Low streamflow in the Myakka River Basin Area in Florida

The Sarasota-Manatee area is a water-short area and the study was undertaken in 1963 in order to determine the storage capability and discharge rates of the Myakka water shed. It was found that many of the streams of the water shed were virtually dry during part of every year. However, the basins of the Myakka lakes, through which the river flows offer some storage potential, that if properly developed would provide a continuance drift of about seven million gallons of water per day of good quality water that would be high in color and temperature upon occasion. With reasonable treatment some of this water could be used to meet the present needs of the rapidly expanding coastal areas. (PDF contains 40 pages.)

Springsheds of the Santa Fe River Basin

Powerpoint presentation (PDF has 45 pages.)

Transonic Aeroelastic Numerical Simulation in Aeronautical Engineering

A lower-upper symmetric Gauss-Seidel (LU-SGS) subiteration scheme is constructed for time-marching of the fluid equations. The Harten-Lax-van Leer-Einfeldt-Wada (HLLEW) scheme is used for the spatial discretization. The same subiteration formulation is applied directly to the structural equations of motion in generalized coordinates. Through subiteration between the fluid and structural equations, a fully implicit aeroelastic solver is obtained for the numerical simulation of fluid/structure interaction. To improve the ability for application to complex configurations, a multiblock grid is used for the flow field calculation and transfinite interpolation (TFI) is employed for the adaptive moving grid deformation. The infinite plate spline (IPS) and the principal of virtual work are utilized for the data transformation between the fluid and structure. The developed code was first validated through the comparison of experimental and computational results for the AGARD 445.6 standard aeroelastic wing. Then, the flutter character of a tail wing with control surface was analyzed. Finally, flutter boundaries of a complex aircraft configuration were predicted.

Adsorptive Media Investigations and Testing for Improved Performance of Stormwater Treatment Systems in the Tahoe Basin

Retrofit activities, such as improving hydrology and incorporating more advanced treatment methods into systems where feasible, may improve phosphorus (P) removal performance of current Best Management Practices (BMPs). In the recent past, chemical treatment systems such as chemical dosing and the use of adsorptive media have become more prevalent for treating stormwater and hold promise for improving the P removal performance of stormwater treatment BMPs (Bachand et al., 2005; Patel et al., 2005). Our primary objective for this project has been to investigate whether adsorptive media hold any promise for improving P removal performance of stormwater basins and treatment wetlands at Lake Tahoe.... (PDF contains 99 pages)

BMP treatment technologies, monitoring needs, and knowledge gaps: status of the knowledge and relevance within the Tahoe Basin

This Technical memorandum fulfills Task 2 for Agreement 03-495 between El Dorado County and the Office of Water Programs at California State University Sacramento and their co-authors, Bachand & Associates and the University of California Tahoe Research Group: 1) a review of current stormwater treatment Best Management Practices (BMP) in the Tahoe Basin and their potential effectiveness in removing fine particles and reducing nutrient concentrations; 2) an assessment of the potential for improving the performance of different types of existing BMPs through retrofitting or better maintenance practices; 3) a review of additional promising treatment technologies not currently in use in the Tahoe Basin; and 4) a list of recommendations to help address the knowledge gaps in BMP design and performance. ... (PDF contains 67 pages)

Atlas and zoogeography of common fishes in the Bering Sea and northeastern Pacific

The geographic and depth frequency distribution of 124 common demersal fish species in the northeastern Pacific were plotted from data on me at the Northwest and Alaska Fisheries Center (NWAFC), National Marine Fisheries Service. The data included catch records of fishes and invertebrates from 24,881 samples taken from the Chukchi Sea, throughout the Bering Sea, Aleutian Basin, Aleutian Archipelago, and the Gulf of Alaska, and from southeastern Alaska south to southern California. Samples were collected by a number of agencies and institutions over a 30-year period (1953-83), but were primarily from NWAFC demersal trawls. The distributions of all species with 100 or more occurrences in the data set were plotted by computer. Distributions plotted from these data were then compared with geographic and depth-range limits given in the literature. These data provide new range extensions (geographic, depth, or both) for 114 species. Questionable extensions are noted, the depth ranges determined for 95% of occurrences, and depths of most frequent occurrence are recorded. Ranges of the species were classified zoogeographically, according to life zone, and with regard to the depth zone of greatest occurrence. Because most species examined have broad geographic ranges, they do not provide the best information for testing the validity of proposed zoogeographic province boundaries. Because of the location of greatest sampling effort and methods used in sampling, most fIShes examined were eastern boreal Pacific, sublittoral-bathyal (outer shelf) species. (PDF file contains 158 pages.)

Evaluation of salmon and steelhead spawning habitat quality in the South Fork Trinity River Basin, 1997

Sediment sampling was used to evaluate chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss) spawning habitat quality in the South Fork Trinity River (SFTR) basin. Sediment samples were collected using a McNeil-type sampler and wet sieved through a series of Tyler screens (25.00 mm, 12.50 mm, 6.30 mm, 3.35 mm, 1.00 mm, and 0.85 mm). Fines (particles < 0.85 mm) were determined after a l0-minute settling period in Imhoff cones. Thirteen stations were sampled in the SFTR basin: five stations were located in mainstem SFTR between rk 2.1 and 118.5, 2 stations each were located in EF of the SFTR, Grouse Creek, and Madden Creek, and one station each was located in Eltapom and Hayfork Creeks. Sample means for fines(particles < 0.85 mm) fer SFTR stations ranged between 14.4 and 19.4%; tributary station sample mean fines ranged between 3.4 and 19.4%. Decreased egg survival would be expected at 4 of 5 mainstem SFTR stations and at one station in EF of SFTR and Grouse Creek where fines content exceed 15%. Small gravel/sand content measured at all stations were high, and exceed levels associated with reduced sac fry emergence rates. Reduction of egg survival or sac fry emergence due to sedimentation in spawning gravels could lead to reduced juvenile production from the South Fork Trinity River. (PDF contains 18 pages.)

Age, growth and life history of Klamath River Basin steelhead trout (Onchorhynchus mykiss irideus) as determined from scale analysis

Adult steelhead (Oncorhynchus mykiss irideus) scales were analyzed from eight fall-run, two spring-run, and one winter-run stocks within the Klamath-Trinity River system, from 1981 through 1983, to provide basic information on age, growth, and life history. The higher degree of half-pounder occurrence of upper Klamath River steelhead stocks (86.7 to 100%) compared to Trinity River steelhead stocks (32.0 to 80.0%) was the major life history difference noted in scale analysis. Early life history was similar for all areas sampled with most juveniles (86.4%) remaining in freshwater during the first two years of life before migrating to sea. Repeat spawning ranged from 17.6 to 47.9% for fall-run, 40.0 to 63.6% for spring-run, and 31.1% for winter-run steelhead. Mean length of adults at first spawning was inversely related to percent half-pounder occurrence in each stock. Ages of returning spawners, back calculated lengths at various life stages, and growth information are presented. (PDF contains 22 pages)

Preliminary studies on bamboo floating cage and net enclosure culture in Kainji Lake basin

The main objective of this paper is to introduce bamboo floating cage and net enclosure fish culture technology aimed at producing fish from almost all available inland bodies of water in Nigeria. The experimental approach embarked upon at Kainji Lake Research Institute is discussed. Results obtained from these experiments would help in identifying the inherent problems of this culture system and in determining the urgently needed information that will serve as management and production guidelines for adapting the technology to local conditions of varying ecological characteristics in Nigeria. Ultimately, the project is aimed at increasing the productivity of fishermen/fish farmers and hastening the development of rural communities

Economic analysis of utilizing Kainji gas kiln for fish smoking in the Kainji Lake Basin of Nigeria

Marketing of smoked fish in the Kainji Lake Basin (Nigeria) has been found to be complex, traditional and inefficient. It is also said to be limited in scope due to poor handling and processing techniques, lack of storage facilities and inadequate marketing informations. The invention of Kainji gas kiln has been found suitable to overcoming poor handling and processing techniques. This paper discusses the feasibility of operating Kainji gas kiln commercially supported with adequate storage facilities and competent management hands. The financial indicators of net present value (NPV), 47,481.11, Internal rate of return (IRR) 24% and payback period of 2.3 years that are calculated confirmed that the commercial use of Kainji gas kiln is indeed profitably feasible

Harnessing the fishery potential of man-made lakes for the partial commercialisation of Niger River Basin Development Authority, Minna, Nigeria

Niger River Basin Development Authority Minna (NRBDA) is one of the eleven river basins in Nigeria now undergoing transition towards partial commercialisation. In the light of this the need to be self-sustaining through exploration and exploitation of every possible areas along their operation to yield revenue cannot be over-emphasized. Therefore it is most pertinent to consider fisheries activities along their water bodies as one of the major sources of revenue by organising the local fishermen operating along the water into cooperative bodies and made to pay for fishing rights. Strategies to accomplish this objective is highlighted. The need to embark on aquaculture projects by construction of fish ponds at suitable sites along the reservoirs and developing the recreational potentials of their water bodies as sources of revenue is also stressed

An appraisal of the efficiency of fish marketing system in Lake Chad basin

Fish products from the Chad Basin Lake play important role in meeting fish protein needs of Nigeria: they contribute not less than 25% of the total domestic fish supply and are significant in determining the availability of processed products and reduction of post-harvest losses. Processors, marketers and consumers are the major actors in appraising a marketing system. The results show that most sellers (4-7.5%) are within the age range of 30-39 years. Desires for more earnings led the markets to diversify their business activities to food stuff trading (37.5%), dried meat/livestock sales (37.5%), farming (12.5%), and transportation (12.5%). 65% of traders dispose off their products mostly in the mornings and evenings, 70% of the products are sold smoked while 50% of products are sold to individual consumers. Lake Chad fish products have a long distribution chain. There is also a high degree of buyers and sellers concentration in the primary fish markets and secondary (urban) markets. The products have a vertical regional movement with southern traders (82.5%) dominating the business, thus making the products popular all over Nigeria. Product differentiation with imperfect pricing policy is common occurrence. Lake Chad fish marketing system has distortions that impede its efficiency, recommendations are made on how to ensure a better efficiency of the system

Media of communication among fishermen around Kainji Lake basin

The findings are presented of a study conducted in the framework of the Nigerian-German Kainji Lake Fisheries Promotion Project to examine the role and structure of communication in fishing villages around Kainji Lake in Nigeria. The major aim was to be able to utilize the knowledge at a later stage in the project cycle to pass on fisheries extension messages to fishing communities. The study had the following terms of reference: 1) describe the structure and processes of communication of fishermen around Kainji Lake; 2) identify the formal and informal media of communication used by the fishermen to communicate information concerning their job; 3) describe the problems inhibiting usage of the different media identified; 4) ascertain the extent of use of mass media by fishermen around the lake; and, 5) identify acceptable ways by which fisheries information can be repackaged for the use of extension workers. (PDF contains 58 pages)

Marketing of fishing gear materials and fishing gear making in parts of Kainji Lake basin

The importance of fishing gear in fishing cannot be over-emphasized; as without it fish cannot be obtained. The method used to catch fish affects the condition in which the product is landed. This means that a bad-catching method would produced bad fish to the consumer. To achieve the goal of self-sufficiency in fish production in Nigeria, there is need to address the lingering problems of fishing gear and craft technology, especially in terms of availability of materials and their cost. The sale and making of fishing gear materials are two areas of fisheries, which are yet to be exploited by the general public as forms of businesses for livelihood. The study is conducted in villages around the lower part of Kainji Lake, towards the dam, including New Bussa. It reveals that only the fishermen themselves are involved in making their own fishing gears while those involved in the selling of fishing gear materials like the sheet netting, ropes, twines, floats, sinkers etc are business men and women who may not have any experience of fishing. Also considered in the study is the art of making fishing crafts like the canoe and gourd. Very few entrepreneurs are involved and they are so skilled that each is specialized in the making of only one kind of craft or gear