Pull-out strength of steel roof and wall cladding systems

When steel roof and wall cladding systems are subjected to wind uplift/suction forces, local pull-through/dimpling failures or pull-out failures occur prematurely at their screwed connections. During extreme wind events such as storms and hurricanes, these localized failures then lead to severe damage to buildings and their contents. An investigation was therefore carried out to study the failure that occurs when the screw fastener pulls out of the steel battens, purlins, or girts. Both two-span cladding tests and small-scale tests were conducted using a range of commonly used screw fasteners and steel battens, purlins, and girts. Experimental results showed that the current design formula may not be suitable unless a reduced capacity factor of 0.4 is used. Therefore, an improved design formula has been developed for pull-out failures in steel cladding systems. The formula takes into account thickness and ultimate tensile strength of steel, along with thread diameter and the pitch of screw fasteners, in order to model the pull-out behavior more accurately. This paper presents the details of this experimental investigation and its results.

Cyclic pull-out strength of steel roof and wall cladding systems

When crest-fixed thin steel roof cladding systems are subjected to wind uplift, local pull-through or pull-out failures occur prematurely at their screwed connections. During high wind events such as storms and cyclones these localised failures then lead to severe damage to buildings and their contents. In recent times, the use of thin steel battens/purlins has increased considerably. This has made the pull-out failures more critical in the design of steel cladding systems. Recent research has developed a design formula for the static pull-out strength of steel cladding systems. However, the effects of fluctuating wind uplift loading that occurs during high wind events are not known. Therefore a series of constant amplitude cyclic tests has been undertaken on connections between steel battens made of different thicknesses and steel grades, and screw fasteners with varying diameter and pitch. This paper presents the details of these cyclic tests and the results.

Creeping insulation - Hong Kong green wall

Hong Kong is a densely populated city suffering badly from the urban heat island effect. Green wall offers a means of ameliorating the situation but there are doubts over its suitability in Hong Kong’s unique environment. In this paper, we look at the potential for green walls in Hong Kong first by summarising some of the Chinese green walling systems and associated vegetation in use, then by an introduction to three existing green walls in Hong Kong, and finally through a small experiment aimed at identifying the likely main effects of green walled housing. The results indicate that green walling in Hong Kong is likely to provide enhanced internal house environment in terms of warm weather temperature reduction, stabilisation and damping, with direct energy savings in air-conditioning and indirect district benefits of reduced heat island effect and carbon emissions. The green walling insulation properties also suggest the possibility of warmer homes in winter and/or energy savings in mechanical heating provision.

Creeping insulation - Hong Kong green wall

Hong Kong is a densely populated city suffering badly from the urban heat island effect. Green wall offers a means of ameliorating the situation but there are doubts over its suitability in Hong Kong’s unique environment. In this paper, we look at the potential for green walls in Hong Kong first by summarizing some of the Chinese green walling systems and associated vegetation in use, then by an introduction to three existing green walls in Hong Kong, and finally through a small experiment aimed at identifying the likely main effects of green walled housing. The results indicate that green walling in Hong Kong is likely to provide enhanced internal house environment in terms of warm weather temperature reduction, stabilization and damping, with direct energy savings in air-conditioning and indirect district benefits of reduced heat island effect and carbon emissions. The green walling insulation properties also suggest the possibility of warmer homes in winter and/or energy savings in mechanical heating provision.

Street computing : towards an integrated open data Application Programming Interface (API) for cities

This special issue of the Journal of Urban Technology brings together five articles that are based on presentations given at the Street Computing Workshop held on 24 November 2009 in Melbourne in conjunction with the Australian Computer- Human Interaction conference (OZCHI 2009). Our own article introduces the Street Computing vision and explores the potential, challenges, and foundations of this research trajectory. In order to do so, we first look at the currently available sources of information and discuss their link to existing research efforts. Section 2 then introduces the notion of Street Computing and our research approach in more detail. Section 3 looks beyond the core concept itself and summarizes related work in this field of interest. We conclude by introducing the papers that have been contributed to this special issue.

Risks for HIV infection among male street laborers in urban Vietnam

Risks for HIV infection remain unknown in male street laborers. This research investigates patterns of self-reported risk behaviors among these men in urban Vietnam. In a cross-sectional survey using a social mapping technique, 450 men, mostly low-skilled and unregistered migrant laborers across 13 districts in Hanoi were approached for interviews. The study revealed that male street laborers were at high risk of acquiring and transmitting HIV. One in every 12 men reported homosexual or bisexual behavior. These men on average had three sexual partners within the preceding year, and condom use was inconsistent. Close to 95 % of the men had reported sexual encounters with regular partners. One-third with commercial sex workers (CSW) and 24.2 % with casual partners, but just under one-third had ever used condoms with regular partners and CSWs and very few (17.6 %) with casual partners at their last sexual encounter. 17.11 % used illicit drugs sometimes, with 66.7 % of them frequently sharing injecting equipment with peers. These men had limited HIV knowledge; 51.4 % incorrectly believed that, once you trust your partner, you no longer need to use condoms and 42.4 % believed that you can tell by looking at someone if they have HIV. Access to HIV prevention was also limited; only 19.8 % of men had been tested for HIV during the previous 12 months, almost 10 % of whom neither returned for the result nor knew their HIV status. The study provides interesting directions for future research and suggests ways to effectively design prevention strategies for these men.

Modeling predictors of risky drug use behavior among male street laborers in urban Vietnam

Background The application of theoretical frameworks for modeling predictors of drug risk among male street laborers remains limited. The objective of this study was to test a modified version of the IMB (Information-Motivation-Behavioral Skills Model), which includes psychosocial stress, and compare this modified version with the original IMB model in terms of goodness-of-fit to predict risky drug use behavior among this population. Methods In a cross-sectional study, social mapping technique was conducted to recruit 450 male street laborers from 135 street venues across 13 districts of Hanoi city, Vietnam, for face-to-face interviews. Structural equation modeling (SEM) was used to analyze data from interviews. Results Overall measures of fit via SEM indicated that the original IMB model provided a better fit to the data than the modified version. Although the former model was able to predict a lesser variance than the latter (55% vs. 62%), it was of better fit. The findings suggest that men who are better informed and motivated for HIV prevention are more likely to report higher behavioral skills, which, in turn, are less likely to be engaged in risky drug use behavior. Conclusions This was the first application of the modified IMB model for drug use in men who were unskilled, unregistered laborers in urban settings. An AIDS prevention program for these men should not only distribute information and enhance motivations for HIV prevention, but consider interventions that could improve self-efficacy for preventing HIV infection. Future public health research and action may also consider broader factors such as structural social capital and social policy to alter the conditions that drive risky drug use among these men.

Work and the Welfare State : Street-Level Organizations and Workfare Politics

Work and the Welfare State places street-level organizations at the analytic center of welfare state politics, policy and management. This volume offers a critical examination of efforts to change the welfare state to a workfare state by looking at on-the-ground issues in six countries: the United States, United Kingdom, Australia, Denmark, Germany and the Netherlands.

Effect of cell wall properties of plant tissue on porosity and shrinkage of dried apple

In this study cell wall properties; moisture distribution, stiffness, thickness and cell dimension have been taken into consideration. Cell wall stiffness dependent on complex combination of plant cell microstructures, composition and water holding capacity of the cell. In this work, some preliminary steps taken by investing cell wall properties of apple in order to predict change of porosity and shrinkage during drying. Two different types of apple cell wall characteristic were investigated to correlate with porosity and shrinkage after convective drying. A scanning electron microscope (SEM), 2N Intron, a pyncometer and image J software were used in order to measure and analyze cell characteristics, water dynamics, porosity and shrinkage. Cell stiffness of red delicious apple was found higher than granny smith apples. A significant relationship has found between cell wall characteristics and both heat and mass transfer. Consequently, evolution of porosity and shrinkage noticeably influenced during convective drying by the nature of cell wall. This study has brought better understanding of porosity and shrinkage of dried food stuff in microscopic (cell) level and would provide better insight to attain energy effective drying process and quality food stuff.

Campaigning for street trees, Sydney Botanic Gardens, 1890s to 1920s

Between the 1890s and 1920s street trees became a more prominent feature in streetscapes across New South Wales, Australia. The Sydney Botanic Gardens, with their extensive nursery system, were responsible for supplying seedlings to councils and municipalities for use as street trees. As such, this institution was a primary mover of what a street tree should be, how they should be used and what plants were best suited to this particular use in urban environments. This paper analyses the nurturing of this use of street trees by the Sydney Botanic Gardens and the Director Joseph Maiden. This institution was a place that moved not just stock and seedlings, but ideas about how nature's inclusion into urban environments had the capacity to influence and enhance the cultivation of civilised citizens. This was affected through access to transnational resources available to the Sydney Botanic Gardens.

'Haunts of the street bully' : social reform and the Queensland children's playground movement

This article is about the Queensland children's playground movement and its development in Brisbane. It pays particular attention to three Brisbane playgrounds: Neal Macrossan Playground (formerly Paddington Playground); Bedford Playground (formerly Spring Hill Playground); and the Valley Playground, which has since been replaced by a building. The paper pays especial attention to the work of the local children's playground protagonist Mary Josephine Bedford, which will be seen within the context of the international movement.

Experimental study on the fire performance of superior LSF wall systems

Load bearing Light Gauge Steel Frame (LSF) walls are commonly made of conventional lipped channel sections and gypsum plasterboards. Recently, innovative steel sections such as hollow flange channel sections have been proposed as studs in LSF wall frames with a view to improve their fire resistance ratings. A series of full scale fire tests was then undertaken to investigate the fire performance of the new LSF wall systems under standard fire conditions. Test wall frames made of hollow flange section studs were lined with fire resistant gypsum plasterboards on both sides, and were subjected to increasing temperatures as given by the standard fire curve on one side. Both uninsulated and cavity insulated walls were tested with varying load ratios from 0.2 to 0.6. This paper presents the details of this experimental study on the fire performance of LSF walls and the results. Test results showed that the walls made of the new hollow flange channel section studs have a superior fire performance in comparison to that of lipped channel section stud walls. They also showed that the fire performance of cavity insulated walls was inferior to that of uninsulated walls. The reasons for this fire behaviour are described in this paper.

Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires

Fire safety has become an important part in structural design due to the ever increasing loss of properties and lives during fires. Conventionally the fire rating of load bearing wall systems made of Light gauge Steel Frames (LSF) is determined using fire tests based on the standard time-temperature curve in ISO834 [1]. However, modern commercial and residential buildings make use of thermoplastic materials, which mean considerably high fuel loads. Hence a detailed fire research study into the fire performance of LSF walls was undertaken using realistic design fire curves developed based on Eurocode parametric [2] and Barnett’s BFD [3] curves using both full scale fire tests and numerical studies. It included LSF walls without cavity insulation, and the recently developed externally insulated composite panel system. This paper presents the details of finite element models developed to simulate the full scale fire tests of LSF wall panels under realistic design fires. Finite element models of LSF walls exposed to realistic design fires were developed, and analysed under both transient and steady state fire conditions using the measured stud time-temperature curves. Transient state analyses were performed to simulate fire test conditions while steady state analyses were performed to obtain the load ratio versus time and failure temperature curves of LSF walls. Details of the developed finite element models and the results including the axial deformation and lateral deflection versus time curves, and the stud failure modes and times are presented in this paper. Comparison with fire test results demonstrate the ability of developed finite element models to predict the performance and fire resistance ratings of LSF walls under realistic design fires.

Church's wall of silence on sexual abuse

A SINGLE document was all it took to illuminate a dark secret in the Church of England. The two-page child protection report, unearthed by police in the archives of the diocese of Manchester, was proof, at last, that a former cathedral choirboy -- alleging years of sexual abuse by one of Britain's most senior clergyman -- was not alone. There was another boy. Also a solo soprano, on the other side of the world, who was singing from the same hymn sheet about The Very Reverend Robert Waddington. "There had been a previous referral about sexual impropriety some time ago from Australia, where RW had been the headmaster at a school. An ex-pupil had made a complaint to the Bishop of (north) Queensland who had relayed it to the Archbishop (of York)," the 2003 report says. Eli Ward's family had prompted the secret report when they told church officials, without Ward's knowledge, of the alleged abuse he suffered in the mid-1980s.

Reflexive Dwelling: The body as representation of wall

In a play-within-a-play, the Mechanicals' production within William Shakespeare's A Midsummer Night's Dream, the character Snout announces his transformation to play the character of Wall. Snout's portrayal of Wall is both comical and menacing as he represents the forces that separate the lovers Pyramus and Thisbe. Wall becomes a subject in a manner no different from the lovers that he separates; his influence on their situation is brought to life. The unbecoming nature of walls to demarcate, separate, intimidate, influence and control is a relationship most can relate to in their experiences with architecture. It is in these moments that architecture leaps from the sphere of object into the realm of subject; where we might be involved in some intense struggle with the placement of a wall, the wall that might separate us from a lover, justice, freedom, power or privacy. This study investigates how this struggle is portrayed through the human body as representation of walls in performance.