Report of the Tariff Commission.

v. 1. The iron and steel trades. -- v. 2. The textile trades: pt. 1. The cotton industry. pt. 2. Evidence on the woollen industry. pt. 3. Evidence on the hosiery industry. pt. 4. Evidence on the lace industry. pt. 5. Evidence on the carpet industry. pt. 6. Evidence on the silk industry. pt. 7. Evidence on the flax, hemp, and jute industries. 2 v. -- v. 3. Report of the Agricultural Committee. -- v. 4. The engineering industries. -- v. 5. The pottery industries. v. 6. The glass industry. v. 7. Sugar and confectionery.

Standards for teacher education in agriculture : criteria for program evaluation /

"... produced through a joint effort of the Department of Adult, Vocational and Technical Information, Illinois State Board of Education and the Department of Vocational and Technical Information, University of Illinois, Urbana."

Ausführliche Beschreibung des Hanffs und Flachs und der daraus verfertigten Manufacturen, sonderlich des Zwirns, der Leinwand und Spitzen ...

Mode of access: Internet.

Hearings before the Committee on Finance, United States Senate, Sixty-seventh Congress, first session, on the proposed Tariff act of 1921 (H. R. 7456) ... 1922.

Hearings held: July 25-Aug. 10, 1921. (Pt.1)

Beaumaris Castle, Anglesey, Wales,

On cover: Ancient monuments & historic buildings. H.M. Office of Works. Beaumaris Castle, Anglesey. Official guide ...

Genetic individualization of Cannabis sativa by a short tandem repeat multiplex system

Cannabis sativa is the most frequently used of all illicit drugs in the United States. Cannabis has been used throughout history for its stems in the production of hemp fiber, for its seed for oil and food, and for its buds and leaves as a psychoactive drug. Short tandem repeats (STRs), were chosen as molecular markers because of their distinct advantages over other genetic methods. STRs are co-dominant, can be standardized such that reproducibility between laboratories can be easily achieved, have a high discrimination power and can be multiplexed. ^ In this study, six STR markers previously described for Cannabis were multiplexed into one reaction. The multiplex reaction was able to individualize 98 Cannabis samples (14 hemp and 84 marijuana, authenticated as originating from 33 of the 50 United States) and detect 29 alleles averaging 4.8 alleles per loci. The data did not relate the samples from the same state to each other. This is the first study to report a single reaction six-plex and apply it to the analysis of almost 100 Cannabis samples of known geographic collection site. ^

The Philippines in the Paper Global Value Chain

This report uses the Duke CGGC Global Value Chain (GVC) framework to examine the role of the Philippines in the global paper industry and identify opportunities for upgrading. The Philippines’ paper sector is a domestically oriented industry that provides significant indirect employment opportunities for wide swaths of workers as well as indirect exports for sectors such as electronics, food and beverage, and cosmetics. However, the country’s overall participation in the paper GVC is limited, with raw material constraints hindering export development. Abaca pulp production, a niche product category that uses the Manila hemp plant to generate specialized outputs such as tea bags and bank notes, is the country’s most dependable export, but even with the export value of abaca pulp approaching an all-time high in 2014, the overall paper industry only generated US$127 million in export revenue, 54th among 193 countries in the world.

Pollen analysis of sediment profile WO1 from Wollingster See

A palynological study of a 15 m sediment core from the centre of Lake Wollingst (water depth 14,5 m) is presented. The pollen record shows 3 lateglacial thermomers, called Meiendorf, Bölling, Alleröd and the early holocene Friesland-Thermomer. The succession of forest vegetation taking place on the lake surroundings during the Holocene was typical for older moraine soils which are poor in nutrients: forest vegetation started with birch and pine, followed by hazel, oak and elm in the Boreal and by alder, lime and ash-tree in the Atlantic. Beech and hornbeam reached the area during Subboreal. However, due to the poor soils they spread out only after the Iron Age. With the deforestation during the medieval time the lake lost its character of a primeval forest lake. Lake Wollingst was oligotrophic since its origin at the end of the Pleniglacial. After medieval forest-clearing the lake has changed its quality of water particularly in connection with hemp- and flax-rotting. The modem sediments in this profile are completely disturbed. They contain reworked material, a lot of blue-green algae and remains of Bosmina longirostris indicating eutrophic conditions.

Overview on bio-based building material made with plant aggregate

Global warming, energy savings, and life cycle analysis issues are factors that have contributed to the rapid expansion of plant-based materials for buildings, which can be qualified as environmental-friendly, sustainable and efficient multifunctional materials. This review presents an overview on the several possibilities developed worldwide about the use of plant aggregate to design bio-based building materials. The use of crushed vegetal aggregates such as hemp (shiv), flax, coconut shells and other plants associated to mineral binder represents the most popular solution adopted in the beginning of this revolution in building materials. Vegetal aggregates are generally highly porous with a low apparent density and a complex architecture marked by a multi-scale porosity. These geometrical characteristics result in a high capacity to absorb sounds and have hygro-thermal transfer ability. This is one of the essential characteristics which differ of vegetal concrete compared to the tradition mineral-based concretes. In addition, the high flexibility of the aggregates leads to a non-fragile elasto-plastic behavior and a high deformability under stress, lack of fracturing and marked ductility with absorbance of the strains ever after having reached the maximum mechanical strength. Due to the sensitivity to moisture, the assessment of the durability of vegetal concrete constitutes one of the next scientific challenging of bio-based building materials.

Techno-Economic and Life Cycle Assessment for the Production of Green Composites

Botanically, green composites belong to an economically important seed plant family that includes maize, wheat, rice, and sorghum known as Saccharum offi cinarum. There are so many natural fibers available in the environment such as rice husk, hemp fibers, flax fibers, bamboo fibers, coconut fiber, coconut coir, grawia optiva and many others also. Life Cycle Assessment (LCA) is a process to estimate the environmental feature and potential impacts related to a product, by organizing a directory of pertinent inputs and outputs of a product system, assessing the potential environmental impacts related with the said inputs and outputs, explaining the results of the inventory analysis and impact evaluation phases in connection to the objectives of the study. Particularly Bagasse, an agricultural residue not only becomes a problem from the environmental point of view, but also affects the profitability of the sugarcane industries. This chapter discusses the properties, processing methods and various other aspects including economic and environmental aspects related to green composites.

Delivering Regional Extension in Qld Farming Systems - Central Queensland

The CQ Cotton Regional Extension project has been a key to the delivery of emerging, cutting edge research information and knowledge to the Central Queensland cotton industry. The direct relevance of southern research to cotton production under the conditions experienced in CQ always has been an issue which could be addressed through regional assessment and adaptation. The project links the national research to the region through development and extension, with a strong focus on the major industry production issues including but not limited to disease, Integrated Pest Management (IPM), soils, nutrition and integrated weed management. Susan Mass has supported the implementation of national industry-wide programs particularly the industry Best Management Practices program (myBMP). This project has successfully transitioned to a focus on delivering national outcomes in target lead areas as part of National Development and Delivery Team established by Cotton CRC, CRDC and Cotton Australia, while maintaining a regional extension presence for Central Queensland cotton & grain farming systems. Susan Mass has very effectively merged and integrated strong regional extension support to cotton growers in Central Queensland with delivery of industry extension priorities across the entire industry in the Development and Delivery Team model. Susan is the target lead for disease and farm hygiene. Recognising the challenges of having regionally relevant research in Central Queensland, this project has facilitated locally based research including boll rot, Bt cotton resistance management, and mealybug biology through strong collaborations. This collaborative approach has included linkage to Department of Environment and Resource Managmeent (DERM) groups and myBMP programs resulting in a high uptake in CQ.

Isolation and recognition Saprolegnia species from fungal infected eggs of the rainbow trout in Mazandaran province farms

Fungal infection in the eggs of freshwater fish is well known as a problematic disease. That isolation and recognition Saprolegnia fungi from fungal infected eggs of the rainbow trout in Mazandaran province was the aim of this research. For this purpose fungal infected eggs were examined from six fish farm in the fall and winter 2005-2006. The eggs with fungi were inoculated on SDA, CMA, GPagar and hemp seed and sesame seed cultures in sterile tap water at room temperature (18-24°C). In this study recognized three genera and six species Saprolegniaceae members, based on morphological characteristics which contain: Saprolegnia, Achlya, Brevilegnia. Four species were identified in the genus Saprolegnia; S.mixta, S.parasitica, S.moniliphera, S.lapponica and one species was identified in the genus Achlya; A.oblongata. S.parasitica was isolated from almost all the farms. In addition, another nine genera and species were identified; Penicillium, Aspergillus, Paeciliomyces, Acremonium, Fusarium oxysporum, F.solani , Alternaria, Helminthosporium, Mucor.

Greffage d’un film mince de nano-TiO2 sur les fibres naturelles cellulosiques pour le renforcement de biocomposites polymériques

Abstract : Natural materials have received a full attention in many applications because they are degradable and derived directly from earth. In addition to these benefits, natural materials can be obtained from renewable resources such as plants (i.e. cellulosic fibers like flax, hemp, jute, and etc). Being cheap and light in weight, the cellulosic natural fiber is a good candidate for reinforcing bio-based polymer composites. However, the hydrophilic nature -resulted from the presence of hydroxyl groups in the structure of these fibers- restricts the application of these fibers in the polymeric matrices. This is because of weak interfacial adhesion, and difficulties in mixing due to poor wettability of the fibers within the matrices. Many attempts have been done to modify surface properties of natural fibers including physical, chemical, and physico-chemical treatments but on the one hand, these treatments are unable to cure the intrinsic defects of the surface of the fibers and on the other hand they cannot improve moisture, and alkali resistance of the fibers. However, the creation of a thin film on the fibers would achieve the mentioned objectives. This study aims firstly to functionalize the flax fibers by using selective oxidation of hydroxyl groups existed in cellulose structure to pave the way for better adhesion of subsequent amphiphilic TiO[subscript 2] thin films created by Sol-Gel technique. This method is capable of creating a very thin layer of metallic oxide on a substrate. In the next step, the effect of oxidation on the interfacial adhesion between the TiO[subscript 2] film and the fiber and thus on the physical and mechanical properties of the fiber was characterized. Eventually, the TiO[subscript 2] grafted fibers with and without oxidation were used to reinforce poly lactic acid (PLA). Tensile, impact, and short beam shear tests were performed to characterize the mechanical properties while Thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic mechanical analysis (DMA), and moisture absorption were used to show the physical properties of the composites. Results showed a significant increase in physical and mechanical properties of flax fibers when the fibers were oxidized prior to TiO[subscript 2] grafting. Moreover, the TiO[subscript 2] grafted oxidized fiber caused significant changes when they were used as reinforcements in PLA. A higher interfacial strength and less amount of water absorption were obtained in comparison with the reference samples.

Winter sowing for more reliable boll filling in Central Queensland

The Central Highlands region has a unique climate that presents both challenges and novel farming systems opportunities for cotton production. We have been re-examining the Emerald climate in a bid to identify opportunities that might enable the production of more consistent cotton yields and quality in what can be a highly variable climate. A detailed climatic analysis identified that spring and early summer is the most optimal period for boll growth and maturation. However, to unlock this potential requires unseasonal winter sowing that is 4 to 6 weeks earlier than the traditional mid-September sowing. Our experiments have sought answers to two questions: i) how much earlier can cotton be sown for reliable crop establishment and high yield; ii) can degradable plastic film mulches minimise the impact of potentially cold temperatures on crop establishment and early vigour. Initial data suggests August sowing offers the potential to grow a high yield at a time of year with reduced risk of cloud and high night temperatures during boll growth. For the past two seasons late winter sowing (with and without film) has resulted in a compact plant with high retention that physiologically matures by the beginning of January. Even with the spectre of replanting cotton in some seasons due to frost in August, early sowing would appear to offer the opportunity for more efficient crop input usage, simplified agronomic management and new crop rotation options during late summer and autumn. This talk will present an overview of results to date.

What influences fungal communities in cotton soils

Soilborne diseases such as Fusarium wilt, Black root rot and Verticillium wilt have significant impact on cotton production. Fungi are an important component of soil biota with capacity to affect pathogen inoculum levels and their disease causing potential. Very little is known about the soil fungal community structure and management effects in Australian cotton soils. We analysed surface soils from ongoing field experiments monitoring cotton performance and disease incidence in three cotton growing regions, collected prior to 2013 planting, for the genetic diversity and abundance as influenced by soil type, environment and management practices and link it with disease incidence and suppression. Results from the 28S LSU rRNA sequencing based analysis indicated a total of 370 fungal genera in all the cotton soils and the top 25 genera in abundance accounted for the major portion of total fungal community. There were significant differences in the composition and genetic diversity of soil fungi between the different field sites from the three cotton growing regions. Results for diversity indices showed significantly greater diversity in the long-term crop rotation experiment at Narrabri (F6E) and experiments at Cowan and Goondiwindi compared to the Biofumigation and D1 field experiments at ACRI, Narrabri. Diversity was lowest in the soils under brassica crop rotation in Biofumigation experiment. Overall, the diversity and abundance of soil fungal community varied significantly in the three cotton growing regions indicating soil type and environmental effects. These results suggest that changes in soil fungal community may play a notable role in soilborne disease incidence in cotton.