1000 resultados para tillage systems
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Under conservation tillage systems is critical to maintaining plant residues from previous crops on the soil surface. A technique called Hormesis aims to increase the amount of straw and also cause a delay in straw decomposition. Therefore, this study aimed to evaluate the agronomic characteristics of corn under no-tillage system subjected to Hormesis. The experiment was carried out at UNESP campus in the city of Botucatu, SP . The experimental was design in completely randomized blocks. The treatments based on the technique of Hormesis were : control (no application) , sub Gliphosate low dosage (12.5 g.ai.ha - 1 ) , sub Gliphosate average dosage (25 g. ai.ha - 1 ) , sub Gliphosate high dose (50 g. ai.ha -1 ), 2,4-D under low dose (100 g. ai.ha -1 ), 2,4-D sub average dosage (200 g. ai.ha -1 ) 2,4- D under high dosage (300 g. ai.ha -1 ) sub Verdict low dose (0.625 g. ai.ha -1 ) sub Verdict average dosage (1.25 g. ai.ha -1 ) , sub Verdict high dosage (2.5 g. ai.ha - 1 ) . In addition, the following characteristics were evaluated: plant height, first ear growth, stem diameter , ear length , number of rows per cob, cob diameter , , percentage of grains on the cob , mass of plant dry matter, and yield. The results showed that all the treatments showed no statistical difference, the maize was not affected with sub doses of herbicides applications under the field and weather conditions in which the experiment was conducted.
Resumo:
Corn cultivation is part of crop rotation used by irrigation farmers from the southwestern region of São Paulo state, Brazil, who use no-tillage soil management as a kind of sustainable use of soil. The effect of this conservative practice on physical and hydrical properties of the soil, root development and corn crop yield compared to the conventional management was the objective of this work. The experiment was held at the Buriti-Mirim Farm, Angatuba, SP, Brazil, using an irrigated area with a center pivot system and two types of soil management: conventional and no-tillage systems. Although the no-tillage management had higher soil density and less water availability, no significant difference was found for both management systems concerning soil resistance to penetration, root development and crop yield. In both systems of soil management, 90% of roots were concentrated in the first 0-20cm of soil layer.
Resumo:
Forage sorghum can be grown in areas and environmental conditions dry and warm, where the productivity of other forage plants can often be uneconomical. The soil disturbance can be made only on the lines of planting (direct seeding) or entirely from the area for seeding (conventional tillage), as plowing, harrowing, subsoiling and chiseling (minimum tillage). The displacement speed ideal for planting is one in which the groove is opened and closed without removing the over-ground, allowing the distribution of seed spacing and depth constant. The experiment was conducted in a soil classified as Typic Oxisol at Lageado Experimental Farm, Faculty of Agronomic Sciences, UNESP, Botucatu campus. This study aimed to evaluate the response of sorghum in four forward speeds (3, 5, 6 and 9 km h-1) and four systems of soil management: SD (direct seeding), GP (harrow + sowing), LPG (disc harrow and two light disking + sowing) and CR (scarification and seeding). Data was subjected to analysis of variance in a factorial 4 x 4 and a randomized block design with split plots. The following parameters were determined: average speed, average strength of the drawbar, the average power drawbar, theoretical field capacity of the tractor-equipment, fuel consumption per hour. For the conditions under which the experiment was conducted, it was concluded that the hourly fuel consumption was not influenced by tillage systems and was inversely proportional to the increase of speed work, and that the change of speed in the sowing operation did not provide additional the values of average traction force on the bar of the tractor-planter.
Resumo:
Soil bulk density is an attribute often used to characterize soil physical structure, being an indicator of soil compaction. The objective of this study was to compare the values of bulk density measured by the paraffin sealed clod and volumetric ring methods in conventional, no-tillage and minimum tillage systems on a Dystroferric Red Nitosol, clayey, in Botucatu, SP. The experiment design was a 3x2 factorial arrangement in randomized block with four replications. The density values obtained by the paraffin sealed clod method were statistically higher than those obtained by the volumetric ring method. There was no difference between the managements when comparing the values of soil density obtained by the paraffin sealed clod method. The soil under conventional management showed lower density when comparing the values of soil density obtained by the volumetric ring. The volumetric ring method was more sensitive to show differences between the management systems than the paraffin sealed clod method.
Resumo:
A qualidade física do solo é um dos fatores determinantes da sustentabilidade agronômica, econômica e ambiental no sistema plantio direto (SPD). A compactação do solo tem sido apontada como um dos fatores de redução da qualidade física em solos sob SPD. Contudo, com a utilização do SPD, pode haver o incremento de matéria orgânica do solo e o desenvolvimento de um sistema poroso contínuo e estável, que atenuam os impactos negativos da compactação. O objetivo deste trabalho foi avaliar a qualidade física de um Latossolo Vermelho distroférrico sob SPD durante 30 anos, utilizando o intervalo hídrico ótimo (IHO) e o grau de compactação do solo (GC). Em uma área comercial com histórico de altas produtividades sob SPD, foram coletadas amostras de solo com estrutura preservada e deformada, para determinação da densidade do solo (Ds), do IHO e do GC. As amostras com estrutura preservada foram obtidas em três posições, relativas às linhas (L), entrelinhas (E) e posição intermediária entre as linhas e entrelinhas (PI) da cultura do milho. Foram determinadas as curvas de retenção de água e resistência do solo à penetração, bem como a Ds. A amostra de solo com estrutura deformada foi usada para obter a curva de compactação, utilizando o teste de Proctor. A Dmax foi obtida a partir da curva de compactação, e o GC foi determinado pela razão entre a Ds e a Dmax. Independentemente dos limites críticos de resistência à penetração (RP), verifica-se redução do IHO com o aumento da Ds. Os maiores valores do IHO foram verificados na posição de amostragem L, e a utilização de RP crítica maior que 2,0 MPa resultou em IHO condizente com a qualidade física desse solo sob SPD de longo tempo. A Dmax foi de 1,52 kg dm-3, e o GC variou de 64 a 87 %, sendo os maiores valores obtidos nas posições E e PI. Os valores de IHO e GC obtidos neste estudo indicam que a qualidade física desse solo não é limitante à produção das culturas após 30 anos de utilização do SPD.
Resumo:
The use of cover crops affects the support capacity of soil and least limiting water range to crop growth. The objective of this study was to quantify preconsolidation pressure (sigma(p)), compression index (CI) and least limiting water range (LLWR) of a reclaimed coal mining soil under different cover crops, in Candiota, RS, Brazil. In the experiment, with randomized blocks design and four replicates, the following cover crops (treatments) were evaluated: Hemarthria altissima (Poir.) Stapf & C.E. Hubbard, treatment 1 (T1), Paspalum notatum Flugge, treatment 4 (T4), Cynodon dactilon (L) Pers., treatment 5 (T5), control Brachiaria brizantha (Hochst.) Stapf, treatment 7 (T7) and without cover crop treatment 8 (reference treatment, T8). Soil compression and least limiting water range were evaluated with undisturbed samples at a depth of 0.00-0.05 m. In order to evaluate parameters of soil compressibility, the soil samples were saturated with water and subjected to -10 kPa matric potential and then submitted to a uniaxial compression test under the following pressures: 25, 50, 100, 200, 400, 800 and 1600 kPa. Cover crops decreased the preconsolidation pressure of constructed soils after coal mining and the greatest soil reclamation was obtained with the H. altissima cover crop, where the lowest degree of soil compactness and soil load capacity were observed. Soils cultivated under H. altissima or B. brizantha presented the highest least limiting water range and these two cover crops generated similar soil critical bulk density obtained by least limiting water range and soil load support capacity. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
El proceso de "agriculturización" se define como el uso creciente y continuo de tierras para cultivos agrícolas en lugar de usos ganaderos o mixtos. El objetivo del trabajo fue evaluar el efecto de diez años de agricultura continua bajo siembra directa (SD) y labranza convencional (LC) con diferente historia previa, sobre propiedades físicas y bioquímicas en la capa arable de un Paleudol Petrocálcico. En un ensayo de larga duración y en una situación no disturbada (parque) se evaluaron densidad aparente (DAP), resistencia a la penetración (RP), estabilidad estructural (EE) y carbono orgánico total, particulado (COP) y, asociado a la fracción mineral (COA). La DAP no difirió entre labranzas ni entre historias, ni tampoco entre los tratamientos y el parque. La RP fue mayor bajo SD respecto de LC. La SD presentó mayor EE en comparación con LC y en el parque esta fue mayor respecto de los tratamientos. El contenido de COP fue superior en la condición no disturbada y no hubo diferencias debidas a historia previa o a labranzas. Luego de diez años de implementada la SD, no se observaron mejoras significativas respecto de LC. La agricultura continua, independientemente del sistema de labranza empleado, originó compactación y pérdida de EE.
Resumo:
La calidad del suelo es una herramienta de evaluación que puede facilitar la adaptación de prácticas de manejo que promuevan sistemas agropecuarios sostenibles. La investigación de este trabajo se inició con un diagnóstico participativo en 12 comunidades rurales de la provincia de Las Tunas en el año 2009 en el cual los productores identificaron los puntos críticos de calidad de los suelos de la región y sirvieron de punta de partida para seleccionar las variables físicas, químicas y biológicas a determinar en cinco sistemas de uso agropecuario (arboleda, pasto natural, pasto cultivado y dos sistemas silvopastoriles) en la zona La Veguita, municipio Las Tunas. El sistema arboleda se utilizó como referencia de las propiedades naturales del suelo. El pasto natural se distingue por el desarrollo de especies de baja productividad, sin embargo el pasto cultivado está representado por Pennisetum purpureum vc CUBA CT-115, y constituye una contribución a la tecnología de bancos de biomasa, para utilizarse en el pastoreo durante la seca. Los sistemas silvopastoriles están representados por Leucaena leucocephala Lam. en franjas y Panicum maximun vc. Likoni, los que se diferencian en su diseño, manejo y propiedades mineralógicas. El objetivo fundamental fue valorar indicadores de calidad de los suelos Luvisoles háplicos sobre granitoides, para diseñar e implementar tecnologías de manejo que permitan incrementar la capacidad agroproductiva de los suelos. Mediante el análisis de componentes principales se obtuvo un conjunto mínimo de indicadores físicos, químicos y biológicos que proporcionaron información útil referente a los procesos edáficos y se integraron para determinar un índice de calidad. En el sistema de uso, caracterizado por el pasto cultivado (Pennisetum purpureum) se estableció, en parcelas experimentales, un ensayo de corta duración, en el que se comparó el laboreo tradicional y el laboreo sin inversión del prisma, con y sin aplicación de compost. En ambos sistemas de labranza se evaluó el desarrollo del cultivo e indicadores de calidad del suelo. Los resultados mostraron que del conjunto de indicadores edáficos estudiados se seleccionaron 6 en los que la capacidad de intercambio catiónico, materia orgánica, potasio intercambiable, contenido de arena, densidad aparente y biomasa de lombrices explicaron la mayor variabilidad y sirvieron de base para evaluar la calidad de estos suelos. Se establecieron valores umbrales de referencia de indicadores de calidad, que permitirán evaluar y monitorear los sistemas de uso y manejo de la región. El sistema Silvopastoril 2 resultó el de mayor índice de calidad de los suelos tomando como referencia la arboleda por su condición natural. El manejo silvopastoril influyó predominantemente en mejores resultados productivos pero las características edáficas principalmente físicas, deben definir su diseño y manejo. El sistema de pastos cultivados con Pennisetum purpureum vc CUBA CT 115, alcanzó la mayor acumulación de carbono orgánico, sin embargo, el manejo limitó su calidad física y el funcionamiento productivo del sistema. De manera general los sistemas de uso no garantizan un índice de la calidad del suelo, puesto que se ve afectado por las propiedades edáficas y las prácticas de manejo. En el ámbito biológico, las lombrices constituyeron los organismos más numerosos con predominio en los sistemas silvopastoriles y arboleda. Los valores superiores de densidad y biomasa de oligoquetos y mayor diversidad de otros individuos de la macrofauna, indican que la presencia de árboles en los pastizales de gramínea potencia y diversifican las comunidades de macroinvertebrados del suelo. El sistema de labranza sin inversión del prisma propicia una mejor calidad física del suelo, manteniendo el carbono e incrementando los rendimientos del Penisetum purpureum cv CUBA CT 115. La labranza tradicional, a base de aradura y grada, afecta a los contenidos de materia orgánica en el corto plazo y mantiene capas compactas en el horizonte subyacente, además influye desfavorablemente al flujo del aire, agua y al desarrollo radical de los pastos. La aplicación de compost favoreció mejores resultados productivos en ambas tecnologías de manejo. Los resultados alcanzados recomiendan la implantación de tecnologías de manejo conservacionistas y la aplicación de materiales orgánicos que restituyan los elementos nutricionales requeridos por los pastos, por lo que no se justifica la continuidad del uso de prácticas tradicionales de laboreo con inversión del prisma que se realizan actualmente. ABSTRACT The soil quality is an assessment tool, which could facilitate the adaptation of management practices that promote sustainable agricultural systems. The present investigation was carried out with a participatory diagnostic in twelve rural communities from Las Tunas province in 2009, in which producers identified the critical soil quality points of region and served as a starting point to select the physical, chemical and biological variables, in order to determine on five agricultural used systems (grove, natural grass, cultivated grass and two silvopastoral systems) in La Veguita zone from municipality Las Tunas. The system grove was used as reference of natural soil properties. The natural grass is distinguished by the development of low-productivity species, however the cultivated grass is represented by Pennisetum purpureum vc CUBA CT-115, and is a contribution to the biomass banks technology, in order to use in grazing during the dry season. The silvopastoral systems are represented by Leucaena leucocephala Lam. in stripes and Panicum maximum cv. Likoni, which differ in their design, handling and mineralogical properties. The main aim of this study was to assess the quality indicators for haplic Luvisols on granitoids for designing and implementing management technologies in order to increase the agroproductive capacity of soils. A minimal set of physical, chemical and biological indicators by Principal Component Analysis was obtained, which provided some useful information regarding soil processes and their integration for determining an index of quality. In the use system, characterized for the cultivated grass (Pennisetum purpureum) a short term assay in experimental plots was established, where the traditional and prism without inversion tillage were compared with and without compost application. In both tillage systems were evaluated the crop development and soil quality indicators. The results showed that the studied soil indicators set, six were selected, specifically the ones with exchangeable cationic capacity, organic matter, interchangeable potassium, sand content, bulk density and earthworm biomass, which explained the higher variability and served as the basis for evaluating the soil quality. The Reference threshold values of quality indicators for evaluating and monitoring the use and management systems from the region were established. The silvopastoral system 2 had the highest quality soil index, taking of reference the grove system for its natural condition. The silvopastoral management influenced on better productive results, but the soil characteristics, particularly the physical properties to be defined its design and management. However, the cultivated grass system with Pennisetum purpureum vc CUBA CT 115, reached the greatest accumulation of organic carbon. However, the management limited its physical quality and productive performance of the system. In addition, the use systems do not guarantee an index of soil quality, since it is affected by soil properties and management practices. From the biological aspect, the earthworms are the most numerous organisms on the silvopastoral systems and grove. The higher values of oligochaetes biomass and density and the greater diversity of other organisms from macrofauna indicate that the tree presence on the pasture grasses allows enhancing and diversifying soil macro invertebrate communities. The non-inversion prism tillage system provides a better physical quality of soil, maintaining the carbon content and increasing the yields of Penisetum purpureum vc CUBA CT 115. The traditional tillage, using the plowing and harrowing affects the organic matter content in a short term and keeps on compact layers of underlying horizon, and adversely affects the air and water flow, and pasture radical development. The compost application favored the best production results in both management technologies. The results obtained recommend the implementation of conservation management technologies and the application of organic materials that restore the nutritional elements required by the pasture, so it does not justify the continued use of traditional tillage practices with prism investment that are currently being made.
Resumo:
El trabajo se desarrolló en tres etapas de investigación, las dos primeras fueron realizadas en la Unidad Básica de Producción Cooperativa “El Palmar” perteneciente a la Empresa de Cultivos Varios "Paquito Rosales Benítez" del municipio de Yara, provincia de Granma, Cuba, el cual se llevó a cabo en el período de abril de 2005 a enero de 2008; y de noviembre de 2012 a febrero de 2013 respectivamente; la tercera se ejecutó de mayo a junio de 2013 en un canal de suelo ubicado en la nave de maquinaria del Departamento de Ingeniería Rural de la Universidad Politécnica de Madrid. En la primera etapa se evaluaron los conjuntos tractor-apero que intervienen en la realización de cuatro sistemas de labranza para el cultivo de la yuca, variedad Enana Rosada. Los sistemas de laboreo fueron: T1, labor de aradura (alzado) con un arado de discos seguidas de un pase de grada de discos un pase cruzado de un escarificador y un pase con una grada de discos (5 labores); T2, laboreo mínimo que comprende una labor profunda con un escarificador con saetas seguido por una labor de grada de discos (2 labores); T3, laboreo mínimo en el que se realizaron dos pases cruzados con escarificador y una labor de fresado con una fresadora de eje horizontal (3 labores) y; T4, dos labores cruzadas con la grada de discos seguidas por otras dos pases cruzados con el escarificador y una última labor con la grada de discos (5 labores). Se realizaron cinco observaciones de la jornada laboral para cada uno de los conjuntos tractorapero de cada sistema de laboreo en tres campañas, evaluando el consumo de combustible, las diferentes productividades, los índices y coeficientes tecnológicos y de explotación, el rendimiento del cultivo el balance energético del mismo, y la emisión de CO2 equivalente. En la segunda etapa se determinó la fuerza de tiro requerida por un órgano de trabajo de un escarificador con saetas en condiciones de campo, en tres profundidades (15, 25 y 35 cm) y a cuatro velocidades de trabajo (1,30; 1,49; 1,65 y 2,32 m s-1). En la tercera etapa se determinaron las fuerzas horizontales y verticales en una maqueta experimental de un órgano de trabajo de un escarificador con saetas (1:5 del tamaño real del apero) en cuatro contenidos de humedad (60, 90, 120 y 150 g kg-1), tres densidades del suelo (1,1; 1,2 y 1,3 Mg m-3) y una velocidad de 40 mm s-1. Se comparan los resultados del apero a tamaño real y la maqueta experimental. Los mejores resultados relacionados con los indicadores evaluados a la maquinaria correspondieron al sistema de laboreo mínimo T2, el cual presenta la mejor productividad por hora de tiempo limpio (1,34 ha h-1) y de tiempo operativo (1,27 ha h-1), con diferencias significativas respecto al resto de los sistemas de labranza evaluados; así como el menor consumo de combustible (32,4 L ha-1) y el mejor comportamiento energético, con diferencias significativas respecto a las demás, resultando inferior en un 63, 30 y 58 % con relación a T1, T3 y T4. La fuerza de tiro del órgano de trabajo del escarificador con saetas se incrementa con la densidad del suelo y con la profundidad, y velocidad de trabajo. Las fuerzas horizontales y verticales de la maqueta se incrementan linealmente con la densidad y humedad del suelo. Existe una relación lineal entre las fuerzas de tiro y horizontales medidas en el apero real y en el apero a escala con el contenido de humedad del suelo. ABSTRACT The work was developed in three stages of research, the first two were conducted in the Basic Unit of Cooperative Production "El Palmar" belonging to the agricultural farm "Paquito Rosales Benitez" in the municipality of Yara, Granma Province, Cuba, the which was conducted in the period from April 2005 to January 2008 and November 2012 and February 2013 respectively, the third from May to June 2013 on a soilbin located in the ship's machinery of Rural Engineering Department of the Technical University of Madrid. In the first stage were evaluated tractor-implement sets involved in the completion of four tillage systems for cassava, Pink Dwarf variety. Tillage systems were: T1, plowing (elevation) with a disk plow followed by a pass of disc harrow, a cross of scarifier and a pass with a disc harrow (5 labours), T2, minimum tillage comprising a deep work with a scarifier with a bolt followed by a disc harrow work (two labours); T3, minimum tillage which two crossed passes performed with scarifier and milling labour with a horizontal axis milling machine (three labours) and, T4, two crossed labours with disc harrow followed by two crossed passes with the scarifier and a final labour with disc harrow (5 labours). Five observations of the working day for each tractor-implement sets of each tillage system in three seasons were performed, evaluating fuel consumption, different productivities, indexes and technological and operational factors, the crop yield energy balance and the emission of CO2 equivalent. In the second stage we determined the draft force required by a working body of a scarifier with bolt under field conditions at three depths (15, 25 and 35 cm) and four operating speeds (1.30, 1.49 , 1.65 and 2.32 m s-1). In the third stage were determined horizontal and vertical forces on an experimental model of a working body of a scarifier with bolt (1:5 real scale of the implement) in four moisture contents (60, 90, 120 and 150 g kg -1), three soil densities (1.1, 1.2, and 1.3 Mg m-3) and a speed of 40 mm s-1.The results of real scale implement the experimental model were compared. The best results related to evaluated machinery indicators corresponded to T2 minimum tillage system, which presents the best productivity per hour clean time (1.34 ha h-1) and operating time (1.27 ha h-1), with significant differences compared to other tillage systems evaluated; as well as lower fuel consumption (32.4 L ha-1) and the best energy performance, with significant differences from the other, resulting lower by 63, 30 and 58% compared to T1, T3 and T4. The draft force of the working body of the scarifier with bolt increases with soil density and depth, and speed of work. The horizontal and vertical forces of the model increase linearly with density and soil moisture. A linear relationship exists between the shot and horizontal forces measured at the real implement and scale implement with the soil moisture content.
Resumo:
Entre os vários fatores que contribuem para a produção de uma cultura de milho, a distribuição vertical dos semeadores avaliada através da localização da semente em profundidade é um fator-chave, especialmente na técnica de sementeira direta. Simultaneamente, dada a complexidade dos ecossistemas naturais e agrícolas em sistemas de agricultura de conservação, a gestão diferenciada e localizada das parcelas assume um importante papel na análise e gestão da variabilidade das propriedades do solo e estabelecimento das culturas, nomeadamente utilizando informação geo referenciada e tecnologia expedita. Assim, o principal objetivo desta Tese foi a avaliação em culturas de milho da variabilidade espacial da localização de semente em profundidade e estabelecimento da cultura em sementeira direta usando sistemas convencionais de controlo de profundidade, tendo-se comparado com diferentes sistemas de mobilização e recorrendo a tecnologias de agricultura de precisão. Os ensaios decorreram na região Mediterrânea do Alentejo, em propriedades agrícolas no decorrer das campanhas de 2010, 2011, 2012 e 2015 em 6 diferentes campos experimentais. O trabalho experimental consistiu em ensaios com avaliações in loco do solo e cultura, consumo de combustível das operações e deteção remota. Os resultados obtidos indicam que não só o sistema de mobilização afetou a localização da semente em profundidade, como em sementeira direta a profundidade de sementeira foi afetada pelo teor de humidade do solo, resistência do solo à profundidade e velocidade da operação de sementeira. Adicionalmente observaram-se condições heterogéneas de emergência e estabelecimento da cultura afetadas por condições físicas de compactação do solo. Comparando os diferentes sistemas de mobilização, obteve-se uma significativa redução de combustível para a técnica de sementeira direta, apesar de se terem observado diferenças estatísticas significativas considerando diferentes calibrações de profundidade de sementeira Do trabalho realizado nesta Tese ressalva-se a importância que as tecnologias de agricultura de precisão podem ter no acompanhamento e avaliação de culturas em sementeira direta, bem como a necessidade de melhores procedimentos no controlo de profundidade dos semeadores pelo respetivos operadores ou ao invés, a adoção de semeadores com mecanismos ativos de controlo de profundidade. ABSTRACT Among the various factors that contribute towards producing a successful maize crop, seeders vertical distribution evaluated through seed depth placement is a key determinant, especially under a no-tillage technique. At the same time in conservation agriculture systems due to the complexity of natural and agricultural ecosystems site specific management became an important approach to understand and manage the variability of soil properties and crop establishment, especially when using geo spatial information and affording readily technology Thus, the main objective of this Thesis was to evaluate the spatial variability of seed depth placement and crop establishment in maize crops under no-tillage conditions compared to different tillage systems, using conventional seed depth control no till seeders and precision farming technologies. Trials were carried out in the Mediterranean region of Alentejo, in private farms along the sowing operations season over the years 2010, 2011, 2012 and 2015 in 6 different experimental fields. Experimental work covered field tests with in loco soil and crop evaluations, fuel operation evaluations and aerial sensing. The results obtained indicate that not only tillage system affected seed depth placement but under no till conditions seed depth was affected by soil moisture content, soil resistance to penetration and seeders forward speed. In addition uneven crop seedling and establishment depended on seed depth placement and could be affected by physical problems of compaction layers. Significant reduction in fuel consumption was observed for no till operations although significant differences observed according to different setting calibrations of seed depth control. According to the results, precision agriculture is an important tool to evaluate crops under no till conditions and seed depth mechanisms should be more accurate by the operators or is determinant the adoption of new active depth control technology to improve seeders performance.
Resumo:
The development of TDR for measurement of soil water content and electrical conductivity has resulted in a large shift in measurement methods for a breadth of soil and hydrological characterization efforts. TDR has also opened new possibilities for soil and plant research. Five examples show how TDR has enhanced our ability to conduct our soil- and plant-water research. (i) Oxygen is necessary for healthy root growth and plant development but quantitative evaluation of the factors controlling oxygen supply in soil depends on knowledge of the soil water content by TDR. With water content information we have modeled successfully some impact of tillage methods on oxygen supply to roots and their growth response. (ii) For field assessment of soil mechanical properties influencing crop growth, water content capability was added to two portable soil strength measuring devices; (a) A TDT (Time Domain Transmittivity)-equipped soil cone penetrometer was used to evaluate seasonal soil strengthwater content relationships. In conventional tillage systems the relationships are dynamic and achieve the more stable no-tillage relationships only relatively late in each growing season; (b) A small TDR transmission line was added to a modified sheargraph that allowed shear strength and water content to be measured simultaneously on the same sample. In addition, the conventional graphing procedure for data acquisition was converted to datalogging using strain gauges. Data acquisition rate was improved by more than a factor of three with improved data quality. (iii) How do drought tolerant plants maintain leaf water content? Non-destructive measurement of TDR water content using a flat serpentine triple wire transmission line replaces more lengthy procedures of measuring relative water content. Two challenges remain: drought-stressed leaves alter salt content, changing electrical conductivity, and drought induced changes in leaf morphology affect TDR measurements. (iv) Remote radar signals are reflected from within the first 2 cm of soil. Appropriate calibration of radar imaging for soil water content can be achieved by a parallel pair of blades separated by 8 cm, reaching 1.7 cm into soil and forming a 20 cm TDR transmission line. The correlation between apparent relative permittivity from TDR and synthetic aperture radar (SAR) backscatter coefficient was 0.57 from an airborne flyover. These five examples highlight the diversity in the application of TDR in soil and plant research.
Resumo:
Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.
Resumo:
The increasing advancement of agriculture makes providing adequate conditions for the growth and development of plants is the primary purpose of soil management systems. Much of the success of PD is attributed to cultural remains left by cover crops that do not require high nitrogen inputs and can thus be used to reduce nitrogen input in the agro- ecosystem. The nitrogen is one of the elements applied in agriculture, it is absorbed in higher quantities and limiting the yield of grain crops such as corn. Thus, there has been the influence of the no-till and conventional tillage combined with different crops of winter cover and bare soil when in succession to corn, on mineral nitrogen content. The experimental work was made at the experimental station of the Agronomic Institute of Paraná - Iapar. The implemented design was blocks at random split plot with three replications in factorial 6 x 2 x 3 x 5. The main plots were as treatment, beyond the bare soil, 5 winter species (ryegrass, vetch, vetch + oat, oat and radish), while in the subplots were used two tillage systems (No-till and conventional tillage). Three collections made were (before management, the urea before and after the urea), these being held in 5 depths (0-5, 5-10, 10-20, 20-40 and 40-60 cm). So a layer 0-5 cm and a que presents increased amount to NH4 + ion. The use of associated PD system in the presence of winter cover crops decreased as NO3 - losses in soil profile.
Resumo:
Soil tillage with chisel ploughing is the conventional soil management system in chestnut stands for fruit production in Northern Portugal. A study was developed to assess the effects of three soil management systems on in situ soil N mineralization dynamics, tree nutrition status and fruit productivity, in a 50-yr old chestnut stand. The treatments were: conventional tillage with a chisel ploughing twice a year (CT), no-tillage with rainfed improved pasture with leguminous and grasses plants (NIP), and no-tillage with spontaneous herbaceous vegetation - natural pasture (NP). The CT treatment showed a strong increase of the soil N mineral concentration following soil disturbance by tillage, but the cumulative net N mineralized along the year was significantly lower (51.8 kg ha-1) than in the NIP (85.1 kg ha-1) treatment. The NP treatment (65.9 kg ha-1) did not cause a reduction in the soil N mineralization when compared to the CT treatment. The mineralization rate (g mineralized N kg-1 total N) in 2004 was about 26, 30 and 38 in the treatments CT, NP and NIP, respectively. Treatments showed different soil N dynamics, the proportion of mineralized NO3--N being lower in the NP (10-48%) than in CT and NIP treatments (53-74%). Our study indicates that no-tillage systems improve the tree nutrition status and enhance productivity