The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.

Water depth selection during foraging and efficiency in prey capture by the egrets Casmerodius albus and Egretta thula (Aves, Ardeidae) in an urban lagoon in Rio de Janeiro State, Brazil

This study aimed to evaluate the water depth selection during foraging, the efficiency in prey capture, and the food items captured by Casmerodius albus (Linnaeus, 1758) and Egretta thula (Molina, 1782). The work was conducted at an urban lagoon, Lagoa Rodrigo de Freitas, Rio de Janeiro. Four transects were made each month (two in the morning and two in the afternoon) for six months. When the birds were detected foraging, the water depth and the types of prey captured were recorded. There was no significant relationship between the foraging efficiencies of the two species. However, they differed in relation to the water depth when foraging, and also in the food items captured. Casmerodius albus captured mainly fishes while Egretta thula captured mainly invertebrates. The results suggest that the differences in water depth when foraging and the food items captured allow a differential use of the food resources available by C. albus and E. thula at Lagoa Rodrigo de Freitas.

Morphological development of Corydoras aff. paleatus (Siluriformes, Callichthyidae) and correlation with the emergence of motor and social behaviors

Here we examine major anatomical characteristics of Corydoras aff. paleatus (Jenyns, 1842) post-hatching development, in parallel with its neurobehavioral evolution. Eleutheroembryonic phase, 4.3-8.8 days post-fertilization (dpf); 4.3-6.4 mm standard length (SL) encompasses from hatching to transition to exogenous feeding. Protopterygiolarval phase (8.9-10.9 dpf; 6.5-6.7 mm SL) goes from feeding transition to the commencement of unpaired fin differentiation, which marks the start of pterygiolarval phase (11-33 dpf; 6.8-10.7 mm SL) defined by appearance of lepidotrichia in the dorsal part of the median finfold. This phase ends with the full detachment and differentiation of unpaired fins, events signaling the commencement of the juvenile period (34-60 dpf; 10.8-18.0 mm SL). Eleutheroembryonic phase focuses on hiding and differentiation of mechanosensory, chemosensory and central neural systems, crucial for supplying the larval period with efficient escape and nutrient detection-capture neurocircuits. Protopterygiolarval priorities include visual development and respiratory, digestive and hydrodynamic efficiencies. Pterygiolarval priorities change towards higher swimming efficacy, including carangiform and vertical swimming, necessary for the high social interaction typical of this species. At the end of the protopterygiolarval phase, simple resting and foraging aggregations are seen. Resting and foraging shoals grow in complexity and participant number during pterygiolarval phase, but particularly during juvenile period.

Evolutionary switch and genetic convergence on rbcL following the evolution of C4 photosynthesis.

Rubisco is responsible for the fixation of CO2 into organic compounds through photosynthesis and thus has a great agronomic importance. It is well established that this enzyme suffers from a slow catalysis, and its low specificity results into photorespiration, which is considered as an energy waste for the plant. However, natural variations exist, and some Rubisco lineages, such as in C4 plants, exhibit higher catalytic efficiencies coupled to lower specificities. These C4 kinetics could have evolved as an adaptation to the higher CO2 concentration present in C4 photosynthetic cells. In this study, using phylogenetic analyses on a large data set of C3 and C4 monocots, we showed that the rbcL gene, which encodes the large subunit of Rubisco, evolved under positive selection in independent C4 lineages. This confirms that selective pressures on Rubisco have been switched in C4 plants by the high CO2 environment prevailing in their photosynthetic cells. Eight rbcL codons evolving under positive selection in C4 clades were involved in parallel changes among the 23 independent monocot C4 lineages included in this study. These amino acids are potentially responsible for the C4 kinetics, and their identification opens new roads for human-directed Rubisco engineering. The introgression of C4-like high-efficiency Rubisco would strongly enhance C3 crop yields in the future CO2-enriched atmosphere.

Avaluació ambiental de la recollida de residus municipals de Sant Boi de Llobregat

La gestió dels residus municipals ha d’avançar cap a la sostenibilitat per tal de poder fer front al gran volum de residus que es generen actualment i no malmetre el medi ambient. Aquest fet motiva a l’elaboració d’aquest projecte que es centra en l’anàlisi del procés de recollida dels residus municipals. L’estudi realitza en primer lloc una avaluació ambiental de la recollida global i una avaluació ambiental específica de la recollida de la fracció Resta mitjançant el programari SIMUR (desenvolupada per l’Agència d’Ecologia Urbana de Barcelona). Amb aquesta eina de simulació de models de gestió de residus municipal es calcula el balanç de massa, el balanç energètic, el balanç d’emissions i el balanç econòmic del procés de recollida. La metodologia per al desenvolupament de la segona fase del projecte es basa en la realització de treball de camp per al disseny de taules descriptives dels circuits de recollida de la fracció Resta, que permeten comparar-los entre sí i aconseguir l’objectiu d’avaluar l’eficiència dels sistemes de recollida de càrrega lateral i posterior de la fracció. L’assoliment dels objectius permet fer-se una idea de l’estat actual de la recollida dels residus de Sant Boi, identificant-ne els punts forts i febles i plantejant propostes de millora encarades a aconseguir una futura generació i recollida de residus més respectuosa amb l’entorn.

Explaining High Economic Growth in Small Tourism Countries with a Dynamic General Equilibrium Model

This paper shows that tourism specialisation can help to explain the observed high growth rates of small countries. For this purpose, two models of growth and trade are constructed to represent the trade relations between two countries. One of the countries is large, rich, has an own source of sustained growth and produces a tradable capital good. The other is a small poor economy, which does not have an own engine of growth and produces tradable tourism services. The poor country exports tourism services to and imports capital goods from the rich economy. In one model tourism is a luxury good, while in the other the expenditure elasticity of tourism imports is unitary. Two main results are obtained. In the long run, the tourism country overcomes decreasing returns and permanently grows because its terms of trade continuously improve. Since the tourism sector is relatively less productive than the capital good sector, tourism services become relatively scarcer and hence more expensive than the capital good. Moreover, along the transition the growth rate of the tourism economy holds well above the one of the rich country for a long time. The growth rate differential between countries is particularly high when tourism is a luxury good. In this case, there is a faster increase in the tourism demand. As a result, investment of the small economy is boosted and its terms of trade highly improve.

Local consumption and territorial based accounting for CO2 Emissions

We examine the complications involved in attributing emissions at a sub-regional or local level. Speci cally, we look at how functional specialisation embedded within the metropolitan area can, via trade between sub-regions, create intra-metropolitan emissions interdependencies; and how this complicates environmental policy implementation in an analogous manner to international trade at the national level. For this purpose we use a 3-region emissions extended input-output model of the Glasgow metropolitan area (2 regions: city and surrounding suburban area) and the rest of Scotland. The model utilises data on commuter flows and household consumption to capture income and consumption flows across sub-regions. This enables a carbon attribution analysis at the sub-regional level, allowing us to shed light on the signi cant emissions interdependencies that can exist within metropolitan areas.

Factor Proportions and the Growth of World Trade

Most of the expansion of global trade during the last three decades has been of the North-South kind - between capital-abundant developed and labour-abundant developing countries. Based on this observation, I argue that the recent growth of world trade is best understood from a factor-proportions perspective. I present novel evidence documenting that differences in capital-labour ratios across countries have increased in the wake of two shocks to the global economy: i) the opening up of China and ii) financial globalisation and the resulting upstream capital flows towards capital-abundant regions. I analyse their impact on specialisation and the volume of trade in a dynamic model which combines factor-proportions trade in goods with international trade in financial assets. Calibrating this model, I find that it can account for 60% of world trade growth between 1980 and 2007. It is also capable of predicting international investment patterns which are consistent with the data

Switching between apparently redundant iron-uptake mechanisms benefits bacteria in changeable environments.

Bacteria often possess multiple siderophore-based iron uptake systems for scavenging this vital resource from their environment. However, some siderophores seem redundant, because they have limited iron-binding efficiency and are seldom expressed under iron limitation. Here, we investigate the conundrum of why selection does not eliminate this apparent redundancy. We focus on Pseudomonas aeruginosa, a bacterium that can produce two siderophores-the highly efficient but metabolically expensive pyoverdine, and the inefficient but metabolically cheap pyochelin. We found that the bacteria possess molecular mechanisms to phenotypically switch from mainly producing pyoverdine under severe iron limitation to mainly producing pyochelin when iron is only moderately limited. We further show that strains exclusively producing pyochelin grew significantly better than strains exclusively producing pyoverdine under moderate iron limitation, whereas the inverse was seen under severe iron limitation. This suggests that pyochelin is not redundant, but that switching between siderophore strategies might be beneficial to trade off efficiencies versus costs of siderophores. Indeed, simulations parameterized from our data confirmed that strains retaining the capacity to switch between siderophores significantly outcompeted strains defective for one or the other siderophore under fluctuating iron availabilities. Finally, we discuss how siderophore switching can be viewed as a form of collective decision-making, whereby a coordinated shift in behaviour at the group level emerges as a result of positive and negative feedback loops operating among individuals at the local scale.

Purification and activity standardisation of a (166m)Ho solution.

As part of a project to use the long-lived (T(1/2)=1200a) (166m)Ho as reference source in its reference ionisation chamber, IRA standardised a commercially acquired solution of this nuclide using the 4pibeta-gamma coincidence and 4pigamma (NaI) methods. The (166m)Ho solution supplied by Isotope Product Laboratories was measured to have about 5% Europium impurities (3% (154)Eu, 0.94% (152)Eu and 0.9% (155)Eu). Holmium had therefore to be separated from europium, and this was carried out by means of ion-exchange chromatography. The holmium fractions were collected without europium contamination: 162h long HPGe gamma measurements indicated no europium impurity (detection limits of 0.01% for (152)Eu and (154)Eu, and 0.03% for (155)Eu). The primary measurement of the purified (166m)Ho solution with the 4pi (PC) beta-gamma coincidence technique was carried out at three gamma energy settings: a window around the 184.4keV peak and gamma thresholds at 121.8 and 637.3keV. The results show very good self-consistency, and the activity concentration of the solution was evaluated to be 45.640+/-0.098kBq/g (0.21% with k=1). The activity concentration of this solution was also measured by integral counting with a well-type 5''x5'' NaI(Tl) detector and efficiencies computed by Monte Carlo simulations using the GEANT code. These measurements were mutually consistent, while the resulting weighted average of the 4pi NaI(Tl) method was found to agree within 0.15% with the result of the 4pibeta-gamma coincidence technique. An ampoule of this solution and the measured value of the concentration were submitted to the BIPM as a contribution to the Système International de Référence.

La définition des interfaces pour améliorer la qualité: l'exemple de l'anorexie en hospitalisation somatique [Defining interfaces to improve quality of care: the example of anorexia nervosa in acute somatic hospitalisation]

Specialisation in medicine requires multidisciplinary approaches, and hence coordination in collaborations of the different partners involved. These integrated approaches, sometimes called "disease management", fit particularly well to chronic diseases. Our institution introduced an integrated approach for taking care of the acute somatic hospitalisation of patients suffering from anorexia nervosa. Interfaces with the different partners were defined, specifying tasks, rights, and duties of each person, care givers or patients. This initiative allows now to identify any deviation occurring in the process of care or hole in the care system, so that it can be corrected and recurrence prevented. This model will be extended to other complex and multidisciplinary care processes and other services in our institution.

Some solutions to obtain very efficient separations in isocratic and gradient modes using small particles size and ultra-high pressure.

The UHPLC strategy which combines sub-2 microm porous particles and ultra-high pressure (>1000 bar) was investigated considering very high resolution criteria in both isocratic and gradient modes, with mobile phase temperatures between 30 and 90 degrees C. In isocratic mode, experimental conditions to reach the maximal efficiency were determined using the kinetic plot representation for DeltaP(max)=1000 bar. It has been first confirmed that the molecular weight of the compounds (MW) was a critical parameter which should be considered in the construction of such curves. With a MW around 1000 g mol(-1), efficiencies as high as 300,000 plates could be theoretically attained using UHPLC at 30 degrees C. By limiting the column length to 450 mm, the maximal plate count was around 100,000. In gradient mode, the longest column does not provide the maximal peak capacity for a given analysis time in UHPLC. This was attributed to the fact that peak capacity is not only related to the plate number but also to column dead time. Therefore, a compromise should be found and a 150 mm column should be preferentially selected for gradient lengths up to 60 min at 30 degrees C, while the columns coupled in series (3x 150 mm) were attractive only for t(grad)>250 min. Compared to 30 degrees C, peak capacities were increased by about 20-30% for a constant gradient length at 90 degrees C and gradient time decreased by 2-fold for an identical peak capacity.

Alternativas tecnológicas para la recuperación y valorización del nitrógeno presente en los residuos orgánicos

La conciencia de los problemas asociados a la gestión de los residuos orgánicos y el interés por las oportunidades de su recuperación y valorización han ido tomando importancia en los últimos años, tanto en el campo de las deyecciones ganaderas como en el sector de las aguas residuales. Consecuentemente, las combinaciones tecnológicas que permitan cerrar los ciclos de los nutrientes y la recuperación energética han adquirido mayor importancia en la investigación así como en las nuevas normativas sectoriales. En este contexto se sitúa el trabajo realizado durante el periodo becado (octubre 2010 - noviembre 2011). En una primera etapa de estudio bibliográfico se identificaron i) el aumento de la eficiencia en el uso del nitrógeno en la agricultura y en la ganadería, ii) la reutilización del nitrógeno en los mismos ecosistemas agrícolas y iii) el tratamiento de las deyecciones para redistribuir el nitrógeno a zonas con poca disponibilidad, como las tres direcciones principales hacia las cuales se está focalizando el interés del sector agrícola. Se puso en marcha una planta piloto de stripping y absorción para estudiar la posibilidad de recuperar y valorizar el amoniaco presente en los purines en forma de solución amoniacal para la industria de fertilizantes. Los resultados obtenidos evidenciaron el rol fundamental de las características iníciales del substrato en el rendimiento global del proceso. En particular, elevados contenidos en materia orgánica resultaron en bajas eficiencias y en elevadas contaminaciones del producto obtenido. Finalmente, considerando sus potenciales ventajas tanto en la gestión de los residuos ganaderos como de las aguas residuales y focalizándose en las perdidas de nitrógeno se estudió un sistema descentralizado de separación de orina instalado en un centro de investigación. Los resultados preliminares permitieron caracterizar los principales procesos que ocurren en el sistema e identificar las posibles líneas futuras de investigación.

Amplification efficiency: linking baseline and bias in the analysis of quantitative PCR data.

Despite the central role of quantitative PCR (qPCR) in the quantification of mRNA transcripts, most analyses of qPCR data are still delegated to the software that comes with the qPCR apparatus. This is especially true for the handling of the fluorescence baseline. This article shows that baseline estimation errors are directly reflected in the observed PCR efficiency values and are thus propagated exponentially in the estimated starting concentrations as well as 'fold-difference' results. Because of the unknown origin and kinetics of the baseline fluorescence, the fluorescence values monitored in the initial cycles of the PCR reaction cannot be used to estimate a useful baseline value. An algorithm that estimates the baseline by reconstructing the log-linear phase downward from the early plateau phase of the PCR reaction was developed and shown to lead to very reproducible PCR efficiency values. PCR efficiency values were determined per sample by fitting a regression line to a subset of data points in the log-linear phase. The variability, as well as the bias, in qPCR results was significantly reduced when the mean of these PCR efficiencies per amplicon was used in the calculation of an estimate of the starting concentration per sample.

An Adenovirus Vector Containing the Suicide Gene Thymidine Kinase for a Broad Application in Cancer Gene Therapy

Treatment of cancer using gene therapy is based on adding a property to the cell leading to its elimination. One possibility is the use of suicide genes that code for enzymes that transform a pro-drug into a cytotoxic product. The most extensively used is the herpes simplex virus thymidine kinase (TK) gene, followed by administration of the antiviral drug ganciclovir (GCV). The choice of the promoter to drive the transcription of a transgene is one of the determinants of a given transfer vector usefulness, as different promoters show different efficiencies depending on the target cell type. In the experiments presented here, we report the construction of a recombinant adenovirus carrying TK gene (Ad-TK) driven by three strong promoters (P CMV IE, SV40 and EN1) and its effectiveness in two cell types. Human HeLa and mouse CCR2 tumor cells were transduced with Ad-TK and efficiently killed after addition of GCV. We could detect two sizes of transcripts of TK gene, one derived from the close together P CMV IE/SV40 promoters and the other from the 1.5 Kb downstream EN1 promoter. The relative amounts of these transcripts were different in each cell type thus indicating a higher flexibility of this system.