Construcción de repositorios institucionales open source con Software Greenstone

Se aborda la construcción de repositorios institucionales open source con Software Greenstone. Se realiza un recorrido teórico y otro modélico desarrollando en él una aplicación práctica. El primer recorrido, que constituye el marco teórico, comprende una descripción, de: la filosofía open access (acceso abierto) y open source (código abierto) para la creación de repositorios institucionales. También abarca en líneas generales las temáticas relacionadas al protocolo OAI, el marco legal en lo que hace a la propiedad intelectual, las licencias y una aproximación a los metadatos. En el mismo recorrido se abordan aspectos teóricos de los repositorios institucionales: acepciones, beneficios, tipos, componentes intervinientes, herramientas open source para la creación de repositorios, descripción de las herramientas y finalmente, la descripción ampliada del Software Greenstone; elegido para el desarrollo modélico del repositorio institucional colocado en un demostrativo digital. El segundo recorrido, correspondiente al desarrollo modélico, incluye por un lado el modelo en sí del repositorio con el Software Greenstone; detallándose aquí uno a uno los componentes que lo conforman. Es el insumo teórico-práctico para el diseño -paso a paso- del repositorio institucional. Por otro lado, se incluye el resultado de la modelización, es decir el repositorio creado, el cual es exportado en entorno web a un soporte digital para su visibilización. El diseño del repositorio, paso a paso, constituye el núcleo sustantivo de aportes de este trabajo de tesina

OJS Implementation and development of the Scientific Journals Site of the School of Humanities and Education Sciences at the Universidad Nacional de La Plata

Este trabajo tiene como objetivo describir la experiencia de implementación y desarrollo del Portal de revistas de la Facultad de Humanidades y Ciencias de Educación de la Universidad Nacional de La Plata a fin de que pueda ser aprovechada por todos aquellos que emprendan iniciativas de características similares. Para ello, se realiza en primer lugar un repaso por la trayectoria de la Facultad respecto a la edición de revistas científicas y la labor bibliotecaria para contribuir a su visualización. En segundo orden, se exponen las tareas llevadas adelante por la Prosecretaría de Gestión Editorial y Difusión (PGEyD) de la Facultad para concretar la puesta en marcha del portal. Se hace especial referencia a la personalización del software, a la metodología utilizada para la carga masiva de información en el sistema (usuarios y números retrospectivos) y a los procedimientos que permiten la inclusión en repositorio institucional y en el catálogo web de todos los contenidos del portal de manera semi-automática. Luego, se hace alusión al trabajo que se está realizando en relación al soporte y a la capacitación de los editores. Se exponen, después, los resultados conseguidos hasta el momento en un año de trabajo: creación de 10 revistas, migración de 4 títulos completos e inclusión del 25de las contribuciones publicadas en las revistas editadas por la FaHCE. A modo de cierre se enuncian una serie de desafíos que la Prosecretaría se ha propuesto para mejorar el Portal y optimizar los flujos de trabajo intra e interinstitucionales

OJS Implementation and development of the Scientific Journals Site of the School of Humanities and Education Sciences at the Universidad Nacional de La Plata

Este trabajo tiene como objetivo describir la experiencia de implementación y desarrollo del Portal de revistas de la Facultad de Humanidades y Ciencias de Educación de la Universidad Nacional de La Plata a fin de que pueda ser aprovechada por todos aquellos que emprendan iniciativas de características similares. Para ello, se realiza en primer lugar un repaso por la trayectoria de la Facultad respecto a la edición de revistas científicas y la labor bibliotecaria para contribuir a su visualización. En segundo orden, se exponen las tareas llevadas adelante por la Prosecretaría de Gestión Editorial y Difusión (PGEyD) de la Facultad para concretar la puesta en marcha del portal. Se hace especial referencia a la personalización del software, a la metodología utilizada para la carga masiva de información en el sistema (usuarios y números retrospectivos) y a los procedimientos que permiten la inclusión en repositorio institucional y en el catálogo web de todos los contenidos del portal de manera semi-automática. Luego, se hace alusión al trabajo que se está realizando en relación al soporte y a la capacitación de los editores. Se exponen, después, los resultados conseguidos hasta el momento en un año de trabajo: creación de 10 revistas, migración de 4 títulos completos e inclusión del 25de las contribuciones publicadas en las revistas editadas por la FaHCE. A modo de cierre se enuncian una serie de desafíos que la Prosecretaría se ha propuesto para mejorar el Portal y optimizar los flujos de trabajo intra e interinstitucionales

Software Design Guidelines for Usability

For years, the Human Computer Interaction (HCI) community has crafted usability guidelines that clearly define what characteristics a software system should have in order to be easy to use. However, in the Software Engineering (SE) community keep falling short of successfully incorporating these recommendations into software projects. From a SE perspective, the process of incorporating usability features into software is not always straightforward, as a large number of these features have heavy implications in the underlying software architecture. For example, successfully including an “undo” feature in an application requires the design and implementation of many complex interrelated data structures and functionalities. Our work is focused upon providing developers with a set of software design patterns to assist them in the process of designing more usable software. This would contribute to the proper inclusion of specific usability features with high impact on the software design. Preliminary validation data show that usage of the guidelines also has positive effects on development time and overall software design quality.

Radiofrequency architectures and technologies for software defined radio

Six-port network is an interesting radiofrequency architecture with multiple possibilities. Since it was firstly introduced in the seventies as an alternative network analyzer, the six-port network has been used for many applications, such as homodyne receivers, radar systems, direction of arrival estimation, UWB (Ultra-Wide-Band), or MIMO (Multiple Input Multiple Output) systems. Currently, it is considered as a one of the best candidates to implement a Software Defined Radio (SDR). This thesis comprises an exhaustive study of this promising architecture, where its fundamentals and the state-of-the-art are also included. In addition, the design and development of a SDR 0.3-6 GHz six-port receiver prototype is presented in this thesis, which is implemented in conventional technology. The system is experimentally characterized and validated for RF signal demodulation with good performance. The analysis of the six-port architecture is complemented by a theoretical and experimental comparison with other radiofrequency architectures suitable for SDR. Some novel contributions are introduced in the present thesis. Such novelties are in the direction of the highly topical issues on six-port technique: development and optimization of real-time I-Q regeneration techniques for multiport networks; and search of new techniques and technologies to contribute to the miniaturization of the six-port architecture. In particular, the novel contributions of this thesis can be summarized as: - Introduction of a new real-time auto-calibration method for multiport receivers, particularly suitable for broadband designs and high data rate applications. - Introduction of a new direct baseband I-Q regeneration technique for five-port receivers. - Contribution to the miniaturization of six-port receivers by the use of the multilayer LTCC (Low Temperature Cofired Ceramic) technology. Implementation of a compact (30x30x1.25 mm) broadband (0.3-6 GHz) six-port receiver in LTTC technology. The results and conclusions derived from this thesis have been satisfactory, and quite fruitful in terms of publications. A total of fourteen works have been published, considering international journals and conferences, and national conferences. Aditionally, a paper has been submitted to an internationally recognized journal, which is currently under review.

Desarrollo de una aplicación software para laboratorios remotos

Las prácticas en laboratorios forman una parte muy importante de la formación en todos los programas docentes. A pesar de esta importancia, la creación de un laboratorio no es una tarea fácil, ya que el hecho de equipar un laboratorio puede suponer un gran gasto económico, tanto inicial como posterior. Como solución, surge la educación a distancia, y en concreto los laboratorios virtuales, es decir, simulaciones de un laboratorio real utilizando modelos matemáticos. Por sus características y flexibilidad se han ido desarrollando laboratorios virtuales en el ámbito docente, pero no todas las áreas cuentan con tantas posibilidades o facilidades como en la electrónica. La mayoría de los laboratorios accesibles desde Internet que hay en la actualidad dentro de la enseñanza a distancia o formación online, son virtuales. El laboratorio que se ha desarrollado tiene como principal ventaja la realización de prácticas controlando instrumentos y circuitos reales de forma remota. El proyecto consiste en realizar un sistema software para implementar un laboratorio remoto en el área de la electrónica analógica, que pueda ser utilizado como complemento a las actividades formativas que se realizan en los laboratorios de los centros de enseñanza. El sistema completo también consta de un hardware controlado mediante buses de comunicación estándar, que permite la implementación de distintos circuitos analógicos, de tal forma que se pueda realizar prácticas sobre circuitos físicos reales. Para desarrollar un laboratorio lo más real posible, la aplicación que maneja el estudiante es un visor 3D. Con la utilización de un visor 3D lo que se pretende es tener un aumento de la realidad a la hora de realizar las prácticas de laboratorio remotamente. El sistema desarrollado cuenta con un sistema de comunicación basado en un modelo cliente-servidor: • Servidor: se encarga de procesar las acciones que realiza el cliente y controla y monitoriza los instrumentos y dispositivos del sistema hardware. • Cliente: sería el usuario final, que mediante un visor 3D comunica las acciones a realizar al servidor para que éste las procese. Practices in laboratories are a very important part of training in all educational programs. Despite this importance, the establishment of a laboratory is not an easy task, since the fact of equipping a laboratory can be a great economic budget, both initial and subsequent spending. As a solution, appears the education at distance (online), and in particular the virtual labs, namely simulations of a real laboratory by using mathematical models. Virtual laboratories in the field of teaching have been developed for its features and flexibility, but not all areas have so many possibilities or facilities as in electronics. The most accessible laboratories from the Internet that are currently accessible within the distance or e-learning (on-line) are virtual. The laboratory which has been developed has as a main advantage to make practices or exercises in the fact of controlling instruments and real circuits remotely. The project consists of making a software system in order to implement a remote laboratory in the area of analog electronics that can be used as a complement to the others training activities to be carried out. The complete system also consists of a controlled hardware by standard communication buses that allow the implementation of several analog circuits, in such a way that practices can control real physical circuits. To develop a laboratory as more realistic as possible, the application that manages the student is a 3D viewer. With the use of a 3D viewer, is intended to have an increase in reality when any student wants to access to laboratory practices remotely. The developed system has a communication system based on a model Client/Server: • Server: The system that handles actions provided by the client and controls and monitors the instruments and devices in the hardware system. • Client: The end user, which using a 3D viewer, communicates the actions to be performed at the server so that it will process them.

A Process Asset Library to support Software Process Improvement in Small Settings

A main factor to the success of any organization process improvement effort is the Process Asset Library implementation that provides a central database accessible by anyone at the organization. This repository includes any process support materials to help process deployment. Those materials are composed of organization's standard software process, software process related documentation, descriptions of the software life cycles, guidelines, examples, templates, and any artefacts that the organization considers useful to help the process improvement. This paper describe the structure and contents of the Web-based Process Asset Library for Small businesses and small groups within large organizations. This library is structured using CMMI as reference model in order to implement those Process Areas described by this model.

c&d-learning implementation architecture: Adapting e-learning to developing countries

From the educational point of view, the most widespread method in developing countries is on-site education. Technical and economic resources cannot support conventional distance learning infrastructures and it is even worse for courses in universities. They usually suffer a lack of qualified faculty staff, especially in technical degrees. The literature suggest that e-learning is a suitable solution for this problem, but its methods are developed attending to educational necessities of the First World and cannot be applied directly to other contexts. The proposed methodology is a variant of traditional e-learning adapted to the needs of developing countries. E-learning for Cooperation and Development (c&d-learning) is oriented to be used for educational institutions without adequate technical or human resources. In this paper we describe the c&d-learning implementation architecture based on three main phases: hardware, communication and software; e.g. computer and technical equipping, internet accessing and e-learning platform adaptation. Proper adaptation of educational contents to c&d-learning is discussed and a real case of application in which the authors are involved is described: the Ngozi University at Burundi.

A software process improvement solution for small and medium-size enterprises

The focus of this paper is to outline the main structure of an alternative software process improvement method for small- and medium-size enterprises. This method is based on the action package concept, which helps to institutionalize the effective practices with affordable implementation costs. This paper also presents the results and lessons learned when this method was applied to three enterprises in the requirements engineering domain.

Improving the capacity of software acquisition management: An Alternative methodology

The acquisition of the information system technologies using the services of an external supplier could be the the best options to reduce the implementation and maintenance cost of software solutions, and allows a company to improve the efficient use of its resources. The focus of this paper is to outline a methodology structure for the software acquisition management. The methodology proposed in this paper is the result of the study and the convergence of the weakness and strengths of some models (CMMI, SA-CMM, ISO/IEC TR 15504, COBIT, and ITIL) that include the software acquisition process.

Improvements for B.E.M. implementation in micros

This paper presents a computer program developed to run in a micro I.B.M.-P.C. wich incorporates some features in order to optimize the number of operations needed to compute the solution of plane potential problems governed by Laplace's equation by using the Boundary Integral Equation Method (B.I.E.M.). Also incorporated is a routine to plot isolines inside the domain under study.

Implementation of intelligent data acquisition system for ITER fast controllers using RIO devices.

A basic requirement of the data acquisition systems used in long pulse fusion experiments is the real time physical events detection in signals. Developing such applications is usually a complex task, so it is necessary to develop a set of hardware and software tools that simplify their implementation. This type of applications can be implemented in ITER using fast controllers. ITER is standardizing the architectures to be used for fast controller implementation. Until now the standards chosen are PXIe architectures (based on PCIe) for the hardware and EPICS middleware for the software. This work presents the methodology for implementing data acquisition and pre-processing using FPGA-based DAQ cards and how to integrate these in fast controllers using EPICS.

Interfaz gráfica y fase de pruebas de software de vídeo forense (Sistema de codificación DV)

El presente proyecto fin de carrera, realizado por el ingeniero técnico en telecomunicaciones Pedro M. Matamala Lucas, es la fase final de desarrollo de un proyecto de mayor magnitud correspondiente al software de vídeo forense SAVID. El propósito del proyecto en su totalidad es la creación de una herramienta informática capacitada para realizar el análisis de ficheros de vídeo, codificados y comprimidos por el sistema DV –Digital Video-. El objetivo del análisis, es aportar información acerca de si la cinta magnética presenta indicios de haber sido manipulada con una edición posterior a su grabación original, además, de mostrar al usuario otros datos de interés como las especificaciones técnicas de la señal de vídeo y audio. Por lo tanto, se facilitará al usuario, analista de vídeo forense, información que le ayude a valorar la originalidad del contenido del soporte que es sujeto del análisis. El objetivo específico de esta fase final, es la creación de la interfaz de usuario del software, que informa tanto del código binario de los sectores significativos, como de su interpretación tras el análisis. También permitirá al usuario el reporte de los resultados, además de otras funcionalidades que le permitan la navegación por los sectores del código que han sido modificados como efecto colateral de la edición de la cinta magnética original. Otro objetivo importante del proyecto ha sido la investigación de metodologías y técnicas de desarrollo de software para su posterior implementación, buscando con esto, una mayor eficiencia en la gestión del tiempo y una mayor calidad de software con el fin de garantizar su evolución y sostenibilidad en el futuro. Se ha hecho hincapié en las metodologías ágiles que han ido ganando relevancia en el sector de las tecnologías de la información en las últimas décadas, sustituyendo a metodologías clásicas como el desarrollo en cascada. Su flexibilidad durante el ciclo de vida del software, permite obtener mejores resultados cuando las especificaciones no están del todo definidas, ajustándose de este modo a las condiciones del proyecto. Resumiendo las especificaciones técnicas del software, C++ es el lenguaje de programación orientado a objetos con el que se ha desarrollado, utilizándose la tecnología MFC -Microsoft Foundation Classes- para la implementación. Es un proyecto MFC de tipo cuadro de dialogo,creado, compilado y publicado, con la herramienta de desarrollo integrado Microsoft Visual Studio 2010. La arquitectura con la que se ha estructurado es la arquetípica de tres capas, compuesta por la interfaz de usuario, capa de negocio y capa de acceso a datos. Se ha visto necesario configurar el proyecto con compatibilidad con CLR –Common Languages Runtime- para poder implementar la funcionalidad de creación de reportes. Acompañando a la aplicación informática, se presenta la memoria del proyecto y sus anexos correspondientes a los documentos EDRF –Especificaciones Detalladas de Requisitos funcionales-, EIU –Especificaciones de Interfaz de Usuario , DT -Diseño Técnico- y Guía de Usuario. SUMMARY. This dissertation, carried out by the telecommunications engineer Pedro M. Matamala Lucas, is in its final stage and is part of a larger project for the software of forensic video called SAVID. The purpose of the entire project is the creation of a software tool capable of analyzing video files that are coded and compressed by the DV -Digital Video- System. The objective of the analysis is to provide information on whether the magnetic tape shows signs of having been tampered with after the editing of the original recording, and also to show the user other relevant data and technical specifications of the video signal and audio. Therefore the user, forensic video analyst, will have information to help assess the originality of the content of the media that is subject to analysis. The specific objective of this final phase is the creation of the user interface of the software that provides information about the binary code of the significant sectors and also its interpretation after analysis. It will also allow the user to report the results, and other features that will allow browsing through the sections of the code that have been modified as a secondary effect of the original magnetic tape being tampered. Another important objective of the project is the investigation of methodologies and software development techniques to be used in deployment, with the aim of greater efficiency in time management and enhanced software quality in order to ensure its development and maintenance in the future. Agile methodologies, which have become important in the field of information technology in recent decades, have been used during the execution of the project, replacing classical methodologies such as Waterfall Development. The flexibility, as the result of using by agile methodologies, during the software life cycle, produces better results when the specifications are not fully defined, thus conforming to the initial conditions of the project. Summarizing the software technical specifications, C + + the programming language – which is object oriented and has been developed using technology MFC- Microsoft Foundation Classes for implementation. It is a project type dialog box, created, compiled and released with the integrated development tool Microsoft Visual Studio 2010. The architecture is structured in three layers: the user interface, business layer and data access layer. It has been necessary to configure the project with the support CLR -Common Languages Runtime – in order to implement the reporting functionality. The software application is submitted with the project report and its annexes to the following documents: Functional Requirements Specifications - Detailed User Interface Specifications, Technical Design and User Guide.

Guidance for the development of accessibility evaluation tools following the Unified Software Development Process

Automated and semi-automated accessibility evaluation tools are key to streamline the process of accessibility assessment, and ultimately ensure that software products, contents, and services meet accessibility requirements. Different evaluation tools may better fit different needs and concerns, accounting for a variety of corporate and external policies, content types, invocation methods, deployment contexts, exploitation models, intended audiences and goals; and the specific overall process where they are introduced. This has led to the proliferation of many evaluation tools tailored to specific contexts. However, tool creators, who may be not familiar with the realm of accessibility and may be part of a larger project, lack any systematic guidance when facing the implementation of accessibility evaluation functionalities. Herein we present a systematic approach to the development of accessibility evaluation tools, leveraging the different artifacts and activities of a standardized development process model (the Unified Software Development Process), and providing templates of these artifacts tailored to accessibility evaluation tools. The work presented specially considers the work in progress in this area by the W3C/WAI Evaluation and Report Working Group (ERT WG)

Development and implementation of a virtual laboratory for training process improvement in the mechanics of continuous media

The project arises from the need to develop improved teaching methodologies in field of the mechanics of continuous media. The objective is to offer the student a learning process to acquire the necessary theoretical knowledge, cognitive skills and the responsibility and autonomy to professional development in this area. Traditionally the teaching of the concepts of these subjects was performed through lectures and laboratory practice. During these lessons the students attitude was usually passive, and therefore their effectiveness was poor. The proposed methodology has already been successfully employed in universities like University Bochum, Germany, University the South Australia and aims to improve the effectiveness of knowledge acquisition through use by the student of a virtual laboratory. This laboratory allows to adapt the curricula and learning techniques to the European Higher Education and improve current learning processes in the University School of Public Works Engineers -EUITOP- of the Technical University of Madrid -UPM-, due there are not laboratories in this specialization. The virtual space is created using a software platform built on OpenSim, manages 3D virtual worlds, and, language LSL -Linden Scripting Language-, which imprints specific powers to objects. The student or user can access this virtual world through their avatar -your character in the virtual world- and can perform practices within the space created for the purpose, at any time, just with computer with internet access and viewfinder. The virtual laboratory has three partitions. The virtual meeting rooms, where the avatar can interact with peers, solve problems and exchange existing documentation in the virtual library. The interactive game room, where the avatar is has to resolve a number of issues in time. And the video room where students can watch instructional videos and receive group lessons. Each audiovisual interactive element is accompanied by explanations framing it within the area of knowledge and enables students to begin to acquire a vocabulary and practice of the profession for which they are being formed. Plane elasticity concepts are introduced from the tension and compression testing of test pieces of steel and concrete. The behavior of reticulated and articulated structures is reinforced by some interactive games and concepts of tension, compression, local and global buckling will by tests to break articulated structures. Pure bending concepts, simple and composite torsion will be studied by observing a flexible specimen. Earthquake resistant design of buildings will be checked by a laboratory test video.