Avaliação de vigas de madeira de Castanho tendo por base a classificação visual e ensaios não destrutivos

Dissertação de mestrado Internacional em Sustentabilidade do Ambiente Construído

Desenvolvimento de materiais auxéticos para aplicações estruturais

Dissertação de mestrado integrado em Engenharia Civil

Caracterização Geológica e Geotécnica das Unidades Litológicas da Cidade da Praia (Santiago - Cabo Verde)

Este trabalho produz uma avaliação das características geológicas e geotécnicas de um território da ilha de Santiago, Cabo Verde, incidindo sobre a cidade da Praia e a área envolvente. Os objectivos principais do trabalho são a representação cartográfica das unidades litológicas, com uma proposta de coluna litológica sintética, a correlação com as unidades geológicas definidas por outros autores, bem como a realização de um conjunto de ensaios in situ e análises laboratoriais visando a caracterização dos parâmetros físicos e mecânicos das diferentes unidades litológicas definidas para a área em estudo. É efectuada uma compilação sobre as principais investigações geológicas realizadas em Cabo Verde, desde o séc. XIX até a actualidade, assim como a descrição das características geológicas da ilha de Santiago e dos principais processos de formação e evolução das formas de relevo e dos recursos naturais (hídricos e solos). A pesquisa incluiu uma revisão dos conceitos descritivos de caracterização dos vulcanitos e vulcanoclastitos presentes e compreendeu a redefinição das unidades litológicas da região, a respectiva representação cartográfica na escala 1: 10.000 (com maior detalhe do que a informação pré-existente) e o levantamento de campo dos principais alinhamentos estruturais. São igualmente apresentados os resultados do tratamento das bandas espectrais de imagens de satélite que suportam a definição das unidades litológicas, bem como dos principais alinhamentos tectónicos que afectam as unidades da área de estudo. Para a caracterização das diferentes unidades litológicas com base nas propriedades in situ, recorreu-se a perfis-tipo, estabelecendo uma descrição das características mineralógicas, petrográficas, texturais e estruturais das materiais presentes. Os materiais foram igualmente ensaiados in situ e amostrados para uma caracterização laboratorial. Os resultados dos ensaios geotécnicos, geomecânicos, mineralógicos e de radioactividade natural permitiram refinar a cartografia proposta e estabelecer parâmetros de comportamento para as 30 unidades litológicas consideradas, a partir de intervalos de valores não homogéneos, contudo representativos da variabilidade observada. Com base nestes resultados são apresentados valores indicativos de aptidão dos materiais, nomeadamente para fundações de edifícios, aterros, construção e potencial hidrogeológico.

Aerodynamical instability of web

Diplomityön tavoitteena oli tutkia miten ilman turbulenttisuus vaikuttaa tasaisesti liikkuvan rainan tilaan. Yhtenä sovelluskohteena teollisuudessa voidaan mainita esimerkiksi leiju-kuivain. Tiedetään, että konenopeuksien kasvu ja siitä johtuva ilmavirran nopeuden kasvu aiheuttaa voimavaikutuksia rainaan ja voi aiheuttaa lepatusta. Lepatus johtaa dynaamiseen epästabiilisuuteen, joka voidaan havaita, kun lineaarinen systeemi tulee epävakaaksi ja joh-taa epälineaariseen, rajoitettuun värähtelyyn. Lepatus huonontaa tuotteiden laatua ja voi johtaa ratakatkoihin. Työssä on esitetty tietoa ilman ja rainan vuorovaikutuksesta, jota hyödyntämällä voidaan kehittää yksinkertaistettu malli, jonka avulla liikkuvaa rainaa voidaan simuloida kuivaimes-sa. Kaasufaasin virtausyhtälöt on ratkaistu eri turbulenttimalleja käyttäen. Myös viskoelas-tisen rainan muodonmuutosta on tarkasteltu. Koska rainalle ei ole kirjallisuudesta saatavilla tarkkoja fysikaalisia ja mekaanisia arvoja, näitä ominaisuuksia testattiin eri arvoilla, jotta rainan käyttäytymistä jännityksen alaisena voidaan tarkastella. Näiden ominaisuuksien tun-teminen on ensiarvoisen tärkeää määritettäessä rainan aeroviskoelastista käyttäytymistä. Virtaussimulointi on kallista ja aikaa vievää. Tämä tarkoittaa uusien tutkimusmenetelmien omaksumista. Tässä työssä vaihtoehtoisena lähestymistapana on esitetty yksinkertaistettu malli, joka sisältää ilman ja rainan vuorovaikutusta kuvaavat ominaisuudet. Mallin avulla saadaan tietoa epälineaarisuuden ja turbulenssin vaikutuksesta sekä monimutkaisesta yh-teydestä stabiilisuuden ja ulkoisesti aikaansaadun värähtelyn sekä itse aiheutetun värähtelyn välillä. Työn lopussa on esitetty havainnollinen esimerkki, jolla voidaan kuvata olosuhteita, jossa rainan tasainen liike muuttuu epävakaaksi. Kun turbulenttisuudesta johtuva painevaih-telu ylittää tietyn rajan, rainan värähtely kasvaa muuttuen satunnaisesta järjestäytyneeksi. Saaduttulokset osoittavat, että turbulenttisuudella on suuri vaikutus eikä sitä voi jättää huomioimatta. Myös rainan viskoelastiset ominaisuudet tulee huomioida, jotta rainan käyt-täytymistä voidaan kuvata tarkasti.

Évaluation de la toxicité du béryllium en fonction de la forme chimique et de la taille des particules

Le béryllium (Be) est un métal dont les propriétés physiques et mécaniques sont très recherchées, notamment dans les secteurs spatial, énergétique et électronique. Les principaux effets associés à l’exposition au Be sont la sensibilisation et la bérylliose chronique. La prévalence des effets associés au Be suggère que les risques sont, entre autres, fonction de sa spéciation. Par ailleurs, il semble que les particules fines constituent la fraction d’intérêt pour l’occurrence de tels effets. Dans cette étude nous avons vérifié l’hypothèse que la forme chimique et la taille des particules du Be jouent un rôle majeur au niveau de la toxicité et de l’apparition d’effets spécifiques à une exposition au Be. Les effets spécifiques se traduisent, entre autres, par la formation de granulomes inflammatoires pulmonaire, par la prolifération de lymphocytes TCD4+ et la production de cytokines de type Th1. Pour chacune des trois formes chimiques visées par la présente étude (le Be métallique ou Be, l’oxyde de Be ou BeO et l’alliage Be aluminium ou BeAl), la toxicité a été évaluée à la suite d’une exposition subchronique par inhalation oro-nasale à des particules fines (F) et totales (T). À cette fin, un modèle animal (souris) a été utilisé. Au total, 245 souris ont été utilisées. Elles ont été subdivisées en sept groupes de 35 souris. Un groupe a servi de contrôle, alors que chacun des six autres a été exposé soit à des particules fines soit à des particules totales, pour chacune des trois formes chimiques de Be (Be-F, Be-T, BeO-F, BeO-T, BeAl-F, BeAl-T). La durée d’exposition pour chacun des groupes s’est étendue sur 3 semaines, 5 jours par semaine, 6 heures par jour. Le niveau d’exposition des souris était de 250 µg/m3. L‘urine des souris a été recueillie avant et durant l’exposition. Au moment du sacrifice, plusieurs tissus (poumon, rate, foie et reins) ainsi que des échantillons de sang ont été prélevés puis immédiatement congelés jusqu’à leur analyse pour la détermination de leur teneur en Be. De plus, certains poumons et rates ont été analysés pour l’évaluation de la sensibilité immunologique et de l'inflammation pulmonaire. Cette étude d’exposition subchronique est la première étude murine qui étudie les effets toxiques de différentes tailles particulaires sur les changements pathologique et immunologique similaires à ceux observés chez l’humain. Cette étude a permis de constater qu’il existait des différences importantes au niveau de la toxicité du Be d’après les différentes tailles particulaires à l’étude. Ces différences seraient reliées au dépôt des particules de Be dans les voies respiratoires et également à la capacité des voies respiratoires à les éliminer totalement ou partiellement. La clairance respiratoire est fonction, notamment, du site de déposition et du caractère soluble ou non des particules. Cette recherche aura également permis de démontrer que les souris C3H/HeJ représentent un bon modèle pour l’étude des effets toxicologiques et immunologiques d’une exposition au Be. De plus, nos résultats démontrent que la sévérité des lésions pulmonaires causées par le Be, tel que l’infiltration interstitielle de lymphocytes et la formation de granulomes non-caséeux, augmente avec le temps de résidence pulmonaire des particules de Be. Combinés à d’autres résultats, nos résultats contribueront à guider les actions de prévention relativement à l’exposition au Be, incluant éventuellement la révision de la valeur limite de l’exposition et possiblement l’établissement de valeurs limites en fonction de la forme chimique et de la taille des particules.

Applications of cardanol in rubber processing

This research project explores the utilization of cardanol in various capacities for rubber processing. Cardanol is a phenol with a long side chain in the meta position of the benzene ring. It is obtained by the vacuum distillation of cashew Hut shell liquid (CNSL) which is a cheap agro-byproduct. In this study, the plasticizer property of cardanol was investigated in silica filled and HAF black filled NR, NBR, EPDM and CR by comparing cure characteristics and mechanical properties of vulcanizates containing conventional plasticizer with those containing cardanol as plasticizer. The co-activator, antioxidant and accelerator properties were investigated in gum samples of NR, NBR, EPDM and CR by comparing the properties of vulcanizates which contain conventional co-activator, antioxidant and accelerator with those in which each of them was replaced by cardanol. The general effectiveness of cardanol was investigated by determination of cure time , measurement of physical and mechanical properties, ageing studies, crosslink density, extractability, FTIR spectra, TGA etc.The results show that cardanol can be a substitute for aromatic oil in both silica filled and HAF black filled NR. Again, it can replace dioctyl phthalate in both silica filled and HAF black filled NBR. Similarly, cardanol Can replace naphthenic oil in silica filled as well as HAF black filled EPDM and CR. The cure characteristics and mechanical properties are comparable in all the eight cases. The co-activator property of cardanol is comparable to stearic acid in all the four rubbers. The cure characteristics and mechanical properties in this case are also comparable. The antioxidant ,property of cardanol is comparable to TQ in all the four rubbers. The antioxidant property of cardanol is comparable to TQ in all the four case of NBR and EPDM.The accelerator property of cardarlol is comparable with CBS in the case of NBR and EPDM. No accelerator property is observed in the case of NR. The accelerator property of cardanol in CR is not negligible when compared with TMTD.

A Study On The Utilisation Of Plastic Wastes In Stabilised Masonry Blocks

At this era of energy crisis and resource depletion, availability of conventional materials throughout the year in quantity and quality, pose a hectic problem for the builders. Adding fuel to the fire, the demand of these materials increases day by day, since the housing and habitat requirements exponentially increase time to time. There is an international concern over this crisis and researchers are reorienting themselves, so as to evolve appropriate masonry units, using locally available cheap materials and technology. The concept of green material and construction has been well conceived in the research so that marginal materials and unskilled labour can be employed for the mass production of building blocks. In this context, considering earth as a sustainable material, there is a growing interest in the use of it, as a modern construction material. Solid waste management is one of the current major environmental concerns in our country. Our country is left with millions of cubic metre of waste plastics. One of the methods to satisfactorily address this solid waste management and the environmental issues is to suitably accommodate the waste in some form (as fibres). Their employability in block making in the form of fibres (plastic fibre- mud blocks) can be investigated through a fundamental research. Also, the review of the existing literature shows that most studies on natural fibres are focussed on cellulose based/ vegetable fibres obtained from renewable plant resources except in very few cases, where animal fibre, plastic fibre and polystyrene fabric were used. At this context, for the plastic fibre-mud blocks to be more widely applicable, a systematic quantification of the relevant physical and mechanical properties of the fibre masonry units is crucial, to enable an objective evaluation of the composite material’s response to actual field condition. This research highlights the salient observations from the detailed investigation of a systematic study on the effect of embedded fibres, made of plastic wastes on the performance of stabilised mud blocks.

Estudo de solos subtropicais visando o emprego na construção de habitações de baixo custo

Esta pesquisa visa o estudo de características físicas e mecânicas de solos subtropicais, para aplicação na construção de habitações de baixo custo, abordando-se principalmente a técnica de construção com paredes monolíticas compactadas. A opçao pelo estudo do solo, realizado sem a adição de estabilizantes fisico-químicos, baseia-se no fato de que a mesma nem sempre é necessária, embora seja vital em alguns casos. Através da revisão de literatura, são ressaltadas as propriedades dos solos consideradas importantes para construção deste tipo de moradia, bem como os fatores envolvidos na durabilidade da mesma. Foi realizado o estudo de jazidas de solos, pertencentes a algumas das unidades geotécnicas da região metropolitana de Porto Alegre, levando-se sempre em conta este tipo de aplicação. Para tanto, são realizados ensaios laboratoriais de caracterização física dos solos, bem como de comportamento mecânico, testando-se resistência à compressão simples e à erosão, e absorção por capilaridade. Além disso, é feita a análise qualitativa da durabilidade de blocos compactados frente a exposição ao tempo. Estes blocos visam simular a condição de pequenos segmentos de paredes. Os resultados obtidos são analisados e comparados com as recomendações da prática deste tipo de construção, avaliando-se a validade das mesmas para o caso de solos tropicais e subtropicais

Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilos

Dutra, R. P. S.; Varela,M. L.; Nascimento, R. M. ; Gomes, U. U. ; Martinelli1, A. E. ; Paskocimas, C. A. Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilosa. Cerâmica [online]. 2009, vol.55, n.333, pp. 100-105. ISSN 0366-6913. doi:Disponivem em: . Acesso em: 04 out. 2010.

Caracterização termo-mecânica de interconectores metálicos recobertos com filmes de LaCrO3

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Desenvolvimento de bloco de vedação com barita na composição de partida para blindagem de radiação X

This work main objective is to study the use of bricks in barium X-rays rooms in order to contribute to the optimization of shielding rooms diagnosis. The work was based on experimental measurements of X-ray attenuation (40 to 150 kV), using ceramic seal bearing the incorporation of barium sulfat (BaSO4). Different formulations were studied in three different firing temperatures and evaluated for incorporation in the ceramic body. The composition of 20% of barite processed at a temperature of 950 ° C showed better physical and mechanical properties, is considered the most suitable for the purpose of this work. Were produced bricks sealing composition formulated based on that presented the best technological features. These blocks were tested physically as a building material and wall protective barrier. Properties such as visual, deviation from the square, face flatness, water absorption and compressive strength were evaluated for all the blocks produced. The behavior of this material as attenuator for X-rays was investigated by experimental results which take into account mortar manufacturers barium through the different strains and compared with the reference material (Pb). The simulation results indicated that the ceramic block barium shows excellent properties of attenuation equivalence lead taking into account the energy used in diagnostic X-ray

Estudo da adição do resíduo proveniente da extração de minério de ferro em argilas do Rio Grande do Norte

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas

This research presents an overview of the addition steelwork dust of ceramic shingles in order to contribute to the utilization use of such residue. The ceramic industry perspective in the Brazilian State of Piauí is quite promising. Unlike other productive sectors, the ceramic industry uses basically natural raw materials. Its final products are, in short, the result of transforming clay compounds. These raw materials are composed primarily of aluminum oxide, silicon, iron, sodium, magnesium, end calcium, among others. It was verified that steelwork dust is composed primarily of these same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, 900°C and 950°C. Then t echnological tests of linear shrinkage, water uptake, apparent porosity, apparent density and flexural strengthwere carried at. The results showed the possibility of using steelwork powder in ceramic shingles until 15% significant improvement in physical and mechanical properties. This behavior shows the possibility of burning at temperatures lower than 850ºC, thus promoting a product final cost reduction