Métodos de remoção da mucilagem e qualidade fisiológica de sementes de tomate (Lycopersicon esculentum, Mill.)

Objetivando estudar diferentes métodos de remoção da mucilagem e a qualidade de sementes de tomate (Lycopersicon esculentum Mill.), conduziu-se um experimento, em delineamento inteiramente casualizado com quatro repetições. Após extração manual, sementes e mucilagens foram submetidas aos seguintes tratamentos de remoção: lavagem imediata, fermentação por três dias, ácido clorídrico a 2,5% (25 ml/kg, durante 2 horas), ácido acético a 10% (25 ml/kg de material) e hidróxido de amônia a 2,5% (25 ml/kg, durante 2 horas). Seguiu-se a avaliação da qualidade fisiológica das sementes através das determinações de porcentagem de germinação e vigor, pela porcentagem de emergência em areia, condutividade elétrica e pesos das matérias verde e seca de plântulas. Os resultados permitiram concluir que os métodos de remoção por lavagem imediata, fermentação, ácido clorídrico e ácido acético comercial não afetaram a qualidade fisiológica de sementes de tomate; a porcentagem de germinação não foi afetada pelos diferentes métodos de remoção e o método hidróxido de amônia prejudica o vigor das sementes.

Efeito da profundidade de semeadura na emergência de plântulas de tomate (Lycopersicon esculentum Mill.)

Com o objetivo de avaliar o efeito da profundidade de semeadura na emergência de plântulas de tomate (Lycopersicon esculentum Mill.), utilizou-se sementes da cultivar Tropic à profundidade de 0,5; 1,5; 2,5; 3,5; 4.5 e 5,5 cm em substrato solo e areia na proporção de 3:1, mantendo-se constante o teor de água do mesmo em 70% da capacidade de campo. O delineamento experimental empregado foi inteiramente casualizado com quatro repetições de 50 sementes por tratamento, quantificando-se os efeitos das profundidades através das determinações de índice e velocidade de emergência e estande final em porcentagem. Os resultados revelaram que a profundidade de semeadura de 1,5 cm proporcionou índice de velocidade de emergência e estande final, significativamente superiores às demais, razão por que pode ser considerada como a mais indicada à semeadura de tomate.

RESÍDUOS DE FENITROTION em FRUTOS E FOLHAS DETOMATEIRO (Lycopersicon esculentum Mill) ESTAQUEADO

Estudou-se o comportamento dos resíduos de fenitrotion em frutos e folhas de tomateiro estaqueado, através de cromatografia gasosa. O experimento de campo foi instalado quando as plantas tinham 90 dias após o transplante das mudas, e constou de quatro tratamentos: (1) uma aplicação de fenitrotion em dosagem simples, de 100 g i.a./100 litros de água, (2) uma aplicação em dosagem dobrada, de 200 g i.a./100 litros de água, (3) quatro aplicações espaçadas de sete dias, na dosagem simples e (4) testemunha. As amostras de fruto e folha foram colhidas um dia antes da aplicação (-1) e aos zero , 1, 2, 3, 5, 7 e 14 dias após. Basicamente, a metododogia para análises dos resíduos dos frutos e das folhas constou da extração com acetona e partição em clorofórmio; limpeza dos extratos em coluna de florisil (no caso de folhas) e eluição procedida com benzeno. As determinações quantitativas foram feitas por cromatografia gasosa, usando-se detector fotométrico de chama com filtro específico para fósforo. Os resíduos nas folhas foram sempre maiores do que os dos frutos (cerca de 80 vezes, em média) durante todo o período de colheita das amostras. Os valores de meia-vida de degradação de fenitrotion em frutos e folhas foram: 1,6 a 1,9 e 0,7 a 0,8 dia, respectivamente, mostrando uma diminuição mais rápida dos resíduos em folhas. As meias-vidas de persistência foram semelhantes para os dois substratos: 4,2 a 7,3 e 5,6 a 6,2 dias, respectivamente. Os resíduos encontrados nos frutos logo após a aplicação, foram menores que a tolerância oficial (0,5 ppm) para os tratamentos que utilizaram 100 g i.a./100 litros em uma ou quatro pulverizações espaçadas de sete dias. Uma única aplicação de 200 g i.a./100 litros resultou em resíduos menores que 0,5 ppm, desde um dia após a aplicação.

Reguladores vegetais e a anatomia da folha de tomate (Lycopersicon esculentum Mill.) cv. Ângela Gigante

O objetivo do presente trabalho foi verificar os efeitos dos reguladores vegetais GA3 50 mg.l-1, NAA 100 mg.l-1, CCC 1500 mg.l-1 e SADH 3000 mg.l-1 em folhas de tomate, Lycopersicon esculentum Mill. cv. 'Ângela Gigante'. Os promotores de crescimento aumentaram o número de estômatos por milímetro quadrado na epiderme adaxial e diminuíram o número de células epidérmicas em ambos os lados da folha. em relação ao controle, os retardantes de crescimento aumentaram em maior nível a espessura do parênquima lacunoso do que os promotores de crescimento.

On Ti-18Si-6B and Ti-7.5Si-22.5B powder alloys prepared by high-energy ball milling and sintering

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biomass production and chemical composition of Lippia alba (Mill.) NEBr. ex Britt & Wilson in leaves on different plant parts in different seasons

Lippia alba, family Verbenaceae, is widely spread in Central and South American. It's a shurb with a quadrangular branch reaching 1,7m tall. The leaves are membranaceous, petiolate, pubescent with a strong flavor. It's limbs have variable forms with pointed apex, cuneiform or decumbent base, and serrated or crenated hordes. It was determined the best harvest season to biomass production, essential oil content and chemical composition, on different plant parts (apical, medium, basal). It has been observed that, both apical and medium parts represented around 80 % of the fresh leaf mass. The foliar biomass yields are about 5 ton/ha in four harvests during an year. The average yield of essential oil considering the three plant parts were 0.15%, 0.47%, 0.46%, 0.55% and 0.61% for summer/98, autumn/98, winter/98, spring/98 and summer/99, respectively. Essential oils showed similar chemical composition either in relation to seasonality, neral, geranial and t-cariofilene were the majority compounds.

Stem anatomy of Lycopersicon esculentum Mill. treated with different plant growth regulators

The effects of plant growth regulators GA(3) 50 mg. L-1, NAA 100 mg. L-1, CCC 1500 mg.L-1 and SADH 3000 mg.L-1 on stem anatomy of Lycopersicon esculentum Mill cv. Angela Gigante were studied. Two sets of experiments were carried out in greenhouse during two separte periods. Anatomical studies,revealed that growth promoters induced increased xylem thickness and increased the number of tracheary elements while the growth retardants decreased xylem thickness and induced fiber formation.

Dielectric and piezoelectric properties of the mechanochemically prepared PZT ceramics

Mechanochemical synthesis was applied to obtain nanocrystalline powders of composition Pb(Zr0.52Ti0.48)O-3 (PZT). Milling was performed in a planetary ball mill using vials and balls made of zirconia or steel-in order to investigate influence of milling media on the electrical properties of resulting ceramics. PZT ceramics showed high values for dielectric constant (epsilon(r)), reaching 970 at room temperature, as well as low dielectric loss (tandelta) under the optimal processing conditions. High values of remanent polarization (P-r) indicate high internal polarizability. The best samples showed piezoelectric strain constant d(33) = 347 pC/N and planar coupling factor k(P) = 0.44. Milling in ZrO2 medium prevents powder contamination and provides reproducibility of milling process. Also, PZT obtained from the powders milled in ZrO2 exhibited lower values of dielectric loss, in comparison with the PTZ obtained from the powders milled in Fe. This suggests that contamination of the powder with Fe could result in an increase of conductivity in final product. (C) 2004 Kluwer Academic Publishers.

Mechanochemical synthesis of barium titanate

A powder mixture of BaO and TiO2, was mechanochemically treated in a planetary ball mill in an air atmosphere for up to 4 h, using zirconium oxide vial and zirconium oxide balls as the milling medium. Mechanochemical reaction leads to the gradual formation of BaTiO3 phase. Phase evolution during synthesis and changes in powder size and morphology were monitored by XRD, DSC, IR and TEM analysis and it was shown that the formation of BaTiO3 phase was initiated after 60 min. Extended time of milling directed to formation of higher amount of BaTiO3 perovskite phase. Barium titanate with good crystallinity was formed after 240 min sintering without pre-calcination step was performed at 1330 degrees C for 2 It within heating rate 10 degrees C/min. (c) 2005 Elsevier Ltd. All rights reserved.

Effect of substrata on the development of stem cuttings of Lippia alba (Mill.) NEBR. - Limonene-carvone chemotype

Studies were conducted to show the effect of different substrata on the development of stem cuttings of Lippia alba made of limonene-carvone chemotype. The experiment was done in the College of Agronomical Sciences, UNESP, Botucatu, SP, Brazil in 2000. The cuttings were planted in polystyrene trays consisting of 72 cells. The cuttings had about 0.20 m of length and were put in the following substrata:Fine sand (T1), commercial substratum (T2), carbonised rice peel and local soil (T3), local soil, cow manure and carbonised rice peel (T4), vermiculite (T5), and carbonised rice peel (T6). After 40 days the development of stem cuttings were evaluated. High rate of rooting of stem cuttings was verified, with average of 95 10 and no significant difference between the treatments. In relation to dry mass of aerial parts and dry mass of roots, significant differences were found. For dry mass production of aerial parts the commercial substratum (T2) and the local soil, cow manure, carbonised rice peel (T4) were optimal. For mass of roots the local soil, cow manure, carbonised rice peel (T4) proved to be the best.

Mechanochemical synthesis of PZT powders

PZT ceramic powders were successfully prepared from the mixture of PbO, ZrO2 and TiO2 by mechanochemical synthesis in a planetary ball mill, under different milling conditions. Phase evolution during synthesis was monitored by X-ray diffraction analysis. Intensive milling resulted in formation of the nanocrystalline, perovskite PZT powders after 1 h of milling. This is a significant improvement in comparison to milling conditions reported by other authors. Depending on milling parameters the presence of some other phases, such as unreacted ZrO2, was also detected in some samples. The changes in powder size and morphology due to intensive milling, were determined by SEM and TEM, while BET analysis was used to determine specific surface area of the powders. Conclusions about processes taking place during mechanochemical synthesis of PZT powders were made based on the results of characterization. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Ferroelectric properties of mechanically synthesized nanosized barium titanate

Barium titanate ceramics were prepared through mechanochemical synthesis starting from fresh prepared barium oxide and titanium oxide in rutile form. Mixture of oxides was milled in zirconia oxide jar in the planetary ball-mill during 30, 60, 120 and 240 min. Extended time of milling directed to formation of higher amount of barium titanate perovskite phase. Barium titanate with good crystallinity was formed after 240 min. Sintering without pre-calcinations step was performed at 1330 degrees C for 2 hours with heating rate of 10 degrees C/min. The XRD, DSC, IR and TEM analyses were performed. Electric and ferroelectric properties were studied. Very well defined hysteresis loop was obtained.

A neural network-based preset generation tool for a steel tandem cold mill

This paper traces the development of a software tool, based oil a combination of artificial neural networks (ANN) and a few process equations. aiming to serve as a backup operation instrument in the reference generation for real-time controllers of a steel tandem cold mill By emulating the mathematical model responsible for generating presets under normal operational conditions, the system works as ail option to maintain plant operation in the event of a failure in the processing unit that executes the mathematical model. The system, built from the production data collected over six years of plant operation, steered to the replacement of the former backup operation mode (based oil a lookup table). which degraded both product quality and plant productivity. The study showed that ANN are appropriated tools for the intended purpose and that by this instrument it is possible to achieve nearly the totality of the presets needed by this land of process. The text characterizes the problem, relates the investigated options to solve it. justifies the choice of the ANN approach, describes the methodology and system implementation and, finally, shows and discusses the attained results. (C) 2009 Elsevier Ltd. All rights reserved

Structure and Properties of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis

Bi4Ti4O15 [BBT], a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of BaTiO3 [BT] and Bi4Ti3O12 [BIT] obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. BBT ceramics were sintered at 1100C for 4 h without pre-calcination step within heating rate 10C/min. The formation of phase and crystal structure of BT, BIT and BBT were approved using X-ray analysis. The morphology of obtained powders and microstructure were exhamined using scanning electron microscopy. The electrical properties of sintered samples were carried out.