Regional differences regarding land tenancy in rural Rwanda, with special reference to sharecropping in a coffee production area

This paper examines land tenancy systems and tenant contracts in Rwanda, with respect to socioeconomic contexts. Our research in southern and eastern Rwanda produced data suggesting that land borrowing with fixed rents has been generally practiced, and that rent levels have been low in comparison to expected revenues from field production. In the western areas of coffee production, however, the practice of sharecropping has recently appeared. This system is advantageous to landowners, as they are able to acquire half of the harvests; in addition, the fixed rent levels in this region are much higher than those of other regions. In the southern and eastern regions, because land borrowing with fixed rents has been the only tenancy pattern and rent levels have remained low, the economic situation should be interpreted in the context of a continuing traditional Rwandan land tenure system. In contrast, in the western coffee production area, the soaring of fixed rents and the emergence of sharecropping have been brought about by high pressures for land use, which were caused not only by a population increase but also by the development of cash crop production and the existence of a labor exchange system. The increase in rent levels has therefore been offset by a corresponding increase in agricultural productivity.

Driving assistance system applied in curves for real vehicles | Sistema de ayuda a la conducción en curvas para vehículos reales

Decreasing the accidents on highway and urban environments is the main motivation for the research and developing of driving assistance systems, also called ADAS (Advanced Driver Assistance Systems). In recent years, there are many applications of these systems in commercial vehicles: ABS systems, Cruise Control (CC), parking assistance and warning systems (including GPS), among others. However, the implementation of driving assistance systems on the steering wheel is more limited, because of their complexity and sensitivity. This paper is focused in the development, test and implementation of a driver assistance system for controlling the steering wheel in curve zones. This system is divided in two levels: an inner control loop which permits to execute the position and speed target, softening the action over the steering wheel, and a second control outer loop (controlling for fuzzy logic) that sends the reference to the inner loop according the environment and vehicle conditions. The tests have been done in different curves and speeds. The system has been proved in a commercial vehicle with satisfactory results.

Effect of the Reference Line on Main Roughness Parameters

In the present paper the influence of the reference system with regard to the characterization of the surface finishing is analyzed. The effect of the reference system’s choice on the most representative surface finishing parameters (e.g. roughness average Ra and root mean square values Rq) is studied. The study can also be applied to their equivalent parameters in waviness and primary profiles. Based on ISO and ASME standards, three different types of regression lines (center, mean and orthogonal) are theoretically and experimentally analyzed, identifying the validity and applicability fields of each one depending on profile’s geometry.

Diseño acústico y electroacústico de Waipahu Transit Center en Honolulú, Hawái

El objetivo de este Proyecto Fin de Grado es el diseño de megafonía y PAGA (Public Address /General Alarm) de la estación de tren Waipahu Transit Center en la ciudad de Honolulú, Hawái. Esta estación forma parte de una nueva línea de tren que está en proceso de construcción actualmente llamada Honolulu Rail Transit. Inicialmente la línea de tren constará de 21 estaciones, en las que prácticamente todas están diseñadas como pasos elevados usando como referencia las autopistas que cruzan la isla. Se tiene prevista su fecha de finalización en el año 2019, aunque las primeras estaciones se inaugurarán en 2017. Se trata en primer lugar un estudio acústico del recinto a sonorizar, eligiendo los equipos necesarios: conmutadores, altavoces, amplificadores, procesador, equipo de control y micrófonos. Este primer estudio sirve para obtener una aproximación de equipos necesarios, así como la posible situación de estos dentro de la estación. Tras esto, se procede a la simulación de la estación mediante el programa de simulación acústica y electroacústica EASE 4.4. Para ello, se diseña la estación en un modelo 3D, en el que cada superficie se asocia a su material correspondiente. Para facilitar el diseño y el cómputo de las simulaciones se divide la estación en 3 partes por separado. Cada una corresponde a un nivel de la estación: Ground level, el nivel inferior que contiene la entrada; Concourse Level, pasillo que comunica los dos andenes; y Platform Level, en el que realizarán las paradas los trenes. Una vez realizado el diseño se procede al posicionamiento de altavoces en los diferentes niveles de la estación. Debido al clima existente en la isla, el cual ronda los 20°C a lo largo de todo el año, no es necesaria la instalación de sistemas de aire acondicionado o calefacción, por lo que la estación no está totalmente cerrada. Esto supone un problema al realizar las simulaciones en EASE, ya que al tratarse de un recinto abierto se deberán hallar parámetros como el tiempo de reverberación o el volumen equivalente por otros medios. Para ello, se utilizará el método Ray Tracing, mediante el cual se halla el tiempo de reverberación por la respuesta al impulso de la sala; y a continuación se calcula un volumen equivalente del recinto mediante la fórmula de Eyring. Con estos datos, se puede proceder a calcular los parámetros necesarios: nivel de presión sonora directo, nivel de presión sonora total y STI (Speech Transmission Index). Para obtener este último será necesario ecualizar antes en cada uno de los niveles de la estación. Una vez hechas las simulaciones, se comprueba que el nivel de presión sonora y los valores de inteligibilidad son acordes con los requisitos dados por el cliente. Tras esto, se procede a realizar los bucles de altavoces y el cálculo de amplificadores necesarios. Se estudia la situación de los micrófonos, que servirán para poder variar la potencia emitida por los altavoces dependiendo del nivel de ruido en la estación. Una vez obtenidos todos los equipos necesarios en la estación, se hace el conexionado entre éstos, tanto de una forma simplificada en la que se pueden ver los bucles de altavoces en cada nivel de la estación, como de una forma más detallada en la que se muestran las conexiones entre cada equipo del rack. Finalmente, se realiza el etiquetado de los equipos y un presupuesto estimado con los costes del diseño del sistema PAGA. ABSTRACT. The aim of this Final Degree Project is the design of the PAGA (Public Address / General Alarm) system in the train station Waipahu Transit Center in the city of Honolulu, Hawaii. This station is part of a new rail line that is currently under construction, called Honolulu Rail Transit. Initially, the rail line will have 21 stations, in which almost all are designed elevated using the highways that cross the island as reference. At first, it is treated an acoustic study in the areas to cover, choosing the equipment needed: switches, loudspeakers, amplifiers, DPS, control station and microphones. This first study helps to obtain an approximation of the equipments needed, as well as their placement inside the station. Thereafter, it is proceeded to do the simulation of the station through the acoustics and electroacoustics simulation software EASE 4.4. In order to do that, it is made the 3D design of the station, in which each surface is associated with its material. In order to ease the design and calculation of the simulations, the station has been divided in 3 zones. Each one corresponds with one level of the station: Ground Level, the lower level that has the entrance; Concourse Level, a corridor that links the two platforms; and Platform Level, where the trains will stop. Once the design is made, it is proceeded to place the speakers in the different levels of the station. Due to the weather in the island, which is about 20°C throughout the year, it is not necessary the installation of air conditioning or heating systems, so the station is not totally closed. This cause a problem when making the simulations in EASE, as the project is open, and it will be necessary to calculate parameters like the reverberation time or the equivalent volume by other methods. In order to do that, it will be used the Ray Tracing method, by which the reverberation time is calculated by the impulse response; and then it is calculated the equivalent volume of the area with the Eyring equation. With this information, it can be proceeded to calculate the parameters needed: direct sound pressure level, total sound pressure level and STI (Speech Transmission Index). In order to obtain the STI, it will be needed to equalize before in each of the station’s levels. Once the simulations are done, it is checked that the sound pressure level and the intelligibility values agree with the requirements given by the client. After that, it is proceeded to perform the speaker’s loops and the calculation of the amplifiers needed. It is studied the placement of the microphones, which will help to vary the power emitted by the speakers depending on the background noise level in the station. Once obtained all the necessary equipment in the station, it is done the connection diagram, both a simplified diagram in which there can be seen the speaker’s loops in each level of the station, or a more detailed diagram in which it is shown the wiring between each equipment of the rack. At last, it is done the labeling of the equipments and an estimated budget with the expenses for the PAGA design.

Greenfield shopping center development. The integration between environmental features, building design and investment analysis at the decision making stage

The Shopping centre is a long term investment in which Greenfield development decisions are often taken based on risks analysis regarding construction costs, location, competition, market and an expected DCF. Furthermore, integration between the building design, project planning, operational costs and investment analysis is not entirely considered by the investor at the decision making stage. The absence of such information tends to produce certain negative impacts on the future running costs and annual maintenance of the building, especially on energy demand and other occupancy expenses paid by the tenants to the landlord. From the investor´s point of view, this blind spot in strategy development will possibly decrease their profit margin as changes in the occupancy expenses[ ] have a direct outcome on the profit margin. In order to try to reduce some higher operating cost components such as energy use and other utility savings as well as their CO2 emissions, quite a few income properties worldwide have some type of environmental label such as BREEAM and LEED. The drawback identified in this labelling is that usually the investments required to get an ecolabel are high and the investor finds no direct evidence that it increases market value. However there is research on certified commercial properties (especially offices) that shows better performance in terms of occupancy rate and rental cost (Warren-Myers, 2012). Additionally, Sayce (2013) says that the certification only provides a quick reference point i.e. the lack of a certificate does not indicate that a building is not sustainable or efficient. Based on the issues described above, this research compares important components of the development stages such as investments costs, concept/ strategy development as well as the current investor income and property value. The subjects for this analysis are a shopping centre designed with passive cooling/bioclimatic strategies evaluated at the decision making stage, a certified regional shopping centre and a non-certified standard regional shopping centre. Moreover, the proposal intends to provide decision makers with some tools for linking green design features to the investment analysis in order to optimize the decision making process when looking into cost savings and design quality.

ASSISTÊNCIA DE SAÚDE ÀS MULHERES MUÇULMANAS NO BRASIL: UMA ANÁLISE DA RELAÇÃO ENTRE O SISTEMA RELIGIOSO ISLÂMICO E A POLÍTICA NACIONAL DE ATENÇÃO INTEGRAL À SAÚDE DA MULHER.

A presente dissertação tem por objetivo analisar os aspectos religiosos islâmicos e as implicações das relações de gênero no islam sobre a assistência de saúde às mulheres muçulmanas, e através disto, discutir a importância do conhecimento prévio do islamismo pelos profissionais de saúde para propor uma assistência de saúde congruente a estas mulheres, tendo por referência a Política Nacional de Atenção Integral à Saúde da Mulher. Esta pesquisa tem abordagem qualitativa, com o desenvolvimento de pesquisa de campo e aplicação de um roteiro de perguntas semi-estruturado, com questões relacionadas ao islamismo e à saúde das mulheres. Ao todo, foram entrevistadas dez pessoas, sendo estas: quatro mulheres revertidas ao islam, três mulheres de família muçulmana, dois sheiks e uma assistente social. As entrevistas foram realizadas no Centro de Divulgação do Islam para a América Latina e o Caribe (CDIAL) e na Assembléia Mundial da Juventude Islâmica na América Latina (WAMY).

Access to Electronic Data by Third-Country Law Enforcement Authorities, Challenges to EU Rule of Law and Fundamental Rights. Center for European Policy Studies, 2015

This study examines the challenges posed to European law by third country access to data held by private companies for the purposes of law enforcement. It pays particular attention to the implications for rule of law and fundamental rights of foreign authorities’ direct access to electronic information falling outside pre-established channels of supranational cooperation. A special focus is given to EU-US relations and the practical issues emerging in transatlantic relations covering mutual legal assistance and evidence gathering for law enforcement purposes in criminal proceedings.

Livestock grazing management and water quality protection : (state of the art reference document) /

Mode of access: Internet.

Compliance program reference : inspections of licensed and unlicensed blood banks (compliance program #7342.001) and inspections of source plasma establishments (compliance program #7342.002).

Mode of access: Internet.

Compliance program reference : OTC drug monograph implementation (compliance program #7361.003).

"September, 1985."

Vendor payments for medical care under public assistance, by program and type of service : fiscal years 1951-1970.

Cover title.

Japanese religion and philosophy : a guide to Japanese reference and research materials /

Mode of access: Internet.

Cost-effectiveness and preventive implications of employee assistance programs /

"Printed 1995"--T.p. verso.

An interpretative history of the Pacific Missile Test Center : the genesis: road to Point Mugu 1936-1946 /

Includes appendixes.