidth laser was transmitted through a field-installed optical fibre with round-trip length of 124 km between Cork City and town of Clonakilty, without inline optical amplification. At the receiver, using coherent communication techniques and optical injection-locking the carrier was recovered with noise suppression. The beat signal between the original carrier at the transmitter and recovered carrier at the receiver shows a linewidth of 2.8 kHz. Long term stability measurements revealed fractional instabilities (True Allan deviation) of 3.3 × 10-14 for 1 s averaging time, prior to phase noise cancellation.

High power Q-switched thulium doped fibre laser using carbon nanotube polymer composite saturable absorber

We have proposed and demonstrated a Q-switched Thulium doped bre laser (TDFL) with a ‘Yin-Yang’ all- bre cavity scheme based on a combination of nonlinear optical loop mirror (NOLM) and nonlinear ampli ed loop mirror (NALM). Unidirectional lasing operation has been achieved without any intracavity isolator. By using a carbon nanotube polymer composite based saturable absorber (SA), we demonstrated the laser output power of ~197 mW and pulse energy of 1.7 μJ. To the best of our knowledge, this is the highest output power from a nanotube polymer composite SA based Q-switched Thulium doped bre laser.