De Sitter Special Relativity: Effects on cosmology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Search for pair produced fourth-generation up-type quarks in pp collisions at root s=7 TeV with a lepton in the final state

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Supergraph approach in a higher-order linear delta expansion calculation of the effective potential for F-type broken supersymmetry

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Use of a carbon paste electrode modified with spinel-type manganese oxide as a potentiometric sensor for lithium ions in flow injection analysis

A potentiometric sensor constructed from a mixture of 25% (m/m) spinel-type manganese oxide (lambda-MnO2), 50% (m/m) graphite powder and 25% (m/m) mineral oil is used for the determination of lithium ions in a flow injection analysis system. Experimental parameters, such as pH of the carrier solution, flow rate, injection sample volume, and selectivity for Li+ against other alkali and alkaline-earth ions and the response time of this sensor were investigated. The sensor response to lithium ions was linear in the concentration range 8.6 x 10(-5) - 1.0 x 10(-2) mol L-1 with a slope 78.9 +/- 0.3 mV dec(-1) over a wide pH range 7 - 10 (Tris buffer), without interference of other alkali and alkaline-earth metals. For a flow rate of 5.0 mL min(-1) and a injection sample volume of 408.6 muL, the relative standard deviation for repeated injections of a 5.0 x 10(-4) mol L-1 lithium ions was 0.3%.

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns

Objective: the aim of this investigation was to evaluate the cervical adaptation of metal crowns under several conditions, namely (1) variations in the cervical finish line of the preparation, (2) application of internal relief inside the crowns, and (3) cementation using different luting materials. Method and Materials: One hundred eighty stainless-steel master dies were prepared simulating full crown preparations: 60 in chamfer (CH), 60 in 135-degree shoulder (OB), and 60 in rounded shoulder (OR). The finish lines were machined at approximate dimensions of a molar tooth preparation (height: 5.5 mm; cervical diameter: 8 mm; occlusal diameter: 6.4 mm; taper degree: 6; and cervical finish line width: 0.8 mm). One hundred eighty corresponding copings with the same finish lines were fabricated. A 30-mu m internal relief was machined 0.5 mm above the cervical finish line in 90 of these copings. The fit of the die and the coping was measured from all specimens (L0) prior to cementation using an optical microscope. After manipulation of the 3 types of cements (zinc phosphate, glass-ionomer, and resin cement), the coping was luted on the corresponding standard master die under 5-kgf loading for 4 minutes. Vertical discrepancy was again measured (L1), and the difference between L1 and L0 indicated the cervical adaptation. Results: Significant influence of the finish line, cement type, and internal relief was observed on the cervical adaptation (P < .001). The CH type of cervical finish line resulted in the best cervical adaptation of the metal crowns regardless of the cement type either with or without internal relief (36.6 +/- 3 to 100.8 +/- 4 mu m) (3-way analysis of variance and Tukey's test, alpha = .05). The use of glass-ionomer cement resulted in the least cervical discrepancy (36.6 +/- 3 to 115 +/- 4 mu m) than those of other cements (45.2 +/- 4 to 130.3 +/- 2 mu m) in all conditions. Conclusion: the best cervical adaptation was achieved with the chamfer type of finish line. The internal relief improved the marginal adaptation significantly, and the glass-ionomer cement led to the best cervical adaptation, followed by zinc phosphate and resin cement.

Microscopic generalization of the standard interacting boson model Hamiltonian in the restricted dynamics approach

The evaluation of the microscopic generalized interacting boson model (GIBM) Hamiltonian, deduced from the general microscopic nuclear Hamiltonian via the collective O-A-1 invariant microscopic Hamiltonian of the general restricted dynamics model (RDM) in the case of central multipole and multipole-Gauss type effective NN-potential is briefly discussed. The GIBM version, which includes all sixth-order terms in the expansion of the collective part of the NN-potential, has been obtained. This GIBM Hamiltonian contains additional terms compared with the standard (sd-boson) interacting boson model (IBM). The microscopic expressions for the standard IBM Hamiltonian parameters in terms of the employed effective NN-potential parameters have also been obtained.

Biologia reprodutiva e crescimento do muçuã Kinosternon scorpioides (Linnaeus, 1776) em cativeiro

No presente estudo, foram obtidos dados a partir de pesquisa realizada nas dependências do Parque Zoobotânico do Museu Paraense Emí1io Goeldi durante os anos de 1992 a 1997 que tiveram como objetivo o estudo da biologia reprodutiva e do crescimento do muçuã em cativeiro. Foram verificadas as relações biométricas e o dimorfismo sexual entre machos e fêmeas adultas, o tipo de reprodução, o número de ovos por postura, o período de incubação e o percentual de eclosão, a relação entre a biometria dos ovos e dos filhotes ao nascer, a relação entre o tamanho da fêmea e seus ovos e filhotes, o crescimento biométrico e ponderal da espécie, a idade em que ocorre o dimorfismo sexual nos filhotes e a idade da primeira postura. Foram utilizados animais adultos do plantei do Parque e um grupo composto por 70 recém-nascidos. Os resultados obtidos demonstraram que os machos adultos (n= 75) possuíam a cauda longa e a cabeça pigmentada de negro e apresentaram em média 314,05 g de peso, 14,79 em de comprimento de carapaça, 9,79 cm de largura de carapaça, 12,3 cm de comprimento de plastrão, 7,46 cm de largura de plastrão e 4,5 cm de altura. As fêmeas adultas (n= 176) tinham a cauda curta e a cabeça amarela, apresentaram em média 430,08 g de peso, 15,26 cm de comprimento de carapaça, 11,31 cm de largura de carapaça, 13,35 cm de comprimento de plastrão, 8,01 cm de largura de plastrão e 5,51 cm de altura, para todas as variáveis estudadas houve diferenças significativas, sendo as fêmeas adultas maiores que os machos adultos. O período de acasalamento abrangeu os meses de abril a agosto, caracterizando uma reprodução sazonal. A nidificação ocorreu entre os meses de maio a setembro e dividiu-se nas fases de deambulação, abertura da cova, postura dos ovos, fechamento da cova e abandono do ninho. Não houve variação no número de ovos entre posturas de fêmeas jovens e adultas. Em média a postura de fêmeas adultas foi de 2,45 ovos com variação de 01 a 07 ovos, e de 2,7 ovos para fêmeas jovens, com variação de 02 a 07 ovos por postura. Porém, as fêmeas adultas realizaram posturas de ovos com maior peso, comprimento e largura do que as de fêmeas jovens. Os ovos tinham o formato alongado, de cor rosa com uma mancha branca no centro, e a casca era dura e lisa (n=701). Em média, apresentaram 9,6 g de peso, 3,8 cm de comprimento e 2,0 cm de largura. O período de incubação foi em média de 136 dias, com variação de 111 a 164 (n= 426) com média de eclosão de 86,61 %. O peso, a largura da carapaça e a largura do plastrão da fêmea foram determinantes do peso e largura do ovo, assim como o peso e a largura do ovo foram determinantes do peso, comprimento de carapaça e plastrão e largura do plastrão do recém-nascido. Os filhotes (n= 887) nasceram com peso médio de 6,5 g, 3,1 cm de comprimento da carapaça, 2,2 cm de largura da carapaça, 2,7 cm de comprimento do plastrão, 1,8 cm de largura do plastrão e 1,6 cm de altura da carapaça. O peso, largura da carapaça, o comprimento do plastrão, largura do plastrão e a altura do casco da fêmea foram determinantes do peso, da largura da carapaça e da altura do casco do recém-nascido. Aos 22,49 meses de idade apareceram os primeiros sinais de dimorfismo sexual A espécie apresentou uma correlação positiva entre o peso vivo com as mensurações biométricas de comprimento, largura e altura até os 37,95 meses de idade, após esta idade o peso vivo continuou aumentando enquanto que a taxa de aumento no comprimento foi bem mais suave. Aos 37,94 meses o desvio padrão do peso vivo foi o maior observado em todas as idades, provavelmente como resultado do dimorfismo sexual já presente nesta idade. Nessa idade foi observada a Ia postura do grupo que apresentava em média 11,84 cm de comprimento de carapaça. Aos 47,02 meses o grupo apresentou em média 410,9 g de peso e 14,15 cm de comprimento de carapaça, valores semelhantes aos encontrados nos animais adultos estudados.

Morphological traits and type of dairy goats registered in Brazil from 1976 to 2009

Data from 2439 goats of the Saanen, Alpine, Anglo Nubian and Toggenburg breeds recorded from 1976 to 2009 by the Association of Goats and Sheep Breeders of Minas Gerais were used in principal component analysis. After consistency of data, six morphological variables (thorax perimeter, body length, withers height, height, width and length of the rump) and 12 variables related to breed standard score and fitness (breed characteristic, head, palette and topline, feet and legs, dairy type, body capacity, udder, rear and front ligament, udder texture, teat and final score) were analyzed. Based on the magnitude of the eigenvalue (lower than 0.7), eleven variables considered redundant were discarded, resulting in reduced costs of technician labor to evaluate the animals. Maintenance of records on height, length, rump width, breed characteristic, dairy type, front ligament and udder texture is recommended.

Adherence to standard precautions from the standpoint of the Health Belief Model: the practice of recapping needles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Elevated micronucleus frequency in patients with type 2 diabetes, dyslipidemia and periodontitis

The over-production of reactive oxygen species (ROS) can cause oxidative damage to a large number of molecules, including DNA, and has been associated with the pathogenesis of several disorders, such as diabetes mellitus (DM), dyslipidemia and periodontitis (PD). We hypothesise that the presence of these diseases could proportionally increase the DNA damage. The aim of this study was to assess the micronucleus frequency (MNF), as a biomarker for DNA damage, in individuals with type 2 DM, dyslipidemia and PD. One hundred and fifty patients were divided into five groups based upon diabetic, dyslipidemic and periodontal status (Group 1 - poor controlled DM with dyslipidemia and PD; Group 2 - well-controlled DM with dyslipidemia and PD; Group 3 - without DM with dyslipidemia and PD; Group 4 - without DM, without dyslipidemia and with PD; and Group 5 - without DM, dyslipidemia and PD). Blood analyses were carried out for fasting plasma glucose, HbA1c and lipid profile. Periodontal examinations were performed, and venous blood was collected and processed for micronucleus (MN) assay. The frequency of micronuclei was evaluated by cell culture cytokinesis-block MN assay. The general characteristics of each group were described by the mean and standard deviation and the data were submitted to the Mann-Whitney, Kruskal-Wallis, Multiple Logistic Regression and Spearman tests. The Groups 1, 2 and 3 were similarly dyslipidemic presenting increased levels of total cholesterol, low density lipoprotein cholesterol and triglycerides. Periodontal tissue destruction and local inflammation were significantly more severe in diabetics, particularly in Group 1. Frequency of bi-nucleated cells with MN and MNF, as well as nucleoplasmic bridges, were significantly higher for poor controlled diabetics with dyslipidemia and PD in comparison with those systemically healthy, even after adjusting for age, and considering Bonferroni's correction. Elevated frequency of micronuclei was found in patients affected by type 2 diabetes, dyslipidemia and PD. This result suggests that these three pathologies occurring simultaneously promote an additional role to produce DNA impairment. In addition, the micronuclei assay was useful as a biomarker for DNA damage in individuals with chronic degenerative diseases.

In vitro performance of a pen-type laser fluorescence device and bitewing radiographs for approximal caries detection in permanent and primary teeth

To evaluate the performance of a pen‑type laser fluorescence device (DIAGNOdent 2190; LFpen, KaVo, Germany) and bitewing radiographs (BW) for approximal caries detection in permanent and primary teeth. Materials and Methods: A total of 246 anterior approximal surfaces (102 permanent and 144 primary) were selected. Contact points were simulated using sound teeth. Two examiners assessed all approximal surfaces using LFpen and BW. The teeth were histologically assessed for the reference standard. Optimal cut‑off limits were calculated for LFpen for primary and permanent teeth. Sensitivity, specificity, accuracy and area under the receiver operating characteristic curve (Az) were calculated for D1 (enamel and dentin lesions) and D3 (dentin lesions) thresholds. The reproducibility was assessed by intraclass correlation coefficient (ICC) and Cohen's weighted kappa values. Results: For permanent teeth, the LFpen cut‑off were 0– 27 (sound), 28– 33 (enamel caries) and >33 (dentin caries). For primary teeth, the LFpen cut‑off were 0– 7 (sound), 8– 32 (enamelcaries) and >32 (dentin caries). The LFpen presented higher sensitivity values than BW for primary teeth (0.58 vs. 0.32 at D1 and 0.80 vs. 0.47 at D3) and permanent teeth (0.80 vs. 0.57 at D1 and 0.94 vs. 0.51 at D3). Specificity did not show a significant difference between the methods. Rank correlations with histology were 0.59 and 0.83 (LFpen) and 0.36 and 0.70 (BW) for primary and permanent teeth, respectively, considering all lesions. ICC values for LFpen were 0.71 (inter) and 0.86 (intra) for permanent teeth and 0.94 (inter) and 0.90/0.99 for primary teeth. Kappa values for BW were 0.69 (inter) and 0.68/0.90 (intra) for permanent teeth and 0.64 (inter) and 0.89/0.89 for primary teeth. Conclusion: LFpen presented better reproducibility for primary and permanent teeth and higher accuracy in detecting caries lesions at D1 threshold than BW for permanent teeth. LFpen should be used as an adjunct method for approximal caries detection.

Comparison between noninvasive mechanical ventilation and standard oxygen therapy in children up to 3 years old with respiratory failure after extubation: a pilot prospective randomized clinical study

Objectives: The effectiveness of noninvasive positive-pressure ventilation in preventing reintubation due to respiratory failure in children remains uncertain. A pilot study was designed to evaluate the frequency of extubation failure, develop a randomization approach, and analyze the feasibility of a powered randomized trial to compare noninvasive positive-pressure ventilation and standard oxygen therapy post extubation for preventing reintubation within 48 hours in children with respiratory failure.Design: Prospective pilot study.Setting: PICU at a university-affiliated hospital.Patients: Children aged between 28 days and 3 years undergoing invasive mechanical ventilation for greater than or equal to 48 hours with respiratory failure after programmed extubation.Interventions: Patients were prospectively enrolled and randomly assigned into noninvasive positive-pressure ventilation group and inhaled oxygen group after programmed extubation from May 2012 to May 2013.Measurements and Main Results: Length of stay in PICU and hospital, oxygenation index, blood gas before and after tracheal extubation, failure and reason for tracheal extubation, complications, mechanical ventilation variables before tracheal extubation, arterial blood gas, and respiratory and heart rates before and 1 hour after tracheal extubation were analyzed. One hundred eight patients were included (noninvasive positive-pressure ventilation group, n = 55 and inhaled oxygen group, n = 53), with 66 exclusions. Groups did not significantly differ for gender, age, disease severity, Pediatric Risk of Mortality at admission, tracheal intubation, and mechanical ventilation indications. There was no statistically significant difference in reintubation rate (noninvasive positive-pressure ventilation group, 9.1%; inhaled oxygen group, 11.3%; p > 0.05) and length of stay (days) in PICU (noninvasive positive-pressure ventilation group, 3 [116]; inhaled oxygen group, 2 [1-25]; p > 0.05) or hospital (noninvasive positive-pressure ventilation group, 19 [7-141]; inhaled oxygen group, 17 [8-80]).Conclusions: The study indicates that a larger randomized trial comparing noninvasive positive-pressure ventilation and standard oxygen therapy in children with respiratory failure is feasible, providing a basis for a future trial in this setting. No differences were seen between groups. The number of excluded patients was high.

Estimation of the diagnostic accuracy of the glyco-C and US9 gene-based polymerase chain reaction technique for the detection of bovine Herpesvirus type 5 DNA in decomposed brain suspension from a slaughter house using Bayesian analysis, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Type IV secretion system is not involved in infection process in citrus

The type IV secretion system (T4SS) is used by Gram-negative bacteria to translocate protein and DNA substrates across the cell envelope and into target cells. Xanthomonas citri subsp. citri contains two copies of the T4SS, one in the chromosome and the other is plasmid-encoded. To understand the conditions that induce expression of the T4SS in Xcc, we analyzed, in vitro and in planta, the expression of 18 ORFs from the T4SS and 7 hypothetical flanking genes by RT-qPCR. As a positive control, we also evaluated the expression of 29 ORFs from the type III secretion system (T3SS), since these genes are known to be expressed during plant infection condition, but not necessarily in standard culture medium. From the 29 T3SS genes analyzed by qPCR, only hrpA was downregulated at 72 h after inoculation. All genes associated with the T4SS were downregulated on Citrus leaves 72 h after inoculation. Our results showed that unlike the T3SS, the T4SS is not induced during the infection process.

Consensus Statement on Standard of Care for Congenital Myopathies

Recent progress in scientific research has facilitated accurate genetic and neuropathological diagnosis of congenital myopathies. However, given their relatively low incidence, congenital myopathies remain unfamiliar to the majority of care providers, and the levels of patient care are extremely variable. This consensus statement aims to provide care guidelines for congenital myopathies. The International Standard of Care Committee for Congenital Myopathies worked through frequent e-mail correspondences, periodic conference calls, 2 rounds of online surveys, and a 3-day workshop to achieve a consensus for diagnostic and clinical care recommendations. The committee includes 59 members from 10 medical disciplines. They are organized into 5 working groups: genetics/diagnosis, neurology, pulmonology, gastroenterology/nutrition/speech/oral care, and orthopedics/rehabilitation. In each care area the authors summarize the committee's recommendations for symptom assessments and therapeutic interventions. It is the committee's goal that through these recommendations, patients with congenital myopathies will receive optimal care and improve their disease outcome.