Helene & Writing Abuse, Shame, and Death: A Poetics of Spirit within the Failing Body

Thesis (Master's)--University of Washington, 2016-06

County

Thesis (Master's)--University of Washington, 2016-06

A[not]her Nature

Thesis (Master's)--University of Washington, 2016-06

An Analytical Solution for the Elastic Lateral-Distortional Buckling of I-section Beams

Lateral-distortional buckling may occur in I-section beams with slender webs and stocky flanges. A computationally efficient method is presented in this paper to study this phenomenon. Previous studies on distortional buckling have been on the use of 3(rd) and 5(th) order polynomials to model the displacements. The present study provides an alternative way, using Fourier Series, to model the behaviour. Beams of different cross-sectional dimensions, load cases and restraint conditions are examined and compared. The accuracy and versatility of the method are verified by calibrating against the results of other published studies. The present method is believed to be a simple and efficient way of determining the buckling load and mode shapes of I-section beams that are susceptible to lateral-distortional buckling modes.

Distortional buckling of I-beams by finite element method

Distortional buckling, unlike the usual lateral-torsional buckling in which the cross-section remains rigid in its own plane, involves distortion of web in the cross-section. This type of buckling typically occurs in beams with slender web and stocky flanges. Most of the published studies assume the web to deform with a cubic shape function. As this assumption may limit the accuracy of the results, a fifth order polynomial is chosen here for the web displacements. The general line-type finite element model used here has two nodes and a maximum of twelve degrees of freedom per node. The model not only can predict the correct coupled mode but also is capable of handling the local buckling of the web.

Factors affecting the design and construction of Lamella suspen-dome systems

The suspen-dome system is a new structural form that has become popular in the construction of long-span roof structures. These domes are very slender and lightweight, their configuration is complicated, and hence sequential consideration in the structural design is needed. This paper focuses on these considerations, which include the method for designing cable prestress force, a simplified analysis method, and the estimation of buckling capacity. Buckling is one of the most important problems for dome structures. This paper presents the findings of an intensive buckling study of the Lamella suspen-dome system that takes geometric imperfection, asymmetric loading, rise-to-span ratio, and connection rigidity into consideration. Finally, suggested design and construction guidelines are given in the conclusion of this paper. (c) 2005 Elsevier Ltd. All rights reserved.

New Thelastomatoidea (Nematoda : Oxyurida) from Australian burrowing cockroaches (Blaberidae : Geoscapheinae, Panesthiinae)

Four new species and two new genera of thelastomatoid are described from several species of Australian burrowing cockroaches (Blattodea: Panesthiinae; Geoscapheinae). Corpicracens munozae n. g., n. sp., Pseudodesmicola botti n. g., n. sp. and Cephalobellus nolani n. sp. are described from Geoscapheus dilatatus (Blattodea: Geoscapheinae) from Mendooran, New South Wales; one new thelastomatid, Blattophila praelongicauda n. sp., is described from Panesthia cribrata from Lamington National Park, Queensland. Corpicracens munozae n. g., n. sp. is long and slender, with a monodelphic female reproductive system, a clavate corpus with a slight posterior pseudobulb, oval eggs flattened at the poles, and a relatively robust, subulate tail. Pseudodesmicola botti n. g., n. sp. is slightly more robust in body, also has a monodelphic reproductive system, a cylindrical corpus with a posterior pseudobulb, ovoid eggs and a very long, subulate tail. Cephalobellus nolani n. sp. is distinguished from other members of the genus by its relatively short and broad body and egg shape. Lastly, Blattophila praelongicauda n. sp. is distinguished from other members of the genus by having eggs with a single, polar operculum, tail length, and position of the vulva, nerve ring and excretory pore. An additional species, known by a single specimen from Panesthia tryoni tryoni from the same locality is characterised but not named. The species found are all relatively rare parasites of Australian burrowing cockroaches, each having a prevalence of less than 10%.

A new phylogenetic group of Propionibacterium acnes

Immunofluorescence microscopy-based identification of presumptive Propionibacterium acnes isolates, using the P. acnes-specific mAb QUBPa3, revealed five organisms with an atypical cellular morphology. Unlike the coryneform morphology seen with P. acnes types I and II, these isolates exhibited long slender filaments (which formed large tangled aggregates) not previously described in P. acnes. No reaction with mAbs that label P. acnes types IA (QUBPa1) and II (QUBPa2) was observed. Nucleotide sequencing of the 16S rRNA gene (1484 bp) revealed the isolates to have between 99.8 and 99.9 % identity to the 16S rRNA gene of the P. acnes type IA, IB and II strains NCTC 737, KPA171202 and NCTC 10390, respectively. Analysis of the recA housekeeping gene (1047 bp) did reveal, however, a greater number of conserved nucleotide polymorphisms between the sequences from these isolates and those from NCTC 737 (98.9 % identity), KPA171202 (98.9 % identity) and NCTC 10390 (99.1 % identity). Phylogenetic investigations demonstrated that the isolates belong to a novel recA cluster or lineage distinct from P. acnes types I and II. We now propose this new grouping as P. acnes type III. The prevalence and clinical importance of this novel recA lineage amongst isolates of P. acnes remains to be determined.

Simplified PRBMs of spatial compliant multi-beam modules for planar motion

PRBMs (pseudo-rigid-body models) have been becoming important engineering technologies/methods in the field of compliant mechanisms to simplify the design and analysis through the use of the knowledge body of rigid-body mechanisms coupling with springs. This article addresses the PRBMs of spatial multi-beam modules for planar motion, which are composed of three or more symmetrical wire/slender beams parallel to each other where the planar twisting DOF (degree of freedom) is assumed to be very small for specific applications/loading conditions. Simplified PRBMs are firstly proposed through replacing each beam in spatial multi-beam module with a rigid-body link plus two identical spherical joints at its two ends. The characteristics factor, bending stiffness and twisting stiffness for the spherical joint are determined. Load-displacement equations are then derived for a class of spatial multi-beam modules and general spatial multi-beam modules using the virtual work principle and kinematic relationships. Finally, nonlinear FEA (finite element analysis) is employed with comparisons with the PRBMs. The present PRBMs have shown the ability to predict the primary nonlinear constraint characteristics such as load-stiffening effect, cross-axis coupling in the two primary translational directions and buckling load.

To Madagascar and back: long-distance, return migration across open ocean by a pregnant female bull shark Carcharhinus leucas

A large, pregnant, female bull shark Carcharhinus leucas was tracked migrating from Seychelles across open ocean to south-east Madagascar, c. 2000 km away, and back again. In Madagascar, the shark spent a prolonged period shallower than 5 m, consistent with entering estuarine habitat to pup, and upon return to Seychelles the shark was slender and no longer gravid. This represents an unprecedented return migration across the open ocean for a C. leucas and highlights the need for international collaboration to manage the regional C. leucas population sustainably.

To Madagascar and back: long-distance, return migration across open ocean by a pregnant female bull shark Carcharhinus leucas

A large, pregnant, female bull shark Carcharhinus leucas was tracked migrating from Seychelles across open ocean to south-east Madagascar, c. 2000 km away, and back again. In Madagascar, the shark spent a prolonged period shallower than 5 m, consistent with entering estuarine habitat to pup, and upon return to Seychelles the shark was slender and no longer gravid. This represents an unprecedented return migration across the open ocean for a C. leucas and highlights the need for international collaboration to manage the regional C. leucas population sustainably.

Ontogenie und Phylogenie der Belemnitenart Hibolites jaculoides SWINNERTON, 1937, aus dem Hauterivium (Unterkreide) von NW-Deutschland (Sarstedt) und NE England (Speeton)

The belemnite species Hibolites jaculoides Swinnerton, 1937 is redefined on the basis of a bed by bed collection of 2100 rostrums from the Upper Hauterivian (Cretaceous deposits of NW Germany and Yorkshire, England. According to the variate-statistical evaluation of the data gathered, definite phylotic changes are disdernible within the species. All characters measured indicate a definite tendency towards reduction in size. Large-sized, club-shaped specimens are typical for the stratigraphically older beds, delicate and slender-built forms dominate in the upper Upper Hauterivian. Comparison of the material from England and Germany yielded that three of the varieties described by Swinnerton are limited mainly to the lower Upper Hauterivian of England.

Chemotaxonomic studies on Schwenckia americana LINN.

This study investigated the chemotaxonomic studies on Schwenckia americana Linn., a member of the family Solanaceae predominantly found mostly in low grass fields, Nigeria. The habit is annual herbaceous weed with slender stem characterized with free branching and growing up to 45cm in height.They are used mainly as medicine. The leaves are simple, entire, elliptic to ovate in shape, smooth, variable, petiolate and larger at the lower region of stem and narrowing to smaller almost sessile and oblanceolate towards the apical regions which are alternately arranged and acrescently structured from the top to the base upto 3.7 ± 1.5cm long and 2.4±0.6cm wide. The inflorescence is a panicle of 15 or more flowers occurring at stem terminal.The flowers are whitish tubular structures measuring up to 1.0±0.2cm in length and 0.1cm in diameter. The petals are whitish up to 0.9 ±0.2cm in length and sepals are greenish up to 0.1cm in length. The berry fruit is greenish when unripe and pale yellowish when ripe up to 0.3±0.1cm in diameter. The seeds are blackish and spherical or triangular shaped with rough edges measuring up to 0.1cm in diameter. The epidermal studies reveal anomocytic stomata whereas the trichomes are simple uniseriate forms wth bulge heads. The anatomy of mid-ribs and petioles showed bicollateral vascular systems. There are three vascular traces and the node is unilacunar. The petioles have 2 rib traces at primary growth phase. At secondary growth phase, the mid-rib and petiole revealed vascular arcs and the stem has a ring of open vascular system. The cytological studies showed a diploid chromosome number of 2n = 24 and n = 12 for the haploids. Alkaloids, saponins, tannins, phlobatannins, flavonoids, combined anthraquinones, free anthraquinones and cardiac glycosides are present.

Isolation and characterization of Flavobacterium columnare (Bernardet et al. 2002) from four tropical fish species in Brazil

Flavobacterium columnare é o agente etiológico da columnariose em peixes de água doce, ocasionando enfermidade na pele e nas brânquias, provocando freqüentemente um grande número de mortalidade. O objetivo deste estudo foi o isolamento e a caracterização de Flavobacterium columnare em peixes tropicais no Brasil. Piracanjuba (Brycon orbignyanus), pacu (Piaractus mesopotamicus), tambaqui (Colossoma macropomum) e cascudo (Hypostomus plecostomus) foram examinados externamente com relação a sinais característicos de columnariose, como manchas acinzentadas na cabeça, região dorsal e pedúnculo caudal dos peixes. A amostragem compreendeu a coleta de 50 exemplares de peixes, representando as quatro diferentes espécies escolhidas para este estudo. Amostras para o isolamento foram obtidas através de raspado com swab estéril das lesões e do rim dos peixes clinicamente diagnosticados como acometidos por columnarios e imediatamente semeados em meios de culturas artificiais (líquido e sólido) próprios para o estudo de Flavobacterium segundo Carlson e Pacha (1968). No meio líquido, houve o desenvolvimento de microrganismos que observados em gota pendente apresentaram a forma de bacilos finos, longos, móveis por deslizamento. Através da coloração de Gram, apresentaram morfologia de bacilos finos, Gram negativos, agrupados em colunas. em meio sólido, as colônias eram pequenas, cinza-amareladas, com borda em forma de raiz. No total, foram obtidos quatro isolamentos: 01 cepa de Brycon orbignyanus; 01 cepa de Piaractus mesopotamicus; 01 cepa de Colossoma macropomum; e 01 cepa de Hypostomus plecostomus. A caracterização bioquímica das amostras, como absorção do vermelho Congo, produção de flexirrubina, produção de H2S e redução do nitrato, sugere que os isolamentos poderiam ser classificados como Flavobacterium columnare.

Espécies de Meloidogyne em hortaliças e outras culturas provenientes de áreas periurbanas da África Subsaariana

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Departamento de Fitopatologia, Programa de Pós-Graduação em Fitopatologia, 2016.