Dolomite and phosphogypsum surface application effects on annual crops nutrition and yield

Brazil has extensive area with acid soils. Using phosphogypsum and soil acidity tolerant cultivars are alternatives to crop establishment in no-till system without previous limestone incorporation in many agricultural soils of Brazil. However, it remains unknown how phosphogypsum and limestone surface application affects rice (Oryza sativa L.) and common bean (Phaseolus vulgaris L.) nutrition and yield under a no-till system. A field experiment was conducted in a sandy clay loam, kaolinitic, thermic Typic Haplorthox, previously cultivated under conventional tillage, in Botucatu, Sao, Paulo State, Brazil. Treatments included four dolomitic limestone rates (0, 1100, 2700, and 4300 kg ha(-1)), two phosphogypsum rates (0 and 2100 kg ha(-1)), and two upland rice cultivars (Caiapo and IAC 202). in 2002-2003, and two bean cultivars (Perola and Carioca), in 2003-2004. Both amendments were applied on the surface, without soil incorporation. The content of Ca, Mg, and Mn in flag leaves and rice yield increased with limestone surface application. Liming increased the shoot dry matter of IAC 202 rice. Phosphogypsum increased S contents in leaves of both rice cultivars, and resulted in higher grain yield in the Caiapo rice. Liming increased K contents in leaves of both bean cultivars. In the absence of phosphogypsum, liming increased S contents and grain yield of bean. Content of Mg in leaves was reduced by phosphogypsum in lower limestone rates. In phosphogypsum presence, liming reduced Zn contents in leaves and increased bean shoot dry matter. Phosphogypsum increased Ca and S, and reduced Mg contents in bean leaves. Using soil acidity tolerant cultivars promoted higher crop yields in no-till systems establishment, even when the effective soil amelioration had not yet been achieved.

Gas exchange rates, plant height, yield components, and productivity of upland rice as affected by plant regulators

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fontes e doses de manganês no acúmulo de nutrientes na palhada em cana-de-açúcar

The sugar cane crop uptake high amount of nutrients from the soil and the lack of these elements can result in low productivity of this crop. This study aimed to evaluate the effect of sources and doses of manganese on the accumulation of macro-and micronutrients of straw and stalk yield in the sugar cane crop. The experiment was conducted at Fujimoto farm, area administered by the Vale do Parana SA Alcohol and Sugar located in Suzanapolis - SP county. The experimental design was randomized blocks in a factorial scheme 5x3, with five levels of manganese and three sources, applied at planting, in four replications. The plots consisted of four rows 5 m long, spaced by 1.5 m. The variety used was RB 86-7515. The variables analyzed in the sugar cane plant and sugar cane ratoon cane were: accumulation of macro-and micronutrients, dry weight of straw and crop yield. The sources Mn influenced the accumulation of N, P and K in the straw cane plant and ratoon sugar cane in the accumulation of K, Ca, S, B, Mn and Zn. The increasing levels of Mn increased the cumulative amount of Ca, Mg, S and Mn in the cane plant and stubble of Ca, Fe and Mn in sugar cane ratoon. The sources of Mn did not influence the dry matter yields of straw and stalk, so as to plant cane to first sugar cane ratoon. The levels of Mn influenced linearly the dry straw on cane plant. As for the stem yield of sugarcane plant and sugar cane ratoon was not influenced by the levels of Mn.

Inter-relation between soybean yield and soil compaction under degraded pasture in Brazilian Savannah

As pastagens cultivadas do Cerrado brasileiro são responsáveis pela metade da produtividade da carne bovina destinada à alimentação da população, enquanto as culturas agrícolas o são pela terça parte de sua produtividade de grãos, desempenhando importante papel econômico-financeiro para o país. Dessa forma, no ano agrícola 2005/2006, na Fazenda de Ensino e Pesquisa da Faculdade de Engenharia de Ilha Solteira - FEIS/UNESP, foram estudadas a variabilidade e a dependência espacial entre atributos físicos do solo e a produtividade da soja, quando rotacionados após a pastagem degradada com Brachiaria, sobre um Latossolo Vermelho distroférrico. Também foram estudadas correlações lineares e espaciais entre esses atributos, apurando condições que proporcionassem aumento da produtividade agrícola. Para isso, na área com a referida pastagem instalou-se uma malha contendo 124 pontos amostrais, com espaçamentos de 10,0 x 10,0 e de 5,0 x 5,0 m entre eles, numa área total de 7.500 m². Dos pontos de vista linear e espacial, a elevada produtividade de grãos de soja pode ser explicada em razão do número de grãos por planta e da macroporosidade do solo. A alta variabilidade obtida na maioria dos atributos do solo denotou que a integração lavoura-pecuária é um sistema que proporciona heterogeneidade do ambiente físico do solo.

Ostrich (Struthio camellus) carcass yield and meat quality parameters

This article aimed at compiling recent studies on the main factors that influence ostrich meat quality and carcass yield. Few articles investigated the effect of subspecies, which generally are not even mentioned. There are important dietary effects, particularly those caused by dietary protein to energy ratio. Rigor mortis follow-up studies showed that there are no losses in meat quality when carcasses are hot-deboned. Age at slaughter influences some meat quality traits, such as tenderness and lipid content. Few effects of gender have been observed, and at the same age at slaughter, both male and female present the same meat quality traits.

Produtividade e desenvolvimento da cana-planta e soca em função de doses e fontes de manganês

A cana-de-açúcar possui grande importância econômico-social e política para o Brasil. Este trabalho teve como objetivo avaliar o efeito de doses e fontes de manganês nessa cultura. O experimento foi realizado no sítio Fujimoto, área administrada pela Destilaria Vale do Paraná S/A Álcool e Açúcar, no município de Suzanápolis, SP. O delineamento experimental utilizado foi o de blocos ao acaso no esquema fatorial 5 x 3, sendo cinco doses de Mn (0; 2,5; 5,0; 7,5; e 10,0 kg ha-1) e três fontes (quelato, FTE e sulfato de manganês), aplicadas no sulco de plantio, em quatro repetições. As parcelas foram constituídas por quatro linhas de 5 m de comprimento e espaçadas 1,5 m. A variedade de cana-de-açúcar utilizada foi a RB 86-7515, realizando-se dois cortes. As fontes de Mn proporcionaram semelhantes produtividades de colmos, tanto da cana-planta quanto da primeira cana-soca. O quelato de Mn proporcionou maior número de colmo por metro de sulco na cana-soca. As doses de Mn não influenciaram a produtividade de colmos da cana-planta e da cana- soca, porém aumentaram o número de internódios e o diâmetro de colmo na cana-planta até as doses de 6,9 e 6,6 kg ha-1 de Mn, respectivamente.

Plant spacing and pollen quantity on yield and quality of squash seeds

O rendimento e a qualidade de sementes de abóbora podem ser aprimorados por uma densidade populacional de plantas adequada, além da quantidade de pólen, que influi na qualidade da polinização e fertilização. Para este estudo, aplicaram-se nove tratamentos, que resultaram da combinação fatorial de três espaçamentos entre plantas (0,8 x 0,3; 0,8 x 0,6 e 0,8 x 0,9 m) com duas quantidades de pólen (50% de uma antera e uma antera inteira) e a polinização natural por insetos. Foram avaliados parâmetros de produção de frutos e sementes, além da qualidade física e fisiológica das sementes. O delineamento experimental adotado foi em blocos ao acaso com cinco repetições e dez plantas úteis por amostragem. O aumento do espaçamento entre plantas elevou o número médio de frutos maduros e a produção de sementes por planta. A produtividade de sementes foi diretamente proporcional à quantidade de pólen usada durante a polinização. Já o fator espaçamento entre plantas não afetou a produção de sementes por área. A maior quantidade de pólen resultou em uma maior produção de sementes por planta e por área. A polinização manual, com a utilização de uma antera inteira, não diferiu da polinização natural com insetos, tanto para rendimento como para a qualidade de sementes.

Effects of age at first calving, gestation length and dry period on milk yield in a Gyr herd

Relationships of several reproductve traits and milk yield were studied in 716 Gyr cows at Sant'Ana da Serra farm, Mococa, State of São Paulo, a humid tropical climate region. Mean age at first calving was 49.8 +/- 0.4 months, with a coeficient of cariation (C. V.) of 20.8%. Only year of parturition significantly affected age at first calving (P < 0.01). Heritability, estimated from paternal half-sib correlations, was 0.91 +/- 0.20, a value considered unrealistically high. Overall mean gestation length was 287.7 +/- 0.5 days (C. V. = 3.3%) for 419 observations, with month and year of parturition having significant effects. Heritability estimate was 0.30 +/- 0.14. Overall mean dry period for 1.276 observations was 238 +/- 3 days (C. V. = 48%); repeatability estimate was 0.19 +/- 0.06. Estimated annual genetic trend for dry period was -0.6 days, phenotypic trend was 11.5 days, and environmental trend, 12.1 days. Month and year of parturition and cow age had no significant effect on dry period. Highest milk yield was obtained at fourth lactation. The gross correlation between milk yield and gestation period was 0.11, and between previous dry period and subsequent milk yield, 0.16. Normal gestations of 285 to 290 days were associated with higher milk yields. Milk yield increased as dry period advanced from 30 to 390 days, and declined as dry period continued beyond 390 days. Delays in first mating and a more extensive dry period decreased reproductive efficiency in the herd studied.

Popcorn (Zea mays L. var. everta) yield and yield components as influenced by the timing of broadcast flaming

Farmers are interested in producing popcorn under organic production systems and propane flaming could be a significant component of an integrated weed management program. The objective of this study was to collect baseline information on popcorn tolerance to broadcast flaming as influenced by propane dose and crop growth stage at the time of flaming. Field experiments were conducted at the Haskell Agricultural Laboratory of the University of Nebraska, Concord, NE in 2008 and 2009 using five propane doses (0, 13, 24, 44 and 85 kg ha(-1)) applied at the 2-leaf, 5-leaf and 7-leaf growth stages. Propane was applied using a custom-built research flamer driven at a constant speed of 6.4 km h(-1). Crop response to propane dose was described by log-logistic models on the basis of visual estimates of crop injury, yield components (plants m(-2), ears plant(-1), kernels cob(-1) and 100-kernel weight) and grain yield. Popcorn response to flaming was influenced by the crop growth stage and propane dose. Based on various parameters evaluated, popcorn flamed at the 5-leaf showed the highest tolerance while the 2-leaf was the most susceptible stage. The maximum yield reductions were 45%, 9% and 16% for the 2-leaf, 5-leaf and 7-leaf stages, respectively. In addition, propane doses that resulted in a 5% yield loss were 23 kg ha(-1) for the 2-leaf and 7-leaf and 30 kg ha(-1) for the 5-leaf stage. Flaming has a potential to be used effectively in organic popcorn production if properly used. (C) 2010 Elsevier Ltd. All rights reserved.

Factors affecting somatic cell counts and their relations with milk and milk constituent yield in buffaloes

Data concerning daily milk yield (MY), percentage of milk fat (%F), protein (%P), lactose (%LT), and total solids (%TS), and somatic cell counts (SCC) for a herd of 222 Murrah buffalo reared in the state of São Paulo, Brazil, were collected monthly from 1997 to 2000 in order to study the factors affecting SCC and their relation to milk production and constituents during lactation. SCC decreased in the second month of lactation and increased thereafter, up to the ninth month of lactation. The interaction of month of lactation x order of calving was significant. Mean MY observed during the first month of lactation was 6.87 kg, which increased to 7.65 kg during the second month, and then decreased until the ninth month of lactation (3.83 kg). During the different months of lactation, %F, %P, %LT, and %TS ranged from 6.28 to 8.38%, 4.05 to 4.59%, 4.96 to 5.34%, and 16.94 to 18.55%, respectively. Calving year, calving order, and order of month of lactation significantly affected MY, %F, %P, %LT, and %TS. The regression coefficients of transformed SCC on MY and %LT were negative and significant during all months of lactation, showing that milk and lactose yield decreased with increased transformed SCC, causing losses to buffalo milk producers.

Genetic variation in growth traits and yield of rubber trees (Hevea brasiliensis) growing in the Brazilian state of São Paulo

Analysis of variance and covariance was preformed on growth traits (stem girth, bark thickness, total height gain and rubber yield) of 22 open-pollinated progenies of the rubber tree Hevea brasiliensis from an Asian Hevea collection introduced to Agronomic Institute (Instituto Agronômico, Campinas, São Paulo, Brazil; IAC) in 1952. This progeny trial was replicated at three sites in São Paulo state and it was found that at three years from sowing there was statistically significant variation for girth, bark thickness, height and rubber yield. An individual test sites, values of individual plant heritability for girth ranged from ĥ i 2 = 0.36 to ĥ i 2 = 0.89 whereas values for heritability for progeny means ranged from ĥ i 2 = 0.77 to ĥ i 2 = 0.87. These moderate and high heritabilities suggest that a combination of progeny and within-progeny selection would be effective at increasing girth in this population at individual sites. Across sites, values of individual-plant heritability for girth ranged from ĥ i 2 = 0.36 to ĥ i 2 = 0.47, whereas values for heritability of progeny means girth ranged from ĥ x̄ 2 = 0.77 to ĥ x̄ 2 = 0.87. There were high positive genetic correlations between increased girth and bark thickness suggesting that breeding aimed at increasing girth would also increase bark thickness and possibly height. Copyright by the Brazilian Society of Genetics.

Impact of changes in the European Union import regimes for sugar, banana and rice on selected CARICOM countries

Includes bibliography

Root distribution, nutrient uptake, and yield of two upland rice cultivars under two water regimes

Upland rice (Oryza sativa L.) cultivation has been increasing in global importance due to the decreasing water availability for flood- irrigated rice. The use of sprinkler irrigation to supplement rainfall and the identification of cultivars more adapted to lower water availability could be effective alternatives for producing upland rice without yield losses while using less water. The objective of this field study was to evaluate the root distribution, plant nutrition, and grain yield of two drought tolerant upland rice cultivars under two water regimes in the Cerrado Region of Brazil during two growing seasons. The main plots were two water regimes (rainfed and sprinkler-irrigation plus rainfall). Subplots were two upland rice cultivars Carajás and IAC 201. Low water availability reduced root growth by 7% and grain yields were from 2644 to 4002 kg ha-1 on average for rainfed and sprinkler irrigation treatments, respectively. Carajás had a significantly better root distribution, nutrient uptake, and higher grain yield (3732 kg ha-1) compared with IAC 201 (2914 kg ha-1) averaged over two growing seasons and water regimes. There were no treatment interactions. Our results suggest that, even when cultivars with a higher tolerance to less water availability are used, using sprinkler irrigation to augment limited rainfall during dry periods may be a viable method to increase upland rice grain yields. © 2013 by the American Society of Agronomy.

Intercropping time of corn and palisadegrass or guineagrass affecting grain yield and forage production

Intercropping corn (Zea mays L.) with forages, such as palisadegrass {Urochloa brizantha (Hochst. ex A. rich.) r. D. Webster [syn. Brachiaria brizantha (Hochst. ex A. rich.) Stapf]} or guineagrass [Megathyrsus maximus (Jacq.) B. K. Simon & S. W. L. Jacobs (syn. Panicum maximum Jacq.)], provides large amounts of biomass for use as straw in no-tillage systems or as pasture. However, it is important to evaluate what time these forages have to be sown into corn systems to avoid reductions in both corn and forage production. This study, conducted for three growing seasons at Botucatu, Brazil, evaluated nutrient concentration and yield of corn as affected by time of forage intercropped as well as forage's dry matter production. our data showed that intercropping systems did not reduce leaf nutrient concentrations and grain yield of corn in relation to sole corn. The simultaneous intercropping of corn and guineagrass resulted in the lowest plant population (51, 200 plant ha-1), number of ears per plant (1.0), and, consequently, the lowest corn grain yield (9801 kg ha-1). Guineagrass seeded at the time of corn fertilizer topdressing resulted in the highest plant population (59, 400 plants ha-1), number of ears per plant (1.2), and corn grain yield (12, 077 kg ha-1). Forage production was highest when intercrop was done simultaneously. palisadegrass could be intercropped with corn both simultaneously or at topdressing fertilization stage. In contrast, it is recommended that guineagrass should only be intercropped with corn at topdressingfertilization. © Crop Science Society of America.

Xylo-oligosaccharides from lignocellulosic materials: Chemical structure, health benefits and production by chemical and enzymatic hydrolysis

Currently, there is worldwide interest in the technological use of agro-industrial residues as a renewable source of food and biofuels. Lignocellulosic materials (LCMs) are a rich source of cellulose and hemicellulose. Hemicellulose is rich in xylan, a polysaccharide used to develop technology for producing alcohol, xylose, xylitol and xylo-oligosaccharides (XOSs). The XOSs are unusual oligosaccharides whose main constituent is xylose linked by β 1-4 bonds. The XOS applications described in this paper highlight that they are considered soluble dietary fibers that have prebiotic activity, favoring the improvement of bowel functions and immune function and having antimicrobial and other health benefits. These effects open a new perspective on potential applications for animal production and human consumption. The raw materials that are rich in hemicellulose include sugar cane bagasse, corncobs, rice husks, olive pits, barley straw, tobacco stalk, cotton stalk, sunflower stalk and wheat straw. The XOS-yielding treatments that have been studied include acid hydrolysis, alkaline hydrolysis, auto-hydrolysis and enzymatic hydrolysis, but the breaking of bonds present in these compounds is relatively difficult and costly, thus limiting the production of XOS. To obviate this limitation, a thorough evaluation of the most convenient methods and the opportunities for innovation in this area is needed. Another challenge is the screening and taxonomy of microorganisms that produce the xylanolytic complex and enzymes and reaction mechanisms involved. Among the standing out microorganisms involved in lignocellulose degradation are Trichoderma harzianum, Cellulosimicrobium cellulans, Penicillium janczewskii, Penicillium echinulatu, Trichoderma reesei and Aspergillus awamori. The enzyme complex predominantly comprises endoxylanase and enzymes that remove hemicellulose side groups such as the acetyl group. The complex has low β-xylosidase activities because β-xylosidase stimulates the production of xylose instead of XOS; xylose, in turn, inhibits the enzymes that produce XOS. The enzymatic conversion of xylan in XOS is the preferred route for the food industries because of problems associated with chemical technologies (e.g., acid hydrolysis) due to the release of toxic and undesired products, such as furfural. The improvement of the bioprocess for XOS production and its benefits for several applications are discussed in this study. © 2012 Elsevier Ltd.