The LRL advanced reactors studies program a review /

"Issued April 3, 1962"

Arf6-independent GPI-anchored protein-enriched early endosomal compartments fuse with sorting endosomes via a Rab5/phosphatidylinositol-3 '-kinase-dependent machinery

In the process of internalization of molecules from the extracellular milieu, a cell uses multiple endocytic pathways, consequently generating different endocytic vesicles. These primary endocytic vesicles are targeted to specific destinations inside the cell. Here, we show that GPI-anchored proteins are internalized by an Arf6-independent mechanism into GPI-anchored protein-enriched early endosomal compartments (GEECs). Internalized GPI-anchored proteins and the fluid phase are first visualized in GEECs that are acidic, primary endocytic structures, negative for early endosomal markers, Rab4, Rab5, and early endosome antigen (EEA)1. They subsequently acquire Rab5 and EEA1 before homotypic fusion with other GEECs, and heterotypic fusion with endosomes containing cargo from the clathrin-dependent endocytic pathway. Although, the formation of GEECs is unaffected by inhibition of Rab5 GTPase and phosphatidylinositol-3'-kinase (PI3K) activity, their fusion with sorting endosomes is dependent on both activities. Overexpression of Rab5 reverts PI3K inhibition of fusion, providing evidence that Rab5 effectors play important roles in heterotypic fusion between the dynamin-independent GEECs and clathrin- and dynamin-dependent sorting endosomes.

Scramjet lift, thrust and pitching-moment characteristics measured in a shock tunnel

Lift, pitching moment, and thrust/drag on a supersonic combustion ramjet were measured in the T4 free-piston shock tunnel using a three-component stress-wave force balance. The scramjet model was 0.567 m long and weighed approximately 6 kg. Combustion occurred at a nozzle-supply enthalpy of 3.3 MJ/kg and nozzle-supply pressure of 32 MPa at Mach 6.6 for equivalence ratios up to 1.4. The force coefficients varied approximately linearly with equivalence ratio. The location of the center of pressure changed by 10% of the chord of the model over the range of equivalence ratios tested. Lift and pitching-moment coefficients remained constant when the nozzle-supply enthalpy was increased to 4.9 MJ/kg at an equivalence ratio of 0.8, but the thrust coefficient decreased rapidly. When the nozzle-supply pressure was reduced at a nozzle-supply enthalpy of 3.3 MJ/kg and an equivalence ratio of 0.8, the combustion-generated increment of lift and thrust was maintained at 26 MPa, but disappeared at 16 MPa. Measured lift and thrust forces agreed well with calculations made using a simplified force prediction model, but the measured pitching moment substantially exceeded predictions. Choking occurred at nozzle-supply enthalpies of less than 3.0 MJ/kg with an equivalence ratio of 0.8. The tests failed to yield a positive thrust because of the skin-friction drag that accounted for up to 50% of the fuel-off drag.

Teoría y práctica del neobarroco en Severo Sarduy

This dissertation analyzes the theory and practice of the Cuban postmodern writer Severo Sarduy (1937–1993) from his early adult years in Cuba to his exile period in Paris, France, where he lived until his death. By studying his narrative through the light of his theoretical essays, this paper demonstrates that the author created his own type of reading model—from and for Sarduy. His literary work is influenced by three major elements: (post)structuralism, psychoanalysis, and Buddhism, which combined form what Sarduy himself called the Neobarroque style. The Sarduyan writing is a transgressive exercise expressed through his concept of simulación. This style breaks with the traditional art concept of mimesis (the representation of reality in the western world), and therefore with the correspondence between the signifier and the signified. Sarduy does not intend to represent reality but to go beyond it, achieving by his technique of signifying exhaustion to represent absence itself. The Neobarroque of Severo Sarduy is an aesthetic of the empty signifier based on the reckless expenditure, and ultimately exhaustion, of the artifices of language that precipitates in a signifier chain towards the infinite. His language does not transmit a message but it signifies itself, that is, a means without an end. Paradoxically, this signifier chain produces an excess of metaphors beyond the material limits of language and its support, the page. The space beyond language is the hipertelic technique inherited by Sarduy from his literary master, José Lezama Lima. This is also the empty space of no signification or nonsense in which occurs the depersonalization of the speaking subject; in Buddhist terminology this becomes the dissolution of the ego. The Sarduyan language is determined by a Lacanian psychoanalytic erotic drive (pulsion) known as the Barroquean desire, a death drive which directly relates to the exile condition of the author. But the genesis of this desire lies in a primordial desire of encounter with his origin: mother, maternal language, paradise, God. That is the reason why Sarduy not only poses an aesthetic question but also an ontological one. This other dimension of the Sarduyan writing is based on a liberating drive that permeates all his work—an ontological liberation expressed through language. The empty space created in the text provides the subject with the possibility of fusion with the all. Ultimately, Sarduy strives for a language that goes beyond the symbolic limits towards a place of constant dissolution, evanesce, and death-horror vacui. This corroborates the Sarduyan statement: “la simulación enuncia el vacío y la muerte.”

Avaliação da soldagem GMAW mecanizada e automatizada para união de dutos utilizando fontes convencional e com controle de curto- circuito

Welding is one of the most employed process for joining steel pipes. Although, manual welding is still the most used one, mechanized version and even automatized one have increased its demand. Thus, this work deals with girth welding of API 5L X65 pipes with 8” of nominal diameter and 8.0 mm thickness, beveled with V-30º narrow gap. Torch is moved by a bug carrier (mechanized welding) and further the parameters are controlled as a function of angular position (automatized welding). Welding parameters are presented for filling the joint with two-passes (root and filling/capping passes). Parameters for the root pass were extracted from previous author´s work with weldments carried out in plates, but validated in this work for pipe welding. GMAW processes were assessed with short-circuit metal transfer in both conventional and derivative modes using different technologies (RMD, STT and CMT). After the parameter determination, mechanical testing was performed for welding qualification (uniaxial tension, face and root bending, nick break, Charpy V-notch impact, microhardness and macrograph). The initially obtained results for RMD and CMT were acceptable for all testing and, in a second moment, also for the STT. However, weld beads carried out by using the conventional process failed and revealed the existence of lack of fusion, which required further parametrization. Thus, a Parameter-Variation System for Girth Welding (SVP) was designed and built to allow varying the welding parameters as a function of angular position by using an inclinometer. The parameters were set for each of the three angular positions (flat, vertical downhill and overhead). By using such equipment and approach, the conventional process with parameter variation allowed reducing the welding time for joint accomplishment of the order of 38% for the root pass and 30% for the filling/capping pass.

Das raízes

O objetivo deste projeto artístico foi desenvolver um conhecimento mais aprofundado relacionado com a execução e interpretação de técnicas de percussão tradicionais aliadas a técnicas contemporâneas. De entre as várias técnicas tradicionais de percussão optei por desenvolver as da percussão Africana (Guiné e Burkina Faso, e mais tarde Nigéria) e as da percussão Cubana. Criei assim um projeto artístico de fusão intitulado Das Raízes, no qual ao longo dos dois anos do curso de mestrado estive em contacto com a música Africana e Cubana aliada a técnicas contemporâneas e composições originais (minhas e de outros compositores). Para cada obra explorei primeiro as técnicas tradicionais e em seguida adaptei-as à percussão contemporânea, num processo onde as suas raízes africanas, cubanas ou até afro- cubanas são evidentes. Neste projeto salienta-se o papel preponderante das mãos. No século XXI o uso da baqueta predomina como a técnica mais forte para dominar os instrumentos nos conservatórios e nas escolas superiores de música. Após ter adquirido esta técnica resolvi aprofundar as técnicas tradicionais onde predominam o uso não só da baqueta mas também da mão, um mundo antigo na sua existência, mas novo para mim. Espero poder transportar o ouvinte para um mundo em que cor, movimento e som, antiguidade e contemporaneidade estão em constante vibração.

Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini

The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II) e 1:3(III) metal-citric acid were synthesized using the Pechini method. We used techniques of TG / DTG and ATD to monitor the degradation process of organic matter to the formation of the oxide. By thermogravimetric analysis and applying the dynamic method proposed by Coats-Redfern, it was possible to study the reactions of thermal decomposition in order to propose the possible mechanism by which the reaction takes place, as well as the determination of kinetic parameters as activation energy, Ea, pre-exponential factor and parameters of activation. It was observed that both variables exert a significant influence on the formation of complex polymeric precursor. The model that best fitted the experimental data in the dynamic mode was R3, which consists of nuclear growth, which formed the nuclei grow to a continuous reaction interface, it proposes a spherical symmetry (order 2 / 3). The values of enthalpy of activation of the system showed that the reaction in the state of transition is exothermic. The variables of composition, together with the variable temperature of calcination were studied by different techniques such as XRD, IV and SEM. Also a study was conducted microstructure by the Rietveld method, the calculation routine was developed to run the package program FullProf Suite, and analyzed by pseudo-Voigt function. It was found that the molar ratio of variable metal-citric acid in the system CeO2-NiO (I), (II), (III) has strong influence on the microstructural properties, size of crystallites and microstrain network, and can be used to control these properties

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Comb-like acrylic-based polymer latexes containing nano-sized crystalline or liquid crystalline domains

306 p.

Simplified Chinese lacquer techniques and Nanban style decoration on Luso-Asian objects from the late sixteenth or early seventeenth centuries

The meeting of multiple cultures and their mutual influence during the Portuguese expansion in Asia led to the emergence of different types of fusion styles in objects commissioned by the settlers, merchants, and religious orders present in Portuguese India. The east-Asian lacquer coatings of modestly sized wooden objects of various types dating from the sixteenth and early seventeenth centuries have been analyzed as part of the research for a doctoral thesis that aims to establish their cultural and geographical attribution within the context of the Getty Conservation Institute’s lacquer research project. Among the objects were three seventeenthcentury lacquered trays from Portuguese museums and private collections that had previously been classified as Japanese Nanban, Chinese or Ryukyuan lacquers or even as Indo-Portuguese artifacts. The materials and techniques that were identified show close similarities with Chinese techniques mentioned in historic accounts — the only existing Ming Chinese Treatise on lacquering Xiushi lu and the eighteenth-century memoirs of the Jesuit priest d’Incarville. These nearly 400-year-old artifacts are among the first lacquered objects commissioned by Europeans and probably the first of Chinese origin. Their detailed technical study contributes to international lacquer research and complements existing knowledge and perceptions of the lacquering processes that were applied in response to an early European demand for exotic items.

Impiego dell’ecografia ad alta risoluzione nella diagnosi di anomalie cerebrali fetali difficili. Focus sul complesso anteriore.

In questo lavoro di tesi vengono prese in esame le principali anomalie cerebrali fetali a carico del complesso anteriore, formato dal cavo del setto pellucido e dai corni frontali dei ventricoli laterali. Si è poi concentrata l’attenzione sull’oloprosencefalia e sull’obliterazione del cavo del setto pellucido, analizzando i casi che sono stati riferiti c/o la U.O. di Ostetricia e Medicina dell’Età Prenatale del Policlinico di S. Orsola – IRCCS. L’oloprosencefalia racchiude in sé uno spettro di anomalie cerebrali caratterizzate da un difetto di formazione della linea mediana con forme variabili di fusione degli emisferi cerebrali. Le forme alobari mostrano una distorsione della anatomia cerebrale, con un singolo ventricolo e sono spesso associate ad anomalie extracerebrali e del cariotipo. Nelle forme semilobari e lobari il setto pellucido è generalmente assente nei piani assiali, con corni frontali fusi ed ipoplasici, ma queste caratteristiche possono essere di difficile interpretazione ad un esame di screening. Le anomalie facciali sono invece più sfuggenti. L’obliterazione del cavo del setto consiste in un suo aspetto ecogeno, normalmente disteso da fluido; è ritenuta una variante della norma, ma queste conclusioni sono basate su casistiche limitate. Anche in questo caso abbiamo riportato l’eventuale presenza di anomalie associate ed abbiamo poi rivalutato questi bambini mediante una visita specialistica presso la U.O. di Neuropsichiatria Infantile. Nella nostra esperienza di 16 casi, la neurosonografia è stata in grado di definire la presenza o meno di anomalie cerebrali associate (1 caso di cisti interemisferiche e corpo calloso disgenetico) al pari della risonanza magnetica. Nei casi apparentemente isolati, in circa il 20% tale reperto è stato transitorio nel corso della gravidanza e non sono state riportate anomalie del cariotipo. Tutte le visite di follow up eseguite nel contesto dello studio (risultati parziali di 7/15 bambini) hanno dimostrato uno sviluppo nella norma per l’età del bambino.

Developmental Potential of Bovine Hand-Made Clone Embryos Reconstructed by Aggregation or Fusion with Distinct Cytoplasmic Volumes

Animal cloning has been associated with developmental abnormalities, with the level of heteroplasmy caused by the procedure being one of its potential limiting factors. The aim of this study was to determine the effect of the fusion of hemicytoplasts or aggregation of hemiembryos, varying the final cytoplasmic volume, on development and cell density of embryos produced by hand-made cloning (HMC), parthenogenesis or by in vitro fertilization (IVF). One or two enucleated hemicytoplasts were paired and fused with one skin somatic cell. Activated clone and zona-free parthenote embryos and hemiembryos were in vitro cultured in the well-of-the-well (WOW) system, being allocated to one of six experimental groups, on a per WOW basis: single clone or parthenote hemiembryos (1 x 50%); aggregation of two (2 x 50%), three (3 x 50%), or four (4 x 50%) clone or parthenote hemiembryos; single clone or parthenote embryos (1 x 100%); or aggregation of two clone or parthenote embryos (2 x 100%). Control zona-intact parthenote or IVF embryos were in vitro cultured in four-well dishes. Results indicated that the increase in the number of aggregated structures within each WOW was followed by a linear increase in cleavage, blastocyst rate, and cell density. The increase in cytoplasmic volume, either by fusion or by aggregation, had a positive effect on embryo development, supporting the establishment of pregnancies and the birth of a viable clone calf after transfer to recipients. However, embryo aggregation did not improve development on a hemicytoplast basis, except for the aggregation of two clone embryos.

Near-Barrier Fusion of the (8)B+(58)Ni Proton-Halo System

Fusion cross sections were measured for the exotic proton-halo nucleus (8)B incident on a (58)Ni target at several energies near the Coulomb barrier. This is the first experiment to report on the fusion of a protonhalo nucleus. The resulting excitation function shows a striking enhancement with respect to expectations for normal projectiles. Evidence is presented that the sum of the fusion and breakup yields saturates the total reaction cross section.

Human gait recognition using extraction and fusion of global motion features

This paper proposes a novel computer vision approach that processes video sequences of people walking and then recognises those people by their gait. Human motion carries different information that can be analysed in various ways. The skeleton carries motion information about human joints, and the silhouette carries information about boundary motion of the human body. Moreover, binary and gray-level images contain different information about human movements. This work proposes to recover these different kinds of information to interpret the global motion of the human body based on four different segmented image models, using a fusion model to improve classification. Our proposed method considers the set of the segmented frames of each individual as a distinct class and each frame as an object of this class. The methodology applies background extraction using the Gaussian Mixture Model (GMM), a scale reduction based on the Wavelet Transform (WT) and feature extraction by Principal Component Analysis (PCA). We propose four new schemas for motion information capture: the Silhouette-Gray-Wavelet model (SGW) captures motion based on grey level variations; the Silhouette-Binary-Wavelet model (SBW) captures motion based on binary information; the Silhouette-Edge-Binary model (SEW) captures motion based on edge information and the Silhouette Skeleton Wavelet model (SSW) captures motion based on skeleton movement. The classification rates obtained separately from these four different models are then merged using a new proposed fusion technique. The results suggest excellent performance in terms of recognising people by their gait.

Experimental data and modeling of the thermodynamic properties of bread dough at refrigeration and freezing temperatures

Thermodynamic properties of bread dough (fusion enthalpy, apparent specific heat, initial freezing point and unfreezable water) were measured at temperatures from -40 degrees C to 35 degrees C using differential scanning calorimetry. The initial freezing point was also calculated based on the water activity of dough. The apparent specific heat varied as a function of temperature: specific heat in the freezing region varied from (1.7-23.1) J g(-1) degrees C(-1), and was constant at temperatures above freezing (2.7 J g(-1) degrees C(-1)). Unfreezable water content varied from (0.174-0.182) g/g of total product. Values of heat capacity as a function of temperature were correlated using thermodynamic models. A modification for low-moisture foodstuffs (such as bread dough) was successfully applied to the experimental data. (C) 2010 Elsevier Ltd. All rights reserved.