Handbook for the design of intercultural policies: summary of the original Spanish version

Local governments need minimum common criteria to manage the social dynamics of diversity. This Handbook defends the strategy of interculturality as a public political approach, based on a way to interpret interculturality as a positive resource, as a public cultural and a collective good. It is an approach that promotes the equitative interaction as a way to generate a cohesive common public space. This Handbook provides the reader with the conceptual and practical instruments to help (and inspire) those territories which would like to integrate interculturality as an urban project.It aims to serve as a ground for discussion to jointly work in local administrations and other government levels, fororganizations and institutions, as well as for cultural, political and citizens collectives. Results are presented asan action by the Red de Ciudades Interculturales (RECI), within the Intercultural Cities framework by the Councilof Europe, with the collaboration of Obra Social "La Caixa".

Studies on integrating kinematic design method with mechanical systems simulation techniques

Theultimate goal of any research in the mechanism/kinematic/design area may be called predictive design, ie the optimisation of mechanism proportions in the design stage without requiring extensive life and wear testing. This is an ambitious goal and can be realised through development and refinement of numerical (computational) technology in order to facilitate the design analysis and optimisation of complex mechanisms, mechanical components and systems. As a part of the systematic design methodology this thesis concentrates on kinematic synthesis (kinematic design and analysis) methods in the mechanism synthesis process. The main task of kinematic design is to find all possible solutions in the form of structural parameters to accomplish the desired requirements of motion. Main formulations of kinematic design can be broadly divided to exact synthesis and approximate synthesis formulations. The exact synthesis formulation is based in solving n linear or nonlinear equations in n variables and the solutions for the problem areget by adopting closed form classical or modern algebraic solution methods or using numerical solution methods based on the polynomial continuation or homotopy. The approximate synthesis formulations is based on minimising the approximation error by direct optimisation The main drawbacks of exact synthesis formulationare: (ia) limitations of number of design specifications and (iia) failure in handling design constraints- especially inequality constraints. The main drawbacks of approximate synthesis formulations are: (ib) it is difficult to choose a proper initial linkage and (iib) it is hard to find more than one solution. Recentformulations in solving the approximate synthesis problem adopts polynomial continuation providing several solutions, but it can not handle inequality const-raints. Based on the practical design needs the mixed exact-approximate position synthesis with two exact and an unlimited number of approximate positions has also been developed. The solutions space is presented as a ground pivot map but thepole between the exact positions cannot be selected as a ground pivot. In this thesis the exact synthesis problem of planar mechanism is solved by generating all possible solutions for the optimisation process ¿ including solutions in positive dimensional solution sets - within inequality constraints of structural parameters. Through the literature research it is first shown that the algebraic and numerical solution methods ¿ used in the research area of computational kinematics ¿ are capable of solving non-parametric algebraic systems of n equations inn variables and cannot handle the singularities associated with positive-dimensional solution sets. In this thesis the problem of positive-dimensional solutionsets is solved adopting the main principles from mathematical research area of algebraic geometry in solving parametric ( in the mathematical sense that all parameter values are considered ¿ including the degenerate cases ¿ for which the system is solvable ) algebraic systems of n equations and at least n+1 variables.Adopting the developed solution method in solving the dyadic equations in direct polynomial form in two- to three-precision-points it has been algebraically proved and numerically demonstrated that the map of the ground pivots is ambiguousand that the singularities associated with positive-dimensional solution sets can be solved. The positive-dimensional solution sets associated with the poles might contain physically meaningful solutions in the form of optimal defectfree mechanisms. Traditionally the mechanism optimisation of hydraulically driven boommechanisms is done at early state of the design process. This will result in optimal component design rather than optimal system level design. Modern mechanismoptimisation at system level demands integration of kinematic design methods with mechanical system simulation techniques. In this thesis a new kinematic design method for hydraulically driven boom mechanism is developed and integrated in mechanical system simulation techniques. The developed kinematic design method is based on the combinations of two-precision-point formulation and on optimisation ( with mathematical programming techniques or adopting optimisation methods based on probability and statistics ) of substructures using calculated criteria from the system level response of multidegree-of-freedom mechanisms. Eg. by adopting the mixed exact-approximate position synthesis in direct optimisation (using mathematical programming techniques) with two exact positions and an unlimitednumber of approximate positions the drawbacks of (ia)-(iib) has been cancelled.The design principles of the developed method are based on the design-tree -approach of the mechanical systems and the design method ¿ in principle ¿ is capable of capturing the interrelationship between kinematic and dynamic synthesis simultaneously when the developed kinematic design method is integrated with the mechanical system simulation techniques.

Permanent magnet synchronous motor for industrial inverter applications - analysis and design

During the latest few years the need for new motor types has grown, since both high efficiency and an accurate dynamic performance are demanded in industrial applications. For this reason, new effective control systems such as direct torque control (DTC) have been developed. Permanent magnet synchronous motors (PMSM) are well suitable for new adjustable speed AC inverter drives, because their efficiency and power factor are not depending on the pole pair number and speed to the same extent as it is the case in induction motors. Therefore, an induction motor (IM) with a mechanical gearbox can often be replaced with a direct PM motor drive. Space as well as costs will be saved, because the efficiency increases and the cost of maintenance decreases as well. This thesis deals with design criterion, analytical calculation and analysis of the permanent magnet synchronous motor for both sinusoidal air-gap flux density and rectangular air-gapflux density. It is examined how the air-gap flux, flux densities, inductances and torque can be estimated analytically for salient pole and non-salient pole motors. It has been sought by means of analytical calculations for the ultimate construction for machines rotating at relative low 300 rpm to 600 rpm speeds, which are suitable speeds e.g. in Pulp&Paper industry. The calculations are verified by using Finite Element calculations and by measuring of prototype motor. The prototype motor is a 45 kW, 600 rpm PMSM with buried V-magnets, which is a very appropriate construction for high torque motors with a high performance. With the purposebuilt prototype machine it is possible not only to verify the analytical calculations but also to show whether the 600 rpm PMSM can replace the 1500 rpm IM with a gear. It can also be tested if the outer dimensions of the PMSM may be the same as for the IM and if the PMSM in this case can produce a 2.5 fold torque, in consequence of which it may be possible to achieve the same power. The thesis also considers the question how to design a permanent magnet synchronous motor for relatively low speed applications that require a high motor torqueand efficiency as well as bearable costs of permanent magnet materials. It is shown how a selection of different parameters affects the motor properties. Key words: Permanent magnet synchronous motor, PMSM, surface magnets, buried magnets

Wiki-supported collaborative learning in primary education. How a dialogic space is created for thinking together

This paper explores how wikis may be used to support primary education students’ collaborative interaction and how such an interaction process can be characterised. The overall aim of this study is to analyse the collaborative processes of students working together in a wiki environment, in order to see how primary students can actively create a shared context for learning in the wiki. Educational literature has already reported that wikis may support collaborative knowledge-construction processes, but in our study we claim that a dialogic perspective is needed to accomplish this. Students must develop an intersubjective orientation towards each others’ perspectives, to co-construct knowledge about a topic. For this purpose, our project utilised a ‘Thinking Together’ approach to help students develop an intersubjective orientation towards one another and to support the creation of a ‘dialogic space’ to co-construct new understanding in a wiki science project. The students’ asynchronous interaction process in a primary classroom -- which led to the creation of a science text in the wiki -- was analysed and characterised, using a dialogic approach to the study of CSCL practices. Our results illustrate how the Thinking Together approach became embedded within the wiki environment and in the students’ collaborative processes. We argue that a dialogic approach for examining interaction can be used to help design more effective pedagogic approaches related to the use of wikis in education and to equip learners with the competences they need to participate in the global knowledge-construction era.

Inclusion and empowerment in public art and urban design

To involve citizens in developing the processes of city making is an objective that occupies part of the agenda of political parties in the context of the necessary renewal in representative democracy. This paper aims to provide some answers to the following questions: Is it possible to overcome the participatory processes based exclusively on the consultation? Is it possible to"train" residents to take an active role in decision-making? How can we manage, proactively, the relationship between public actors, technicians and politicians, in a participatory process? We analyse the process development for creating the Wall of Remembrance in the Barcelona neighbourhood of Baró de Viver, a work of public art, created and produced by its neighbours, in the context of a long participatory process focused on changing the image of the neighbourhood and the improvement of public space. This result and this process have been possible in a given context of cooperation among neighbours, local government and the research team (CR-Polis, Art, City, Society at the University of Barcelona). The development of a creative process of citizen participation between 2004 and 2011 made possible the direct management of decision making by the residents on the field of the design of public space in the neighbourhood. However, the material results of the process does not overshadow the great achievement of the project: the inclusion of a neighbourhood in taking informed decisions because of their empowerment in public space design and management of their remembrances.

Hope as a Resource for Career Exploration : Examining Incremental and Cross-Lagged Effects

Hope is believed to be beneficial for vocational pursuits, but the question of how and why hope is related to pivotal career development variables remains largely unaddressed. In a series of three studies,we investigated the relationship between hope and career exploration. Study 1 examined at-risk adolescents (N = 228) in Switzerland and showed that hope explains variance in career exploration beyond the significant effects of generalized self-efficacy beliefs and perceived social support. Study 2 found the same result among a group (N=223) of first-year students at a Swiss university with a measure of state hope. Study 3 applied a one-year cross-lagged design with a diverse group of students (N = 266) at a German university to investigate the mutual effects of dispositional hope and career exploration over time. Although both variables were found to be related within and over time, we could not confirm lagged effects in either direction. The results suggest that hope is significantly correlated with career exploration because both are related to personality and social-contextual variables.

Computational studies for the design of process equipment with complex geometries

This study combines several projects related to the flows in vessels with complex shapes representing different chemical apparata. Three major cases were studied. The first one is a two-phase plate reactor with a complex structure of intersecting micro channels engraved on one plate which is covered by another plain plate. The second case is a tubular microreactor, consisting of two subcases. The first subcase is a multi-channel two-component commercial micromixer (slit interdigital) used to mix two liquid reagents before they enter the reactor. The second subcase is a micro-tube, where the distribution of the heat generated by the reaction was studied. The third case is a conventionally packed column. However, flow, reactions or mass transfer were not modeled. Instead, the research focused on how to describe mathematically the realistic geometry of the column packing, which is rather random and can not be created using conventional computeraided design or engineering (CAD/CAE) methods. Several modeling approaches were used to describe the performance of the processes in the considered vessels. Computational fluid dynamics (CFD) was used to describe the details of the flow in the plate microreactor and micromixer. A space-averaged mass transfer model based on Fick’s law was used to describe the exchange of the species through the gas-liquid interface in the microreactor. This model utilized data, namely the values of the interfacial area, obtained by the corresponding CFD model. A common heat transfer model was used to find the heat distribution in the micro-tube. To generate the column packing, an additional multibody dynamic model was implemented. Auxiliary simulation was carried out to determine the position and orientation of every packing element in the column. This data was then exported into a CAD system to generate desirable geometry, which could further be used for CFD simulations. The results demonstrated that the CFD model of the microreactor could predict the flow pattern well enough and agreed with experiments. The mass transfer model allowed to estimate the mass transfer coefficient. Modeling for the second case showed that the flow in the micromixer and the heat transfer in the tube could be excluded from the larger model which describes the chemical kinetics in the reactor. Results of the third case demonstrated that the auxiliary simulation could successfully generate complex random packing not only for the column but also for other similar cases.

Agent-based management systems for many-core platforms : rigorous design and efficient implementation

Due to various advantages such as flexibility, scalability and updatability, software intensive systems are increasingly embedded in everyday life. The constantly growing number of functions executed by these systems requires a high level of performance from the underlying platform. The main approach to incrementing performance has been the increase of operating frequency of a chip. However, this has led to the problem of power dissipation, which has shifted the focus of research to parallel and distributed computing. Parallel many-core platforms can provide the required level of computational power along with low power consumption. On the one hand, this enables parallel execution of highly intensive applications. With their computational power, these platforms are likely to be used in various application domains: from home use electronics (e.g., video processing) to complex critical control systems. On the other hand, the utilization of the resources has to be efficient in terms of performance and power consumption. However, the high level of on-chip integration results in the increase of the probability of various faults and creation of hotspots leading to thermal problems. Additionally, radiation, which is frequent in space but becomes an issue also at the ground level, can cause transient faults. This can eventually induce a faulty execution of applications. Therefore, it is crucial to develop methods that enable efficient as well as resilient execution of applications. The main objective of the thesis is to propose an approach to design agentbased systems for many-core platforms in a rigorous manner. When designing such a system, we explore and integrate various dynamic reconfiguration mechanisms into agents functionality. The use of these mechanisms enhances resilience of the underlying platform whilst maintaining performance at an acceptable level. The design of the system proceeds according to a formal refinement approach which allows us to ensure correct behaviour of the system with respect to postulated properties. To enable analysis of the proposed system in terms of area overhead as well as performance, we explore an approach, where the developed rigorous models are transformed into a high-level implementation language. Specifically, we investigate methods for deriving fault-free implementations from these models into, e.g., a hardware description language, namely VHDL.

Creating better customer experiences: Service Design effects on customer experience

Pro gradu –tutkielman tavoitteena oli tutkia, kuinka palvelumuotoilua voidaan käyttää parempien asiakaskokemusten luomisessa. Tutkimuksen teoreettisessa osuudessa keskityttiin tutkimaan palvelumuotoilun ja asiakaskokemuksen käsitteitä. Tutkielman empiirinen osuus tehtiin laadullisena tutkimuksena, jossa vertailtiin asiakaskokemuksia kahdessa Espoon kaupungin yhteispalvelupisteessä: Leppävaarassa sijaitseva yhteispalvelupiste oli hiljattain suunniteltu uudelleen käyttäen palvelumuotoilun periaatteita; Matinkylän palvelupiste oli alkuperäisessä muodossaan tutkimuksen aikana. Tutkimuksen yhtenä tavoitteena oli myös selvittää, oliko palvelumuotoilun menetelmin tehty muotoiluprojekti Leppävaaran yhteispalvelupisteessä onnistunut, kun sitä arvioitiin asiakaskokemuksen näkökulmasta. Tutkielman aineisto kerättiin suoran havainnoinnin ja haastattelun keinoin. Yhteensä 33 yksittäistä asiakasta havannoitiin ja haastateltiin tutkimusta varten toukokuussa 2015. Vastaajat valikoituivat satunnaisesti havannointipäivien asiakkaista. Heitä havainnoitiin koko asiakaspolun ajan minkä jälkeen heitä haastateltiin. Tutkimuksen tulokset ovat kaksiosaiset. 1) Arvioitaessa asiakkaiden kokemuksia liittyen palvelutilan toimivuuteen ja aineelliseen ympäristöön todettiin, että palvelumuotoilulla saavuttettiin parempi asiakaskokemus, ja täten Leppävaaran muotoiluprojekti oli onnistunut tavoitteissaan. 2) Kun taas tuloksia tarkasteltiin asiakaspalvelutilanteiden näkökulmasta, projekti ei ollut päässyt tavoitteisiin ja palvelumuotoilun menetelmillä ei pystytty parantamaan asiakaskokemuksta. Espoon kaupungin muotoiluprojekti on vielä kesken, tulosten perusteella tutkija ehdotti jatkotoimenpiteenä muun muassa lisäkoulutusta palveluhenkilökunnalle.

Show me your brain! Stories of interdisciplinary knowledge creation in practice. Experiences and observations from Aalto Design Factory, Finland.

This dissertation centres on the themes of knowledge creation, interdisciplinarity and knowledge work. My research approaches interdisciplinary knowledge creation (IKC) as practical situated activity. I argue that by approaching IKC from the practice-based perspective makes it possible to “deconstruct” how knowledge creation actually happens, and demystify its strong intellectual, mentalistic and expertise-based connotations. I have rendered the work of the observed knowledge workers into something ordinary, accessible and routinized. Consequently this has made it possible to grasp the pragmatic challenges as well the concrete drivers of such activity. Thus the effective way of organizing such activities becomes a question of organizing and leading effective everyday practices. To achieve that end, I have conducted ethnographic research of one explicitly interdisciplinary space within higher education, Aalto Design Factory in Helsinki, Finland, where I observed how students from different disciplines collaborated in new product development projects. I argue that IKC is a multi-dimensional construct that intertwines a particular way of doing; a way of experiencing; a way of embodied being; and a way of reflecting on the very doing itself. This places emphasis not only the practices themselves, but also on the way the individual experiences the practices, as this directly affects how the individual practices. My findings suggest that in order to effectively organize and execute knowledge creation activities organizations need to better accept and manage the emergent diversity and complexity inherent in such activities. In order to accomplish this, I highlight the importance of understanding and using a variety of (material) objects, the centrality of mundane everyday practices, the acceptance of contradictions and negotiations well as the role of management that is involved and engaged. To succeed in interdisciplinary knowledge creation is to lead not only by example, but also by being very much present in the very everyday practices that make it happen.

Head Space Solid Phase Micro-Extraction (HS - SPME) of volatile organic compounds produced by Sporidiobolus salmonicolor (CBS 2636)

The aim of the present study was the assessment of volatile organic compounds produced by Sporidiobolus salmonicolor (CBS 2636) using methyl and ethyl ricinoleate, ricinoleic acid and castor oil as precursors. The analysis of the volatile organic compounds was carried out using Head Space Solid Phase Micro-Extraction (HS - SPME). Factorial experimental design was used for investigating extraction conditions, verifying stirring rate (0-400 rpm), temperature (25-60 ºC), extraction time (10-30 minutes), and sample volume (2-3 mL). The identification of volatile organic compounds was carried out by Gas Chromatography with Mass Spectrum Detector (GC/MSD). The conditions that resulted in maximum extraction were: 60 ºC, 10 minutes extraction, no stirring, sample volume of 2.0 mL, and addition of saturated KCl (1:10 v/v). In the bio-production of volatile organic compounds the effect of stirring rate (120-200 rpm), temperature (23-33 ºC), pH (4.0-8.0), precursor concentration (0.02-0.1%), mannitol (0-6%), and asparagine concentration (0-0.2%) was investigated. The bio-production at 28 ºC, 160 rpm, pH 6,0 and with the addition of 0.02% ricinoleic acid to the medium yielded the highest production of VOCs, identified as 1,4-butanediol, 1,2,2-trimethylciclopropilamine, beta-ionone; 2,3-butanodione, pentanal, tetradecane, 2-isononenal, 4-octen-3-one, propanoic acid, and octadecane.

A Business Incubator, Accelerator, or Coworking Space? Case Health Innovation Village at GE

Health Innovation Village at GE is one of the new communities targeted for startup and growth-oriented companies. It has been established at the premises of a multinational conglomerate that will promote networking and growth of startup companies. The concept combines features from traditional business incubators, accelerators, and coworking spaces. This research compares Health Innovation Village to these concepts regarding its goals, target clients, source of income, organization, facilities, management, and success factors. In addition, a new incubator classification model is introduced. On the other hand, Health Innovation Village is examined from its tenants’ perspective and improvements are suggested. The work was implemented as a qualitative case study by interviewing GE staff with connections to Health Innovation Village as well as startup entrepreneurs and employees’ working there. The most evident features of Health Innovation Village correspond to those of business incubators although it is atypical as a non-profit corporate business incubator. Strong network orientation and connections to venture capitalists are common characteristics of these new types of accelerators. The design of the premises conforms to the principles of coworking spaces, but the services provided to the startup companies are considerably more versatile than the services offered by coworking spaces. The advantages of Health Innovation Village are that there are first-class premises and exceptionally good networking possibilities that other types of incubators or accelerators are not able to offer. A conglomerate can also provide multifaceted special knowledge for young firms. In addition, both GE and the startups gained considerable publicity through their cooperation, indeed a characteristic that benefits both parties. Most of the expectations of the entrepreneurs were exceeded. However, communication and the scope of cooperation remain challenges. Micro companies spend their time developing and marketing their products and acquiring financing. Therefore, communication should be as clear as possible and accessible everywhere. The startups would prefer to cooperate significantly more, but few have the time available to assume the responsibility of leadership. The entrepreneurs also expected to have more possibilities for cooperation with GE. Wider collaboration might be accomplished by curation in the same way as it is used in the well-functioning coworking spaces where curators take care of practicalities and promote cooperation. Communication issues could be alleviated if the community had its own Intranet pages where all information could be concentrated. In particular, a common calendar and a room reservation system could be useful. In addition, it could be beneficial to have a section of the Intranet open for both the GE staff and the startups so that those willing to share their knowledge and those having project offers could use it for advertising.

Ethical space in a secondary school: a case study /

Discourse in the provincial education system that includes Aboriginal peoples is a convoluted one-sided affair. This has contributed to the limited academic success for Aboriginal secondary students in the provincial school system. The Office of the Auditor General (2004) announced a 27-28 year gap in Academic success compared to non- Aboriginal students (p. I). Both Aboriginal and non-Aboriginal stakeholders are fiiistrated and confused with the lack of support for long-term solutions to address academic success for Aboriginal students. The boundaries in education that exist between the dominant society of Canada and Aboriginal peoples in education are hindering the development of ethical space in which to negotiate and apply "concrete arguments and concepts" (Ermine, 2000, p. 140) for 'best' solutions across the cultural divide. Recent literature suggests a gap in knowledge to address this cultural divide. This study reveals racism is still prevalent and the problem lies in the fallacy of Euro-Western pedagogical beliefs. There is a need to design ethical space that will assist transformation of cross-relations in education for inclusion of Aboriginal voices and content. I submit that ethical space involves physical and abstract space. This report is a qualitative, exploratory, and single case study of one northern Ontario secondary school attended by First Nations and Metis peoples who comprise 35% of the school population. Twenty-six stakeholders volunteered to participate in six interviews. The volunteers in this study are Aboriginal and non-Aboriginal. Aboriginal peoples are firom two First Nations, and Metis peoples. It is an Aboriginal designed and delivered study that a) describes an Aboriginally-designed research method to gather data across cultural divides in a secondary school, b) reviews Tri-Council Policy Section 6 (TCPS) regarding 'good practices' in ethical research involving Aboriginal peoples, and c) summarizes stakeholder perspectives of the 'best educational environment' for one secondary school.

An exploration of the impact of a mandatory quality assurance program on the staff nurse's commitment to professional development /

This study explored experiences in relation to the impact of the College of Nurses of Ontario's (CNO's) mandatory Quality Assurance (QA) program on registered nurses (RNs) working in a clinical setting of an acute care hospital. A qualitative descriptive research design was used and data collection was done in 2 stages. First, a survey with open-ended questions was given to 45 nurses. Second, 8 respondents from the survey were interviewed using a semistructured format. Data were obtained from 2 groups-diploma-prepared and post diploma-prepared RNs. Findings demonstrated that the CNO's QA program had varying influences on the RNs' learning paths, and these differences appeared to be related to the educational background of the individual. The diploma-prepared nurses reported that their commitment to professional development was influenced by their level of internal motivation, the pressures associated with time, and the need for a strong external motivator, namely the obligation of management to conduct formal performance appraisals. They further reported that the QA program played a part in positively altering their commitment to continuing education. The post-diploma baccalaureate nurses reported that the QA program played a positive role in influencing their ongoing learning, along with their level of internal motivation, the work and health care environment, and the element of professionalism. Several implications for nursing practice, theory, and fiirther research also became evident.

Creating a Space for Self-Transformation: Factors of Success for Adult Literacy Learners with Specific Learning Difficulties

A significant number of adults in adult literacy programs in Ontario have specific learning difficulties. This study sought to examine the holistic factors that contributed to these learners achieving their goals. Through a case study design, the data revealed that a combination of specific learning methods and strategies, along with particular characteristics of the instructor, participant, and class, and the evidence of self-transformation all seemed to contribute to the participant's success in the program. Instructor-directed teaching and cooperative learning were the main learning methods used in the class. General learning strategies employed were the use of core curriculum and authentic documents, and using phonics, repetition, assistive resources, and using activities that appealed to various learning styles. The instructor had a history of both professional development in the area of learning disabilities as well as experience working with learners who had specific learning difficulties. There also seemed to be a goodness of fit between the participant and the instructor. Several characteristics of the participant seemed to aid in his success: his positive self-esteem, self-advocacy skills, self-determination, self-awareness, and the fact that he enjoyed learning. The size (3-5 people) and type of class (small group) also seemed to have an impact. Finally, evidence that the participant went through a self-transformation seemed to contribute to a positive learner identity. These results have implications for practice, theory, and further research in adult education.