Optical fibre sensors and their applications in the industrial weighing and aerospace industries

This thesis presents the design, fabrication and testing of novel grating based Optical Fibre Sensor (OFS) systems being interrogated using “off the shelf” interrogation systems, with the eventual development of marketable commercial systems at the forefront of the research. Both in the industrial weighing and aerospace industries, there has been a drive to investigate the feasibility of using optical fibre sensors being deployed where traditionally their electrical or mechanical counterparts would traditionally have been. Already, in the industrial weighing industry, commercial operators are deploying OFS-based Weigh-In-Motion (WIM) systems. Likewise, in the aerospace industry, OFS have been deployed to monitor such parameters as load history, impact detection, structural damage, overload detection, centre of gravity and the determination of blade shape. Based on the intrinsic properties of fibre Bragg gratings (FBGs) and Long Period Fibre Gratings (LPFGs), a number of novel OFS-based systems have been realised. Experimental work has shown that in the case of static industrial weighing, FBGs can be integrated with current commercial products and used to detect applied loads. The work has also shown that embedding FBGs in e-glass, to form a sensing patch, can result in said patches being bonded to rail track, forming the basis of an FBG-based WIM system. The results obtained have been sufficiently encouraging to the industrial partner that this work will be progressed beyond the scope of the work presented in this thesis. Likewise, and to the best of the author’s knowledge, a novel Bragg grating based systems for aircraft fuel parameter sensing has been presented. FBG-based pressure sensors have been shown to demonstrate good sensitivity, linearity and repeatability, whilst LPFG-based systems have demonstrated a far greater sensitivity when compared to FBGs, as well the advantage of being potentially able to detect causes of fuel adulteration based on their sensitivity to refractive index (RI). In the case of the LPFG-based system, considerable work remains to be done on the mechanical strengthening to improve its survivability in a live aircraft fuel tank environment. The FBG system has already been developed to an aerospace compliant prototype and is due to be tested at the fuel testing facility based at Airbus, Filton, UK. It is envisaged by the author that in both application areas, continued research in this area will lead to the eventual development of marketable commercial products.

A European competence framework for industrial pharmacy practice in biotechnology

Project Report: The PHAR-IN ("Competences for industrial pharmacy practice in biotechnology") looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a biotechnology competence framework by drawing up an initial list of competences then ranking them in importance using a three-stage Delphi process. The framework was next evaluated and validated by a large expert panel of academics (n = 37) and industrial employees (n = 154). Results show that priorities for industrial employees and academics were similar. The competences for biotechnology practice that received the highest scores were mainly in: . "Research and Development", . "Upstream" and "Downstream" Processing', " . "Product development and formulation", " . "Aseptic processing", ."Analytical methodology", . "Product stability", and . "Regulation". The main area of disagreement was in the category "Ethics and drug safety" where academics ranked competences higher than did industrial employees.

Industrial Discharges of Metals in Kigali, Rwanda, and the Impact on Drinking Water Quality

Rwanda is a landlocked country located in Africa's Central-East Great Lakes region. It has a population of 7.5 million which occupies 26,338 km'. Its population density (285/km') is one of the highest in the world and has prompted fear of a rapid degradation of the ecosystem. There are no central sewer systems in Rwanda. The use of pit latrines and septic tanks is common in urban and rural areas. People still defecate in the fields (World Bank, 1989). Less than half of the urban population is served by a central water supply. The majority of people get their water untreated from rivers that have been polluted by chemicals and human excreta. In and around the capital city of Kigali, there is a concentration of people, farms, and industries which discharge wastewater into the Nyabarongo River and its tributaries. The Nyabarongo River, a tributary of the Nile, empties into the Akagera River which flows into Lake Victoria. Nyabarongo River water is used for drinking water, cooking, bathing, and agriculture in the Kigali area. There has been very little monitoring of the water quality of the Nyabarongo River and of industrial outfalls located on tributaries of the Nyabarongo River. As a first step in understanding the water quality of the Nyabarongo River, wastewater samples were collected in 1993 from industrial outfalls located on tributaries of the Nyabarongo River. Most of the facilities sampled had no wastewater treatment. The impact of these discharges on the water quality of the Nyabarongo River was evaluated.

Enhancing non-refractory aerosol apportionment from an urban industrial site through receptor modelling of complete high time-resolution aerosol mass spectra

Receptor modelling was performed on quadrupole unit mass resolution aerosol mass spectrometer (Q-AMS) sub-micron particulate matter (PM) chemical speciation measurements from Windsor, Ontario, an industrial city situated across the Detroit River from Detroit, Michigan. Aerosol and trace gas measurements were collected on board Environment Canada’s CRUISER mobile laboratory. Positive matrix factorization (PMF) was performed on the AMS full particle-phase mass spectrum (PMFFull MS) encompassing both organic and inorganic components. This approach was compared to the more common method of analysing only the organic mass spectra (PMFOrg MS). PMF of the full mass spectrum revealed that variability in the non-refractory sub-micron aerosol concentration and composition was best explained by six factors: an amine-containing factor (Amine); an ammonium sulphate and oxygenated organic aerosol containing factor (Sulphate-OA); an ammonium nitrate and oxygenated organic aerosol containing factor (Nitrate-OA); an ammonium chloride containing factor (Chloride); a hydrocarbon like organic aerosol (HOA) factor; and a moderately oxygenated organic aerosol factor (OOA). PMF of the organic mass spectrum revealed three factors of similar composition to some of those revealed through PMFFull MS: Amine, HOA and OOA. Including both the inorganic and organic mass proved to be a beneficial approach to analysing the unit mass resolution AMS data for several reasons. First, it provided a method for potentially calculating more accurate sub-micron PM mass concentrations, particularly when unusual factors are present, in this case, an Amine factor. As this method does not rely on a priori knowledge of chemical species, it circumvents the need for any adjustments to the traditional AMS species fragmentation patterns to account for atypical species, and can thus lead to more complete factor profiles. It is expected that this method would be even more useful for HR-ToF-AMS data, due to the ability to better understand the chemical nature of atypical factors from high resolution mass spectra. Second, utilizing PMF to extract factors containing inorganic species allowed for the determination of extent of neutralization, which could have implications for aerosol parameterization. Third, subtler differences in organic aerosol components were resolved through the incorporation of inorganic mass into the PMF matrix. The additional temporal features provided by the inorganic aerosol components allowed for the resolution of more types of oxygenated organic aerosol than could be reliably re-solved from PMF of organics alone. Comparison of findings from the PMFFull MS and PMFOrg MS methods showed that for the Windsor airshed, the PMFFull MS method enabled additional conclusions to be drawn in terms of aerosol sources and chemical processes. While performing PMFOrg MS can provide important distinctions between types of organic aerosol, it is shown that including inorganic species in the PMF analysis can permit further apportionment of organics for unit mass resolution AMS mass spectra.

Estimación del descarte y captura incidental en la pesquería industrial de cerco del stock norte-centro de la anchoveta peruana (Engraulis ringens)

Este estudio presenta la validación de las observaciones que realizó el programa de observación pesquera llamado Programa Bitácoras de Pesca (PBP) durante el periodo 2005 - 2011 en el área de distribución donde operan las embarcaciones industriales de cerco dedicadas a la pesca del stock norte-centro de la anchoveta peruana (Engraulis ringens). Además, durante ese mismo periodo y área de distribución, se estimó la magnitud del descarte por exceso de captura, descarte de juveniles y la captura incidental de dicha pesquera. Se observaron 3 768 viajes de un total de 302 859, representando un porcentaje de 1.2 %. Los datos del descarte por exceso de captura, descarte de juveniles y captura incidental registrados en los viajes observados, se caracterizaron por presentar un alta proporción de ceros. Para la validación de las observaciones, se realizó un estudio de simulación basado en la metodología de Monte Carlo usando un modelo de distribución binomial negativo. Esta permite inferir sobre el nivel de cobertura óptima y conocer si la información obtenida en el programa de observación es contable. De este análisis, se concluye que los niveles de observación actual se deberían incrementar hasta tener un nivel de cobertura de al menos el 10% del total de viajes que realicen en el año las embarcaciones industriales de cerco dedicadas a la pesca del stock norte-centro de la anchoveta peruana. La estimación del descarte por exceso de captura, descarte de juveniles y captura incidental se realizó mediante tres metodologías: Bootstrap, Modelo General Lineal (GLM) y Modelo Delta. Cada metodología estimó distintas magnitudes con tendencias similares. Las magnitudes estimadas fueron comparadas usando un ANOVA Bayesiano, la cual muestra que hubo escasa evidencia que las magnitudes estimadas del descarte por exceso de captura por metodología sean diferentes, lo mismo se presentó para el caso de la captura incidental, mientras que para el descarte de juveniles mostró que hubieron diferencias sustanciales de ser diferentes. La metodología que cumplió los supuestos y explico la mayor variabilidad de las variables modeladas fue el Modelo Delta, el cual parece ser una mejor alternativa para la estimación, debido a la alta proporción de ceros en los datos. Las estimaciones promedio del descarte por exceso de captura, descarte de juveniles y captura incidental aplicando el Modelo Delta, fueron 252 580, 41 772, 44 823 toneladas respectivamente, que en conjunto representaron el 5.74% de los desembarques. Además, con la magnitud de la estimación del descarte de juveniles, se realizó un ejercicio de proyección de biomasa bajo el escenario hipotético de no mortalidad por pesca y que los individuos juveniles descartados sólo presentaron tallas de 8 y 11 cm., en la cual se obtuvo que la biomasa que no estará disponible a la pesca está entre los 52 mil y 93 mil toneladas.

Dimensionamento de uma ponte metálica de suporte de uma tela transportadora de inertes a utilizar numa instalação industrial

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

Desenvolvimento de um flotador industrial

A presente dissertação apresenta uma investigação teórica e prática na área de Engenharia e Design de Produto com o objetivo principal de desenvolver um Flotador Industrial para a Adventech, procurando indicadores inovadores, competitivos e focando a necessidade de encontrar uma solução que reflita numa relação entre necessidade, utilizador, performance e design. Desta forma, no presente trabalho cruzam-se temas como a Engenharia e o Design de Produto, Tratamentos de Efluentes Líquidos e Flotação de modo a introduzir e compreender o desenvolvimento deste equipamento. Foi efetuada uma pesquisa sobre o tema para compreender, as suas características e limitações, bem como as formas e mecanismos utilizados para dar resposta aos requisitos e produzir um produto eficiente e eficaz. Paralelamente realizou-se uma abordagem teórica sobre Design de Produto e Processo de Flotação, de modo a conhecer o seu desenvolvimento e as suas restrições, preocupações e objetivos. Complementou-se o trabalho desenvolvido com pesquisa e analisaram-se os produtos existentes na concorrência com o objetivo de conhecer características técnicas, funcionais e físicas. Desta forma, o estudo desenvolvido nesta dissertação serviu e auxiliou o projeto no resultado final, incluindo a materialização do conceito para proporcionar uma boa relação entre utilizador, performance e design. Obtendo assim, um resultado final com características adequadas nas diversas aplicações deste produto nas Estações de Águas Residuais, reduzindo custos de operação e manutenção, eficiência do processo de flotação e vida útil do produto. Paralelamente o design proporciona uma apresentação estética do produto que transmite fiabilidade e profissionalismo.

Industrial synthesis and characterization of nanophotocatalysts materials: titania

Despite the recent synthesis and identification of a diverse set of new nanophotocatalysts that has exploded recently, titanium dioxide (TiO2) remains among the most promising photocatalysts because it is inexpensive, non-corrosive, environmentally friendly, and stable under a wide range of conditions. TiO2 has shown excellent promise for solar cell applications and for remediation of chemical pollutants and toxins. Over the past few decades, there has been a tremendous development of nanophotocatalysts for a variety of industrial applications (i.e. for water purification and reuse, disinfection of water matrices, air purification, deodorization, sterilization of soils). This paper details traditional and new industrial routes for the preparation of nanophotocatalysts and the characterization techniques used to understand the physical chemical properties of them, like surface area, ζ potential, crystal size, and phase crystallographic, morphology, and optical transparency. Finally we present some applications of the industrial nanophotocatalysts.

O património industrial na cidade de Lisboa

Dissertação para obtenção do grau de Mestre em Arquitetura, apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Diseño de un sistema presupuestario para la planificación y control de utilidades de la pequeña empresa industrial dedicada a la elaboración de ropa interior femenina en el área metropolítana de San Salvador. Caso ilustrativo.

La elaboración de este trabajo, consiste en el Diseño de un Sistema Presupuestario en la pequeña empresa industrial dedicada a la elaboración de ropa interior femenina ubicadas en el Area Metropolitana de San Salvador, que le permita al subsector ejecutar los presupuestos operativos y financieros desarrollados con el fin de lograr una adecuada planificación y control de utilidades. Para la elaboración del Sistema Presupuestario, se realizó un diagnóstico a las pequeñas empresas industriales que se dedican a la elaboración de prendas íntimas de vestir femenina con el objeto de hacer un análisis sobre la utilización de la técnica presupuestaria en las actividades y operaciones de la empresa. Asimismo, formular y desarrollar cada uno de los presupuestos a través de un caso ilustrativo que permita llevar a cabo la evaluación y control del Sistema presupuestario Para diagnóstico del subsector en estudio se utilizó en la investigación el método científico auxiliándose del método deductivo utilizando como técnica la entrevista hecha al presidente de la empresa y un cuestionario con preguntas abiertas y cerradas realizadas a las del subsector. Teniendo como resultado que la mayoría de las empresas de esta rama industrial no aplican dicha técnica presupuestaria por falta de conocimientos o recursos para su implementación. Por medio del caso ilustrativo se desarrolló la aplicación del Sistema presupuestario considerándose las generalidades de la empresa (objetivos, políticas, estrategias, filosofía y estructura organizativa); además de los supuestos básicos en los cuales se sustenta el Sistema. En la elaboración de los presupuestos, fue necesario apoyarse en el análisis de los datos históricos de la empresa, además de la experiencia del presidente de la organización. La aprobación del Sistema Presupuestario y la ejecución del mismo es responsabilidad del presidente de la empresa; para lo cual se presenta un plan de implementación del sistema, describiendo los recursos, costo y tiempo para la puesta en marcha del sistema. También es necesario llevar a cabo el control del Sistema Presupuestario, mediante el análisis de las variaciones y así poder implementar las medidas correctivas que lleven al cumplimiento de las metas y objetivos propuestos. Se recomienda a las pequeñas empresas industriales dedicadas a la elaboración de ropa interior femenina la aplicación del presente Sistema Presupuestario para una eficiente planificación y control de utilidades.

Evaluación de la exposición al ruido industrial en los trabajadores de una planta de asfalto, en la provincia del Azuay y propuesta de plan de control

El presente trabajo se realizó en una Planta de Hormigón Asfáltico, donde se realizó el estudio del ruido como factor de riesgo bajo las perspectivas de: Salud Ocupacional, Seguridad e Higiene Industrial. Este enfoque holístico, define la influencia que éste riesgo laboral ejerce sobre la pérdida de agudeza auditiva. Se estableció inicialmente el marco teórico y legal vigente sobre el ruido, posteriormente se describió la metodología de estudio, operatividad de variables, y la muestra a estudiar. Luego se procedió a la caracterización de la población y área estudiada, así como las actividades productivas. Dentro de la Higiene Industrial, se monitoreó la exposición del nivel de presión sonora, se realizó el comparativo con el nivel permisible (TWA 8 horas) establecido en el “Reglamento de Seguridad y Salud de los Trabajadores”, D.E. 2393. En términos de Seguridad Industrial, se analizó el equipo de protección personal EPP utilizado, y las variables determinantes. En el ámbito de Salud Ocupacional, se estudió: características personales de trabajadores, patologías relacionadas con sordera, y un cuestionario de exposición al ruido. Finalmente se determinó la existencia de sobreexposición a ruido laboral en la empresa objeto de estudio, mediante el estudio del estado de salud auditiva de los colaboradores se determinó la gran incidencia de personal sano y finalmente se determinó las medidas de control a implementarse enfatizadas a la realidad descubierta en el presente estudio, las que incluyen cambios en equipos y maquinaria, buenas prácticas de trabajo, planes de adiestramiento y capacitación en todo el personal entre otros.

Deindustrialisation and industrial communities: the Lanarkshire coalfields c.1947-1983

This thesis examines deindustrialisation, the declining contribution of industrial activities to economic output and employment, in Lanarkshire, Scotland’s largest coalfield between the early nineteenth and mid-twentieth century. It focuses on contraction between the National Coal Board’s (NCB) vesting in 1947 and the closure of Lanarkshire’s last colliery, Cardowan, in 1983. Deindustrialisation was not the natural outcome of either market forces or geological exhaustion. Colliery closures and falling coal employment were the result of policy-makers’ decisions. The thesis consists of four thematic chapters: political economy, moral economy, class and community, and generation and gender. The analysis is based on archival sources including Scottish Office reports and correspondence relating to regional policy, and NCB records. These are supported by National Union of Mineworkers Scottish Area and STUC meeting minutes, and oral history testimonies from over 30 men and women with Lanarkshire coalfield backgrounds, as well as two focus groups. The first two chapters analyse the process of deindustrialisation, with the first offering a top-down perspective and the second a bottom-up viewpoint. In chapter one deindustrialisation is analysed through changes in political economy. Shifts in labour market structure are examined through the development of regional policy and its administration by the Scottish Office. The analysis centres upon a policy network of Scottish business elites and civil servants who shaped a vision of modernisation via industrial diversification through attracting inward investment. In chapter two the perspective shifts to community and workforce. It analyses responses to coalfield contraction through a moral economy of customary rights to colliery employment. A detailed investigation of Lanarkshire colliery closures between the 1940s and 1980s emphasises the protracted nature of deindustrialisation. Chapters three and four consider the social and cultural structures which shaped the moral economy but were heavily altered by deindustrialisation. Chapter three focuses on the dense networks that linked occupation, community, and class consciousness. Increasing coalfield centralisation and remote control of pits from NCB headquarters in London, and mounting hostility to coal closures, contributed to an accentuated sense of Scottish-ness. Chapter four illuminates gender and generational dimensions. The differing experiences of cohorts of men who faced either early retirement, redundancy or transfer to alternative sectors, or those who never attained anticipated industrial employment due to final closures, are analysed in terms of constructions of masculinity and the endurance of cultural as well as material losses. This is counterpoised to women who gained industrial work in assembly plants and the perceived gradual attainment of an improved economic and social position whilst continuing to navigate structures of patriarchy.

EL PROCESO DE URBANIZACION EN LA PERIFERIA DEL AREA METROPOLITANA: LOS CASOS DE TURRUCARES Y MONTE DE LA CRUZ

Este avance de investigación pretende ofrecer una visión preliminar de un fenómeno bastante reciente que se está dando en Costa Rica y particularmente en el Valle Central: la urbanización del espacio agrícola. Este proceso se está desarrollando más allá del espacio suburbano y presenta una especialidad diferente, ya que aquí la organización social campesina y las actividades agropecuarias siguen siendo predominantes. Sin embargo, esta extremadamente vinculado con el proceso de metropolizacion que surge en el país. Se está asistiendo, pues, a una reubicación de los espacios residenciales de las clases de mejores ingresos, las cuales influenciadas tal vez por un modelo ideológico importado, buscan poder disfrutar de las ventajas que ofrece el espacio rural pero con la posibilidad de seguir trabajando en la ciudad y seguir gozando de los servicios urbanos. La  rural-urbanización dentro de una estrategia global de estructuración del espacio puede ser considerada como un mecanismo de selección y una apropiación de los mejores lugares donde se dará la futura de expansión urbana. Desde esta perspectiva, resulta interesante llamar la atención de cómo ciertos sectores sociales están proyectando desde ahora la futura expansión del espacio metropolitano.   SUMMARY This preliminary investigative report presents a viewpoint about a very recent phenomenon that is occurring in Costa Rica and especially in the Central Valley: the urbanization of the agrarian space. This process is developing beyond the suburban areas and presents a different spacial structure because in these areas, the rural social structures and the livestock and agricultural activities are still predominant. Nevertheless, such activities are very much related to the urbanization process occurring in the country. As such, we are witnessing a reubication of the residential structure of the high-income classes, of which, influenced perhaps by an improved idiologic model, hope to enjoy the advantages offered by a rural area but also taking advantage of the convenience offered by the urban benefits; plus the opportunity to keep working in the city. The process of rural urbanization conceived in a global strategy of spatial structures, can be considered as a selection and appropriation mechanism of the best areas for the future urban expansion. From this perspective, it is interesting to call attention to the process by which certain social sectors are now projecting the future organization of the metropolitan area.  In reference to the real-estate capital invested in the study areas, and specifically to Costa Rica capital, this investment in the promotion of real-estate, acts as a shelter sector, by changing the course of direction of the capital accumulated in the other economic sectors, especially considering that the real-estate sector insures more secure profits in spite of the relatively insignificant recuperation rate of the capital investment comparison to the industrial sector, where more capital risks occur, above all during an economic crisis.  At present, the zones influenced by rural urbanization are affected by a modification in their productive structure, in other words, what were once agricultural zones, are now converted to residential zones. This produces spectacular changes in the composition of the work force by producing service-oriented employment that leads to the following abandonment of the agricultural activities.  From a social point of view, this rural urbanization pattern provokes a marked spatial segregation, in which an exclusive high income social group with a particularly consuming life style is noted at one level, and on the other, social groups that inhered patterns of rural life with more traditional lifestyles. In reference to the community level in the study areas, localized conflicts have emerged between local people and the new residents. These conflicts are highly conditioned by the insertion in the communities of these new residents.       RESUME   Ce document préliminaire décrit un phénomène assez récent au Costa Rica, qui affecte plus particulièrement la « Vallée Centrale ». il s’agit de l’urbanisation de l’espace agricole.  Ce sont des espaces franchement ruraux, bien au-delà des banlieues, qui sont affectés par ce processus qui, en conséquence, montre des caractères différents: comme se maintien de la organisation social liée aux activités agricoles; en face l’infiltration d’un autre mode de vie dû à sa transformation en espace résidentiel pour classes aux revenus élevés qui, peut-être, influencées par un modèle culturel importé, préfèrent une localisation qui puisée leus offrir à  la fois les avantages de vivre dans un espace rural avec ceux de la ville, lieu de travail suffisamment proche dont elles continuent à pouvoir utiliser ses services. Ce modèle culturel doit être considère en fonction du processus de métropolitain apparu dan le pays. L’urbanisation de l’espace rural, dans une stratégie globale de structuration de l’espace peut se considérer comme un mécanisme de sélection et d’appropriation des meilleurs sites de l’expansion urbaine future.  Dans cette perspective, il est intéressant de constater qu’il existe déjà, de la part certains secteurs sociaux, un projet d’organisation de l’espace métropolitain futur. Le foncier est considéré comme un secteur refuge pour les capitaux nationaux d’où l’intérêt de la spéculation pour ces zones. En effet, ce placement, plus sûr, malgré un plus faible taux de récupération du capital, est préfère à d’ autres- comme l’investissement industriel- plus rentables, mais plus risqués, surtout en temps de crise. L’urbanisation de l’espace rural s’accompagne d’une modification des structures productives : moins d’agriculture et évolution de l’emploi vers le tertiaire liée à la présence de nouveaux résidents. Du point de vue social, cette situation se traduit par une très nette ségrégation spatiale. D’un côte, un group socio-économique aux revenus élèves représentant  la société de consommation ; de l’autre, les ruraux au style de vie plus traditionnel. Il en résulte une certaine tension entre les deux groupes.

Evaluation of seismic losses of RC buildings: the case of the industrial areas after the 2012 Emilia Earthquake

The topic of seismic loss assessment not only incorporates many aspects of the earthquake engineering, but also entails social factors, public policies and business interests. Because of its multidisciplinary character, this process may be complex to challenge, and sound discouraging to neophytes. In this context, there is an increasing need of deriving simplified methodologies to streamline the process and provide tools for decision-makers and practitioners. This dissertation investigates different possible applications both in the area of modelling of seismic losses, both in the analysis of observational seismic data. Regarding the first topic, the PRESSAFE-disp method is proposed for the fast evaluation of the fragility curves of precast reinforced-concrete (RC) structures. Hence, a direct application of the method to the productive area of San Felice is studied to assess the number of collapses under a specific seismic scenario. In particular, with reference to the 2012 events, two large-scale stochastic models are outlined. The outcomes of the framework are promising, in good agreement with the observed damage scenario. Furthermore, a simplified displacement-based methodology is outlined to estimate different loss performance metrics for the decision-making phase of the seismic retrofit of a single RC building. The aim is to evaluate the seismic performance of different retrofit options, for a comparative analysis of their effectiveness and the convenience. Finally, a contribution to the analysis of the observational data is presented in the last part of the dissertation. A specific database of losses of precast RC buildings damaged by the 2012 Earthquake is created. A statistical analysis is performed, allowing deriving several consequence functions. The outcomes presented may be implemented in probabilistic seismic risk assessments to forecast the losses at the large scale. Furthermore, these may be adopted to establish retrofit policies to prevent and reduce the consequences of future earthquakes in industrial areas.

Electrospinning of polymeric composites with GRMs for different industrial applications

Electrospinning is the most common and industrially scalable technique for the production of polymeric nanofibers. Currently, nanocomposites are drawing much interest for their excellent properties in terms of flexibility, electrical conductivity and high surface area, which enhances the interaction with the surrounding environment. The objective of this thesis was the optimization of different electrospinning setups for the production of nanostructured polymeric composites using graphene-related materials as nanofillers. Such composites were obtained using different polymers as matrix (polyamide 6, polyinylidene fluoride and polylactic acid) that were selected and combined with the appropriate reinforcements based on their properties and their interest for specific applications. Moreover, this study highlighted the possibility to tune the morphology and size of the produced nanofibers by the addition of appropriate nanofillers even in low amounts. The addition of only 0.5% of GO allowed the production of smooth nanofibers with diameters up to 75% thinner (in the case of PLA) than the ones obtained from the pristine polymer. PVdF was charged with GO to produce triboelectric materials that can be exploited in a wearable nanogenerator for the conversion of human motion energy in electrical energy. The addition of GO improved the open-circuit voltage and power-output of a generator prototype by 3.5 times. Electrospun PA6 membranes were coated with rGO using a simple two-step technique to produce conductive textiles for wearable electronic applications. The sheet resistance of the produced materials was measured in approximately 500 Ω/sq and their resistance to washing and bending was successfully tested. These materials could be exploited as strain sensors or heating elements in smart textiles. PLA was co-electrospun with GO and cellulose nanofibers to produce high-surface area and porosity mats that could be exploited for the production of functionalized highly selective adsorption membranes with low pressure drops.