Tariff Equivalent of Technical Barriers to Trade with Imperfect Substitution and Trade Costs, November 2005

The price-wedge method yields a tariff-equivalent estimate of technical barriers to trade (TBT). An extension of this method accounts for imperfect substitution between domestic and imported goods and incorporates recent findings on trade costs. We explore the sensitivity of this revamped TBT estimate to its key determinants (substitution elasticity, preference for home good, and trade cost). We use the augmented approach to investigate the ongoing US-Japan apple trade dispute and find that removing the Japanese TBT would yield limited export gains to the United States. We then draw policy implications of our findings.

Technical note: Preliminary estimation of rockfall runout zones

Rockfall propagation areas can be determined using a simple geometric rule known as shadow angle or energy line method based on a simple Coulomb frictional model implemented in the CONEFALL computer program. Runout zones are estimated from a digital terrain model (DTM) and a grid file containing the cells representing rockfall potential source areas. The cells of the DTM that are lowest in altitude and located within a cone centered on a rockfall source cell belong to the potential propagation area associated with that grid cell. In addition, the CONEFALL method allows estimation of mean and maximum velocities and energies of blocks in the rockfall propagation areas. Previous studies indicate that the slope angle cone ranges from 27° to 37° depending on the assumptions made, i.e. slope morphology, probability of reaching a point, maximum run-out, field observations. Different solutions based on previous work and an example of an actual rockfall event are presented here.

Design Guide and Construction Specifications for National Pollutant Discharge Elimination System (NPDES) Site Runoff Control, 2006

According to the 1972 Clean Water Act, the Environmental Protection Agency (EPA) established a set of regulations for the National Pollutant Discharge Elimination System (NPDES). The purpose of these regulations is to reduce pollution of the nation’s waterways. In addition to other pollutants, the NPDES regulates stormwater discharges associated with industrial activities, municipal storm sewer systems, and construction sites. Phase II of the NPDES stormwater regulations, which went into effect in Iowa in 2003, applies to construction activities that disturb more than one acre of ground. The regulations also require certain communities with Municipal Separate Storm Sewer Systems (MS4) to perform education, inspection, and regulation activities to reduce stormwater pollution within their communities. Iowa does not currently have a resource to provide guidance on the stormwater regulations to contractors, designers, engineers, and municipal staff. The Statewide Urban Design and Specifications (SUDAS) manuals are widely accepted as the statewide standard for public improvements. The SUDAS Design manual currently contains a brief chapter (Chapter 7) on erosion and sediment control; however, it is outdated, and Phase II of the NPDES stormwater regulations is not discussed. In response to the need for guidance, this chapter was completely rewritten. It now escribes the need for erosion and sediment control and explains the NPDES stormwater regulations. It provides information for the development and completion of Stormwater Pollution Prevention Plans (SWPPPs) that comply with the stormwater regulations, as well as the proper design and implementation of 28 different erosion and sediment control practices. In addition to the design chapter, this project also updated a section in the SUDAS Specifications manual (Section 9040), which describes the proper materials and methods of construction for the erosion and sediment control practices.

Review of Inconsistencies Between SUDAS and Iowa DOT Specifications, May 2006

The objectives of this multi-part project were to review the Iowa DOT Specifications and SUDAS Specifications section by section and develop recommendations for possible changes that will allow the two specifications to be used together.

Offshoring and directed technical change

To study the short-run and long-run implications on wage inequality, we introducedirected technical change into a Ricardian model of offshoring. A unique final good isproduced by combining a skilled and an unskilled product, each produced from a continuumof intermediates (tasks). Some of these tasks can be transferred from a skill-abundant Westto a skill-scarce East. Profit maximization determines both the extent of offshoring andtechnological progress. Offshoring induces skill-biased technical change because it increasesthe relative price of skill-intensive products and induces technical change favoring unskilledworkers because it expands the market size for technologies complementing unskilled labor.In the empirically more relevant case, starting from low levels, an increase in offshoringopportunities triggers a transition with falling real wages for unskilled workers in the West,skill-biased technical change and rising skill premia worldwide. However, when the extentof offshoring becomes sufficiently large, further increases in offshoring induce technicalchange now biased in favor of unskilled labor because offshoring closes the gap betweenunskilled wages in the West and the East, thus limiting the power of the price effectfueling skill-biased technical change. The unequalizing impact of offshoring is thus greatestat the beginning. Transitional dynamics reveal that offshoring and technical change aresubstitutes in the short run but complements in the long run. Finally, though offshoringimproves the welfare of workers in the East, it may benefit or harm unskilled workers inthe West depending on elasticities and the equilibrium growth rate.

Technical inefficiency and public capital in US States: A stochastic frontier approach

This paper estimates a translog stochastic frontier production function in the analysis of all 48 contiguous U.S. states in the period 1970-1983, to attempt to measure and explain changes in technical efficiency. The model allows technical inefficiency to vary over time, and inefficiency effects to be a function of a set of explanatory variables in which the level and composition of public capital plays an important role. Results indicated that U.S. state inefficiency levels were significantly and positively correlated with the ratio of public capital to private capital. The proportion of public capital devoted to highways is negatively correlated with technical inefficiency, suggesting that not only the level but also the composition of public capital influenced state efficiency.

The hotel industry and its importance in the technical and economic development of a region : the Lake Geneva case (1852-1914)

The historiography dedicated to tourism has emphasised how some socio-economic evolutions such as urbanisation, mechanisation of transport or the advent of leisure time in society have supported pleasure trips and therefore the development of the hotel industry. On the contrary, the research has too often neglected or at least minimised the impact of the hotel sector on a region's development. This contribution seeks to fill this gap by analysing the Geneva Lake region, one of the most important birthplaces of the European tourism. In this space not much touched by the first industrial revolution, the hotel business has in fact played the role of an economic motor, stimulating investment and employment. This dynamism provoked a domino effect on several other sectors of the economy (industry, bulding sector, banking). To please their customers, the hoteliers have not only given impulses on housing modernisation, but also to the revitalisation of transport, energy and communication networks. The necessity to remain on the state-of-the-art of technical issues, with the concern of competitiveness, has called forth an acceleration of the technology transfer and stimulated the constitution of technical know-how.

North-south trade and directed technical change

In a world where poor countries provide weak protection for intellectual propertyrights, market integration shifts technical change in favor of rich nations. Throughthis channel, free trade may amplify international income differences. At the sametime, integration with countries where intellectual property rights are weakly protectedcan slow down the world growth rate. A crucial implication of these results is thatprotection of intellectual property is most beneficial in open countries. This prediction,which is novel in the literature, finds support in the data on a panel of 53 countriesobserved in the years 1965-1990.

Embodied technical change and the fluctuations of wages and unemployment

The paper shows that a matching model where technological change is partially embodied in the job match is successful in explaining the variability of unemployment and vacancies. If we incorporate long-term wage contracts into the model, it also explains a number of stylized facts on the dynamics of real wages, which have been found in the empirical labor literature.

Posterior quadrantic epilepsy surgery: technical variants, surgical anatomy, and case series.

OBJECTIVE: Patients with intractable epilepsy due to extensive lesions involving the posterior quadrant (temporal, parietal, and occipital lobes) form a small subset of epilepsy surgery. This study was done with a view to analyze our experience with this group of patients and to define the changes in the surgical technique over the last 15 years. We also describe the microsurgical technique of the different surgical variants used, along with their functional neuroanatomy. METHODS: In this series there were 13 patients with a median age of 17 years. All patients had extensive presurgical evaluation that provided concordant evidence localizing the lesion and seizure focus to the posterior quadrant. The objective of the surgery was to eliminate the effect of the epileptogenic tissue and preserve motor and sensory functions. RESULTS: During the course of this study period of 15 years, the surgical procedure performed evolved toward incorporating more techniques of disconnection and minimizing resection. Three technical variants were thus utilized in this series, namely, (i) anatomical posterior quadrantectomy (APQ), (ii) functional posterior quadrantectomy (FPQ), and (iii) periinsular posterior quadrantectomy (PIPQ). After a median follow-up period of 6 years, 12/13 patients had Engel's Class I seizure outcome. CONCLUSION: The results of surgery for posterior quadrantic epilepsy have yielded excellent seizure outcomes in 92% of the patients in the series with no mortality or major morbidity. The incorporation of disconnective techniques in multilobar surgery has maintained the excellent results obtained earlier with resective surgery.

Propuesta creativa para la nueva línea de vinos ENJOYME

El projecte presentat en aquest document formal conté la proposta per a la nova marca de vins Enjoyme, el projecte consta de la creació de diverses peces gràfiques per tal de construir una proposta global per a la marca. L’encàrrec per part del client consta de: construcció de marca Enjoyme (logotip), lloc web enfocat a la venda on line, packaging del producte, OPI i revista digital. Cadascuna d’aquestes peces es troba explicada detalladament dins d’aquest document amb les seves respectives especificacions creatives, tècniques, estratègiques i econòmiques. El concepte creatiu d’aquesta campanya “Cultiva els teus sentits” està reflectit en cadascuna de les peces, formant un equilibri en conjunt. La idea central de la campanya s’enfoca a transmetre als clients totes les sensacions que li pot donar la natura en ser humà, tenint en compte l’orgànic i biodinàmic com a part fonamental del projecte, ja que aquest producte elaborat amb aquest tipus d’agricultura.

Environmental Services - Recycling Technical Assistance,

Iowa is one of the more progressive recycling states in the U.S. due in large part to its environmental technical assistance programs for business. The Iowa Department of Economic Development (IDED), Iowa Department of Natural Resources (IDNR), the Recycle Reuse Technology Transfer Center (RRTTC) and the Iowa Waste Reduction Center (IWRC) work together to offer services that help businesses save money, increase operational efficiencies, enhance regulatory compliance and manage difficult waste management issues.