Multi-criteria selection of structural adhesives to bond ABS parts obtained by rapid prototyping

One of the most used methods in rapidprototyping is Fused Deposition Modeling (FDM), which provides components with a reasonable strength in plastic materials such as ABS and has a low environmental impact. However, the FDM process exhibits low levels of surface finishing, difficulty in getting complex and/or small geometries and low consistency in “slim” elements of the parts. Furthermore, “cantilever” elements need large material structures to be supported. The solution of these deficiencies requires a comprehensive review of the three-dimensional part design to enhance advantages and performances of FDM and reduce their constraints. As a key feature of this redesign a novel method of construction by assembling parts with structuraladhesive joints is proposed. These adhesive joints should be designed specifically to fit the plastic substrate and the FDM manufacturing technology. To achieve this, the most suitable structuraladhesiveselection is firstly required. Therefore, the present work analyzes five different families of adhesives (cyanoacrylate, polyurethane, epoxy, acrylic and silicone), and, by means of the application of technical multi-criteria decision analysis based on the analytic hierarchy process (AHP), to select the structuraladhesive that better conjugates mechanical benefits and adaptation to the FDM manufacturing process

Proposal for redesigning the financial system: lessons learned from the crisis

this paper analyzes the singularities inherent to the financial industry, in relation to other businesses, and its implications to financial crises throughout history. The efficient markets hypothesis is questioned, and its impact on the deregulation of the financial system is analyzed. Finally, the causes of the current crisis are investigated, and the general lines to be addressed for the redesign of a financial system to achieve an efficient and equitable capitalism are suggested.

Deployment and validation of a smart system for screening of language disorders in primary care

Neuro-evolutive development from birth until the age of six years is a decisive factor in a child?s quality of life. Early detection of development disorders in early childhood can facilitate necessary diagnosis and/or treatment. Primary-care pediatricians play a key role in its detection as they can undertake the preventive and therapeutic actions requested to promote a child?s optimal development. However, the lack of time and little specific knowledge at primary-care avoid to applying continuous early-detection anomalies procedures. This research paper focuses on the deployment and evaluation of a smart system that enhances the screening of language disorders in primary care. Pediatricians get support to proceed with early referral of language disorders. The proposed model provides them with a decision-support tool for referral actions to trigger essential diagnostic and/or therapeutic actions for a comprehensive individual development. The research was conducted by starting from a sample of 60 cases of children with language disorders. Validation was carried out through two complementary steps: first, by including a team of seven experts from the fields of neonatology, pediatrics, neurology and language therapy, and, second, through the evaluation of 21 more previously diagnosed cases. The results obtained show that therapist positively accepted the system proposal in 18 cases (86%) and suggested system redesign for single referral to a speech therapist in three remaining cases.

Rediseño del tutor automático de un laboratorio virtual

El siguiente trabajo abarca todo el proceso llevado a cabo para el rediseño de un sistema automático de tutoría que se integra con laboratorios virtuales desarrollados para la realización de prácticas por parte de estudiantes dentro de entornos virtuales tridimensionales. Los principales objetivos de este rediseño son la mejora del rendimiento del sistema automático de tutoría, haciéndolo más eficiente y por tanto permitiendo a un mayor número de estudiantes realizar una práctica al mismo tiempo. Además, este rediseño permitirá que el tutor se pueda integrar con otros motores gráficos con un coste relativamente bajo. Se realiza en primer lugar una introducción a los principales conceptos manejados en este trabajo así como algunos aspectos relacionados con trabajos previos a este rediseño del tutor automático, concretamente la versión anterior del tutor ligada a la plataforma OpenSim. Acto seguido se detallarán qué requisitos funcionales cumplirá así como las ventajas que aportará este nuevo diseño. A continuación, se explicará el desarrollo del trabajo donde se podrá ver cómo se ha reestructurado el antiguo sistema de tutoría, la aplicación de un diseño orientado a objetos y los distintos paquetes y clases que lo conforman. Por último, se detallarán las conclusiones obtenidas durante el desarrollo del trabajo así como la implicación del trabajo aquí mostrado en futuros desarrollos.---ABSTRACT--- The following work shows the process that has been carried out in order to redesign an automatic tutoring system that can be integrated into virtual laboratories developed for supporting students’ practices in 3D virtual environments. The main goals of this redesign are the improvement of automatic tutoring system performance, making it more efficient and therefore allowing more students to perform a practice at the same time. Furthermore, this redesign allows the tutor to be integrated with other graphic engines with a relative low cost. Firstly, we begin with an introduction to the main concepts used in this work and some aspects concerning the related previous works to this automatic tutoring system redesign, such as the previous version of the tutoring system bound to OpenSim. Secondly, it will be detailed what functional requirements are met and what advantages this new tutoring system will provide. Next, it will be explained how this work has been developed, how the previous tutoring system has been restructured, how an object-oriented design is applied and the classes and packages derived from this design. Finally, it will be outlined the conclusions drawn in the development of this work as well as how this work will take part in future works.

Diseño centrado en el usuario para el soporte de una aplicación móvil para estudiantes universitarios

Partiendo de una versión beta de la aplicación de la Escuela Técnica Superior de Ingenieros Informáticos para la plataforma Android, se plantea añadir unas nuevas funcionalidades para enriquecer el contenido de información accesible por los alumnos de la Escuela. Estas nuevas funcionalidades son relativas a la información de los calendarios, la localización de instalaciones de la Escuela e información particularizada para cada usuario, pudiendo iniciar sesión en la aplicación. Para ello primero se lleva a cabo un estudio de las herramientas de soporte para la gestión de calendarios. Este estudio se centra en la facilidad de aprendizaje, eficiencia y efectividad del usuario. Así mismo, se diseñan e implementan las nuevas funcionalidades de mapas y perfil. Para evaluar estas funcionalidades se diseñarán y llevaran a cabo actividades de evaluación de usabilidad a alumnos del centro. Con las conclusiones de esa evaluación se realiza un rediseño de las partes de la aplicación que lo necesiten con el nivel de usabilidad requerido por los usuarios finales.---ABSTRACT---Starting from a beta version of the ETSIINF application for the Android platform, it is considered to add some new features to enrich the content of the information accessible by the students of the School. These new features are related to calendar information, School facilities location and particularized information for each user, being able to login to the application. To this end, a study of the support tools for managing calendars is carried out in the first place. This study focuses on the ease to learn, the efficiency and the effectiveness of the user. Likewise, the new maps and profile features will be implemented. To evaluate these features, usability evaluation activities will be designed and carried out to students at the school. With the findings of this evaluation a redesign of the parts of the application that need it with the required level of usability for end users will be performed.

La iglesia de Santiago de los españoles en Roma y su entorno entre los siglos XV y XIX. Una historia a través del dibujo

Plaza Navona representa una de las visitas obligadas de Roma, pero solo algunos advertirán en ella la presencia española en la sala de exposiciones del Instituto Cervantes o en la inmediata Libreria Española. Todavía serán menos los que se percatarán de la huella española dejada en aquella iglesia de fachada anónima situada, en el extremo sur de la plaza: la antigua iglesia de Santiago de los Españoles. La presente tesis pretende, utilizando el dibujo como guía, herramienta y fin del proceso de análisis y estudio, reconstruir el proceso de conformación y construcción de la que fue iglesia española principal, cuya fundación hace patente el destacado papel jugado por la “nación” castellana en Roma durante la Edad Media; y en torno a la que se aglutinaron las actividades religiosas, diplomáticas y financieras de los castellanos que vivieron en la actual capital italiana. Se intentará recrear en el tiempo la que es hoy la iglesia de Nuestra Señora del Sagrado Corazón, sometiéndola a una restitución gráfica disciplinada, homogénea y objetiva en la medida de lo posible de las varias etapas que la han caracterizadas, desde su fundación hasta cuando en 1878 España se deshizo de ella, ya en ruina, vendiéndola. Como nos comenta Gaetano Moroni, de todas las comunidades nacionales que se encontraban en Roma la española parece ser efectivamente una de las más rica y prestigiosa. Aunque lo que no cuenta Moroni no haya sido todavía demostrado, dicho enunciado resulta de todas formas interesante puesto que pone el acento sobre el hecho de que ya desde el siglo X parece ser habitual de ocupar y reutilizar antiguas ruinas, usándolas como base para la construcción de hospitales para los peregrinos. Esta operación se hizo particularmente frecuente sobre todo antes del Gran Jubileo de 1450: de hecho desde la primera mitad del Quattrocento se fundan distintas iglesias y hospitales nacionales para acoger y prestar una adecuada asistencia y socorro a los innumerables peregrinos que llegaban a la ciudad, edificios que se van construyendo sobre los restos de antiguos edificios de época romana. Prueba de ello es en efecto la fundación originaria de la iglesia y hospital de los Españoles que, parte del conjunto de edificios que compone la Plaza Navona, situada en el corazón de Campo Marzio y cuya posición y forma corresponden a la del antiguo Estadio de Domiciano, y que ahora es en sus dimensiones, en su imagen arquitectónica y en su consistencia material, el resultado de la definición proyectual y de las transformaciones que se llevaron a cabo sobre lo que quedaba del antiguo templo español del siglo XV, entre finales del ‘800 y los años 30 del siglo XX . Transformaciones devastadoras, huellas grabadas o canceladas que encuentran una justificación en los acontecimientos históricos reflejados en el patrimonio urbano. El análisis de todas las fuentes permite trazar, si no la totalidad, buena parte de las modificaciones que la antigua iglesia de Santiago ha sufrido. La construcción del templo se puede dividir en tres momentos decisivos: una primera etapa de fundación en 1450-1478 en la que la iglesia tenía fachada y entrada en via de la Sapienza, hoy Corso Rinascimento; una segunda de significativa ampliación hacia Plaza Navona con una nueva fachada monumental hacia ese espacio público en 1496-1500; y una última importante ampliación entre 1525-1526, llevada a cabo por el arquitecto Antonio da Sangallo el Joven. Tras la intensa vida del templo, en el siglo XVIII, éste cae en ruina y finalmente es vendido en 1878 a la orden de los misioneros franceses de Nuestra Señora del Sagrado Corazón que la reconvierten en iglesia reformando totalmente el conjunto en 1881, según proyecto de Luca Carimini. En 1936, en plena fase de rectificación de trazados urbanos por obra del régimen fascista, según proyecto de Arnaldo Foschini, se mutila su extremidad hacia vía de la Sapienza dejando su estado tal y como se contempla en la actualidad. ABSTRACT The objective of this thesis is the reconstruction of the design and edification process -using drawings and sketches as a guide, tool and the end of the analytical process- of a church which was once the preeminent Spanish church in medieval Rome, known today as Nostra Signora del Sacro Cuore (Our Lady of the Sacred Heart). The founding of this church illustrates the important role held by the Castillian “nation” in Rome during the Middle Ages. It was the focal point of all the religious, diplomatic and economic activities of the Castillian community residing in today’s Italian capital. The aim of this proyect is a recreation the church in time by submitting it to a disciplined, homogenous and objective graphic restitution of the various stages most characteristic the temple, starting from its foundation until 1878 when, in a state of ruins, the church was finally sold off by Spain. Gaetano Moroni once commented that of all the international communities found in Rome, the Spanish community seemed to be one of the wealthiest and most prestigious. Such a statement proves interesting as it emphasizes that starting in the 10th century we see there was a widespread custom of occupying and reusing old ruins for use as the bases of new constructions of hospitals for pilgrims. This custom became especially frequent just before the Jubilee Year of 1450: in fact, in the first half of the Quattrocento we see the founding of many different national churches and hospitals which provided shelter and care to the countless pilgrims arriving in the city, buildings which were constructed on top of the ruins of ancient buildings left over from Roman times. Proof of this is the original foundation of the Spanish church and hospital forming part of the Piazza Navona, built upon and following the outline of the Stadium of Domitian, in the heart of Campo Marzio. Now, in its dimensions, its architectural image and its material substance, it represents the predominant result of the planning definitions and the transformations which affected the old 15th-century Spanish temple. Ocurring between the end of the 19th century and the 1930s, the transformations were devastating, erasing original peculiarities and engraving new ones, transformations made justifiable by the historical events reflected in its urban environs. Analyzing all sources allows us to trace, even if not in entirety, still a sizeable portion of the modifications undergone by the old Church of Saint James. The construction of the temple can be divided into three decisive moments: its foundation, from 1450 to 1478, when the church’s façade and main door looked out on to the Via della Sapienza, today’s central avenue of Corso del Rinascimento; the second stage being a major expansion towards the Piazza Navona (1496-1500) with a new, monumental façade facing the public space; and the third was the last significant expansion, carried out from 1525 to 1526 by the architect Antonio da Sangallo the Younger. Despite an intense and bustling life during the Modern Age, in the 18th century the church began to fall into ruin and was finally sold in 1878 to the order of French missionaries of Our Lady of the Sacred Heart, who reconverted it into a church and completely renovated the structure in 1881 in a project supervised by Luca Carimini. In 1936, the corrective urban redesign of Rome carried out by the fascist regime and implemented by Arnaldo Foschini mutilated the part bordering Via della Sapienza, leaving it as we see it today.

Los residuos de envases y embalajes en edificación residencial. Patrones de generación y estrategias de mejora de su gestión

Uno de los retos a los que se enfrenta la humanidad es la demanda de una sociedad con casi cero residuos: la búsqueda de una economía más eficiente en el uso de los recursos teniendo en cuenta el cambio climático y un abastecimiento sostenible de materias primas que permitan satisfacer las necesidades de una población mundial cada vez mayor, dentro de los límites sostenibles de los recursos naturales del planeta. Abordar este desafío implica la recuperación y reciclaje de materiales para reducir consumos de materias primas y, para ello, debe promoverse la innovación en la prevención y gestión de residuos, como estrategia hacia un desarrollo urbano sostenible. Los envases y embalajes forman parte de la cultura actual, relacionándose con el grado de desarrollo de países y regiones; el sector de la construcción no es ajeno a la problemática y genera un importante volumen de embalajes en las obras que no se gestionan de forma adecuada. El modelo de gestión de Residuos de Construcción Demolición (RCD) actual es poco eficaz, ya que los vertederos siguen recibiendo grandes cantidades de residuos valorizables. La normativa ha conseguido minimizar las prácticas ilegales, pero se comprueba que la gestión actual de los RCD en obra deja en manos de las plantas de tratamiento la misión de separar los residuos según su naturaleza y los datos aportados por las distintas plantas no permiten afirmar el grado de alcance de dicho objetivo, ni el destino de los mismos. Los envases y embalajes son un tipo de residuos que por su naturaleza suponen una fuente de recursos valorizables y por ello están presentes en directivas y leyes, dirigidas fundamentalmente al sector de la alimentación. En el ámbito de la construcción, hasta la fecha, no se habían tratado de forma específica, motivo que justifica este trabajo. Esta Tesis Doctoral tiene como objetivo principal mejorar la gestión de residuos de embalajes procedentes de materiales de construcción. Para ello se estudia un importante conjunto de obras de edificación residencial colectiva de 1173 viviendas, análisis que llevará a conocer los patrones de producción de los Residuos de Envases y Embalajes en Construcción (REEC) e identificar los productos o materiales responsables de su generación. La monitorización realizada, permitirá diseñar estrategias específicas que minimicen la generación de estos residuos y optimicen su valorización. Se ha podido comprobar que el tratamiento particularizado de los REEC puede mejorar los resultados de la gestión del conjunto de RCD, debido a que, al no mezclarse, se elimina un importante agente contaminador de los residuos inertes. Las obras analizadas alcanzan un nivel de segregación in situ muy bajo, y los capítulos de cerramientos e instalaciones suman más del 50% del global de REEC. Particularizando en cada tipo de material, el cartón predomina en los trabajos de electricidad, el plástico en las particiones y la madera en fachadas. Se evalúa la opción del eco-­‐rediseño para uno de los embalajes predominantes, y se identifican estrategias para minimizar su impacto. Se comprueba que el ahorro en la gestión de RCD en caso de impulsar la segregación in situ no es muy significativo en las obras estudiadas, si bien se demuestra que la viabilidad económica es el factor más importante para motivar a las empresas constructoras. Las Administraciones Públicas deberían incentivar la gestión responsable, estableciendo medidas de control en las plantas de tratamiento e implementando en sus obras medidas de gestión de RCD ejemplares para el mercado. Una adecuada planificación de la obra, y formación específica para el personal son medidas que facilitan la segregación in situ y mejoran los resultados. Los promotores, mediante su relación contractual con el resto de agentes, tienen la capacidad de establecer objetivos de reducción, planificación y gestión sostenible de los REEC. Por último, se propone un sistema de gestión de REEC, integrable dentro del Sistema de Gestión de la empresa constructora, que permite evitar que residuos valorizables tales como los envases y embalajes se envíen a vertedero, guiando al sector hacia un futuro más respetuoso, alineado con el desarrollo sostenible. ABSTRACT One of the challenges humanity faces is the demand of an almost zero waste society: the search for a more efficient economy in the use of resources, taking into account climate change and a sustainable supply of raw materials, that meet the needs of an increasing world population within the sustainable limits of the planet's natural resources. Addressing this challenge involves the recovery and recycling of materials to reduce consumption of raw materials, so innovation must therefore be promoted in the prevention and management of waste, as a strategy towards a sustainable urban development. Packaging is part of our current culture and is related to the degree of development of countries and regions; the construction sector is no stranger to this problem and generates a significant amount of packaging waste in the site works, which nowadays is not managed properly. The current Construction Demolition Waste (CDW) management model is ineffective, since landfills continue to receive large amounts of recoverable waste. The legislation has managed to minimize illegal practices, but it has been observed that the current management of CDW in the analysed works leaves the mission of separating waste according to their nature to the plants, and data provided by the latter does not allow for checking the scope of this objective, nor the destiny of the waste. Packaging is a type of waste which, by its nature, represents a source of recoverable resources and is therefore present in directives and laws, focused primarily on the food industry. It has not been specifically treated to date in the construction field, hence the reason that justifies this work. This Thesis aims to improve the management of packaging waste from construction materials. An important set of residential building works with 1173 dwellings is analysed, which leads to knowledge on the production patterns of packaging waste (PW) in the construction industry, and the identification of the products responsible for its generation. The monitorization also allows for the design of specific strategies which minimise the generation of waste and optimize recovery. It has been found that the individualized treatment of PW can improve the results of the management of the whole CDW since, when not mixed, a major pollutant of inert waste is removed. The analysed works reached a very low segregation level and the façades and building services phases account for more than 50% of the overall PW. Focusing on each type of material, cardboard predominates electricity works, plastic on partitions and wood on façades. Eco-­‐redesign is evaluated for one of the predominant packages, and strategies are identified to minimise their impact are . There is evidence that the savings in the CDW management in case of promoting segregation on site are not very significant at the studied works, although economic feasibility is the most important factor to motivate the construction companies. Public Administrations should encourage responsible management, establishing control measures in treatment plants and implementing CDW management exemplary measures on their work sites for the market. A proper planning of the works and specific training for the personnel are measures that facilitate in situ segregation and improve outcomes. The developers, through their contractual relationship with the other agents, have the ability to set reduction targets, planning and sustainable management of PW. Finally, a management system for PW is proposed, integrated within the Management System of the construction company, which aims to avoid that recoverable waste such as packaging is sent to landfill, leading the industry towards a more environmentally friendly future, aligned with sustainable development.

The environmental and economic effects of innovative measures in urban parcels delivery

The main scope of this research is to identify and evaluate solutions to redesign the parcels delivery logistic process to achieve higher level of quality, lower operational costs, energy consumptions and air pollution. The study is starting from the analysis of the delivery process managed by a leader company operating in Rome. Main delivery flows, personnel and fleet management costs, quality performances and environmental impacts are investigated. The results of this analysis are benchmarked with other European situations. On the basis of the feedback of this analysis, a set of operational measures, potentially able tackle the objectives, are identified and assessed by means of a simulative approach. The assessment is based on environmental and economic indicators allowing the comparison between new and reference scenarios from the viewpoints of the key players: operator, customer and Society. Moreover, the operational measures are combined into alternative packages by looking for the sets capable to maximize the benefits for the key players. The methodology, tested on Rome case study, is general and flexible enough to be extended to parcels delivery problem in different urban contexts, as well as to similar urban distribution problems (e.g. press, food, security, school)

Optimization and evaluation in space conditions of multi-GHz optical modulators

Among the different optical modulator technologies available such as polymer, III-V semiconductors, Silicon, the well-known Lithium Niobate (LN) offers the best trade-off in terms of performances, ease of use, and power handling capability [1-9]. The LN technology is still widely deployed within the current high data rate fibre optic communications networks. This technology is also the most mature and guarantees the reliability which is required for space applications [9].In or der to fulfil the target specifications of opto-microwave payloads, an optimization of the design of a Mach-Zehnder (MZ) modulator working at the 1500nm telecom wavelength was performed in the frame of the ESA-ARTES "Multi GigaHertz Optical Modulator" (MGOM) project in order to reach ultra-low optical insertion loss and low effective driving voltage in the Ka band. The selected modulator configuration was the X-cut crystal orientation, associated to high stability Titanium in-diffusion process for the optical waveguide. Starting from an initial modulator configuration exhibiting 9 V drive voltage @ 30 GHz, a complete redesign of the coplanar microwave electrodes was carried out in order to reach a 6 V drive voltage @ 30GHz version. This redesign was associated to an optimization of the interaction between the optical waveguide and the electrodes. Following the optimisation steps, an evaluation program was applied on a lot of 8 identical modulators. A full characterisation was carried out to compare performances, showing small variations between the initial and final functional characteristics. In parallel, two similar modulators were submitted to both gamma (10-100 krad) and proton irradiation (10.109 p/cm²) with minor performance degradation.

Diseña tu propia aula

En este Trabajo Fin de Máster se propone una aplicación de la metodología de Aprendizaje Basado en Proyectos en 3º de E.S.O. La solicitud, por parte de los alumnos, de innovar en el aula y los recursos de los que hoy en día disponemos, son la mayor motivación para diseñar los más variados Proyectos que puedan enriquecer la educación en valores y el aprendizaje de procedimientos, aspectos clave en el desarrollo profesional de nuestros alumnos. En el Proyecto “Diseña tu propia aula” se invita a los alumnos a crear un Estudio de Arquitectura con el objetivo de rediseñar su espacio de trabajo. Aplicando criterios sostenibles, mejorarán la eficiencia energética del aula y crearán un espacio más responsable con el Medio Ambiente. La implementación de los contenidos, competencias y criterios de evaluación a través de este proyecto promete ser un verdadero reto, tanto para docentes, como para los alumnos. ¿Estamos preparados? This Master’s Thesis applies Project Based Learning methodologies within third-year secondary education classrooms, particularly those of 3° E.S.O. Motivated by the demand from modern pupils for new innovation in the classroom and by the new resources available for use therein, this thesis proposes to design a project which enriches and improves the education of the student in both ethics and technical methods, key aspects of the student’s professional development. The “Design your own classroom” project invites pupils to create their own architecture studio within the classroom by challenging them to redesign their workplace through the application of sustainable design criteria in order to create a workspace that is more environmentally responsible. The inclusion of content, skills and evaluation criteria in this project present a real challenge both for the teacher and for the pupil. Are we ready?

Mejoras y extensiones en el Front-End de un modelo de predicción de acciones de un estudiante en un laboratorio virtual 3D

Este documento presenta las mejoras y las extensiones introducidas en la herramienta de visualización del modelo predictivo del comportamiento del estudiante o Student Behavior Predictor Viewer (SBPV), implementada en un trabajo anterior. El modelo predictivo del comportamiento del estudiante es parte de un sistema inteligente de tutoría, y se construye a partir de los registros de actividad de los estudiantes en un laboratorio virtual 3D, como el Laboratorio Virtual de Biotecnología Agroforestal, implementado en un trabajo anterior, y cuyos registros de actividad de los estudiantes se han utilizado para validar este trabajo fin de grado. El SBPV es una herramienta para visualizar una representación gráfica 2D del grafo extendido asociado con cualquiera de los clusters del modelo predictivo del estudiante. Además de la visualización del grafo extendido, el SBPV controla la navegación a través del grafo por medio del navegador web. Más concretamente, el SBPV permite al usuario moverse a través del grafo, ampliar o reducir el zoom del gráfico o buscar un determinado estado. Además, el SBPV también permite al usuario modificar el diseño predeterminado del grafo en la pantalla al cambiar la posición de los estados con el ratón. Como parte de este trabajo fin de grado, se han corregido errores existentes en la versión anterior y se han introducido una serie de mejoras en el rendimiento y la usabilidad. En este sentido, se han implementado nuevas funcionalidades, tales como la visualización del modelo de comportamiento de cada estudiante individualmente o la posibilidad de elegir el método de clustering para crear el modelo predictivo del estudiante; así como ha sido necesario rediseñar la interfaz de usuario cambiando el tipo de estructuras gráficas con que se muestran los elementos del modelo y mejorando la visualización del grafo al interaccionar el usuario con él. Todas estas mejoras se explican detenidamente en el presente documento.---ABSTRACT---This document presents the improvements and extensions made to the visualization tool Student Behavior Predictor Viewer (SBPV), implemented in a previous job. The student behavior predictive model is part of an intelligent tutoring system, and is built from the records of students activity in a 3D virtual laboratory, like the “Virtual Laboratory of Agroforestry Biotechnology” implemented in a previous work, and whose records of students activity have been used to validate this final degree work. The SBPV is a tool for visualizing a 2D graphical representation of the extended graph associated with any of the clusters of the student predictive model. Apart from visualizing the extended graph, the SBPV supports the navigation across the graph by means of desktop devices. More precisely, the SBPV allows user to move through the graph, to zoom in/out the graphic or to locate a given state. In addition, the SBPV also allows user to modify the default layout of the graph on the screen by changing the position of the states by means of the mouse. As part of this work, some bugs of the previous version have been fixed and some enhancements have been implemented to improve the performance and the usability. In this sense, we have implemented new features, such as the display of the model behavior of only one student or the possibility of selecting the clustering method to create the student predictive model; as well as it was necessary to redesign the user interface changing the type of graphic structures that show model elements and improving the rendering of the graph when the user interacts with it. All these improvements are explained in detail in the next sections.

Design and characterization of α-melanotropin peptide analogs cyclized through rhenium and technetium metal coordination

α-Melanocyte stimulating hormone (α-MSH) analogs, cyclized through site-specific rhenium (Re) and technetium (Tc) metal coordination, were structurally characterized and analyzed for their abilities to bind α-MSH receptors present on melanoma cells and in tumor-bearing mice. Results from receptor-binding assays conducted with B16 F1 murine melanoma cells indicated that receptor-binding affinity was reduced to approximately 1% of its original levels after Re incorporation into the cyclic Cys4,10, d-Phe7–α-MSH4-13 analog. Structural analysis of the Re–peptide complex showed that the disulfide bond of the original peptide was replaced by thiolate–metal–thiolate cyclization. A comparison of the metal-bound and metal-free structures indicated that metal complexation dramatically altered the structure of the receptor-binding core sequence. Redesign of the metal binding site resulted in a second-generation Re–peptide complex (ReCCMSH) that displayed a receptor-binding affinity of 2.9 nM, 25-fold higher than the initial Re–α-MSH analog. Characterization of the second-generation Re–peptide complex indicated that the peptide was still cyclized through Re coordination, but the structure of the receptor-binding sequence was no longer constrained. The corresponding 99mTc- and 188ReCCMSH complexes were synthesized and shown to be stable in phosphate-buffered saline and to challenges from diethylenetriaminepentaacetic acid (DTPA) and free cysteine. In vivo, the 99mTcCCMSH complex exhibited significant tumor uptake and retention and was effective in imaging melanoma in a murine-tumor model system. Cyclization of α-MSH analogs via 99mTc and 188Re yields chemically stable and biologically active molecules with potential melanoma-imaging and therapeutic properties.

Three-dimensional domain swapping in p13suc1 occurs in the unfolded state and is controlled by conserved proline residues

p13suc1 has two native states, a monomer and a domain-swapped dimer. We show that their folding pathways are connected by the denatured state, which introduces a kinetic barrier between monomer and dimer under native conditions. The barrier is lowered under conditions that speed up unfolding, thereby allowing, to our knowledge for the first time, a quantitative dissection of the energetics of domain swapping. The monomer–dimer equilibrium is controlled by two conserved prolines in the hinge loop that connects the exchanging domains. These two residues exploit backbone strain to specifically direct dimer formation while preventing higher-order oligomerization. Thus, the loop acts as a loaded molecular spring that releases tension in the monomer by adopting its alternative conformation in the dimer. There is an excellent correlation between domain swapping and aggregation, suggesting they share a common mechanism. These insights have allowed us to redesign the domain-swapping propensity of suc1 from a fully monomeric to a fully dimeric protein.

Transformación urbana, espacio público y su percepción social. El río Segura a su paso por Orihuela y Rojales

El río Segura en su tramo final, la Vega Baja en la provincia de Alicante, atraviesa las ciudades de Orihuela y Rojales, que se caracterizan por ser las dos únicas de esta zona en las que el cauce recorre su casco urbano. Se parte de las obras de remodelación del cauce con el Plan de Defensa contra Avenidas en la Cuenca del Río Segura, concluido en 1994, en el que la solución adoptada para el encauzamiento en los tramos urbanos es similar en ambos municipios. Esta investigación expone en qué medida dichas actuaciones han tenido un refl ejo directo en la imagen de la ciudad, en las actividades en el espacio público urbano y en la manera que es percibido por los ciudadanos. Finalmente, se ponen en evidencia resultados coincidentes y divergentes, pese a la similitud del contexto de las actuaciones.

3D model reconstruction using neural gas accelerated on GPU

In this work, we propose the use of the neural gas (NG), a neural network that uses an unsupervised Competitive Hebbian Learning (CHL) rule, to develop a reverse engineering process. This is a simple and accurate method to reconstruct objects from point clouds obtained from multiple overlapping views using low-cost sensors. In contrast to other methods that may need several stages that include downsampling, noise filtering and many other tasks, the NG automatically obtains the 3D model of the scanned objects. To demonstrate the validity of our proposal we tested our method with several models and performed a study of the neural network parameterization computing the quality of representation and also comparing results with other neural methods like growing neural gas and Kohonen maps or classical methods like Voxel Grid. We also reconstructed models acquired by low cost sensors that can be used in virtual and augmented reality environments for redesign or manipulation purposes. Since the NG algorithm has a strong computational cost we propose its acceleration. We have redesigned and implemented the NG learning algorithm to fit it onto Graphics Processing Units using CUDA. A speed-up of 180× faster is obtained compared to the sequential CPU version.