The Recovery of Copper in Sulphide Ores by Roasting, Leaching, and Electrolysis

Sulphide ores of copper are insoluble in dilute sulphuric acid leaching solutions, but a very high extraction can be obtained if the copper ore is in the oxidized condition. The problem is to convert the sulphide into the oxide form. This can be done by giving the sulphide ore an oxidizing-sulphatizing roast. Copper sulphate is soluble in water, so acid will be saved in the leaching process if copper sulphate is present. The iron in the copper sulphide ores is present as pyrite, or in combinations as bornite, or chalcopyrite.

Ammoniacal Sulphate Leach of Ananconda Zinc Calcine Recovery of the Zinc by Electrolysis.

Zinc is produced from ores by two general methods, distillation and electrolysis. The general principles involved in the electrolytic zinc process of today were known as far back as 1880. Difficulties encountered in purifying the solution for electrolysis and lack of suitable mechanical apparatus were the main reasons that such a long time elapsed before the process was used to produce zinc in commercial quantities.

Electrolytic Recovery of Copper and Zinc from Brass.

The reclamation of metals from scrap is becoming increasingly important in the metallurgical industry. Copper, because it does not corrode readily and is electronegative to most common metals, is peculiarly adapted to reclamation.

Interhemispheric cerebral blood flow balance during recovery of motor hand function after ischemic stroke - a longitudinal MRI study using arterial spin labeling perfusion

BACKGROUND Unilateral ischemic stroke disrupts the well balanced interactions within bilateral cortical networks. Restitution of interhemispheric balance is thought to contribute to post-stroke recovery. Longitudinal measurements of cerebral blood flow (CBF) changes might act as surrogate marker for this process. OBJECTIVE To quantify longitudinal CBF changes using arterial spin labeling MRI (ASL) and interhemispheric balance within the cortical sensorimotor network and to assess their relationship with motor hand function recovery. METHODS Longitudinal CBF data were acquired in 23 patients at 3 and 9 months after cortical sensorimotor stroke and in 20 healthy controls using pulsed ASL. Recovery of grip force and manual dexterity was assessed with tasks requiring power and precision grips. Voxel-based analysis was performed to identify areas of significant CBF change. Region-of-interest analyses were used to quantify the interhemispheric balance across nodes of the cortical sensorimotor network. RESULTS Dexterity was more affected, and recovered at a slower pace than grip force. In patients with successful recovery of dexterous hand function, CBF decreased over time in the contralesional supplementary motor area, paralimbic anterior cingulate cortex and superior precuneus, and interhemispheric balance returned to healthy control levels. In contrast, patients with poor recovery presented with sustained hypoperfusion in the sensorimotor cortices encompassing the ischemic tissue, and CBF remained lateralized to the contralesional hemisphere. CONCLUSIONS Sustained perfusion imbalance within the cortical sensorimotor network, as measured with task-unrelated ASL, is associated with poor recovery of dexterous hand function after stroke. CBF at rest might be used to monitor recovery and gain prognostic information.

An assessment of the relative influence of a vapor recovery system in reducing occupational exposure to volatile organic compounds in high performance liquid chromatography

Occupational exposures to organic solvents, specifically acetonitrile and methanol, have the potential to cause serious long-term health effects. In the laboratory, these solvents are used extensively in protocols involving the use of high performance liquid chromatography (HPLC). Operators of HPLC equipment may be potentially exposed to these organic solvents when local exhaust ventilation is not employed properly or is not available, which can be the case in many settings. The objective of this research was to characterize the various sites of vapor release in the HPLC process and then to determine the relative influence of a novel vapor recovery system on the overall exposure to laboratory personnel. The effectiveness of steps to reduce environmental solvent vapor concentrations was assessed by measuring exposure levels of acetonitrile and methanol before and after installation of the vapor recovery system. With respect to acetonitrile, the concentration was not statistically significant with p=0.938; moreover, exposure after the intervention was actually higher than prior to intervention. With respect to methanol, the concentration was not statistically significant with p=0.278. This indicates that the exposure to methanol after the intervention was not statistically significantly higher or lower than prior to intervention. Thus, installation of the vapor recovery device did not result in statistically significant reduction in exposures in the settings encountered, and acetonitrile actually increased significantly.^

Voltage recovery in intermediate band solar cells

The intermediate band solar cell (IBSC) is based on a novel photovoltaic concept and has a limiting efficiency of 63.2%, which compares favorably with the 40.7% efficiency of a conventional, single junction solar cell. It is characterized by a material hosting a collection of energy levels within its bandgap, allowing the cell to exploit photons with sub-bandgap energies in a two-step absorption process, thus improving the utilization of the solar spectrum. However, these intermediate levels are often regarded as an inherent source of supplementary recombination, although this harmful effect can in theory be counteracted by the use of concentrated light. We present here a novel, low-temperature characterization technique using concentrated light that reveals how the initially enhanced recombination in the IBSC is reduced so that its open-circuit voltage is completely recovered and reaches that of a conventional solar cell.

An approach to stakeholders involvement in the preparedness for nuclear and radiological emergency response & recovery in Spain

The elaboration of a generic decision-making strategy to address the evolution of an emergency situation, from the stages of response to recovery, and including a planning stage, can facilitate timely, effective and consistent decision making by the response organisations at every level within the emergency management structure and between countries, helping to ensure optimal protection of health, environment, and society. The degree of involvement of stakeholders in this process is a key strategic element for strengthening the local preparedness and response and can help a successful countermeasures strategy. A significant progress was made with the multi-national European project EURANOS (2004-2009) which brought together best practice, knowledge and technology to enhance the preparedness for Europe's response to any radiation emergency and long term contamination. The subsequent establishment of a European Technology Platform and the recent launch of the research project NERIS-TP ("Towards a self sustaining European Technology Platform (NERIS-TP) on Preparedness for Nuclear and Radiological Emergency Response and Recovery") are aimed to continue with the remaining tasks for gaining appropriate levels of emergency preparedness at local level in most European countries. One of the objectives of the NERIS-TP project is: Strengthen the preparedness at the local/national level by setting up dedicated fora and developing new tools or adapting the tools developed within the EURANOS projects (such as the governance framework for preparedness, the handbooks on countermeasures, the RODOS system, and the MOIRA DSS for long term contamination in catchments) to meet the needs of local communities. CIEMAT and UPM in close interaction with the Nuclear Safety Council will explore, within this project, the use and application in Spain of such technical tools, including other national tools and information and communication strategies to foster cooperation between local, national and international stakeholders. The aim is identify and involve relevant stakeholders in emergency preparedness to improve the development and implementation of appropriate protection strategies as part of the consequence management and the transition to recovery. In this paper, an overview of the "state of the art" on this area in Spain and the methodology and work Plan proposed by the Spanish group within the project NERIS to grow the stakeholder involvement in the preparedness to emergency response and recovery is presented.

Recovery of respiration following the SOS response of Escherichia coli requires RecA-mediated induction of 2-keto-4-hydroxyglutarate aldolase.

Agents that damage DNA in Escherichia coli or interfere with its replication induce DNA repair and mutagenesis via the SOS response. This well-known activity is regulated by the RecA protein and the LexA repressor. Following repair or bypass of the DNA lesion, the cell returns to its resting state by a largely unknown process. We found that 2-keto-4-hydroxyglutarate aldolase (4-hydroxy-2-oxoglutarate aldolase; EC 4.1.3.16) is necessary for the recovery of respiration and that it is regulated by the SOS response. This protein was induced by DNA-damaging agents. Induction required RecA activation. When the LexA regulon was repressed, activation of RecA was not sufficient for induction, indicating the requirement for an additional protein under LexA control. Finally, a mutant in the corresponding hga gene was UV sensitive. 2-Keto-4-hydroxyglutarate aldolase also plays a role in respiratory metabolic pathways, which suggests a mechanism for respiration resumption during the termination of the SOS response.

Simultaneous synthesis of heat exchanger networks with pressure recovery: optimal integration between heat and work

The optimal integration between heat and work may significantly reduce the energy demand and consequently the process cost. This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs) in which the pressure levels of the process streams can be adjusted to enhance the heat integration. A superstructure is proposed for the HEN design with pressure recovery, developed via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation. The process conditions (stream temperature and pressure) must be optimized. Furthermore, the approach allows for coupling of the turbines and compressors and selection of the turbines and valves to minimize the total annualized cost, which consists of the operational and capital expenses. The model is tested for its applicability in three case studies, including a cryogenic application. The results indicate that the energy integration reduces the quantity of utilities required, thus decreasing the overall cost.

Rehabilitating, repairing and restoring against demolishing, tearing down and destroying: the recovery of the military fort for the Santa Pola town museum

This communication develops the process of interventions of the Renaissance fortress of a new plant built in 1554–57 in Santa Pola. It is one of the earliest examples built with reference to military architecture theoretical treaties (XV–XVI) and best preserved. The study runs its own story from its initial military use, through the use of civil equipment until the final cultural and Museum Center. First, the project of Italian origin is examined and its use as barracks for troops for a duration of three centuries (1557–1850), pointing out the architectural constants of war machinery in a defense position and its origin as a rainwater collector and cistern: a perfect square with two bastions in which a plan of the uprising is preserved (1778). Secondly, we study the changes in the mentioned architecture throughout a century and a half (1850–1990) after its change of ownership (from the state to the municipality), and as a result of the new use as a city hall and public endowment: a market and health and leisure centre, which meant the demolition of defensive elements and the opening up to the outside of the inner parade ground. And thirdly, the new transfer of the municipal offices brings in the beginning of a project of transformations (1990–2015) that retrieves the demolished elements at the same time as it assigns the entire fort for a cultural centre: exhibition, research and history museum, promoting the identity between the citizens and the building which stands in the foundations of their city. The conclusions take us through an interesting route that goes from the approach of defensive tactics, its use as administrative headquarters to the current cultural policy of preservation. In addition, all the known plans of the fort are recovered (of military, civil and cultural use), some unpublished, as well as the project of the North wing that has guided the last operation and which has been set as a pattern of reference.

Uranium production process designs for leached zone plants.

"This volume is the seventh in a series of reports dealing with the processing of the leached zone portion of the Florida phosphate producing area for the recovery of uranium and associated products."

Uranium production : process designs for leached zone plants.

"This volume is the eighth in a series of reports pertaining to proposed plants for the recovery of uranium tetrafluoride, alumina and ammonium phosphate from processing of leached zone portion of Florida phosphate producing area."--Page 5.

Referral to rehabilitation following traumatic brain injury: practitioners and the process of decision-making

The study aimed to examine the factors influencing referral to rehabilitation following traumatic brain injury (TBI) by using social problems theory as a conceptual model to focus on practitioners and the process of decision-making in two Australian hospitals. The research design involved semi-structured interviews with 18 practitioners and observations of 10 team meetings, and was part of a larger study on factors influencing referral to rehabilitation in the same settings. Analysis revealed that referral decisions were influenced primarily by practitioners' selection and their interpretation of clinical and non-clinical patient factors. Further, practitioners generally considered patient factors concurrently during an ongoing process of decision-making, with the combinations and interactions of these factors forming the basis for interpretations of problems and referral justifications. Key patient factors considered in referral decisions included functional and tracheostomy status, time since injury, age, family, place of residence and Indigenous status. However, rate and extent of progress, recovery potential, safety and burden of care, potential for independence and capacity to cope were five interpretative themes, which emerged as the justifications for referral decisions. The subsequent negotiation of referral based on patient factors was in turn shaped by the involvement of practitioners. While multi-disciplinary processes of decision-making were the norm, allied health professionals occupied a central role in referral to rehabilitation, and involvement of medical, nursing and allied health practitioners varied. Finally, the organizational pressures and resource constraints, combined with practitioners' assimilation of the broader efficiency agenda were central factors shaping referral. (C) 2004 Elsevier Ltd. All rights reserved.

Upper limb recovery after stroke: The stroke survivors' perspective

Purpose. This study investigated stroke survivors' perspective of upper limb recovery after stroke. The aim was to determine factors other than medical diagnosis and co-morbidities that contribute to recovery. The objectives were to explore how stroke survivors define recovery, identify factors they believe influence recovery and determine strategies used to maximize upper limb recovery. Method. A qualitative study consisting of three focus groups and two in-depth interviews was conducted with stroke survivors (n = 19) and spouses ( n = 9) in metropolitan, regional and rural Queensland, Australia. Data were analysed using principles of grounded theory. Results. Stroke survivors maximize upper limb recovery by 'keeping the door open' a process of continuing to hope for and work towards improvement amidst adjusting to life with stroke. They achieve this by 'hanging in there', 'drawing on support from others', 'getting going and keeping going with exercise', and 'finding out how to keep moving ahead'. Conclusions. This study provides valuable insight into the personal experience of upper limb recovery after stroke. It highlights the need to develop training strategies that match the needs and aspirations of stroke survivors and that place no time limits on recovery. It reinforces the benefits of stroke support groups and advocates their incorporation into stroke recovery services. These findings can be used to guide both the development and evaluation of stroke survivor centred upper limb training programmes.

An evaluation of different models of water recovery in flotation

Water recovery is one of the key parameters in flotation modelling for the purposes of plant design and process control, as it determines the circulating flow and residence time in the individual process units in the plant and has a significant effect on entrainment and froth recovery. This paper reviews some of the water recovery models available in the literature, including both empirical and fundamental models. The selected models are tested using the data obtained from the experimental work conducted in an Outokumpu 3 m(3) tank cell at the Xstrata Mt Isa copper concentrator. It is found that all the models fit the experimental data reasonably well for a given flotation system. However, the empirical models are either unable to distinguish the effect of different cell operating conditions or required to determine the empirical model parameters to be derived in an existing flotation system. The model developed by [Neethling, SJ., Lee, H.T., Cilliers, J.J., 2003, Simple relationships for predicting the recovery of liquid from flowing foams and froths. Minerals Engineering 16, 1123-1130] is based on fundamental understanding of the froth structure and transfer of the water in the froth. It describes the water recovery as a function of the cell operating conditions and the froth properties which can all be determined on-line. Hence, the fundamental model can be used for process control purposes in practice. By incorporating additional models to relate the air recovery and surface bubble size directly to the cell operating conditions, the fundamental model can also be used for prediction purposes. (C) 2005 Elsevier Ltd. All rights reserved.