Digestive and functional properties of a partially hydrolyzed cassava solid waste with high insoluble fiber concentration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Case study: a 3D resistivity and induced polarization imaging from downstream a waste disposal site in Brazil

A contaminated site from a downstream municipal solid waste disposal site in Brazil was investigated by using a 3D resistivity and induced polarization (IP) imaging technique. This investigation purpose was to detect and delineate contamination plume produced by wastes. The area was selected based on previous geophysical investigations, and chemical analyses carried out in the site, indicating the presence of a contamination plume in the area. Resistivity model has successfully imaged waste presence (rho < 20 Omega m), water table depth, and groundwater flow direction. A conductive anomaly (rho < 20 Omega m) outside wastes placement was interpreted as a contamination plume. Chargeability model was also able to imaging waste presence (m > 31 mV/V), water table depth, and groundwater flow direction. A higher chargeability zone (m > 31 mV/V) outside wastes placement and following conductive anomaly was interpreted as a contamination plume. Normalized chargeability (MN = m/rho) confirmed polarizable zone, which could be an effect of a salinity increase (contamination plume), and the clay presence in the environment.

Influencia de la separación de residuos sólidos urbanos para reciclaje en el proceso de incineración con generación de energía

This work analyses the recuperation of the energy of Municipal Solid Waste (MSW) through the incineration process. It considers the up to date tendency of segregation (separation) of plastic, paper and cardboard, glass and metals and their influence in the fluxes of mass and energy in the incineration system of MSW. For its development was used information related to the generation of MSW in Bauru city and the Combust software. The results so obtained allowed the estimation of the Caloric power of the typical MSW and also of this residue when one considers the separations of paper/cardboard and plastic for recycling.

Brazil's new national policy on solid waste: challenges and opportunities

Brazil, one of the world's largest developing countries, has recently introduced a new solid waste management regulatory policy. This new regulatory policy will have implications for a wide variety of stakeholders and sets the stage for opportunities and lessons to be learned. These issues are discussed in this article. © 2013 Springer-Verlag Berlin Heidelberg.

Códigos, reglamentos y normas sobre abastecimiento de agua, saneamiento y eliminación de desechos sólidos con especial atención a las necesidades de las comunidades de bajos ingresos en América Latina y el Caribe = Codes, regulations and standards on water supply, sanitation and solid-waste disposal with emphasis on low-income community requirements in Latin America and the Caribbean

Incluye Bibliografía

Prospects for the use of municipal tree pruning wastes in particleboard production

The purpose of this study was to evaluate the physical and mechanical properties of particleboard made with pruning wastes from Ipê (Tabebuia serratifolia) and Chapéu-de-Sol (Terminalia catappa) trees. Particleboards were prepared with both wood species, using all the material produced by grinding the pruning wastes. The particleboards had dimensions of 45×45 cm, a thickness of approximately 11.5 mm and an average density of 664 kg/m3. A urea-formaldehyde adhesive was used in the proportion of 12% of the dry particle mass. The particleboards were pressed at a temperature of 130 C for 10 mins. The physical and mechanical properties analyzed were density, moisture content, thickness swelling, percentage of lignin and cellulose, modulus of resilience, modulus of elasticity and tensile strength parallel to the grain, accordingly to the standards NBR 14810 and CS 236-66 (1968). The particleboards were considered to be of medium density. The particle size significantly affected the static bending strength and tensile strength parallel to the grain. Ipê presented better results, demonstrating a potential for the production and use of particleboard made from this species. © The Author(s) 2013.

Potencial de geração de energia elétrica a partir de resíduos sólidos urbanos para Bauru e região

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise econômica preliminar da implantação de incinerador de resíduos sólidos urbanos na região de Bauru

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Kinetic study of pyrolysis of castor beans (Ricinuscommunis L) presscake: an alternative use for solid waste arising from the biodiesel production

This work investigated the effects of temperature and of rate of heating on the kinetic parameters of pyrolysis of castor beans presscake, a byproduct generated in the biodiesel production process. Pyrolysis process was investigated by thermogravimetric analysis, and parameters were obtained from nonisothermal experiments. The results obtained from the process of thermal decomposition indicated the elimination of humidity and the decomposition of organic components of the biomass. DTG curves showed that the heating rate affects the temperature of maximum decomposition of the material. Kinetic parameters such as activation energy and pre-exponential factor were obtained by model-free methods proposed by Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), and Kissinger. Experimental results showed that the kinetic parameters values of the FWO and KAS methods display good agreement and can be used to understand the mechanism of degradation of the cake. In a generalized way, the results contribute to better understanding of the processes of biomass pyrolysis.

A geração de resíduos sólidos urbanos e sua influência na gestão urbano-ambiental municipal de Sorocaba/SP

In Brazil, rates of urban solid waste generation increase proportionally more than the annual growing of the population. The government, from its federal authority to the municipal spheres, faces increasing challenges for Urban and Environmental management regarding to solid waste in general and, in particular, municipal solid waste. Financial problems added to public health problems that worsen with the serious environmental impacts generated every year. In August 2010 Brazil the PNRS (National Policy on Solid Waste) was approved and sanctioned in which represented a true watershed in the country as a legal framework extremely ambitious and visionary. This work presents the successes and challenges that the municipality of Sorocaba/SP is facing after more than three years of PNRS sanctioned to conduct an Urban and Environmental management suited to the new legal bases towards the subject of solid waste. The results show a large gap between the content proposed by the law and the technical, financial and temporal reality to practical implementation by the municipal government. New legislation and federal incentives, consortiums among the cities, flexible deadlines and environmental education at all levels are certainly some proposals to catalyze processes that aim to solve and overcome the challenges of solid waste

A política nacional de resíduos sólidos e o plano diretor municipal de Rio Claro/SP: o uso como instrumento para a gestão urbano-ambiental municipal

Due to the large economic development associated with the growing consumerist lifestyle of our capitalist society, the problem of uncontrolled solid waste generation worsens, which one is considered to be one of the main responsible factors for environmental degradation. As a case study and in order to solve the problem of large generation of municipal solid waste, this work aims to study the “plano diretor” of Rio Claro city, São Paulo. The “plano diretor” is a municipal law that provides guidelines for the administration of the city, which include guidelines for the management of solid waste generated in the city. The guidelines required in order to write the “plano diretor” are provided by the national law “estatuto da cidade”, providing information for the planning and development of the cities, as well as the management of the urban environment. However, only the “estatuto da cidade” does not provide enough instructions for creating management plans in order to solve the many problems from the urban environment. Thus, studies have been done about urban and environmental management, to understand how municipal management plans should be structured. As a form of seeking information that can complement the “plano diretor” to the creation of policies for managing solid waste of the city, the “Política Nacional de Resíduos Sólidos”(PNRS) emerges in 2010 as a document which provides principles, objectives and guidelines to create plans for Solid Waste Management at the national, state, regional and municipal levels. Therefore, it was possible to make a joint analysis of the “plano diretor” of Rio Claro with the PNRS to identify what is already done within the municipality about the solid waste management, and identify which aspects are most significant in the municipal solid waste management that the national policy provides. Yet studies have been done on the current municipal solid waste management...

Characterization and thermal study of organic extracts of urban solid waste

The urban residues put in landfill of the city of Sa˜o Carlos-SP, Brazil, in 2004 represent 58.7 % of decomposed organic material. The aim of this research was to characterize samples of urban solid waste and its organic extracts targeting the use of this residue without damaging the environment. The curves were obtained in a nitrogen atmosphere, a heating rate of 20 C min-1 , the temperature of 30–600 C. In the original sample after humidity loss, an event occured concerning the water constitution in the TG curve with an endothermic peak in the DTA curve. There was a presence of inorganic residue in the ashes. The organic matter present in the USR sample disposed in the landfill is constituted by several polarity, organics compounds from the degradation of lignin, cellulose, lipids, and other materials which thermal stabilities are distinct. The hexane extract features in its constitution two fatty acids, stearic and triacontano´ic, which are nonpolar compounds originating from bacteria present in the residue. The acids groups in extract hexane also were evidenced by X-ray diffraction and FTIR.

Coleta de informações para projeto de incinerador regional de resíduos sólidos urbanos (RSU)

The incineration of municipal solid waste has become a very interesting, in order that incineration reduces the amount of solid waste, which would be accumulated in dumps and / or landfill. Furthermore, it is possible to generate electrical energy by use of clean well known technology. To verify the feasibility of installing a plant for the incineration of solid waste with energy recovery, we must consider some basic requirements. For this reason, will be presented in this paper some factors that influence the project to install a plant of incineration with energy recovery.