Information and communication technology for disaster risk management in the Caribbean: subregional solutions to the challenge of limited human resource capacity

This document was adapted from a paper originally presented to the 8th Annual Caribbean Conference of Comprehensive Disaster Management, held in Montego Bay, Jamaica in December, 2013. It summarizes several activities that ECLAC has undertaken to assess the current state of information and communications technology (ICT) in the field of disaster risk management (DRM) as practiced in the Caribbean. These activities included an in-depth study that encompassed a survey of disaster management organizations in the region, an Expert Group Meeting attended by the heads of several national disaster offices, and a training workshop for professionals working in DRM in the Caribbean. One of the notable conclusions of ECLAC’s investigation on this topic is that the lack of human capacity is the single largest constraint that is faced in the implementation of ICT projects for DRM in the Caribbean. In considering strategies to address the challenge of limited human capacity at a regional level, two separate issues are recognized – the need to increase the ICT capabilities of disaster management professionals, and the need to make ICT specialists available to disaster management organizations to advise and assist in the implementation of technology-focused projects. To that end, two models are proposed to engage with this issue at a regional level. The first entails the establishment of a network of ICT trainers in the Caribbean to help DRM staff develop a strategic understanding of how technology can be used to further their organizational goals. The second is the development of “Centres of Excellence” for ICT in the Caribbean, which would enable the deployment of specialized ICT expertise to national disaster management offices on a project-by-project basis.

The tourism sector and the global economic crisis: development implicatins for the Caribbean

Over the past two years the global economy has experienced substantial economic turmoil, resulting in severe economic contraction. While there has been a recent return to growth, this situation has impacted all economic sectors worldwide. In the highly tourism-dependent region of the Caribbean, the impact of the global economic crisis has been most notable on the tourism sector, which, from the early 1990s, became the key driver of economic growth for the region. The eventual emergence of this sector reflects an economic development history which was previously underpinned by the export of agricultural commodities, and subsequently by the adoption of the import substitution industrialization model as promulgated by Arthur Lewis. This was further stimulated by spectacular economic contraction in Caribbean economies during the 1980s as a result of changes in the global terms of trade for commodities, generally low levels of competitiveness for manufactured goods, as well as weak institutional and governance frameworks. Ultimately, many economies began to reflect fiscal and balance of payments constraints. By the end of the 1990s, too, evidence of declining competitiveness even in the tourism sector began to become apparent particularly when evaluated under the framework of the Butler Tourism Area Life- Cycle (TALC) model. The recent economic crisis, therefore, provides an opportunity to reflect on the overall approach to economic development in the Caribbean, and to assess the implications of the region’s response to the crisis. This analysis makes the case for the future development of the sector to be based on two broad strategies. The first is to deepen the integration of the tourism sector into the broader economy through the diversification of the regional tourism product, as well as the enhancement of linkages with other sectors, while the second is to expand the tourism sector into a total service economy through the introduction of new services. Considering linkages, the development of clusters and value chains to support the tourism sector is identified with respect to agriculture and food, handicraft, and furnishings. Among the new services identified are education, wellness, yachting and boating, financial services, and information and communications technologies (ICT). This overall strategy is deemed to be better suited to the macroeconomic realities of the Caribbean, where high labour costs and other structural rigidities require a high-valued specialty tourism product in order to sustain the sector’s global competitiveness.

eHealth handbook for managers of healthcare services and systems

Prefacio de Alicia Bárcena y Luciano Sáez

Resolutions adopted by the Economic Commission for Latin America and the Caribbean at its Thirty-Sixth Session

Resolution 697(XXXVI) Horizons 2030 resolution .-- Resolution 698(XXXVI) ECLAC calendar of conferences for the period 2017-2018 .-- Resolution 699(XXXVI) Regional Conference on Women in Latin America and the Caribbean .-- Resolution 700(XXXVI) Mexico resolution on the establishment of the Forum of the Countries of Latin America and the Caribbean on Sustainable Development .-- Resolution 701(XXXVI) Support for the work of the Latin American and Caribbean Institute for Economic and Social Planning (ILPES) .-- Resolution 702(XXXVI) Statistical Conference of the Americas of the Economic Commission for Latin America and the Caribbean .-- Resolution 703(XXXVI) Regional Conference on Social Development in Latin America and the Caribbean .-- Resolution 704(XXXVI) Programme of work and priorities of the Economic Commission for Latin America and the Caribbean for the biennium 2018-2019 .-- Resolution 705(XXXVI) Caribbean Development and Cooperation Committee .-- Resolution 706(XXXVI) Application of Principle 10 of the Rio Declaration on Environment and Development in Latin America and the Caribbean .-- Resolution 707(XXXVI) Regional Conference on Population and Development in Latin America and the Caribbean .-- Resolution 708(XXXVI) Ministerial Conference on the Information Society in Latin America and the Caribbean .-- Resolution 709(XXXVI) Committee on South-South Cooperation .-- Resolution 710(XXXVI) Conference on Science, Innovation and Information and Communications Technologies of the Economic Commission for Latin America and The Caribbean .-- Resolution 711(XXXVI) Implementation of the Vienna Programme of Action for Landlocked Developing Countries for the Decade 2014-2024 .-- Resolution 712(XXXVI) Regional integration of statistical and geospatial information .-- Resolution 713(XXXVI) Regional follow-up to the outcomes of conferences on financing for development .-- Resolution 714(XXXVI) Place of the next session.

Suitability of carbon fiber-reinforced polymers as power cable cores: Galvanic corrosion and thermal stability evaluation

The increasing demand for electrical energy and the difficulties involved in installing new transmission lines presents a global challenge. Transmission line cables need to conduct more current, which creates the problem of excessive cable sag and limits the distance between towers. Therefore, it is necessary to develop new cables that have low thermal expansion coefficients, low densities, and high resistance to mechanical stress and corrosion. Continuous fiber-reinforced polymers are now widely used in many industries, including electrical utilities, and provide properties that are superior to those of traditional ACSR (aluminum conductor steel reinforced) cables. Although composite core cables show good performance in terms of corrosion, the contact of carbon fibers with aluminum promotes galvanic corrosion, which compromises mechanical performance. In this work, three different fiber coatings were tested (phenol formaldehyde resin, epoxy-based resin, and epoxy resin with polyester braiding), with measurements of the galvanic current. The use of epoxy resin combined with polyester braiding provided the best inhibition of galvanic corrosion. Investigation of thermal stability revealed that use of phenol formaldehyde resin resulted in a higher glass transition temperature. On the other hand, a post-cure process applied to epoxy-based resin enabled it to achieve glass transition temperatures of up to 200 degrees C. (C) 2014 Elsevier Ltd. All rights reserved.

Development and characterization of a distributed measurement system for the evaluation of voltage quality in electric power networks

The research activity carried out during the PhD course in Electrical Engineering belongs to the branch of electric and electronic measurements. The main subject of the present thesis is a distributed measurement system to be installed in Medium Voltage power networks, as well as the method developed to analyze data acquired by the measurement system itself and to monitor power quality. In chapter 2 the increasing interest towards power quality in electrical systems is illustrated, by reporting the international research activity inherent to the problem and the relevant standards and guidelines emitted. The aspect of the quality of voltage provided by utilities and influenced by customers in the various points of a network came out only in recent years, in particular as a consequence of the energy market liberalization. Usually, the concept of quality of the delivered energy has been associated mostly to its continuity. Hence the reliability was the main characteristic to be ensured for power systems. Nowadays, the number and duration of interruptions are the “quality indicators” commonly perceived by most customers; for this reason, a short section is dedicated also to network reliability and its regulation. In this contest it should be noted that although the measurement system developed during the research activity belongs to the field of power quality evaluation systems, the information registered in real time by its remote stations can be used to improve the system reliability too. Given the vast scenario of power quality degrading phenomena that usually can occur in distribution networks, the study has been focused on electromagnetic transients affecting line voltages. The outcome of such a study has been the design and realization of a distributed measurement system which continuously monitor the phase signals in different points of a network, detect the occurrence of transients superposed to the fundamental steady state component and register the time of occurrence of such events. The data set is finally used to locate the source of the transient disturbance propagating along the network lines. Most of the oscillatory transients affecting line voltages are due to faults occurring in any point of the distribution system and have to be seen before protection equipment intervention. An important conclusion is that the method can improve the monitored network reliability, since the knowledge of the location of a fault allows the energy manager to reduce as much as possible both the area of the network to be disconnected for protection purposes and the time spent by technical staff to recover the abnormal condition and/or the damage. The part of the thesis presenting the results of such a study and activity is structured as follows: chapter 3 deals with the propagation of electromagnetic transients in power systems by defining characteristics and causes of the phenomena and briefly reporting the theory and approaches used to study transients propagation. Then the state of the art concerning methods to detect and locate faults in distribution networks is presented. Finally the attention is paid on the particular technique adopted for the same purpose during the thesis, and the methods developed on the basis of such approach. Chapter 4 reports the configuration of the distribution networks on which the fault location method has been applied by means of simulations as well as the results obtained case by case. In this way the performance featured by the location procedure firstly in ideal then in realistic operating conditions are tested. In chapter 5 the measurement system designed to implement the transients detection and fault location method is presented. The hardware belonging to the measurement chain of every acquisition channel in remote stations is described. Then, the global measurement system is characterized by considering the non ideal aspects of each device that can concur to the final combined uncertainty on the estimated position of the fault in the network under test. Finally, such parameter is computed according to the Guide to the Expression of Uncertainty in Measurements, by means of a numeric procedure. In the last chapter a device is described that has been designed and realized during the PhD activity aiming at substituting the commercial capacitive voltage divider belonging to the conditioning block of the measurement chain. Such a study has been carried out aiming at providing an alternative to the used transducer that could feature equivalent performance and lower cost. In this way, the economical impact of the investment associated to the whole measurement system would be significantly reduced, making the method application much more feasible.

Project-based learning using robots with open-source hardware and software

[EN]One of the main issues of the current education system is the lack of student motivation. This aspect together with the permanent change that the Information and Communications Technologies involve represents a major challenge for the teacher: to continuously update contents and to keep awake the student’s interest. A tremendously useful tool in classrooms consists on the integration of projects with participative and collaborative dynamics, where the teacher acts mainly as a guidance to the student activity instead of being a mere knowledge and evaluation transmitter. As a specific example of project based learning, the EDUROVs project consists on building an economic underwater robot using low cost materials, but allowing the integration and programming of many accessories and sensors with minimum budget using opensource hardware and software.

Keeping citizens, companies, and organizations informed by Web KnowARR

For the main part, electronic government (or e-government for short) aims to put digital public services at disposal for citizens, companies, and organizations. To that end, in particular, e-government comprises the application of Information and Communications Technology (ICT) to support government operations and provide better governmental services (Fraga, 2002) as possible with traditional means. Accordingly, e-government services go further as traditional governmental services and aim to fundamentally alter the processes in which public services are generated and delivered, after this manner transforming the entire spectrum of relationships of public bodies with its citizens, businesses and other government agencies (Leitner, 2003). To implement this transformation, one of the most important points is to inform the citizen, business, and/or other government agencies faithfully and in an accessible way. This allows all the partaking participants of governmental affairs for a transition from passive information access to active participation (Palvia and Sharma, 2007). In addition, by a corresponding handling of the participants' data, a personalization towards these participants may even be accomplished. For instance, by creating significant user profiles as a kind of participants' tailored knowledge structures, a better-quality governmental service may be provided (i.e., expressed by individualized governmental services). To create such knowledge structures, thus known information (e.g., a social security number) can be enriched by vague information that may be accurate to a certain degree only. Hence, fuzzy knowledge structures can be generated, which help improve governmental-participants relationship. The Web KnowARR framework (Portmann and Thiessen, 2013; Portmann and Pedrycz, 2014; Portmann and Kaltenrieder, 2014), which I introduce in my presentation, allows just all these participants to be automatically informed about changes of Web content regarding a- respective governmental action. The name Web KnowARR thereby stands for a self-acting entity (i.e. instantiated form the conceptual framework) that knows or apprehends the Web. In this talk, the frameworks respective three main components from artificial intelligence research (i.e. knowledge aggregation, representation, and reasoning), as well as its specific use in electronic government will be briefly introduced and discussed.

Cloud-based Orchestration of Multimedia Services and Applications

The Mobile Cloud Networking project develops among others, several virtualized services and applications, in particular: (1) IP Multimedia Subsystem as a Service that gives the possibility to deploy a virtualized and on-demand instance of the IP Multimedia Subsystem platform, (2) Digital Signage Service as a Service that is based on a re-designed Digital Signage Service architecture, adopting the cloud computing principles, and (3) Information Centric Networking/Content Delivery Network as a Service that is used for distributing, caching and migrating content from other services. Possible designs for these virtualized services and applications have been identified and are being implemented. In particular, the architectures of the mentioned services were specified, adopting cloud computing principles, such as infrastructure sharing, elasticity, on-demand and pay-as-you-go. The benefits of Reactive Programming paradigm are presented in the context of Interactive Cloudified Digital Signage services in a Mobile Cloud Platform, as well as the benefit of interworking between different Mobile Cloud Networking Services as Digital Signage Service and Content Delivery Network Service for better performance of Video on Demand content deliver. Finally, the management of Service Level Agreements and the support of rating, charging and billing has also been considered and defined.

Mobility and bandwidth prediction in virtualized LTE systems: Architecture and challenges

Long Term Evolution (LTE) represents the fourth generation (4G) technology which is capable of providing high data rates as well as support of high speed mobility. The EU FP7 Mobile Cloud Networking (MCN) project integrates the use of cloud computing concepts in LTE mobile networks in order to increase LTE's performance. In this way a shared distributed virtualized LTE mobile network is built that can optimize the utilization of virtualized computing, storage and network resources and minimize communication delays. Two important features that can be used in such a virtualized system to improve its performance are the user mobility and bandwidth prediction. This paper introduces the architecture and challenges that are associated with user mobility and bandwidth prediction approaches in virtualized LTE systems.

Innovation Processes and Industrial Districts

In this survey, we examine the operations of innovation processes within industrial districts by exploring the ways in which differentiation, specialization, and integration affect the generation, diffusion, and use of new knowledge in such districts. We begin with an analysis of the importance of the division of labor and then investigate the effects of social embeddedness on innovation. We also consider the effect of forms of organization within industrial districts at various stages of product and process life, and we examine the negative aspects of embeddedness for innovation. We conclude with a discussion of the possible consequences of new information and communications technologies on innovation in industrial districts.

Clean Coal Technologies Scenario and Evaluation of Present CO2 Dwindling Initiatives to Approach Zero Emission Power Stations By Coal Combustion. Deployment Situation and Evaluation Study

In the present uncertain global context of reaching an equal social stability and steady thriving economy, power demand expected to grow and global electricity generation could nearly double from 2005 to 2030. Fossil fuels will remain a significant contribution on this energy mix up to 2050, with an expected part of around 70% of global and ca. 60% of European electricity generation. Coal will remain a key player. Hence, a direct effect on the considered CO2 emissions business-as-usual scenario is expected, forecasting three times the present CO2 concentration values up to 1,200ppm by the end of this century. Kyoto protocol was the first approach to take global responsibility onto CO2 emissions monitoring and cap targets by 2012 with reference to 1990. Some of principal CO2emitters did not ratify the reduction targets. Although USA and China spur are taking its own actions and parallel reduction measures. More efficient combustion processes comprising less fuel consuming, a significant contribution from the electricity generation sector to a CO2 dwindling concentration levels, might not be sufficient. Carbon Capture and Storage (CCS) technologies have started to gain more importance from the beginning of the decade, with research and funds coming out to drive its come in useful. After first researching projects and initial scale testing, three principal capture processes came out available today with first figures showing up to 90% CO2 removal by its standard applications in coal fired power stations. Regarding last part of CO2 reduction chain, two options could be considered worthy, reusing (EOR & EGR) and storage. The study evaluates the state of the CO2 capture technology development, availability and investment cost of the different technologies, with few operation cost analysis possible at the time. Main findings and the abatement potential for coal applications are presented. DOE, NETL, MIT, European universities and research institutions, key technology enterprises and utilities, and key technology suppliers are the main sources of this study. A vision of the technology deployment is presented.

Balancing software engineering education and industrial needs

In the world of information and communications technologies the demand for professionals with software engineering skills grows at an exponential rate. On this ground, we have conducted a study to help both academia and the software industry form a picture of the relationship between the competences of recent graduates of undergraduate and graduate software engineering programmes and the tasks that these professionals are to perform as part of their jobs in industry. Thanks to this study, academia will be able to observe which skills demanded by industry the software engineering curricula do or do not cater for, and industry will be able to ascertain which tasks a recent software engineering programme graduate is well qualified to perform. The study focuses on the software engineering knowledge guidelines provided in SE2004 and GSwE2009, and the job profiles identified by Career Space.

Consolidation of a wsn and minimax method to rapidly neutralise intruders in strategic installations

Due to the sensitive international situation caused by still-recent terrorist attacks, there is a common need to protect the safety of large spaces such as government buildings, airports and power stations. To address this problem, developments in several research fields, such as video and cognitive audio, decision support systems, human interface, computer architecture, communications networks and communications security, should be integrated with the goal of achieving advanced security systems capable of checking all of the specified requirements and spanning the gap that presently exists in the current market. This paper describes the implementation of a decision system for crisis management in infrastructural building security. Specifically, it describes the implementation of a decision system in the management of building intrusions. The positions of the unidentified persons are reported with the help of a Wireless Sensor Network (WSN). The goal is to achieve an intelligent system capable of making the best decision in real time in order to quickly neutralise one or more intruders who threaten strategic installations. It is assumed that the intruders’ behaviour is inferred through sequences of sensors’ activations and their fusion. This article presents a general approach to selecting the optimum operation from the available neutralisation strategies based on a Minimax algorithm. The distances among different scenario elements will be used to measure the risk of the scene, so a path planning technique will be integrated in order to attain a good performance. Different actions to be executed over the elements of the scene such as moving a guard, blocking a door or turning on an alarm will be used to neutralise the crisis. This set of actions executed to stop the crisis is known as the neutralisation strategy. Finally, the system has been tested in simulations of real situations, and the results have been evaluated according to the final state of the intruders. In 86.5% of the cases, the system achieved the capture of the intruders, and in 59.25% of the cases, they were intercepted before they reached their objective.