Characterization and modelling of software defined radio front-ends

O presente trabalho tem por objectivo estudar a caracterização e modelação de arquitecturas de rádio frequência para aplicações em rádios definidos por software e rádios cognitivos. O constante aparecimento no mercado de novos padrões e tecnologias para comunicações sem fios têm levantado algumas limitações à implementação de transceptores rádio de banda larga. Para além disso, o uso de sistemas reconfiguráveis e adaptáveis baseados no conceito de rádio definido por software e rádio cognitivo assegurará a evolução para a próxima geração de comunicações sem fios. A ideia base desta tese passa por resolver alguns problemas em aberto e propor avanços relevantes, tirando para isso partido das capacidades providenciadas pelos processadores digitais de sinal de forma a melhorar o desempenho global dos sistemas propostos. Inicialmente, serão abordadas várias estratégias para a implementação e projecto de transceptores rádio, concentrando-se sempre na aplicabilidade específica a sistemas de rádio definido por software e rádio cognitivo. Serão também discutidas soluções actuais de instrumentação capaz de caracterizar um dispositivo que opere simultaneamente nos domínios analógico e digital, bem como, os próximos passos nesta área de caracterização e modelação. Além disso, iremos apresentar novos formatos de modelos comportamentais construídos especificamente para a descrição e caracterização não-linear de receptores de amostragem passa-banda, bem como, para sistemas nãolineares que utilizem sinais multi-portadora. Será apresentada uma nova arquitectura suportada na avaliação estatística dos sinais rádio que permite aumentar a gama dinâmica do receptor em situações de multi-portadora. Da mesma forma, será apresentada uma técnica de maximização da largura de banda de recepção baseada na utilização do receptor de amostragem passa-banda no formato complexo. Finalmente, importa referir que todas as arquitecturas propostas serão acompanhadas por uma introdução teórica e simulações, sempre que possível, sendo após isto validadas experimentalmente por protótipos laboratoriais.

The Portuguese continental shelf soft-bottom benthic habitats

As comunidades de macrofauna bentónica são ecológica e economicamente relevantes, sendo fonte de diversos bens e serviços. A sua identificação, caracterização e mapeamento são importantes para identificar áreas marinhas protegidas e para uma melhor utilização do ambiente marinho. Este trabalho apresenta um estudo holístico da diversidade e distribuição espacial das comunidades de macrofauna bentónica ao longo da plataforma continental Portuguesa. Cerca de 145 locais posicionados ao longo da plataforma ocidental e setentrional foram amostrados com uma draga Smith-McIntyre de área 0,1 m2, a profundidades que variaram entre os 13 e 195 metros. Os sedimentos foram caracterizados em termos de granulometria, de matéria orgânica e geoquímica. São propostos seis habitats bentónicos principais para a plataforma continental Portuguesa, analisada a relação entre os dados biológicos e ambientais e discutidas questões biogeográficas relacionadas com a distribuição espacial de espécies e das comunidades. A distribuição da granulometria e assinatura geoquímica dos sedimentos da plataforma continental revelou-se bastante complexa, refletindo importantes diferenças nas fontes (naturais e antropogénicas), origem fluvial, geomorfologia da plataforma, hidrodinamismo e atividade biológica. Relativamente à macrofauna, entre os mais de 30 mil indivíduos recolhidos, foram identificados cerca de 737 taxa, dos quais quatro são novas espécies e aproximadamente 40 correspondem a primeiras ocorrências para a costa Portuguesa. As espécies mais frequentes foram a Ampharete finmarchica, Ampelisca sp. e Lumbrineris lusitanica sp. nov. enquanto as mais abundantes foram Mediomastus fragilis, Polygordius appendiculatus e Ampharete finmarchica. A abundância por local de amostragem variou entre 7 e 1.307 espécimens e a diversidade alfa atingiu um máximo de 96 taxa. Os sedimentos mais grosseiros apresentaram maior diversidade e abundância comparativamente com os sedimentos envasados. Foram identificados seis habitats bentónicos na plataforma continental Portuguesa: (a) sedimentos grosseiros com Protodorvillea kefersteini, Pisione remota, Angulus pygmaeus e várias espécies intersticiais; (b) areias finas hidrodinamicamente expostas e próximas da linha de costa com Magelona johnstoni, Urothoe pulchella e Angulus fabula; (c) comunidade de Abra alba em areia envasadas da plataforma profunda do noroeste; (d) Galathowenia oculata, Lumbrinerides amoureuxi e outros poliquetas escavadores e tubícolas em areais envasadas muito profundas na plataforma sudoeste; (e) Euchone rubrocincta, Nematonereis unicornis e várias espécies setentrionais nas areias envasadas da plataforma sul; (f) vasas com Sternaspis scutata, Heteromastus filiformis e Psammogammarus caecus. A granulometria do sedimento (particularmente teor em finos), matéria orgânica, profundidade e hidrodinamismo foram as variáveis ambientais com a maior relação com os padrões de distribuição da macrofauna. As espécies cosmopolitas e de latitudes superiores (clima Boreal ou Temperado Frio) dominaram o setor noroeste, sendo substituídas por espécies mais quentes na área de transição entre os canhões da Nazaré e S. Vicente, que dominaram por conseguinte a plataforma sul. O presente estudo evidenciou a abundância e diversidade da macrofauna bentónica ao longo da área costeira de Portugal, na qual coexistem faunas das províncias biogeográficas do norte da Europa, bem como subtropicais. Integrado com outro estudos, este poderá ser a base para uma melhor gestão da plataforma continental Portuguesa.

Qualidade e optimização do desmonte de maciços rochosos em geotecnia mineira

A perfuração é uma das operações envolvidas no desmonte de rocha com explosivos. A forma como esta operação é executada é determinante para o sucesso do desmonte. Quando é realizada correctamente o desmonte produz superfícies limpas com o mínimo de sobrescavação e perturbação. A selecção das ferramentas de perfuração é um dos factores preponderantes para os custos do desmonte de maciços rochosos. O objectivo deste trabalho é demonstrar a interdependência entre os parâmetros petrofísicos, geotécnicos e geomecânicos do maciço rochoso e as tecnologias de perfuração de forma a optimizar tanto técnica como economicamente. A forma como a perfuração é executada é determinante para a boa fragmentação do maciço rochoso. Este estudo irá centrar-se na perfurabilidade do maciço, linearidade dos furos, rendimento e desgaste das ferramentas de perfuração e desenvolvimento de metodologias do ciclo de perfuração. Neste trabalho, discute-se a importância de uma abordagem integrativa para fins de geoengenhara mineira em que foi aplicada a técnica de amostragem linear em superfícies expostas do maciço num ambiente de uma exploração granítica. As áreas seleccionadas para este estudo — Pedreira de Serdedelo (Ribeira, Ponte de Lima) e pedreira do Fojo (Ferreira, Paredes de Coura), NW de Portugal — estão situadas nas proximidades de falhas geológicas regionais. Em todo os casos de estudo foram desenvolvidos numa plataforma SIG usando as seguintes ferramentas: cartografia geo-aplicada, técnicas de geologia estrutural, da geotecnia e da geomecânica mineiras e avaliação de geotecnologias. Esta abordagem leva-nos a compreender a relevância da heterogeneidade do maciço rochoso para o dimensionamento da exploração a diferentes escalas. O controlo geomecânico do desmonte do maciço rochoso através de uma perfuração alinhada é salientado com o intuito de uma abordagem de geoengenharia integrada nos maciços rochosos.

Esparsidade como condição na análise espetral

Esta tese apresenta algoritmos que estimam o espetro de um sinal não periódico a partir de um numero finito de amostras, tirando partido da esparsidade do sinal no domínio da frequência. Trata-se de um problema em que devido aos efeitos de leakage, o sucesso dos algoritmos tradicionais esta limitado. Para ultrapassar o problema, os algoritmos propostos transformam a base DFT numa frame com um maior numero de colunas, inserindo um numero reduzido de colunas entre algumas das iniciais. Estes algoritmos são baseados na teoria do compressed sensing, que permite obter e representar sinais esparsos e compressíveis, utilizando uma taxa de amostragem muito inferior à taxa de Nyquist. Os algoritmos propostos apresentam um bom desempenho em comparação com os algoritmos existentes, destacando-se na estimação do espetro de sinais compostos por sinusóides com frequências muito próximas, com amplitudes diferentes e na presença de ruído, situação particularmente difícil e perante a qual os restantes algoritmos falham.

Nanosensor for assessing the risk of a cardiovascular disease

The incidence of cardiovascular diseases (CVD) has been increasing according to the European and global statistics. Thus, the development of new analytical devices, such as biosensors for assessing the risk of CVD could become a valuable approach for the improvement of healthcare service. In latest years, the nanotechnology has provided new materials with improved electronic properties which have an important contribution in the transduction mechanism of biosensors. Thus, in this thesis, biosensors based on field effect transistors with single-walled carbon nanotubes (NTFET) were developed for the detection of C-reactive protein (CRP) in clinical samples, that is, blood serum and saliva from a group of control patients and a group of CVD risk patients. CRP is an acute-phase protein, which is commonly known as the best validated biomarker for the assessment of CVD, the single-walled carbon nanotubes (SWCNT) were applied as transduction components, and the immunoreaction (interaction between the CRP antigen and the antibodies specific to CRP) was used as the mechanism of molecular recognition for the label-free detection of CRP. After the microfabrication of field effect transistors (FET), the screening of the most important variables for the dispersion of SWCNT, the assemblage of NTFET, and their application on standard solutions of CRP, it was found that NTFET respond accurately to CRP both in saliva and in serum samples, since similar CRP levels were found with the NTFET and the traditional methodology (ELISA technique). On the other hand, a strong correlation between salivary and serum CRP was found with NTFET, which means that saliva could be used, based on non-invasive sampling, as an alternative fluid to blood serum. It was also shown that NTFET could discriminate control patients from CVD risk patients, allowing the determination of a cut-off value for salivary CRP of 1900 ng L-1, which corresponds to the well established cut-off of 3 mg L-1 for CRP in serum, constituting an important finding for the possible establishment of a new range of CRP levels based on saliva. According to the data provided from the volunteer patients regarding their lipoprotein profile and lifestyle factors, it was concluded that the control and the CVD risk patients could be separated taking into account the various risk factors established in literature as strong contributors for developing a CVD, such as triglycerides, serum CRP, total cholesterol, LDL cholesterol, body mass index, Framingham risk score, hypertension, dyslipidemia, and diabetes mellitus. Thus, this work could provide an additional contribution to the understanding of the association of biomarkers levels in serum and saliva samples, and above all, cost-effective, rapid, label-free, and disposable NTFET were developed, based on a noninvasive sampling, for the assessment of CVD risk, thus constituting a potential point-of-care technology.

Toxicidade de químicos em mistura: o caso da albufeira do Alqueva

In the environment humans and biota are generally exposed to chemical mixtures rather than individual chemicals. Therefore, when assessing the environmental risk of chemicals, it is important to consider chemical mixtures and their possible interactions. The main objective of this work focused on the environmental risk assessment of pesticides found in the water of the Alqueva reservoir and their binary combinations. In this aquatic ecosystem several pesticides were above of the environmental quality standards. But in addition, there were several sampling points of the reservoir where ecotoxicity was observed despite the presence of these contaminants at low concentrations. Here, a component-based approach was used to assess the effects of the pesticide mixtures. The effects of the binary combinations of four herbicides, atrazine (ATR), terbuthylazine (TER), simazine (SIM) and metolachlor (MET), on the growth rate of the microalgae Pseudokirchneriella subcapitata and the effects of the binary combinations of the s-triazine herbicides ATR and TER and the insecticide chlorpyrifos (CPF) on the swimming behaviour and acetylcholinesterase (AChE) activity of the zebrafish Danio rerio were assessed using the two reference models of concentration addition (CA) and independent action (IA). Moreover, the combined effects of the herbicides (ATR, TER and MET) and the insecticide CPF were also tested on the swimming behaviour and AChE activity of the aquatic midge Chironomus riparius after the cholinesterases characterization. In this risk characterization, the calculated risk quotients for the herbicides ATR, TER, SIM and MET were higher than 1, meaning that these herbicides present a high risk for the Alqueva ecosystem. As expected, the microalgae P. subcapitata was the most sensitive species to the herbicides. However, despite these herbicides pose no or low risk to other aquatic organisms tested in this study, with EC50 values much higher than the concentrations found in this aquatic ecosystem, they are able to increase the toxic effects of CPF when they are tested in binary mixtures. Moreover, the risk quotients of mixtures of these herbicides present simultaneously in three different locations of the reservoir were also higher than 1, so this confirms the fact that these herbicides when present in mixtures, present a greater risk for this ecosystem than the expected considering each single chemical by its own.

Distribuição por tamanhos do aerosol atmosférico na Península Ibérica

Um dos principais fatores que afetam negativamente a qualidade do ambiente em muitas cidades em todo o mundo é o material particulado (PM). A sua presença na atmosfera pode ter impactos negativos na saúde humana, clima, património edificado e ecossistemas. Muitos dos estudos realizados em áreas urbanas focam apenas as frações respiráveis (PM10 e PM2,5). No entanto, os processos de formação, a identificação das fontes emissoras e os efeitos dependem muito da distribuição granulométrica das partículas. A atenção tem recaído na análise de hidrocarbonetos poliaromáticos (PAHs), devida à sua carcinogenicidade e a informação disponível sobre outros compostos é escassa. O presente estudo consistiu na obtenção do PM distribuído por diferentes frações de tamanho e na análise detalhada da sua composição química, em dois locais urbanos da Península Ibérica (Madrid e Lisboa). Dado que os veículos representam uma das principais fontes emissoras em ambientes urbanos, efetuou-se uma caracterização mais detalhada deste tipo de emissões, conduzindo uma campanha de amostragem num túnel rodoviário (Marquês de Pombal, Lisboa). As amostragens, em ambas as cidades, decorreram durante um mês, quer no verão quer no inverno, em dois locais urbanos distintos, um junto a uma via com influência de tráfego e outro numa área urbana de fundo. No túnel a amostragem foi realizada apenas durante uma semana. Em Madrid e no túnel, o PM foi recolhido utilizando um amostrador de elevado volume com impactor em cascata com quatro tamanhos: 10-2,5, 2,5-0,95, 0,95-0,49 e < 0,49 μm. Em Lisboa, foi utilizado um impactor em cascata com apenas dois tamanhos, 10- 2,5 e < 2,5 μm. As amostras foram quimicamente analisadas e determinadas as concentrações de compostos carbonados (OC, EC e carbonatos), iões inorgânicos solúveis em água (Cl−, NO3−, SO42−, Na+, NH4+, K+, Mg2+, Ca2+),metais e compostos orgânicos. Em Madrid, as concentrações médias de PM10 foram 44 e 48% maiores nas amostras recolhidas junto à estrada do que as de fundo urbano no verão e inverno, respetivamente. A fração grosseira e o PM0,5 apresentaram concentrações mais elevadas no verão do que no inverno devido às condições climatéricas pouco usuais. No verão, as amostragens decorreram num mês em que as temperaturas foram muito elevadas e em que ocorreram vários episódios de intrusão de poeira africana. Durante o período de amostragem de inverno, as temperaturas foram muito baixas e registaram-se vários dias de precipitação quer sob a forma de chuva, quer sob a forma de neve. As situações meteorológicas sinóticas mais comuns, incluindo aquelas que causam o transporte de massas de ar com poeiras Africanas, foram identificadas em ambas as estações do ano. As concentrações mássicas de PM10, EC e OC foram encontrados predominantemente na fração de tamanho ultrafino em ambos os locais de amostragem e estações do ano. Nas restantes frações não se observou nenhuma tendência sazonal. O carbono orgânico secundário (SOC) mostrou um claro padrão sazonal, com concentrações muito mais elevadas no verão do que no inverno, em ambos os lugares. A partir do balanço mássico de iões, observou-se que, no verão, a formação de compostos inorgânicos secundários (SIC) conduziu a um enriquecimento pouco comum de Ca2+ na fração submicrométrica, quer nas amostras de tráfego, quer em fundo urbano. Os alcanos, PAHs, os álcoois e os ácidos foram as classes de compostos orgânicos identificados e quantificados no material particulado. Globalmente, representaram 0,26 e 0,11 μg m−3 no verão e inverno, respetivamente, no local de tráfego e 0,28 e 0,035 μg m−3 na área urbana de fundo. Os diferentes compostos orgânicos também apresentaram padrões sazonais, sugerindo fontes de emissão (e.g. escapes dos veículos e fontes biogénicas) ou processos de formação com contribuições variáveis ao longo do ano. As concentrações de benzoapireno equivalente foram menores que 1 ng m-3 e o risco carcinogénico estimado é baixo. No verão, os maiores enriquecimentos de metais ocorreram na fração submicrométrica, e no inverno na fração grosseira. No verão, os enriquecimentos foram ≥ 80% para o Mn, Ni, Cu, Zn, Cd, Sb e Co, no inverno, estes traçadores de emissões do tráfego foram menores, exceto para o Zn. Em Lisboa, a concentração média de PM10 foi de 48 μg m-3 no verão e de 44 μg m-3 no inverno, junto à estrada. Na área de fundo urbano, registaram-se níveis comparáveis nas duas estações (27 μg m-3 e 26 μg m-3). A média do rácio PM2,5/PM10 foi de 65% no verão e 44% no inverno na área de tráfego e 62% e 59% na área urbana de fundo. Estes resultados significam que o PM2,5 é um dos principais contaminantes que afetam a qualidade do ar no centro da cidade de Lisboa. A relação OC/EC, que reflete a composição das emissões de combustão dos veículos, variou entre 0,3 e 0,4 no interior do túnel. Os rácios de OC/EC mínimos obtidos junto às vias de tráfego em Madrid e em Lisboa encontram-se entre os do túnel e os registados em atmosferas urbanas de fundo, sugerindo que os valores mínimos habitualmente obtidos para este parâmetro em ambientes urbanos abertos sobrestimam as emissões diretas de OC pelo transporte rodoviário. Espera-se que os resultados deste trabalho contribuam para suprir, pelo menos em parte, as lacunas de informação quer sobre a composição de várias granulometrias de PM, quer sobre fontes e processos de formação em atmosferas urbanas. Como a exposição a poluentes do ar ultrapassa o controle dos indivíduos e exige ação das autoridades públicas a nível nacional, regional e até mesmo internacional, é importante propor medidas mitigadoras focadas nas principais fontes de emissão identificadas.

Pregnancy and newborns disorders followed by urine metabolomics

Chapter 1 introduces the scope of the work by identifying the clinically relevant prenatal disorders and presently available diagnostic methods. The methodology followed in this work is presented, along with a brief account of the principles of the analytical and statistical tools employed. A thorough description of the state of the art of metabolomics in prenatal research concludes the chapter, highlighting the merit of this novel strategy to identify robust disease biomarkers. The scarce use of maternal and newborn urine in previous reports enlightens the relevance of this work. Chapter 2 presents a description of all the experimental details involved in the work performed, comprising sampling, sample collection and preparation issues, data acquisition protocols and data analysis procedures. The proton Nuclear Magnetic Resonance (NMR) characterization of maternal urine composition in healthy pregnancies is presented in Chapter 3. The urinary metabolic profile characteristic of each pregnancy trimester was defined and a 21-metabolite signature found descriptive of the metabolic adaptations occurring throughout pregnancy. 8 metabolites were found, for the first time to our knowledge, to vary in connection to pregnancy, while known metabolic effects were confirmed. This chapter includes a study of the effects of non-fasting (used in this work) as a possible confounder. Chapter 4 describes the metabolomic study of 2nd trimester maternal urine for the diagnosis of fetal disorders and prediction of later-developing complications. This was achieved by applying a novel variable selection method developed in the context of this work. It was found that fetal malformations (FM) (and, specifically those of the central nervous system, CNS) and chromosomal disorders (CD) (and, specifically, trisomy 21, T21) are accompanied by changes in energy, amino acids, lipids and nucleotides metabolic pathways, with CD causing a further deregulation in sugars metabolism, urea cycle and/or creatinine biosynthesis. Multivariate analysis models´ validation revealed classification rates (CR) of 84% for FM (87%, CNS) and 85% for CD (94%, T21). For later-diagnosed preterm delivery (PTD), preeclampsia (PE) and intrauterine growth restriction (IUGR), it is found that urinary NMR profiles have early predictive value, with CRs ranging from 84% for PTD (11-20 gestational weeks, g.w., prior to diagnosis), 94% for PE (18-24 g.w. pre-diagnosis) and 94% for IUGR (2-22 g.w. pre-diagnosis). This chapter includes results obtained for an ultraperformance liquid chromatography-mass spectrometry (UPLC-MS) study of pre-PTD samples and correlation with NMR data. One possible marker was detected, although its identification was not possible. Chapter 5 relates to the NMR metabolomic study of gestational diabetes mellitus (GDM), establishing a potentially predictive urinary metabolic profile for GDM, 2-21 g.w. prior to diagnosis (CR 83%). Furthermore, the NMR spectrum was shown to carry information on individual phenotypes, able to predict future insulin treatment requirement (CR 94%). Chapter 6 describes results that demonstrate the impact of delivery mode (CR 88%) and gender (CR 76%) on newborn urinary profile. It was also found that newborn prematurity, respiratory depression, large for gestational age growth and malformations induce relevant metabolic perturbations (CR 82-92%), as well as maternal conditions, namely GDM (CR 82%) and maternal psychiatric disorders (CR 91%). Finally, the main conclusions of this thesis are presented in Chapter 7, highlighting the value of maternal or newborn urine metabolomics for pregnancy monitoring and disease prediction, towards the development of new early and non-invasive diagnostic methods.

Characterization of water-soluble organic matter from urban aerosols

Water-soluble organic matter (WSOM) from atmospheric particles comprises a complex array of molecular structures that play an important role on the physic-chemical properties of atmospheric particles and, therefore, are linked to several global-relevant atmospheric processes which impact the climate and public health. Due to the large variety of sources and formation processes, adequate knowledge on WSOM composition and its effects on the properties of atmospheric aerosol are still limited. Therefore, this thesis aims at providing new insights on the molecular composition of WSOM from fine atmospheric aerosols typical of an urban area (Aveiro, Portugal). In a first step, adsorption phenomena of semivolatile organic compounds on quartz fibre filters employed in the collection of atmospheric aerosols were assessed. Afterwards, atmospheric aerosol samples were collected during fifteen months, on a weekly basis. A mass balance of aerosol samples was performed in order to set the relative contribution of elemental carbon, WSOM and water-insoluble organic matter to the aerosol mass collected at the urban area of Aveiro, with a special focus on the assessment of the influence of different meteorological conditions. In order to assess the chemical complexity of the WSOM from urban aerosols, their structural characteristics were studied by means of Fourier transform infrared infrared - Attenuated Total Reflectance (FTIR-ATR) and solid-state cross polarization with magic angle spinning 13C nuclear magnetic resonance (CPMAS 13C NMR) spectroscopies, as well as their elemental composition. The structural characterization of aerosol WSOM samples collected in the urban area highlighted a highly complex mixture of functional groups. It was concluded that aliphatic and aromatic structures, hydroxyl groups and carboxyl groups are characteristic to all samples. The semi-quantitative assessment of the CPMAS 13C NMR data showed different distributions of the various functional groups between the aerosol samples collected at different seasons. Moreover, the presence of signals typical of lignin-derived structures in both CPMAS 13C NMR and FTIR-ATR spectra of the WSOM samples from the colder seasons, highlights the major contribution of biomass burning processes in domestic fireplaces, during low temperature conditions, into the bulk chemical properties of WSOM from urban aerosols. A comprehensive two-dimensional liquid chromatography (LC x LC) method, on-line coupled to a diode array, fluorescence, and evaporative light scattering detectors, was employed for resolving the chemical heterogeneity of the aerosol WSOM samples and, simultaneously, to map the hydrophobicity versus the molecular weight distribution of the samples. The LC x LC method employed a mixed-mode hydrophilic interaction column operating under aqueous reversed phase mode in the first dimension, and a size-exclusion column in the second dimension, which was found to be useful for separating the aerosol WSOM samples into various fractions with distinct molecular weight and hydrophobic features. The estimative of the average molecular weight (Mw) distribution of the urban aerosol WSOM samples ranged from 48 to 942 Da and from 45 to 1241 Da in terms of UV absorption and fluorescence detection, respectively. Findings suggest that smaller Mw group fractions seem to be related to a more hydrophobic nature.

Biology, ecology, population dynamics and distribution of metals in Sepia officinalis on a typical estuarine coastal lagoon - Ria de Aveiro

The common cuttlefish, Sepia officinalis, is a necto-benthic cephalopod that can live in coastal ecosystems, with high influence of anthropogenic pressures and thus be vulnerable to exposure to various types of contaminants. The cuttlefish is a species of great importance to the local economy of Aveiro, considering the global data of catches of this species in the Ria de Aveiro. However, studies on this species in Ria de Aveiro are scarce, so the present study aims to fill this information gap about the cuttlefish in the Ria de Aveiro. The cuttlefish enters Ria de Aveiro in the spring and summer to reproduce, returning to deeper waters in the winter. In terms of abundance, the eastern and center regions of the lagoon, closer to the sea, showed the highest values of abundance, while the northern and southern regions of the main channel had the lowest abundance. This fact may be related to abiotic factors, as well as depth, salinity and temperature. In the most southern point of the Ria de Aveiro (Areão) no cuttlefish was caught. This site had the lowest values of salinity and depth. The cuttlefish has an allometric the females being heavier than males to mantle lengths greater than 82.4 mm. Males reach sexual maturity first than females. In Ria de Aveiro in a generation of parents was found. The cuttlefish, presents itself as opportunistic predators, consuming a wide variety of prey from different taxa. The diet was similar in different sampling locations observing significant differences for the seasons. S. officinalis was captured at 10 sites in the Ria de Aveiro with different anthropogenic sources of contamination. Thus, levels of metals analyzed were similar at all sampling sites, with the exception of a restricted area, Laranjo, which showed higher values. The cuttlefish has the ability to accumulate metals in your body. The levels of Fe, Zn, Cu, Cd, Pb and Hg found in the digestive gland and mantle reflect a differential accumulation of metals in the tissues. This accumulation is related to the type and function of tissue analyzed and the type of metal analysis (essential and non-essential). The metal concentrations in the digestive gland are higher than in the mantle, with the exception of mercury. This may be due to the high affinity of the mantle for the incorporation of methylmercury (MeHg), the most abundant form of mercury. The accumulation of metals can vary over a lifetime, depending on the metal. The concentrations of Zn, Cd and Hg increases throughout life, while Pb decreases and essential metals such as Fe and Cu remain constant. The data collected suggest that the cuttlefish (Sepia officinalis) can be used as a bioindicator of environmental contamination for some metals.

Sustainable viticulture in Bairrada appellation: vineyard and harvest year effects on grapes oenological potential

The sustainable viticulture of a region passes, among other aspects, for maximizing the varieties potential minimizing subsequent interventions during winemaking, which should contribute to the production of quality wines maintaining their typicity and rationalizing costs. The detailed knowledge of each Appellation specificities, namely vineyard parcel (soil type and topographical peculiarities) and harvest climatic conditions is crucial for sustainability in this sector. Thus, in line with this current trend, the starting point for the development of this PhD thesis was to evaluate the oenological potential of different varieties cultivated throughout Bairrada Appellation (Portugal). During maturation several changes in grape varieties occur, namely berries become sweeter, less acidic, and they develop flavour, aroma and colour properties. The development of these characteristics is essential to define grapes oenological potential, i.e. to estimate the possibility of their usage to produce specific wines. A three years sampling plan was designed to evaluate the effect of harvest year and parcel characteristics on V. vinifera cv. Arinto, Bical, Sauvignon Blanc, Baga, Castelão, Touriga Nacional, and Sousão grapes composition. For each variety, 3 parcels with different characteristics were selected. Several physicochemical parameters were evaluated, during maturation: berry weight, pH, titratable acidity, sugar and phenolic contents, antiradical activity, and volatile composition (free fraction). Special attention was devoted to grapes at technologic maturity, since, besides these parameters, glycosidically-linked fraction was also considered. By using the results obtained at technologic maturity, a comprehensive approach was applied to identify the significance of harvest and parcel characteristics effects on each variety composition. Considering all the parameters under study, it may be highlighted some significant differences. According to the obtained results determined during maturation, it was possible to conclude that Arinto, Bical and Sauvignon Blanc grapes from parcels with clay-sandy and clay-calcareous soils have higher phenolic content and antiradical activity. Otherwise, Sauvignon Blanc presented similar volatile composition for grapes cultivated in the 3 parcels, while Arinto and Bical exhibited higher volatile content in grapes from claysandy and clay-calcareous soils. For Baga, Castelão and Touriga Nacional red varieties, grapes with higher phenolic content, antiradical activity, and volatile content were obtained from clayey and clay-calcareous soils. Furthermore, for Touriga Nacional, parcels altitude seems also to modulate grapes composition. Beyond parcel effect, harvest year conditions also influence grapes composition: 2011 harvest was related with lower phenolic and volatile contents, as well as lower antiradical activity.For grapes collected at technologic maturity, analysis of variance-simultaneous component analysis (ASCA) was applied combining all the parameters under study, in order to assess the influence of harvest and parcel characteristics on each variety oenological potential. The results obtained using this comprehensive approach is closely related with those observed during maturation and revealed that harvest was the main factor that influenced grapes composition (53% to 68% of the total data set variance) followed by parcel characteristics, explaining ca. 15-19% of the total data set variance. The oenological potential of each variety may be different from one parcel to another, i.e., clay-sandy and clay-calcareous related-environments seem to favour Arinto and Bical white grapes composition, but for the red varieties, grapes composition was favoured by clayey and clay-calcareous soils. Besides, also higher altitude seems to favour Touriga Nacional grapes composition. Sauvignon Blanc seems to be a variety well adapted to the different parcel characteristics. In order to go forward in the valuation of these varieties, the aroma properties of 6 monovarietal wines were studied based on an aroma network-approach, linking molecular data related to volatile composition and aroma data about the key odor active molecules. This approach allowed to identify different wine aroma properties and to infer about the consumer’s sensory perception. It was found that aroma properties differ from one wine variety to another: while Arinto and Sauvignon Blanc wine exhibited higher tree fruity, sweety and flowery aromas, related essentially with ester compounds and C13 norisoprenoids, the opposite was obtained for Bical wine, corroborating the aroma sensory perceptions of the trained panel. Sauvignon Blanc also exhibited higher toasted aromas (related with thiols, mainly with 2-methyl-3-furanthiol). Touriga Nacional red wine exhibited higher tree, tropical, and berry fruits notes (sensory described as sweet fruits), toasted and flowery aromas, while these are similar for the other red wines under study. Besides Portuguese Bairrada wines, this aroma network approach is a tool that can be used to explain the aroma properties of wines worldwide. The grape and wine data generated under the present PhD thesis, in the context of Bairrada Appellation, shows the unique character of each variety, and may be used by growers and wine producers as a support for decisionmaking based on objective criteria, increasing the sustainability in this sector. For instance, it is possible to take advantage of the natural resources and produce products with different characteristics obtained from the same variety, minimizing costs during the winemaking process.

Monitoring and all-optical signal processing techniques for transparent networks

Optical networks are under constant evolution. The growing demand for dynamism require devices that can accommodate different types of traffic. Thus the study of transparent optical networks arises. This approach makes optical networks more "elegant" , due to a more efficient use of network resources. In this thesis, the author proposes devices that intend to form alternative approaches both in the state of art of these same technologies both in the fitting of this technologies in transparent optical networks. Given that full transparency is difficult to achieve with current technology (perhaps with more developed optical computing this is possible), the author proposes techniques with different levels of transparency. On the topic of performance of optical networks, the author proposes two techniques for monitoring chromatic dispersion with different levels of transparency. In Chapter 3 the proposed technique seems to make more sense for long-haul optical transmission links and high transmission rates, not only due to its moderate complexity but also to its potential moderate/high cost. However it is proposed to several modulation formats, particularly those that have a protruding clock component. In Chapter 4 the transparency level was not tested for various modulation formats, however some transparency is achieved by not adding any electrical device after the receiver (other than an analog-digital converter). This allows that this technique can operate at high transmission rates in excess of 100 Gbit / s, if electro-optical asynchronous sampling is used before the optical receiver. Thus a low cost and low bandwidth photo-detector can be used. In chapter 5 is demonstrated a technique for simultaneously monitoring multiple impairments of the optical network by generating novel performance analysis diagrams and by use of artificial neural networks. In chapter 6 the author demonstrates an all-optical technique for controlling the optical state of polarization and an example of how all-optical signal processing can fully cooperate with optical performance monitoring.

Ecological quality assessment in transitional systems

Estuaries are poles of attraction for human settlement which is a source of pressures to surface water bodies. The implementation of the European Water Framework Directive (WDF, 2000/60/EC) has increased the investigation in order to develop methodologies to assess the Ecological Quality Status (EQS) of aquatic ecosystems. Transitional systems are naturally stressed and characterized by highly dynamic physical, chemical and hydro-morphologic conditions and by species with a higher level of tolerance to change, being more difficult to develop suitable quality indicators for these systems. The general purpose of this study is to test the ability of synthesis descriptors, including primary (S, taxa richness) and derived biological variable (H’, Shannon-Wiener diversity), biotic indices (AMBI and M-AMBI), body size properties (abundance distribution by body size classes, length, weight and length-weight relationships) and non-taxonomic indices (ISS), as well as functional indicators related to the decomposition rates of various experimental substrates, a macrophyte (Phragmites australis) and an alga (Fucus vesiculosus), to evaluate the environmental quality in transitional systems. This study was carried out in one of the most pristine channels of the Ria the Aveiro, Mira Channel, along a full salinity gradient and in a metals and metalloid sediment contamination area, the Estarreja Channel, and two reference channels (Canelas and Salreu). In this study were used different sampling techniques, the leaf-bag technique and a hand-held corer. In Mira Channel, the alga and the macrophyte presented an opposite trend in the decomposition rate along the salinity gradient, with the decomposition rates of the alga always higher than those of the macrophyte. The decomposition rates of the macrophyte and the alga were higher in the mid estuary and in higher salinity areas, respectively, corresponding to the preferencial distribution areas of each species. The macrobenthic fauna associated with the decaying and an artificial substrate (control) showed equally well the benthic succession from the marine to the freshwater areas and, despite the strong differences in the decay rates, no significant differences were found between the benthic communities associated with the alga and the macrophyte. The body size properties of the macrobenthic fauna associated with the P. australis leaf-bag (1mm and 5mm) and corer samples were studied along the full salinity gradient. The dominant species of the sub-set of measured specimens were not the same of the original macrobenthic fauna sampled but, despite that, the sub-set of measured specimens was also able to show the benthic succession from the marine to the freshwater areas. The body size abundance distribution of the benthic macroinvertebrates according to the ISS size classes did not show a particular trend in any sampler along the salinity gradient. Significant differences were found in the length, weight and length-weight relationships of Annelids, , Molluscs and even some species along the salinity gradient. No significant differences were found in the AMBI, M-AMBI and ISS values along the salinity gradient for all the samplers. The EQS of the corer samples obtained using the M-AMBI was lower than that of the leaf-bags. The EQS obtained with the ISS was higher than that obtained with the M-AMBI in the leaf-bags but not in the corer samples. The ecological effects of contaminated sediments associated with the industrial chemical effluents discharged in the Estarreja Channel were studied a decade after ceasing the emissions, using the Sediment Quality Triad approach and two reference channels. The results showed that despite the emissions ceased in 2004, the sediment remains polluted with high levels of metals and metalloid, available to bioaccumulation and with severe consequences at the community level. The sediment contamination problem was also studied using the leaf-bag technique with a macrophyte, an alga and a control substrate. The results showed that the decay rates, the associated macrofauna and the application of the AMBI, M-AMBI and ISS indices to the mesh-bag samples were not able to identify the sediment contamination. Contrarily to the AMBI, the M-AMBI and the ISS showed significant differences between the contaminated and the reference channels for the corer samples. Although such statistical significance, the interest of using these complex biotic indices could be questioned, when much simple ones, like the S and H’ allow to reach the same conclusions.

Compressive sensing in Clifford analysis

Compressed sensing is a new paradigm in signal processing which states that for certain matrices sparse representations can be obtained by a simple l1-minimization. In this thesis we explore this paradigm for higher-dimensional signal. In particular three cases are being studied: signals taking values in a bicomplex algebra, quaternionic signals, and complex signals which are representable by a nonlinear Fourier basis, a so-called Takenaka-Malmquist system.

Integrated coastal geoengineering approach for maritime environments

This dissertation introduces several methodological approaches which integrate a proposed coastal management model in an interdisciplinary perspective. The research presented herein is displayed as a set of publications comprising different thematic outlooks. The thesis develops an integrated coastal geoengineering approach which is intrinsically linked to the studied maritime environments. From sandy coasts and marine works to rocky platforms and sea cliffs, this study includes field work between Caminha – Figueira da Foz (NW Portugal) and Galicia (NW Spain). The research also involves an analysis and geological-geotechnical characterisation of natural rock (armourstone) and artificial units (concrete blocks) applied to coastal structures. The main goal is to contribute to the characterisation and re-evaluation of georesources and to determine armourstone suitability and availability from its source (quarry). It was also important to diagnose the geomaterials in situ concerning their degradation/deterioration level on the basis of the current status of the coastal protection works in order to facilitate more efficient monitoring and maintenance, with economic benefits. In the rocky coast approach the coastal blocks were studied along the platform, but also the geoforms were studied from a coastal morphodynamics point of view. A shoreline evolution analysis was developed for sandy coasts through Digital Shoreline Analysis System (DSAS) extension. In addition, the spatial and statistical analysis applied to sea cliffs allowed the establishment of susceptibility zones to erosion and hazardous areas. All of these studies have different purposes and results however, there is a common denominator – GIS mapping. Hence, apart from the studied coastal environment, there is an integrated system which includes a sequence of procedures and methodologies that persisted during the research period. This is a step forward in the study of different coastal environments by using almost the same methodologies. This will allow the characterisation, monitoring and assessment of coastal protection works, rocky coasts, and shore platforms. With such data, it is possible to propose or recommend strategies for coastal and shoreline management based on several justifications in terms of social, economic, and environmental questions, or even provide a GIS-based planning support system reinforced by geocartographic decisions. Overall the development of the applied cartography embraces six stages which will allow the production of detailed maps of the maritime environment: (1) high-resolution aerial imagery surveys; (2) visual inspection and systematic monitoring; (3) applied field datasheet; (4) in situ evaluation; (5) scanline surveying; and (6) GIS mapping. This thesis covers fundamental matters that were developed over the course of scientific publication and as a consequence they represent the results obtained and discussed. The subjects directly related to the thesis architecture are: (i) cartography applied to coastal dynamics (including an art historical analysis as a tool to comprehend the coastal evolution and the littoral zone); (ii) georesources assessment (the role of cartography in georesources zoning, assessment and armourstone durability); (iii) coastal geoengineering applications and monitoring (Espinho pilot site in NW Portugal as an experimental field); (iv) rocky coast and shore platform studies and characterisation; (v) sandy and mixed environment approaches; (vi) coastal geosciences GIS mapping and photogrammetric surveying (coastal geoengineering); and (vii) shoreline change mapping and coastal management strategies (the CartGalicia Project as an example – NW Spain). Finally, all of these thematic areas were crucial to generate the conceptual models proposed and to shape the future of integrated coastal coastal geoengineering management.