Biological and morphological characteristics of Schistosoma mansoni from Ribeira Valley, State of São Paulo, Brazil: I - susceptibility of Biomphalaria tenagophila snail to sympatric S. mansoni strain

In the São Paulo State, Brazil, where the Biomphalaria tenagophila is the intermediate host, the Ribeira Valley is an important endemic schistosomiasis mansoni area. During last eleven years there has been intense control measures focusing on schistosomiasis. The efforts have been concentrated in the municipalities of Pedro de Toledo and Itariri. We determined the susceptibility of B. tenagophila to sympatric strain of S. mansoni, both recently isolated from Itariri field. In 1988, this strain was isolated and maintained in the experimental model: Swiss mice - sympatric B. tenagophila. The second generation of the worm was evaluated. The snail were divided in the three groups of 60 snails each. One group was exposed to 1 miracidium and other to 10. The third group was the control. The mortality and the shedding of cercariae were checked during 78 days. After that, the positive snails were observed until they ceased to shed cercariae. The exposed molluscs showed mortality rates of 23% and 31% and infection indexes were of 8% and 60% to 1 and 10 miracidia respectively. The mortality was of 22% in the control group. The periods of shedding cercariae in the two groups were 82 and 104 days. We can conclude that B. tenagophila is an effective intermediate host to the sympatric strain of S. mansoni sympatric strain

Generalization of Wertheim's theory for the assembly of various types of rings

We generalize Wertheim's first order perturbation theory to account for the effect in the thermodynamics of the self-assembly of rings characterized by two energy scales. The theory is applied to a lattice model of patchy particles and tested against Monte Carlo simulations on a fcc lattice. These particles have 2 patches of type A and 10 patches of type B, which may form bonds AA or AB that decrease the energy by epsilon(AA) and by epsilon(AB) = r epsilon(AA), respectively. The angle theta between the 2 A-patches on each particle is fixed at 601, 90 degrees or 120 degrees. For values of r below 1/2 and above a threshold r(th)(theta) the models exhibit a phase diagram with two critical points. Both theory and simulation predict that rth increases when theta decreases. We show that the mechanism that prevents phase separation for models with decreasing values of theta is related to the formation of loops containing AB bonds. Moreover, we show that by including the free energy of B-rings ( loops containing one AB bond), the theory describes the trends observed in the simulation results, but that for the lowest values of theta, the theoretical description deteriorates due to the increasing number of loops containing more than one AB bond.

In situ NIR spectroscopy monitoring of plasmid production processes effect of producing strain, medium composition and the cultivation strategy

BACKGROUNDWhile the pharmaceutical industry keeps an eye on plasmid DNA production for new generation gene therapies, real-time monitoring techniques for plasmid bioproduction are as yet unavailable. This work shows the possibility of in situ monitoring of plasmid production in Escherichia coli cultures using a near infrared (NIR) fiber optic probe. RESULTSPartial least squares (PLS) regression models based on the NIR spectra were developed for predicting bioprocess critical variables such as the concentrations of biomass, plasmid, carbon sources (glucose and glycerol) and acetate. In order to achieve robust models able to predict the performance of plasmid production processes, independently of the composition of the cultivation medium, cultivation strategy (batch versus fed-batch) and E. coli strain used, three strategies were adopted, using: (i) E. coliDH5 cultures conducted under different media compositions and culture strategies (batch and fed-batch); (ii) engineered E. coli strains, MG1655endArecApgi and MG1655endArecA, grown on the same medium and culture strategy; (iii) diverse E. coli strains, over batch and fed-batch cultivations and using different media compositions. PLS models showed high accuracy for predicting all variables in the three groups of cultures. CONCLUSIONNIR spectroscopy combined with PLS modeling provides a fast, inexpensive and contamination-free technique to accurately monitoring plasmid bioprocesses in real time, independently of the medium composition, cultivation strategy and the E. coli strain used.

Characterization of a Trypanosoma cruzi strain isolated from a non-endemic area in Northeast Brazil

A cepa WSL (Wild São Lorenço) de T. cruzi, isolada de um cobaio proveniente de São Lorenço da Mata (Nordeste do Brasil) foi caracterizada através da análise do seu comportamento morfobiológico e perfil isoenzimático. Para o estudo do comportamento morfobiológico, tripomastigotas sanguíneos (1 x 10 5) da cepa WSL foram inoculados por via intraperitonal em camundongos albinos Swiss. Como controle a cepa Y (Tipo I) foi usada. Durante o curso da infecção os seguintes parâmetros foram analisados: parasitemia, mortalidade, morfologia dos parasitas no sangue periférico e tropismo tissular. O perfil isoenzimático foi analisado em relação às enzimas ALAT, GPI e PGM usando como controle de referência as cepas Peruana (Tipo I), 21SF (Tipo II) e Colombiana (Tipo III). A cepa WSL apresentou as seguintes características biológicas: 1) multiplicação lenta e pico parasitêmico entre 21 - 25 dias pós-infecção; 2) mortalidade de 3,3% 40 dias pós-infecção; 3) predominância de formas largas no sangue periférico e 4) miotropismo com predominante envolvimento cardíaco. A análise isoenzimática mostrou um padrão de zimodema 2 (Z2) que corresponde às cepas biológicas Tipo II. Os resultados mostram que a cepa WSL apresenta baixa virulência e patogenicidade.

Four adult hemoglobin types in one mulatto family

The studied family showed the presence of four different types of hemoglobin. The family member who gave rise to this study (=propositus) presented Hb C and the hybrid Hb CG-phila. The propositus has three children, all of which have Hb AC; none of the family members showed any clinical symptoms. The investigation of the hemoglobin arose from the finding of target red cells in a blood test done during the pre-operatory examination for lower limb varicose vein stripping. The hybrid Hb CG-phila is due to two gene pairs, each of which with individual expression, determining the synthesis and the particular type subunits. The hybrid Hb CG-phila is formed by the combination velocity of the subunits alpha2G-philabeta2; therefore the proportion of the hybrid Hb CG-phila is lower than Hb G-phila and Hb C. The identification and molecular characterization of Hb G-phila showed the position alpha268 Asn->Lys beta2 and Hb C showed alpha2beta26 Glu->Lys.

RESISTANCE TO OXAMNIQUINE OF A Schistosoma mansoni STRAIN ISOLATED FROM PATIENT SUBMITTED TO REPEATED TREATMENTS

A strain of Schistosoma mansoni (R1) was isolated from patient previously submitted to four treatments with oxamniquine, and to another one with praziquantel. The results obtained with chemotherapeutic test, by using oxamniquine in mice infected with the strains R1 and LE (standard), showed an evident resistance to the drug in worms of the strain R1. Thus, at the dose of 250 mg/kg oxamniquine, all mice (17) infected with the LE strain did not show surviving worms, whereas 12 out of 17 mice infected with the R1 strain presented surviving worms. At the dose of 200 mg/kg, the LE strain showed recovery rates of 1.06% and 20.58%, whereas the R1 strain presented 18.57% and 61.14%, for male and female worms, respectively. At the dose of 100 mg/kg, the recovery of male worms was 2.6% for the LE strain, and 29.9% for the R1 strain. At the same dose, the recovery of females did not show statistically significant differences between the two strains (LE = 76.38%, R1 = 79.12%). Praziquantel showed similar antischistosomal activity against both studied strains, when administered at the dose of 500 mg/kg

Giardia duodenalis: INTER-STRAIN VARIABILITY OF PROTEINS, ANTIGENS, PROTEASES, ISOENZYMES AND NUCLEIC ACIDS

Giardia duodenalis isolates from asymptomatic or symptomatic patients and from animals present similarities and differences in the protein composition, antigenic profile, pattern of proteases and isoenzymes, as well as in nucleic acids analysis. In the present overview, these differences and similarities are reviewed with emphasis in the host-parasite interplay and possible mechanisms of virulence of the protozoon.

Characterization of rotavirus P genotypes circulating among paediatric inpatients in Northern Brazil

Between November 1992 and August 1993, twenty-eight rotavirus-positive stool samples obtained from paediatric inpatients in Belém, Brazil, aged less than four years, were tested by RT-PCR to determine the P genotype specificities. With the exception of 7 non-diarrhoeic children, all patients were either diarrhoeic at admission or developed diarrhoea while in hospital. Rotavirus strains with the gene 4 alleles corresponding to P1B[4] and P1A[8] types (both of which bearing G2 specificity) predominated, accounting for 78.6% of the strains. While only one P2A[6] type strain - with (mixed) G1 and 4 type specificities - was detected, the gene 4 allele could not be identified in 4 (14.3%) of the strains. Most (81%) of the specimens were obtained from children during their first 18 months of life. Rotavirus strains bearing single P1B[4] type-specificity were identified in both diarrhoeic (either nosocomial, 28.6% or community-acquired diarrhoea, 28.6%) and non-diarrhoeic (42.8%) children. P1A[8] gene 4 allele, on the other hand, was detected only among diarrhoeic children, at rates of 57.1% and 42.9% for nosocomial- and- community acquired diarrhoea, respectively. Mixed P1A[8],1B[4] type infection was identified in only one case of community-acquired diarrhoea.

Comparação dos ensaios DCB e TDCB para determinação da tenacidade em tração de adesivos estruturais

O constante desenvolvimento observado nas ligações adesivas, em conjunto com as melhorias verificadas nas características dos adesivos, estão a ser traduzidos, de uma certa forma, num aumento das aplicações das ligações adesivas, assim como na variedade de aplicações. No âmbito da previsão de resistência de juntas adesivas, dois métodos de grande relevância são a Mecânica da Fratura e os Modelos de Dano Coesivo. Os Modelos de Dano Coesivo permitem a simulação da iniciação e propagação do dano, recorrendo ao Método Dos Elementos Finitos. No que concerne à Mecânica da Fratura, a previsão de resistência é geralmente feita através de uma análise energética. Independentemente da forma como é obtida, a taxa crítica de libertação de energia de deformação à tração (GIc) dos adesivos é um dos parâmetros mais importantes para a previsão da resistência das juntas. Dois dos ensaios mais utilizados são o Double Cantilever Beam (DCB) e o Tapered Double Cantilever Beam (TDCB). Este trabalho pretende determinar e comparar o valor de GIc em juntas adesivas pelos ensaios DCB e TDCB. São utilizados três tipos de adesivos com diferentes graus de ductilidade. No ensaio DCB os métodos utilizados para a determinação de GIc são: Compliance-Based Beam Method (CBBM), Corrected Beam Theory (CBT) e Compliance Calibration Method (CCM). Os métodos utilizados no ensaio TDCB são: Simple Beam Theory (SBT), Corrected Beam Theory (CBT) e Compliance Calibration Method (CCM). Os resultados obtidos apresentam concordância entre os vários métodos de cada ensaio. A discrepância de resultados é superior quando comparados os dois tipos de ensaios.

Determinação das propriedades mecânicas à tração de adesivos estruturais frágeis e dúcteis

A crescente evolução na tecnologia das juntas coladas conferiu um potencial atractivo às ligações adesivas, com aplicações nas mais variadas indústrias. Isto deve-se não só aos aspetos económicos, tais como a melhoria da cadência de produção mas também à resistência mecânica que estas proporcionam. A possibilidade de ligar facilmente materiais distintos, a distribuição mais uniforme das tensões, a melhor resistência à fadiga e a elevada capacidade de amortecimento de vibrações estão entre as principais vantagens da utilização deste tipo de ligação. Estas propriedades transformam as juntas coladas numas das preferidas no momento de seleção de meios de união. O trabalho desenvolvido nesta dissertação enquadra-se no âmbito das ligações adesivas e tem como principais objetivos a produção de uma ferramenta para a produção de provetes de adesivo, assim como a determinação das propriedades mecânicas à tração dos mesmos para testar o desempenho do molde fabricado. Para tal, utilizou-se um adesivo frágil (Araldite® AV 138), um dúctil (Araldite® 2015) e um muito dúctil (SikaForce® 7888). Paralelamente é selecionado o método mais adequado na obtenção destes provetes, designadamente escolhendo entre a moldação em molde aberto e a injeção em molde fechado. Com vista à obtenção dos provetes, foi projetado e construído um molde em aço. Recorrendo à máquina de tração Shimadzu AG – X 100, realizaram-se os respetivos ensaios de tração, para a determinação de todas as propriedades mecânicas dos adesivos. Para efeitos de comparação de resultados foram utilizados dois tipos de extensómetros, um mecânico e um ótico. Os resultados experimentais permitiram observar que a presença de vazios afetou especialmente a deformação de rotura e a tensão de rotura. Detetaram-se pequenas discordâncias, comparativamente com os estudos publicados, de algumas características mecânicas obtidas dos diversos adesivos utilizados. Constatou-se também um ligeiro desfasamento entre os valores adquiridos com os dois tipos de extensómetros utilizados.

Phage types of Salmonella Enteritidis isolated from clinical and food samples, and from broiler carcasses in Southern Brazil

272 isolates of Salmonella Enteritidis (111 isolated from frozen broiler chicken carcasses, 126 from human food and other biological materials involved in food poisoning outbreaks and 35 from different poultry materials) were selected for phage typing. From these, 111 were phage typed, 57.65% being classified as phage type 4, 32.43% as phage type 4a, 3.60% as phage type 6a and 0.90% as phage type 7, whereas 5.40% samples were not phage typeable. The predominance of phage type 4 is in agreement with the results published worldwide, and reinforces the need for studies related to the epidemiological meaning of these findings.

Human T-cell lymphotropic virus types I and II infections in a cohort of patients with neurological disorders in Belém, Pará, Brazil

Serum- and/or- cerebrospinal fluid (CSF) samples obtained from 190 patients suffering from chronic, progressive neurological disease were screened for the presence of human T-cell lymphotropic viruses type I (HTLV-I) and type II (HTLV-II) antibodies over a six-year period (1996 to 2001) in Belém, Pará, Brazil. Patients were of both sexes (male subjects, 52%) with ages ranging from 2 to 79 years (mean, 35.9). Overall, 15 (7.9%) subjects - of whom 12 (80%) were female adults - reacted HTLV-I/II-seropositive when screened by enzyme-linked immunosorbent assay (ELISA). Serum samples from 14 of these patients were also analyzed using a recombinant Western blot (WB) assay that yielded HTLV-I-, HTLV-II-, and HTLV-I/II- reactivities for 10 (71.4%), 3 (21.4%) and 1 (7.2%) of them, respectively. The yearly rates of HTLV-I/II antibodies ranged from 2.6% (2001) to 21.7% (2000), with progressively increasing seropositivities from 1998 to 2000. Altogether, walking difficulty (n = 5 subjects), spasticity (n = 4) and leg weakness (n = 3) accounted for 80% of symptoms recorded among the 15 patients whose sera had antibodies to HTLV-I/II as detected by ELISA. These findings provide evidence that both HTLV-I and HTLV-II play a role in the development of chronic myelopathy in Belém, Pará, Northern Brazil.

Strain differentiation of Trichophyton rubrum by random amplification of polymorphic DNA (RAPD)

Trichophyton rubrum is an important cause of dermatomycoses. Molecular strain typing methods have recently been developed to address questions about epidemiology and source of relapse following treatment. This report describes the application of RAPD for molecular strain differentiation of this fungus utilizing the primers 1- (5'-d[GGTGCGGGAA]-3') and 6- (5'-d[CCCGTCAGCA]-3'). A total of five RAPD patterns were observed among 10 strains of T. rubrum, with each of the primers used. We conclude that RAPD analysis using primers 1 and 6 can be used in epidemiological studies.

Persistence of Vectobac WDG and Metoprag S-2G against Aedes aegypti larvae using a semi-field bioassay in Rio de Janeiro, Brazil

Persistence of Bacillus thuringiensis var. israelensis (Vectobac WDG) and methoprene (Metoprag S-2G) was evaluated against Aedes aegypti late third instar larvae of the Rockefeller strain in a semi-field bioassay. Tests were performed in Rio de Janeiro, using containers made of plastic, iron, concrete and asbestos, placed in a shaded area. The formulations used were 0.2 g of Vectobac-WDG and 1g of Metoprag S-2G per 100 liters of water in house storage containers. Vectobac WDG was tested twice, in March and in April/May, 2002. In March (temperature ranging from 21.5 to 39.3 ºC), 70-100% mortality was observed by the 7th day and declined abruptly thereafter. No significant differences were observed among the container types. In April/May (18.6 to 34.8 ºC) mortality was higher than 70% to 30-36 days in all cases, except in the iron container (40% mortality on the 12th day). Metoprag S-2G was evaluated in April/May, 2002, and induced mortality higher than 70% up to 15 days in the plastic and iron containers and only seven days in the concrete container. In the asbestos container, maximal mortality was achieved on day one post-treatment (66%). Our results point to a low persistence of both formulations in the weather conditions of Rio de Janeiro.

Determinação da tenacidade à fratura de adesivos estruturais em modo misto pelo ensaio Single-Leg Bending

A utilização de juntas adesivas em aplicações industriais tem vindo a aumentar, em detrimento dos métodos tradicionais tais como a soldadura, brasagem e ligações aparafusadas e rebitadas. Este facto deve-se às vantagens que estas oferecem, como o facto de serem mais leves, comportarem-se bem sob cargas cíclicas ou de fadiga, a ligação de materiais diferentes e menores concentrações de tensões. Para aumentar a confiança no projeto de estruturas adesivas, é importante conseguir prever com precisão a sua resistência mecânica e respetivas propriedades de fratura (taxa crítica de libertação de energia de deformação à tração, GIC, e corte, GIIC). Estas propriedades estão diretamente relacionadas com a Mecânica da Fratura e são estimadas através de uma análise energética. Para este efeito, distinguem-se três tipos de modelos: modelos que necessitam da medição do comprimento de fenda durante a propagação do dano, modelos que utilizam um comprimento de fenda equivalente e métodos baseados no integral J. Como na maioria dos casos as solicitações ocorrem em modo misto (combinação de tração com corte), é de grande importância a perceção da fratura nesta condições, nomeadamente das taxas de libertação de energia relativamente a diferentes critérios ou envelopes de fratura. Esta comparação permite, por exemplo, averiguar qual o melhor critério energético de rotura a utilizar em modelos numéricos baseados em Modelos de Dano Coesivo. Neste trabalho é realizado um estudo experimental utilizando o ensaio Single-Leg Bending (SLB) em provetes colados com três tipos de adesivos, de forma a estudar e comparar as suas propriedades de fratura. Para tal, são aplicados alguns modelos de redução da taxa de libertação de energia de deformação à tração, GI, e corte, GII, enquadrados nos modelos que necessitam da medição do comprimento de fenda e nos modelos que utilizam um comprimento de fenda equivalente. Numa fase posterior, procedeu-se à análise e comparação dos resultados adquiridos durante a fase experimental de GI e GII de cada adesivo. A discussão de resultados foi também feita através da análise dos valores obtidos em diversos envelopes de fratura, no sentido de averiguar qual o critério de rotura mais adequado a considerar para cada adesivo. Foi obtida uma concordância bastante boa entre métodos de determinação de GI e GII, com exceção do adesivo mais dúctil, para o qual o método baseado no comprimento de fenda equivalente apresentou resultados ligeiramente superiores.