GREEN MACHINING ORIENTED TO DIMINISH DENSITY GRADIENT FOR MINIMIZATION of DISTORTION IN ADVANCED CERAMICS

After sintering advanced ceramics, there are invariably distortions, caused in large part by the heterogeneous distribution of density gradients along the compacted piece. To correct distortions, machining is generally used to manufacture pieces within dimensional and geometric tolerances. Hence, narrow material removal limit conditions are applied, which minimize the generation of damage. Another alternative is machining the compacted piece before sintering, called the green ceramic stage, which allows machining without damage to mechanical strength. Since the greatest concentration of density gradients is located in the outer-most layers of the compacted piece, this study investigated the removal of different allowance values by means of green machining. The output variables are distortion after sintering, tool wear, cutting force, and the surface roughness of the green ceramics and the sintered ones. The following results have been noted: less distortion is verified in the sintered piece after 1mm allowance removal; and the higher the tool wear the worse the surface roughness of both green and sintered pieces.

Attitude stability of artificial satellites subject to gravity gradient torque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Temporal and spatial variability in the macrozoobenthic community along a salinity gradient in the Castillos Lagoon (Uruguay)

The macrozoobenthic community of the Castillos Lagoon system (East Coast of Uruguay) was sampled during autumn, winter, spring and summer of 1991, in order to describe the community structure and the spatial and temporal patterns of distribution. Eleven sampling stations were distributed along a salinity gradient in a north-south direction (8 replicates were collected at each station). The maximum density of organisms was found at the central part of the lagoon (stations 6 and 7) where the bivalve Erodona mactroides and gastropod Heleobia australis were dominants. No significant correlation between the overall abundance of organisms and salinity could be demonstrated (r = 0.43, p > 0.1). However, a reduction in organism abundance between the autumn and the summer coincided with a marked drop in salinity. Falling levels of dissolved oxygen could have influenced the decreasing density of organisms (r = 0.75, p < 0.05). Species richness and diversity were correlated (p < 0.1) with salinity but the degree of correlation was not uniformly significant between sampling periods.

Vertebrate dispersal syndromes along the Atlantic forest: broad-scale patterns and macroecological correlates

Aim To assess the geographical variation in the relative importance of vertebrates, and more specifically of birds and mammals, as seed dispersal agents in forest communities, and to evaluate the influence of geographical and climatic factors on the observed trends.Location One hundred and thirty-five forest communities in the Brazilian Atlantic forest.Methods We collected data on dispersal modes for 2292 woody species. By combining species x site with species x trait matrices, we obtained the percentages of endozoochory, ornithochory, mastozoochory and the mean fruit diameter for the local forest communities. We used Spearman's correlation to assess bivariate relationships between variables. Subsequently, we performed paired t-tests to verify if variations in frequency of dispersal modes and mean fruit diameter were influenced by altitude or temperature. Then, we applied multiple linear regressions to evaluate the effect of geographical and climatic variables on variation in the relative frequency of dispersal modes and mean fruit diameter across communities.Results We found no consistent latitudinal or longitudinal trend in the percentage of vertebrate-dispersed species, neither bird- nor mammal-dispersed species along the Atlantic forest. Endozoochory was affected chiefly by annual mean rainfall, increasing towards moister sites. Forest communities located at higher altitudes had a higher percentage of bird-dispersed species. Even when sites with identical values of annual mean temperature were compared, altitude had a positive effect on ornithochory. Conversely, we found a higher percentage of mammal-dispersed species in warmer forests, even when locations at the same altitudinal belts were contrasted. Fruit diameter was clearly related to altitude, decreasing towards higher elevations.Main conclusions This is the first analysis of a large data set on dispersal syndromes in tropical forest communities. Our findings support the hypotheses that: (1) geographical variation in the relative number of fleshy fruit species is mainly driven by moisture conditions and is relatively independent of geographical location, and (2) broad-scale trends in fruit size correspond to geographical variation in the relative importance of mammals and birds as seed dispersal agents at the community level.

Reproductive phenology of Euterpe edulis (Arecaceae) along a gradient in the Atlantic rainforest of Brazil

The palm Euterpe edulis Mart. is one of the dominant tree species in the Atlantic rainforest and considered a key resource for many frugivorous birds. We compared the reproductive phenology of E. edulis in three types of Atlantic rainforest (two lowland forests, restinga and coastal-plain, and a premontane forest) on Cardoso Island (Cananeia, São Paulo, Brazil), aiming to answer the following questions: (i) whether the reproduction of E. edulis is annual and seasonal across the years in the three forest types studied; (ii) what are the environmental factors influencing the reproductive phenology of E. edulis; and (iii) how does the timing of fruiting and fruit production of E. edulis vary among the three forest types? We evaluated the presence of flowers and fruits (immature, unripe and ripe) from August 2001 to July 2004 in 150 individuals (50 per forest), and estimated the number of infructescences with ripe fruits and the production of fruits and seeds by collecting them on the forest floor in the three forest types. Flowering and fruiting of E. edulis were annual and significantly seasonal in the three forest types, with a high synchrony of flowering and medium to low synchrony of fruiting. Flowering peaked in November and December, and immature and unripe fruits peaked in January and March, all during the rainy season. Immature and unripe fruit phases were correlated with the daylength, precipitation and temperature, important factors for fruits development. Ripe fruits peaked in April and May, in the less rainy season, with significant differences in the mean dates among forests. The number of infructescences with ripe fruits and the biomass of fruits and seeds collected on the ground also differed significantly among the forest types, being greater in the restinga and coastal plain forests, respectively. Differences in productivity were related to palm density in each area and the soil fertility. The complementary fruiting pattern of E. edulis in the forests studied may affect the distribution and abundance of certain frugivorous bird species that feed on their fruits.

Variation in liana abundance and biomass along an elevational gradient in the tropical Atlantic Forest (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seed dispersal and predation in the endemic Atlantic rainforest palm Astrocaryum aculeatissimum across a gradient of seed disperser abundance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Changes in ichthyofauna composition along a gradient from clearwaters to blackwaters in coastal streams of Atlantic forest (southeastern Brazil) in relation to environmental variables

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Calculation of the vacuum pressure gradient in field emission displays

The usual design of field-emission displays (FEDs) often results in high vacuum pressure gradients inside the glass plates of the device, and this is the main limitation to the widespread availability of large area FEDs. In this paper, we perform theoretical calculations using the finite element method for determining the pressure distributions in several pumping configurations, including a new FED configuration known as porous FED or pFED. The approach here is capable of clarifying the design issues influencing the final pressure relevant to the field-emission display devices. (C) 2001 Elsevier B.V. B.V. All rights reserved.

NONDEGENERATE UMBILICS, THE PATH FORMULATION and GRADIENT BIFURCATION PROBLEMS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fish community structure along a conservation gradient in Bodoquena Plateau streams, central West of Brazil.

Aim: To investigate whether composition and structure of stream ichthyofauna vary along the conservation gradient in the Bodoquena Plateau; Methods: Standardized sampling was performed in nine stream stretches (three references, three in the pasture, and three in urban areas), each 80 m long, in April, May and June/08; Results: A quantity of 8,102 individuals representing 36 species was collected. There were no significant differences with respect to absolute species richness among stretches. Urban stretches were more similar to each other than the other two groups, both regarding species composition and abundance. A set of six species was considered an indicator of reference stretches, whereas two were of pasture stretches and four of urban stretches. Poecilia reticulata and Corydoras aeneus, occurring only in urban stretches, were unique in showing the maximum values in the indicator species analysis; Conclusions: Results indicate changes in the ichthyofauna with urbanized surrounding water courses. The presence and abundance of Poecilia reticulata and Corydoras aeneus may indicate the quality loss of these environments.

An adapted thermal-gradient block for the germination of photoblastic seeds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analytical attitude propagation with non-singular variables and gravity gradient torque for spin stabilized satellite

An analytical approach for the spin stabilized satellite attitude propagation is presented using the non-singular canonical variables to describe the rotational motion. Two sets of variables were introduced for Fukushima in 1994 by a canonical transformation and they are useful when the angle between z-satellite axis of a coordinate system fixed in artificial satellite and the rotational angular momentum vector is zero or when the angle between Z-equatorial axis and rotation angular momentum vector is zero. Analytical solutions for rotational motion equations and torque-free motion are discussed in terms of the elliptic functions and by the application of some simplification to get an approximated solution. These solutions are compared with a numerical solution and the results show a good agreement for many rotation periods. When the mean Hamiltonian associated with the gravity gradient torque is included, an analytical solution is obtained by the application of the successive approximations' method for the satellite in an elliptical orbit. These solutions show that the magnitude of the rotation angular moment is not affected by the gravity gradient torque but this torque causes linear and periodic variations in the angular variables, long and short periodic variations in Z-equatorial component of the rotation angular moment and short periodic variations in x-satellite component of the rotation angular moment. The goal of this analysis is to emphasize the geometrical and physical meaning of the non-singular variables and to validate the approximated analytical solution for the rotational motion without elliptic functions for a non-symmetrical satellite. The analysis can be applied for spin stabilized satellite and in this case the general solution and the approximated solution are coincidence. Then the results can be used in analysis of the space mission of the Brazilian Satellites. (C) 2007 COSPAR. Published by Elsevier Ltd. All rights reserved.

Stability analysis of the attitude of artificial satellites subject to gravity gradient torque

Using a canonical formulation, the stability of the rotational motion of artificial satellites is analyzed considering perturbations due to the gravity gradient torque. Here Andoyer's variables are used to describe the rotational motion. One of the approaches that allow the analysis of the stability of Hamiltonian systems needs the reduction of the Hamiltonian to a normal form. Firstly equilibrium points are found. Using generalized coordinates, the Hamiltonian is expanded in the neighborhood of the linearly stable equilibrium points. In a next step a canonical linear transformation is used to diagonalize the matrix associated to the linear part of the system. The quadratic part of the Hamiltonian is normalized. Based in a Lie-Hori algorithm a semi-analytic process for normalization is applied and the Hamiltonian is normalized up to the fourth order. Once the Hamiltonian is normalized up to order four, the analysis of stability of the equilibrium point is performed using the theorem of Kovalev and Savichenko. This semi-analytical approach was applied considering some data sets of hypothetical satellites. For the considered satellites it was observed few cases of stable motion. This work contributes for space missions where the maintenance of spacecraft attitude stability is required.