Eating habits and psychopathology: translation, adaptation, reliability of the Nutrition Behavior Inventory to Portuguese and relation to psychopathology

Objective: The Nutrition-Behavior Inventory (NBI) is a self-administered instrument that allows eating habits to be correlated with psychopathological symptoms. The objective was to translate and adapt the NBI to Portuguese, and test the Portuguese NBI’s reliability. The second aim was to verify its sensitivity for identification of risk factors in terms of behavior/eating habits in children and adolescents. Methods: The NBI was translated, adapted, and back-translated. The Portuguese version of the NBI was then applied (N = 96; 9-12 years). In order to verify the internal consistency, Cronbach’s alpha was used. The psychopathological indicators of the participants were accessed using the Child Behavior Checklist (CBCL). The mean CBCL scores were analyzed in relation to the NBI data (cutoff point: ≥ 30 with indicators, and < 30 without). Results: Internal consistency was high (Cronbach’s alpha = 0.89) for the NBI. The CBCL scores correlated significantly with NBI (> 30) on the following: anxiety and depression (p = 0.041), social difficulties (p = 0.028), attention problems (p = 0.001), aggressive behavior (p = 0.015); ADHD (p < 0.001), and conduct problems (p = 0.032). Conclusion: The present results indicate that the NBI is a reliable instrument. The NBI can be useful for evaluating psychopathological symptoms related to the eating habits and behaviors of children and adolescents.

Personal and Social Performance (PSP) scale for patients with schizophrenia: translation to Portuguese, cross-cultural adaptation and interrater reliability

INTRODUCTION: Schizophrenia is a chronic mental disorder associated with impairment in social functioning. The most widely used scale to measure social functioning is the GAF (Global Assessment of Functioning), but it has the disadvantage of measuring at the same time symptoms and functioning, as described in its anchors. OBJECTIVES:Translation and cultural adaptation of the PSP, proposing a final version in Portuguese for use in Brazil. METHODS: We performed five steps: 1) translation; 2) back translation; 3) formal assessment of semantic equivalence; 4) debriefing; 5) analysis by experts. Interrater reliability (Intraclass correlation, ICC) between two raters was also measured. RESULTS: The final version was applied by two independent investigators in 18 adults with schizophrenia (DSM-IV-TR). The interrater reliability (ICC) was 0.812 (p < 0.001). CONCLUSION: The translation and adaptation of the PSP had an adequate level of semantic equivalence between the Portuguese version and the original English version. There were no difficulties related to understanding the content expressed in the translated texts and terms. Its application was easy and it showed a good interrater reliability. The PSP is a valid instrument for the measurement of personal and social functioning in schizophrenia.

A questionnaire to evaluate the impact of chronic diseases: validated translation and Illness Effects Questionnaire (IEQ) reliability study

INTRODUCTION: Patients' perception about their health condition, mainly involving chronic diseases, has been investigated in many studies and it has been associated to depression, compliance with the treatment, quality of life and prognosis. The Illness Effects Questionnaire (IEQ) is a tool which makes the standardized evaluation of patients' perception about their illness possible, so that it is brief and accessible to the different clinical settings. This work aims to begin the transcultural adaptation of the IEQ to Brazil through the validated translation and the reliability study. METHODS: The back-translation method and the test-retest reliability study were used in a sample of 30 adult patients under chronic hemodialysis. The reliability indexes were estimated using the Pearson, Spearman, Weighted Kappa and Cronbach's alpha coefficients. RESULTS: The semantic equivalence was reached through the validated translation. In this study, the reliability indexes obtained were respectively: 0.85 and 0.75 (p < 0.001); 0.68 and 0.92 (p < 0.0001). DISCUSSION: The reliability indexes obtained attest to the stability of responses in both evaluations. Additional procedures are necessary for the transcultural adaptation of the IEQ to be complete. CONCLUSION: The results indicate the translation validity and the reliability of the Brazilian version of the IEQ for the sample studied.

Algorithms and computational tools for metabolic flux analysis

PhD thesis in Biomedical Engineering

Reliability and convergent validity of the Childhood Anxiety Sensitivity Index in children and adolescents

OBJECTIVE: The purpose of this study was to examine the reliability and the convergent validity of the Children Anxiety Sensitivity Index (CASI) with DSM-IV anxiety disorder symptoms, by comparison with the Screen for Child Anxiety Related Emotional Disorders (SCARED), in a community sample of Brazilian children and adolescents. METHODS: Children and adolescents from five schools were selected from a larger study that aimed to assess different aspects of childhood anxiety disorders. All participants completed the CASI and the SCARED. RESULTS: This study supported the reliability of the CASI total score. Girls reported higher total anxiety sensitivity scores than boys and there were no differences in total anxiety sensitivity scores between children and adolescents. This study showed moderate to high correlations between the CASI scores with SCARED scores, all correlations coefficients being positive and significant. CONCLUSIONS: Our findings demonstrate an appropriate reliability and evidence of convergent validity in the CASI in a sample of Brazilian children and adolescents.

Reliability of the interpretation of coronary angiography by the simple visual method

OBJECTIVE: Evaluation of inter and intraobserver reproducibility of by the visual method interpretation of cineangiogram in a clinically based context. METHODS: Five interventional cardiologists analyzed 11 segments of 8 coronary cineangiograms at a two month apart sessions. The percent luminal reduction by the lesions were analyzed by two different classifications: in one (A) the lesions were graded in 0% = absent, 1-50% = mild, 51 - 69 = moderate, and > or = 70% = severe; the other classification (B) was a dichotomic one : <70% = nonsignificant and > or = 70%=significant lesions. The agreement were measured by the kappa (k) index. RESULTS: Interobserver agreement was moderate for classification A (1st measurement, k = 0.36 -- 0.63, k m = 0.49; 2nd measurement, k = 0.39-0.68, k m = 0.52) and good for classification B (1st measurement, k = 0.55-0.73, k m = 0.63; 2nd measurement, k = 0.37-0.82, k m = 0.61). Intraobserver levels of agreement were k = 0.57-0.95 for classification A and 0.62-1.0 for classification B. CONCLUSION: The higher level of reproducibility obtained by adopting the dichotomous criteria usually considered for ischemic limits demonstrates that in the present clinical context, the reliability of the simple visual method is adequate for the identification of patients with clinically significant lesions and candidates for myocardial revascularization procedures.

Reliability of the information about the history of diagnosis and treatment of hypertension. Differences in regard to sex, age, and educational level. The pró-saúde study

OBJECTIVE: To assess the intraobserver reliability of the information about the history of diagnosis and treatment of hypertension. METHODS: A multidimensional health questionnaire, which was filled out by the interviewees, was applied twice with an interval of 2 weeks, in July '99, to 192 employees of the University of the State of Rio de Janeiro (UERJ), stratified by sex, age, and educational level. The intraobserver reliability of the answers provided was estimated by the kappa statistic and by the coefficient of intraclass correlation (CICC). RESULTS: The general kappa (k) statistic was 0.75 (95% CI=0.73-0.77). Reliability was higher among females (k=0.88, 95% CI=0.85-0.91) than among males (k=0.62, 95% CI=0.59-0.65).The reliability was higher among individuals 40 years of age or older (k=0.79; 95% CI=0.73-0.84) than those from 18 to 39 years (k=0.52; 95% CI=0.45-0.57). Finally, the kappa statistic was higher among individuals with a university educational level (k=0.86; 95% CI=0.81-0.91) than among those with high school educational level (k=0.61; 95% CI=0.53-0.70) or those with middle school educational level (k=0.68; 95% CI=0.64-0.72). The coefficient of intraclass correlation estimated by the intraobserver agreement in regard to age at the time of the diagnosis of hypertension was 0.74. A perfect agreement between the 2 answers (k=1.00) was observed for 22 interviewees who reported prior prescription of antihypertensive medication. CONCLUSION: In the population studied, estimates of the reliability of the history of medical diagnosis of hypertension and its treatment ranged from substantial to almost perfect reliability.

Desarrollo de Algoritmos Numéricos para el Estudio de la Propagación no Lineal de Ondas en Aplicaciones Aeroespaciales y Astrofísicas. Develop to Numerical Algorithms to Study non-Linear Waves Propagation in Aerospace and Astrophysics Applications.

En este proyecto se desarrollarán algoritmos numéricos para sistemas no lineales hiperbólicos-parabólicos de ecuaciones diferenciales en derivadas parciales. Dichos sistemas tienen aplicación en propagación de ondas en ámbitos aeroespaciales y astrofísicos.Objetivos generales: 1)Desarrollo y mejora de algoritmos numéricos con la finalidad de incrementar la calidad en la simulación de propagación e interacción de ondas gasdinámicas y magnetogasdinámicas no lineales. 2)Desarrollo de códigos computacionales con la finalidad de simular flujos gasdinámicos de elevada entalpía incluyendo cambios químicos, efectos dispersivos y difusivos.3)Desarrollo de códigos computacionales con la finalidad de simular flujos magnetogasdinámicos ideales y reales.4)Aplicación de los nuevos algoritmos y códigos computacionales a la solución del flujo aerotermodinámico alrededor de cuerpos que ingresan en la atmósfera terrestre. 5)Aplicación de los nuevos algoritmos y códigos computacionales a la simulación del comportamiento dinámico no lineal de arcos magnéticos en la corona solar. 6)Desarrollo de nuevos modelos para describir el comportamiento no lineal de arcos magnéticos en la corona solar.Este proyecto presenta como objetivo principal la introducción de mejoras en algoritmos numéricos para simular la propagación e interacción de ondas no lineales en dos medios gaseosos: aquellos que no poseen carga eléctrica libre (flujos gasdinámicos) y aquellos que tienen carga eléctrica libre (flujos magnetogasdinámicos). Al mismo tiempo se desarrollarán códigos computacionales que implementen las mejoras de las técnicas numéricas.Los algoritmos numéricos se aplicarán con la finalidad de incrementar el conocimiento en tópicos de interés en la ingeniería aeroespacial como es el cálculo del flujo de calor y fuerzas aerotermodinámicas que soportan objetos que ingresan a la atmósfera terrestre y en temas de astrofísica como la propagación e interacción de ondas, tanto para la transferencia de energía como para la generación de inestabilidades en arcos magnéticos de la corona solar. Estos dos temas poseen en común las técnicas y algoritmos numéricos con los que serán tratados. Las ecuaciones gasdinámicas y magnetogasdinámicas ideales conforman sistemas hiperbólicos de ecuaciones diferenciales y pueden ser solucionados utilizando "Riemann solvers" junto con el método de volúmenes finitos (Toro 1999; Udrea 1999; LeVeque 1992 y 2005). La inclusión de efectos difusivos genera que los sistemas de ecuaciones resulten hiperbólicos-parabólicos. La contribución parabólica puede ser considerada como términos fuentes y tratada adicionalmente tanto en forma explícita como implícita (Udrea 1999; LeVeque 2005).Para analizar el flujo alrededor de cuerpos que ingresan en la atmósfera se utilizarán las ecuaciones de Navier-Stokes químicamente activas, mientras la temperatura no supere los 6000K. Para mayores temperaturas es necesario considerar efectos de ionización (Anderson, 1989). Tanto los efectos difusivos como los cambios químicos serán considerados como términos fuentes en las ecuaciones de Euler. Para tratar la propagación de ondas, transferencia de energía e inestabilidades en arcos magnéticos de la corona solar se utilizarán las ecuaciones de la magnetogasdinámica ideal y real. En este caso será también conveniente implementar términos fuente para el tratamiento de fenómenos de transporte como el flujo de calor y el de radiación. Los códigos utilizarán la técnica de volúmenes finitos, junto con esquemas "Total Variation Disminishing - TVD" sobre mallas estructuradas y no estructuradas.

Optimización en el cómputos de algoritmos de cuadratura para funciones especiales. Optimization of quadrature algorithms for special functions.

En nuestro proyecto anterior aproximamos el cálculo de una integral definida con integrandos de grandes variaciones funcionales. Nuestra aproximación paraleliza el algoritmo de cómputo de un método adaptivo de cuadratura, basado en reglas de Newton-Cote. Los primeros resultados obtenidos fueron comunicados en distintos congresos nacionales e internacionales; ellos nos permintieron comenzar con una tipificación de las reglas de cuadratura existentes y una clasificación de algunas funciones utilizadas como funciones de prueba. Estas tareas de clasificación y tipificación no las hemos finalizado, por lo que pretendemos darle continuidad a fin de poder informar sobre la conveniencia o no de utilizar nuestra técnica. Para llevar adelante esta tarea se buscará una base de funciones de prueba y se ampliará el espectro de reglas de cuadraturas a utilizar. Además, nos proponemos re-estructurar el cálculo de algunas rutinas que intervienen en el cómputo de la mínima energía de una molécula. Este programa ya existe en su versión secuencial y está modelizado utilizando la aproximación LCAO. El mismo obtiene resultados exitosos en cuanto a precisión, comparado con otras publicaciones internacionales similares, pero requiere de un tiempo de cálculo significativamente alto. Nuestra propuesta es paralelizar el algoritmo mencionado abordándolo al menos en dos niveles: 1- decidir si conviene distribuir el cálculo de una integral entre varios procesadores o si será mejor distribuir distintas integrales entre diferentes procesadores. Debemos recordar que en los entornos de arquitecturas paralelas basadas en redes (típicamente redes de área local, LAN) el tiempo que ocupa el envío de mensajes entre los procesadores es muy significativo medido en cantidad de operaciones de cálculo que un procesador puede completar. 2- de ser necesario, paralelizar el cálculo de integrales dobles y/o triples. Para el desarrollo de nuestra propuesta se desarrollarán heurísticas para verificar y construir modelos en los casos mencionados tendientes a mejorar las rutinas de cálculo ya conocidas. A la vez que se testearán los algoritmos con casos de prueba. La metodología a utilizar es la habitual en Cálculo Numérico. Con cada propuesta se requiere: a) Implementar un algoritmo de cálculo tratando de lograr versiones superadoras de las ya existentes. b) Realizar los ejercicios de comparación con las rutinas existentes para confirmar o desechar una mejor perfomance numérica. c) Realizar estudios teóricos de error vinculados al método y a la implementación. Se conformó un equipo interdisciplinario integrado por investigadores tanto de Ciencias de la Computación como de Matemática. Metas a alcanzar Se espera obtener una caracterización de las reglas de cuadratura según su efectividad, con funciones de comportamiento oscilatorio y con decaimiento exponencial, y desarrollar implementaciones computacionales adecuadas, optimizadas y basadas en arquitecturas paralelas.

Automating the testing process of image processing algorithms

As digital imaging processing techniques become increasingly used in a broad range of consumer applications, the critical need to evaluate algorithm performance has become recognised by developers as an area of vital importance. With digital image processing algorithms now playing a greater role in security and protection applications, it is of crucial importance that we are able to empirically study their performance. Apart from the field of biometrics little emphasis has been put on algorithm performance evaluation until now and where evaluation has taken place, it has been carried out in a somewhat cumbersome and unsystematic fashion, without any standardised approach. This paper presents a comprehensive testing methodology and framework aimed towards automating the evaluation of image processing algorithms. Ultimately, the test framework aims to shorten the algorithm development life cycle by helping to identify algorithm performance problems quickly and more efficiently.

Development of an integrated approach to reliability management and operation

The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-component Products (REFIDAM) Project. This project was founded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway-Mayo Institute of Technology and Thermo King Europe. The project aimed to develop a system in order to manage the information required for reliability assessment and improvement of multi-component products, by establishing information flows within the company and information exchange with fleet users.

Representations of lattice point sets : theory, algorithms, applications

Magdeburg, Univ., Fak. für Mathematik, Habil.-Schr., 2006

Reproducibility and Reliability of the Quality of Life Questionnaire in Patients With Atrial Fibrillation

Abstract Background: Studies have shown the impact of atrial fibrillation (AF) on the patients' quality of life. Specific questionnaires enable the evaluation of relevant events. We previously developed a questionnaire to assess the quality of life of patients with AF (AFQLQ version 1), which was reviewed in this study, and new domains were added. Objective: To demonstrate the reproducibility of the AFQLQ version 2 (AFQLQ v.2), which included the domains of fatigue, illness perception and well-being. Methods: We applied 160 questionnaires (AFQLQ v.2 and SF-36) to 40 patients, at baseline and 15 days after, to measure inter- and intraobserver reproducibility. The analysis of quality of life stability was determined by test-retest, applying the Bartko intraclass correlation coefficient (ICC). Internal consistency was assessed by Cronbach's alpha test. Results: The total score of the test-retest (n = 40) had an ICC of 0.98 in the AFQLQ v.2, and of 0.94 in the SF36. In assessing the intra- and interobserver reproducibility of the AFQLQ v.2, the ICC reliability was 0.98 and 0.97, respectively. The internal consistency had a Cronbach's alpha coefficient of 0.82, compatible with good agreement of the AFQLQ v.2. Conclusion: The AFQLQ v.2 performed better than its previous version. Similarly, the domains added contributed to make it more comprehensive and robust to assess the quality of life of patients with AF.

AvBandTest – a Testing Tool for Implementations of Available Band width Estimation Algorithms

This work describes a test tool that allows to make performance tests of different end-to-end available bandwidth estimation algorithms along with their different implementations. The goal of such tests is to find the best-performing algorithm and its implementation and use it in congestion control mechanism for high-performance reliable transport protocols. The main idea of this paper is to describe the options which provide available bandwidth estimation mechanism for highspeed data transport protocols and to develop basic functionality of such test tool with which it will be possible to manage entities of test application on all involved testing hosts, aided by some middleware.

Efficiency Comparison of DFT/IDFT Algorithms by Evaluating Diverse Hardware Implementations

In this paper we investigate various algorithms for performing Fast Fourier Transformation (FFT)/Inverse Fast Fourier Transformation (IFFT), and proper techniques for maximizing the FFT/IFFT execution speed, such as pipelining or parallel processing, and use of memory structures with pre-computed values (look up tables -LUT) or other dedicated hardware components (usually multipliers). Furthermore, we discuss the optimal hardware architectures that best apply to various FFT/IFFT algorithms, along with their abilities to exploit parallel processing with minimal data dependences of the FFT/IFFT calculations. An interesting approach that is also considered in this paper is the application of the integrated processing-in-memory Intelligent RAM (IRAM) chip to high speed FFT/IFFT computing. The results of the assessment study emphasize that the execution speed of the FFT/IFFT algorithms is tightly connected to the capabilities of the FFT/IFFT hardware to support the provided parallelism of the given algorithm. Therefore, we suggest that the basic Discrete Fourier Transform (DFT)/Inverse Discrete Fourier Transform (IDFT) can also provide high performances, by utilizing a specialized FFT/IFFT hardware architecture that can exploit the provided parallelism of the DFT/IDF operations. The proposed improvements include simplified multiplications over symbols given in polar coordinate system, using sinе and cosine look up tables, and an approach for performing parallel addition of N input symbols.