Conservation of endangered Lupinus mariae-josephae in its natural habitat by inoculation with selected, native Bradyrhizobium strains

Lupinus mariae-josephae is a recently discovered endemism that is only found in alkaline-limed soils, a unique habitat for lupines, from a small area in Valencia region (Spain). In these soils, L. mariae-josephae grows in just a few defined patches, and previous conservation efforts directed towards controlled plant reproduction have been unsuccessful. We have previously shown that L. mariae-josephae plants establish a specific root nodule symbiosis with bradyrhizobia present in those soils, and we reasoned that the paucity of these bacteria in soils might contribute to the lack of success in reproducing plants for conservation purposes. Greenhouse experiments using L. mariae-josephae trap-plants showed the absence or near absence of L. mariae-josephae-nodulating bacteria in ‘‘terra rossa’’ soils of Valencia outside of L. mariaejosephae plant patches, and in other ‘‘terra rossa’’ or alkaline red soils of the Iberian Peninsula and Balearic Islands outside of the Valencia L. mariae-josephae endemism region. Among the bradyrhizobia able to establish an efficient symbiosis with L. mariae-josephae plants, two strains, LmjC and LmjM3 were selected as inoculum for seed coating. Two planting experiments were carried out in consecutive years under natural conditions in areas with edapho-climatic characteristics identical to those sustaining natural L. mariae-josephae populations, and successful reproduction of the plant was achieved. Interestingly, the successful reproductive cycle was absolutely dependent on seedling inoculation with effective bradyrhizobia, and optimal performance was observed in plants inoculated with LmjC, a strain that had previously shown the most efficient behavior under controlled conditions. Our results define conditions for L. mariae-josephae conservation and for extension to alkaline-limed soil habitats, where no other known lupine can thrive.

Effect of the Legume Plant Host on Rhizobial Soil Population Dynamics

Rhizobium leguminosarum bv viciae (Rlv) is a soil bacterium able to establish specific root-nodule symbioses with legumes of four different genera: Pisum, Vicia, Lens and Lathyrus. Rlv isolates from nodules of any of these legumes can nodulate any of them; however, it has been shown that plants select specific rhizobial genotypes from those present in the soil (1,2). We have previously shown this at the genomic level by following a population genomics approach. Pool genomic sequences from 100 isolates from each of four plant species: P. sativum, L. culinaris, V. faba and V. sativa, show different, specific profiles at the single nucleotide polymorphism (SNP) level for relevant genes. In this work, the extent of Rlv selection from a well-characterized soil population by different legume plant hosts: P. sativum, L. culinaris, V. faba and V. sativa, after a medium-term mesocosm study is described. Direct soil isolates from each of these mesocosm studies have been tested for specific rhizobial genes (glnII and fnrN) and symbiotic genes (nodC and nifH). Different populations were characterized further by Sanger sequencing of both the rpoB phylogenetic marker gene and the symbiotic genes nodC and nifH. The distribution and size of the rhizobial population for each legume host showed changes during the medium-term mesocosm study. Particularly, a non-symbiotic group of rhizobia was enriched by all four hosts, in contrast to the symbiotic rhizobia profile, which was specific for each legume plant host.

Alleviation of Zn toxicity by low water availability

Heavy metal contamination and drought are expected to increase in large areas worldwide. However, their combined effect on plant performance has been scantly analyzed. This study examines the effect of Zn supply at different water availabilities on morpho-physiological traits of Quercus suber L. in order to analyze the combined effects of both stresses. Seedlings were treated with four levels of zinc from 3 to 150 µM and exposed to low watering (LW) or high watering (HW) frequency in hydroponic culture, using a growth chamber. Under both watering regimes, Zn concentration in leaves and roots increased with Zn increment in nutrient solution. Nevertheless, at the highest Zn doses, Zn tissue concentrations were almost twice in HW than in LW seedlings. Functional traits as leaf photosynthetic rate and root hydraulic conductivity, and morphological traits as root length and root biomass decreased significantly in response to Zn supply. Auxin levels increased with Zn concentrations, suggesting the involvement of this phytohormone in the seedling response to this element. LW seedlings exposed to 150 µM Zn showed higher root length and root biomass than HW seedlings exposed to the same Zn dose. Our results suggest that low water availability could mitigate Zn toxicity by limiting internal accumulation. Morphological traits involved in the response to both stresses probably contributed to this response.

Conventional detection methodology is limiting our ability to understand the roles and functions of fine roots

We lack a thorough conceptual and functional understanding of fine roots. Studies that have focused on estimating the quantity of fine roots provide evidence that they dominate overall plant root length. We need a standard procedure to quantify root length/biomass that takes proper account of fine roots. Here we investigated the extent to which root length/biomass may be underestimated using conventional methodology, and examined the technical reasons that could explain such underestimation. Our discussion is based on original X-ray-based measurements and on a literature review spanning more than six decades. We present evidence that root-length recovery depends strongly on the observation scale/spatial resolution at which measurements are carried out; and that observation scales/resolutions adequate for fine root detection have an adverse impact on the processing times required to obtain precise estimates. We conclude that fine roots are the major component of root systems of most (if not all) annual and perennial plants. Hence plant root systems could be much longer, and probably include more biomass, than is widely accepted.

Propagação in vitro de barueiro (Dipteryx alata Vog.)

Savannah is the second biome in biodiversity in Brazil, presenting great vegetation endemism. Dipteryx alata Vog. (Fabaceae), native from this biome, is an economically important species, with an incipient market due to the lack of commercial plantations. This highlights the need to develop and provide the basis for the domestication of this species. Thus, this study determined the best conditions for in vitro establishment, multiplication, elongation and rooting of stem tips of D. alata plantlets grown vitro. Two culture media (MS and WPM) were evaluated in different salt concentrations (25, 50, 75 and 100%) for plantlet establishment. Four concentrations of 6– Benzylaminopurine (BAP) (0, 1, 2, 3 and 4 mg L-1) amended with 0.25 mg L-1 naphthalene-acetic acid (NAA) were studied for multiplication. Simultaneous elongation and rooting were studied with four concentrations of NAA (0, 1, 2, 3 and 4 mg L-1) together with 0.5 mg L-1 IBA. The variables analyzed were: shoot length (CPA), root length (CP), fresh matter (MF), dry matter (MSC), stem diameter (DC) and number of leaves (NF), 120 days after inoculation, with the exception of number of shoots, which was evaluated in the multiplication stage only. The medium MS at the original salt concentration (100%) was effective for the in vitro establishment of E. alata, resulting in greater root length (27.65 cm) and number of leaves per plantlet (26.0). The concentration of 4 mg L-1 BAP was the best one for multiplication; however, greater concentrations can boost multiplication. The effect of NAA and IBA were noticeable on in vitro elongation and rooting, with best CPA (3.14 cm) and CR (15.84 cm). Therefore, it is possible to state that the medium MS increases the success probability of in vitro establishment of stem tips of Dipteryx alata. NAA concentrations below 3 mg L-1 were favorable for in vitro development of the species, with essential characteristics for acclimatization success|.

Rôle des nutriments dans l’enracinement et le rendement en fruits chez la chicouté (Rubus chamaemorus)

La chicouté (Rubus chamaemorus L.) pousse naturellement dans les tourbières ombrotrophes. La culture de la chicouté dans les tourbières en fin d’exploitation serait très intéressante afin de maintenir des activités économiques sur ces sites ainsi que d’améliorer la disponibilité de ce petit fruit pour une future commercialisation. L’implantation de cette culture fait toutefois face à certains problèmes tels la faible survie des boutures au cours de la première année et un rendement fruitier très variable. Des essais de fertilisation et d’application d’auxine ont été réalisés pour augmenter la production de racines sur les boutures de rhizome au moment de la plantation afin de réduire leur mortalité. La fertilisation a permis d’augmenter la longueur des racines, mais seulement à la fin de la saison. Les fertilisants ont également stimulé la croissance des plants. Par contre, les concentrations d’auxine utilisées ont entraîné une très forte mortalité des boutures de chicouté. Aucun de ces traitements n’a permis d’augmenter la survie des boutures lors de la plantation. Afin de mieux comprendre les limitations nutritives liées aux faibles rendements fruitiers, nous avons utilisé une analyse compositionnelle (CND) nous permettant d’identifier les débalancements nutritifs. Cette analyse a montré que les parcelles moins productives sont caractérisées par une concentration foliaire plus élevée en manganèse, fer, soufre et cuivre. Les résultats de ce projet de maîtrise vont permettre d’améliorer la régie de fertilisation lors de la plantation de la chicouté en tourbière résiduelle, mais d’autres recherches doivent être menées afin de réduire la mortalité des boutures lors de la plantation.

Crescimento e desenvolvimento de Plinia cauliflora de acordo com a intensidade luminosa em clima subtropical

The jabuticaba fruit tree from classified in the Myrtaceae family and Plinia genre. There are about nine species of this fruit tree, that include as most important, Plinia trunciflora (jabuticaba de cabinho), naturally occurring in southwestern Paraná State, Brazil, P. cauliflora (jabuticaba Paulista or Jabuticaba Açu) and P. jaboticaba (Vell) (jabuticaba sabará), with all the over species producing fruit for the industry or fresh consumption. Nevertheless, there aren‟t commercial orchards with this culture, with highest yield part from extractive. This fact can be combined with lack of technical knowledge for the plants produce in the field. As these species are found in the forest, the first point is whether they can adapt to other light intensity conditions. The aim of this work was to identify the adaptive behavior of jabuticaba fruit seedling and tree when they were put in different light intensities and what this can be considered ideal for the growth, as well as, its influence in the leaves secondary compounds production. Two experiments were conducted, with the first involved with the study of the seedlings and the second with plants in the field. The work was carried out at Universidade Tecnológica Federal do Paraná – Câmpus Dois Vizinhos, Paraná State - Brazil. The experimental design was a completely randomized and a block design with four treatments and four replications of 10 seedlings or two plants per plot, according to nursery or orchard conditions, respectively. The treatments were base according to the light intensity. The treatments used were, 1 - full sun, similar the orchard condition, with 0% shading; 2 - side cover with shade cloth and top with transparent plastic, representing a gap forest condition; 3 - side and top cover with shade cloth, representing stage where the forest canopy is closing, focusing only indirect sunlight; 4 - side and top cover with shade cloth, simulating a closed canopy condition, with PPD (photon flux density) of 10% (90% shading); 5 - side and top cover with shade cloth, simulating a more open canopy condition with PPD 65% (35% shading). The growth and development seedling and plant characteristics were evaluated once by month, as also, during time part in the plants the secondary metabolites leaves, soil activity microbiological and the fresh and dry matter root and shoot and, root length from seedlings. For the growth and development of jabuticaba Açú Paulista seedling recommend to use of side cover with shade cloth and top with transparent plastic, representing a gap forest condition. In orchard, for the growth and development of plants jabuticaba Híbrida tree it was recommended the use of side and top cover with shade cloth of some type. For production of secondary metabolites of leaves, the plant must to be full sunlight condition orchard.

PRODUÇÃO DE MUDAS DE UMBUZEIRO ( Spondias tuberosa Arruda Câmara) EM DIFERENTES SUBSTRATOS E TAMANHO DE RECIPIENTES

A espécie Spondias tuberosa Arr. Cam. (umbuzeiro) destaca-se como uma das espécies arbóreas de maior potencial do semiárido brasileiro. Apesar de sua relevante importância socioeconômica e ambiental, há falta de estudos voltados para o estabelecimento de um modelo de produção de mudas da espécie. O objetivo desse trabalho foi avaliar a produção de mudas de Spondias tuberosa utilizando diferentes substratos e tamanho de recipientes. O experimento foi conduzido no viveiro do Laboratório de Ecologia Vegetal (LEV) do Centro de Ciências Agrárias (CCA) da Universidade Federal da Paraíba (UFPB), Areia - PB. O delineamento experimental usado foi em blocos casualizados em esquema fatorial 2 x 7 e parcelas subdivididas, sendo que os recipientes representaram as parcelas e os substratos as subparcelas. Foram utilizados substratos formulados a partir da mistura de terra de subsolo (37,5-100%), areia lavada (12,5- 25%) e esterco bovino curtido (10-50%). Os recipientes utilizados foram sacos de polietileno preto com volumes de 1900 cm3 (15 x 27 cm) e 5000 cm3 (25 x 26 cm). Para a obtenção das plântulas, sementes de Spondias tuberosa foram semeadas em sementeira de alvenaria até a repicagem (90 dias após o semeio). Aos 78 dias, após a repicagem, as mudas foram avaliadas quanto à altura, diâmetro do colo, relação altura/ diâmetro do colo, diâmetro do xilopódio, comprimento de raiz, massa seca da parte aérea e raiz. Os dados obtidos foram submetidos à análise de variância e ao teste F, sendo as médias comparadas pelo teste de Tukey ao nível de 5% de probabilidade, utilizando o software SISVAR®. Os substratos com esterco bovino curtido proporcionaram os maiores valores em altura e comprimento de raiz. Para a produção de mudas de Spondias tuberosa, é recomendado o substrato contendo terra de subsolo (45%) + Areia (15%) + Esterco bovino (40%).

QUALIDADE FISIOLÓGICA DE SEMENTES DE Tabernaemontana fuchsiaefolia A. DC EM FUNÇÃO DO TESTE DE ENVELHECIMENTO ACELERADO1

Tabernaemontana fuchsiaefolia A. DC é uma espécie da família Apocynaceae, nativa do Brasil, com característica invasora, possuindo potencial para uso em recuperação de áreas degradadas. O trabalho teve o objetivo de avaliar a influência dos métodos de envelhecimento acelerado sobre a qualidade fisiológica e germinação de sementes, utilizando-se o método tradicional e em solução de NaCl, empregando-se a metodologia de gerbox, formando minicâmaras de envelhecimento, em três temperaturas (41, 43 e 45°C) e cinco tempos de envelhecimento (0, 24, 48, 72 e 96 horas). As sementes, após o envelhecimento, foram colocadas para germinar em rolos de papel germitest, em quatro repetições de 25 sementes, em câmaras BOD a temperatura de 30°C, com fotoperíodo de 8 horas. O efeito da temperatura foi comparado pelo teste de Tukey em nível de 5% de probabilidade e o efeito do tempo de envelhecimento, pela análise de regressão. Após 35 dias, foram avaliados percentual, índice de velocidade, tempo médio e frequência da germinação, bem como comprimento de raiz e parte aérea, massa seca de plântulas e percentual de plântulas normais. Observou-se que o método alternativo de envelhecimento com solução de NaCl teve pouca influência na qualidade das sementes, não sendo indicado para testes de vigor para a espécie. O método tradicional, na temperatura de 45°C em período de envelhecimento de 96 horas, promoveu queda na germinação e pode ser utilizado para testar o vigor de sementes de leiteira.

Nitrogen requirements at bulb initiation for production of intermediate-day onions

Nitrogen requirements at bulb initiation for production of intermediate-day onions Article in Acta horticulturae · October 2016 DOI: 10.17660/ActaHortic.2016.1142.11 1st Rui Machado 16.44 · Universidade de Évora 2nd David R. Bryla 30.16 · United States Department of Agriculture Abstract Nitrogen requirements at bulb initiation for production of intermediate-day onions Authors: R.M.A. Machado, D.R. Bryla Keywords: Allium cepa, crop growth, nitrogen uptake, soil nitrate Abstract: The effect of nitrogen application on growth, nitrogen (N) uptake, yield, and quality of intermediate-day onion (Allium cepa 'Guimar') was evaluated in the field in southern Portugal. Plants were fertilized with 30 kg ha-1 N at transplanting, 10 kg ha-1 N at 29 days after transplanting (DAT) during early leaf growth, and with 0, 20, 40 and 60 kg ha-1 N at 51 DAT at the initiation of bulbing. The root system of plants in each treatment were concentrated in the top 0.1 m of soil and limited to 0.3 m depth but neither root length density nor rooting depth were affected by N application during later stages of bulb development. Leaf and bulb dry matter, on the other hand, increased linearly with N rate during bulb growth (85 DAT) and at harvest (114 DAT), respectively. Soil nitrate-N (NO3-N) at 0-0.3 m depth likewise increased linearly with N rate during bulb growth but declined from 15-30 mg kg-1 at bulbing to >10 mg kg-1 in each treatment by harvest. A substantial amount of N in the plants, which ranged from 302-525 mg, was taken up from the soil. Application of 60 kg ha-1 N resulted in luxury consumption. Yield (fresh bulb weight) increased from 0.19 kg plant-1 with no N at bulbing to as much as 0.28 kg plant-1 with 60 kg ha-1 N. Bulbs harvested from plants fertilized 40-60 kg ha-1 N averaged 8.2-8.5 cm in diameter, while those from plants with no N at bulbing averaged only 7.2 cm in diameter. Application of N fertilizer is thus recommended at bulbing to increase N uptake, yield, and bulb size of intermediate-day onions, particularly in dry Mediterranean climates where many onions are produced. Other components of quality, including neck diameter, bulb water content, total soluble solids, and juice pH, were not affect by N applied at bulbing.

Nodulation, gas exchanges and production of peanut cultivated with Bradyrhizobium in soils with different textures.

Nitrogen fertilization from biological source is an uncommon practice for peanut growers due to the limited results, mainly in environments with water restriction. In this study, the response of a commercial Bradyrhizobium was evaluated on the nodulation and production of peanuts grown in sandy and medium textured soils. Two experiments using different soils were carried out in the field during the dry season, in Campina Grande, Paraíba State, Brazil. Three peanut genotypes were submitted to the following treatments: 1-no nitrogen fertilization (control), 2- chemical fertilization (ammonium sulfate) and 3- inoculation with Bradyrhizobium [commercial strain BR 1405 (SEMIA 6144)]. A completely randomized 3x3 factorial design was adopted with five repetitions for both experiments. The evaluates variables were: height of the main stem, number of nodes/plant, root length, root dry weight, weight of pods/plant and number of pods/plant. In addition, gas exchanges were estimated using IRGA apparatus. Both genotypes (BRS Havana and L7 Bege) were benefited in relation to production due to an inoculation with SEMIA 6144. No physiological response was verified in genotypes or N-treatments to gas exchange, excepting for the Ci/Ca ratio in the medium textured soil experiment. BRS Havana showed low Ci/Ca ratio in Bradyrhizobium treatment, indicating that SEMIA 6144 improved the plants photosynthetic efficiency.

Cultivar-specific effects of pathogen testing on storage root yield of sweet potato, Ipomoea batatas (L.) Lam.

The accumulation and perpetuation of viral pathogens over generations of clonal propagation in crop species such as sweet potato, Ipomoea batatas,inevitably result in a reduction in crop yield and quality. This study was conducted at Bundaberg, Australia to compare the productivity of field-derived and pathogen-tested (PT)clones of 14 sweet potato cultivars and the yield benefits of using healthy planting materials. The field-derived clonal materials were exposed to the endemic viruses, while the PT clones were subjected to thermotherapy and meristem-tip culture to eliminate viral pathogens. The plants were indexed for viruses using nitrocellulose membrane-enzyme-linked immunosorbent assay and graft-inoculations onto Ipomoea setosa. A net benefit of 38% in storage root yield was realised from using PT materials in this study.Conversely, in a similar study previously conducted at Kerevat, Papua New Guinea (PNG), a net deficit of 36% was realised. This reinforced our finding that the response to pathogen testing was cultivar dependent and that the PNG cultivars in these studies generally exhibited increased tolerance to the endemic viruses present at the respective trial sites as manifested in their lack of response from the use of PT clones. They may be useful sources for future resistance breeding efforts. Nonetheless, the potential economic gain from using PT stocks necessitates the use of pathogen testing on virus-susceptible commercial cultivars.

Cultivar-specific effects of pathogen testing on storage root yield of sweetpotato, Ipomoea batatas.

The accumulation and perpetuation of viral pathogens over generations of clonal propagation in crop species such as sweetpotato, Ipomoea batatas, inevitably result in a reduction in crop yield and quality. This study was conducted at Bundaberg, Australia to compare the productivity of field-derived and pathogen-tested (PT) clones of 14 sweetpotato cultivars and the yield benefits of using healthy planting materials. The field-derived clonal materials were exposed to the endemic viruses, while the PT clones were subjected to thermotherapy and meristem-tip culture to eliminate viral pathogens. The plants were indexed for viruses using nitrocellulose membrane-enzyme-linked immunosorbent assay and graft-inoculations onto Ipomoea setosa. A net benefit of 38% in storage root yield was realised from using PT materials in this study. Conversely, in a similar study previously conducted at Kerevat, Papua New Guinea (PNG), a net deficit of 36% was realised. This reinforced our finding that the response to pathogen testing was cultivar dependent and that the PNG cultivars in these studies generally exhibited increased tolerance to the endemic viruses present at the respective trial sites as manifested in their lack of response from the use of PT clones. They may be useful sources for future resistance breeding efforts. Nonetheless, the potential economic gain from using PT stocks necessitates the use of pathogen testing on virus-susceptible commercial cultivars. .

Design and testing of stand-specific bucking instructions for use on modern cut-to-length harvesters

This study addresses three important issues in tree bucking optimization in the context of cut-to-length harvesting. (1) Would the fit between the log demand and log output distributions be better if the price and/or demand matrices controlling the bucking decisions on modern cut-to-length harvesters were adjusted to the unique conditions of each individual stand? (2) In what ways can we generate stand and product specific price and demand matrices? (3) What alternatives do we have to measure the fit between the log demand and log output distributions, and what would be an ideal goodness-of-fit measure? Three iterative search systems were developed for seeking stand-specific price and demand matrix sets: (1) A fuzzy logic control system for calibrating the price matrix of one log product for one stand at a time (the stand-level one-product approach); (2) a genetic algorithm system for adjusting the price matrices of one log product in parallel for several stands (the forest-level one-product approach); and (3) a genetic algorithm system for dividing the overall demand matrix of each of the several log products into stand-specific sub-demands simultaneously for several stands and products (the forest-level multi-product approach). The stem material used for testing the performance of the stand-specific price and demand matrices against that of the reference matrices was comprised of 9 155 Norway spruce (Picea abies (L.) Karst.) sawlog stems gathered by harvesters from 15 mature spruce-dominated stands in southern Finland. The reference price and demand matrices were either direct copies or slightly modified versions of those used by two Finnish sawmilling companies. Two types of stand-specific bucking matrices were compiled for each log product. One was from the harvester-collected stem profiles and the other was from the pre-harvest inventory data. Four goodness-of-fit measures were analyzed for their appropriateness in determining the similarity between the log demand and log output distributions: (1) the apportionment degree (index), (2) the chi-square statistic, (3) Laspeyres quantity index, and (4) the price-weighted apportionment degree. The study confirmed that any improvement in the fit between the log demand and log output distributions can only be realized at the expense of log volumes produced. Stand-level pre-control of price matrices was found to be advantageous, provided the control is done with perfect stem data. Forest-level pre-control of price matrices resulted in no improvement in the cumulative apportionment degree. Cutting stands under the control of stand-specific demand matrices yielded a better total fit between the demand and output matrices at the forest level than was obtained by cutting each stand with non-stand-specific reference matrices. The theoretical and experimental analyses suggest that none of the three alternative goodness-of-fit measures clearly outperforms the traditional apportionment degree measure. Keywords: harvesting, tree bucking optimization, simulation, fuzzy control, genetic algorithms, goodness-of-fit

Structure-specific nuclease activity of RAGs is modulated by sequence, length and phase position of flanking double-stranded DNA

RAGs (recombination activating genes) are responsible for the generation of antigen receptor diversity through the process of combinatorial joining of different V (variable), D (diversity) and J (joining) gene segments. In addition to its physiological property, wherein RAG functions as a sequence-specific nuclease, it can also act as a structure-specific nuclease leading to genomic instability and cancer. In the present study, we investigate the factors that regulate RAG cleavage on non-B DNA structures. We find that RAG binding and cleavage on heteroduplex DNA is dependent on the length of the double-stranded flanking region. Besides, the immediate flanking double-stranded region regulates RAG activity in a sequence-dependent manner. Interestingly, the cleavage efficiency of RAGs at the heteroduplex region is influenced by the phasing of DNA. Thus, our results suggest that sequence, length and phase positions of the DNA can affect the efficiency of RAG cleavage when it acts as a structure-specific nuclease. These findings provide novel insights on the regulation of the pathological functions of RAGs.