The use of landforms to predict the variability of soil and orange attributes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial variability of infiltration and its relationship to some physical properties

Water infiltration into soil is one of the basic factors for estimating irrigation intensity according to the plants' requirements; this is aimed at avoiding problems of surface run-off and degradation. The purpose of the present investigation was to determine the spatial variation of infiltration and its relationship to some physical properties of soil by means of geostatistical techniques in Typic Plinthaquult soils having average texture and flat relief. A 113 point mesh was designned, having a regular distance of 10 m between points, samples being taken from 0 to 0.20 meters depth. Sand, silt and clay content, bulk density, macroporosity, microporosity and total porosity were determined. Infiltration tests were carried out in the field by means of a 15 cm diameter ring. Descriptive statistics and geostatistics were used for analysing the data. Infiltration, silt and microporosity data did not fit a normal distribution curve. Infiltration had high variability, having an average 36.03 mm h(-1). Total porosity was 56.73%, this being the only property that did not show spatial dependency. The smallest ranges were observed for bulk density, macroporosity and microporosity, having values of less than 40 m. The smallest degrees of spatial dependence were observed for infiltration, silt and clay, evidence also being shown of the influence of silt and clay on infiltration rate. Contour maps were constructed; fitting them to the semivariogram models, together with studying the correlations, led to establishing relationships between the properties.

Alteration of soil properties through a weathering sequence as evaluated by spectral reflectance

In the study of physical, chemical, and mineralogical data related to the weathering of soils and the quantification of their properties, remote sensing constitutes an important technique that, in addition to conventional analyses, can contribute to soil survey. The objectives of this research were to characterize and differentiate soils developed from basaltic rocks that occur in the Parana state, Brazil and to quantify soil properties based on their spectral reflectance. These observations were used to verify the relationship between the soils and reflectance with regard to weathering, organic matter (OM), and forms of Fe. From the least to the most weathered soil, we used a Typic Argiudoll (Reddish Brunizem), Rhodudalf (Terra Roxa Estruturada), and Rhodic Hapludox (Very Dark Red Latosol). The spectral reflectances between 400 and 2500 nm were obtained in the laboratory from soil samples collected at two depth increments, 0- to 20- and 40- to 60-cm, using an Infra Red Intelligent Spectroradiometer (IRIS). Correlation, regression, and discriminant estimates were used in analyzing the soil and spectral data. Results of this study indicated that soils could be separated at the soil-type level based on reflectance intensity in various absorption bands. Soil collected in the 40- to 60-cm depth appeared to have higher reflectance intensities than those from the 0- to 20-cm depth. Removal of OM from soil samples promoted higher reflectance intensity in the entire spectrum. Amorphous and crystalline Fe influenced reflectance differently. Weathering of basaltic soils was correlated with alterations in the reflectance intensities and absorption features of the spectral curves. Multivariate analysis demonstrated that this technique was efficient in the estimation of clay, silt, kaolinite, crystalline Fe, amorphous Fe, and Mg through the use of reflected energy of the soils.

Specific depth cone resistivity measurements to determine soil engineering properties

The University of British Columbia (UBC) began performing piezocone penetration tests (CPTU) with electrical resistivity measurements (RCPTU) in 1989. Since then, RCPTU research at UBC has focused on obtaining geo-environmental parameters such as fluid resistivity and soil engineering properties such as porosity and degree of saturation from measurements of bulk soil electrical resistivity using the empirical relationship proposed by Archie (1942). Within this framework, the paper illustrates and discusses important design and calibration issues for resistivity modules such as the use of isolated circuitry to achieve linear calibrations over large ranges of resistivity. The suitability of RCPTU measurements for determination of geo-environmental and geotechnical parameters are assessed using typical ranges of soil and groundwater properties and methods of isolating individual factors for study are discussed. Illustrative examples of RCPTU research efforts including the environmental characterization of mine tailings, delineation of saline water intrusions in fresh water aquifers and the quality control of geotechnical ground densification are presented throughout the text. It is shown that groundwater temperature and hence ion mobility is not significantly altered by frictional heat generated during piezocone penetration and that ratio-based approaches to monitoring soil porosity can be used to eliminate the requirement for extensive groundwater sampling programs. Lastly, it is shown that RCPTU measurements above the water table can only be made using resistivity modules that are stable over a large range of resistivities and that such measurements are the most difficult to interpret because of grain surface conduction effects and generally unknown fluid resistivities.

Environmental diagnosis in areas with different use and occupation using the perception of diverse biological activity

In Brazil, the degradation of soil and landscape by urban and agricultural frontiers expansion leads to the need for comprehensive studies and consider the diverse biological activities generated from different interventions in the landscape, becoming an instrument for assessing the impacts and the decision for its environmental management. The objective of this study was to evaluate the influence of different forms of occupation of the landscape, considering ecological elements and their interactions. The work was carried out on the Instituto Agronômico in the county of Jundiai, in the state of Sao Paulo, Brazil. The area under study has been subjected to different use and occupancy for a period of about 40 years. During this period the landscape has been transformed, with the current scenario can be classified as a degraded area mining; grassy area; Araucaria forest and pasture. These areas were evaluated by means of a transect, from which ten sampling sites were selected for the description of diverse biological activities, which included: evaluation and description of ground cover, identifying the presence of fungus and insect species. Furthermore, we evaluated in these points the pH, fertility and porosity of the topsoil (0-0.10 m). The results showed a variation of the elements analyzed and a relationship between the use and occupation of land in the different scenarios of the current landscape. The biological activity was more diverse in the Araucaria forest, reflected by the abundance of litter, higher content of organic matter and soil nutrients, demonstrating the effectiveness of the technique for assessing the level of degradation of the landscape used, which is expeditious and inexpensive.

Soil organic matter and physical attributes affected by crop rotation under no-till

Growing cover crops in systems under no tillage affects different pools of soil organic matter, and eventually soil physical attributes are modified. The objective of this study was to evaluate changes in soil organic matter and their relationship with soil physical attributes as affected by plant species grown in rotation with soybean [Glycine max (L.) Merr.] under no-till for 3 yr. Crop rotations included grain sorghum [Sorghum bicolor (L.) Moench], ruzigrass [Urochloa ruziziensis (R. Germ, and CM. Evard) Crins] and sorghum mixed with ruzigrass, all grown in fall/winter, followed by pearl millet [Pennisetum americanum (L.) Leeke], sunn hemp (Crotalaria juncea L.) and sorghum-sudangrass [S. bicolor × S. sudanense (Piper) Stapf] grown during the spring, plus a fallow check plot. Soybean was grown as the summer crop. Millet and sorghum-sudangrass cropped in spring showed higher root and shoot production as spring cropping. In fall/winter, sorghum mixed with ruzigrass yielded higher phytomass compared with sole cropping. Soil physical attributes and organic matter fractioning were positively affected by cropping millet and sorghum-sudangrass whereas intermediate effects were observed after sunn hemp. Maintaining fallow in spring had negative effects on soil organic matter and physical properties. Ruzigrass and sorghum mixed with ruzigrass cropped in fall/winter resulted in better soil quality. Spring cover crops were more efficient in changing soil bulk density, porosity, and aggregates down to 0 to 10 cm; on the other hand, fall/winter cropping showed significant effects on bulk density in the uppermost soil layer. Total C levels in soil were increased after a 3-yr rotation period due to poor initial physical conditions. Fractions of particulate organic C, microbial C, and C in macroaggregates were the most affected by crop rotations, and showed high relation with improved soil physical attributes (porosity, density, and aggregates larger than 2 mm). © Soil Science Society of America, All rights reserved.

Relationship between age of waste and natural electric potential generation in Sanitary Landfill

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Carbono orgânico no solo e sua relação com os compartimentos morfológicos representativos do estado de São Paulo

Pós-graduação em Geociências e Meio Ambiente - IGCE

Relação solo-paisagem e erodibilidade de solos no leste do estado do Maranhão

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Inter-relação entre geologia/relevo/solo/vegetação e atuação dos processos morfodinâmicos da unidade de paisagem serra do Japi: uma contribuição à conservação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estrutura de comunidades de peixes de igarapés de três pequenas bacias de drenagem sob uso de Agricultura Familiar no Nordeste Paraense

As espécies da ictiofauna podem se distribuir no espaço e no tempo de maneira organizada, seguindo um padrão que pode ser percebido pela associação ou agrupamento das espécies e pela sua relação com determinados habitats. O número reduzido de estudos e o pequeno conhecimento da fauna aquática na Amazônia resultam em sub-estimativas dos impactos na ictiofauna de igarapés. A Região Bragantina, no nordeste paraense, é tida como um exemplo de fronteira agrícola antiga na Amazônia. A agricultura familiar é expressiva na área, sendo as principais culturas milho, caupi e mandioca, e cultivos semi-perenes, como maracujá e pimenta-do-reino. Estas áreas de produção familiar constituem hoje importantes elementos da paisagem, podendo ocasionar à degradação dos solos e do ecossistema aquático. Nesse contexto, um estudo foi realizado nos anos de 2006 e 2007 em três igarapés situados nessa região: Cumaru, São João e Pachibá. Foram coletados 2.117 peixes, distribuídos em sete ordens, 13 famílias, 27 gêneros e 43 espécies. A espécie mais abundante em todas as amostras coletadas foi Hypessobrycon heterorhabudus, com 337 indivíduos, seguido por Bryconops caudomaculatus, com 326 indivíduos. A riqueza de espécies foi maior num trecho do Pachibá (IGPA-B), com 21 espécies. O Índice de Dominância de Simpson mostrou o valor mais alto no trecho B do igarapé Cumaru, enquanto o Índice de Diversidade de Shannon revelou que o IGP A-B possuiu a maior diversidade. Iguanodectes spirulus foi a espécie amostrada com mais constância, e ocorreu em 50% das amostras. A similaridade entre os ambientes revelou que a distribuição das espécies seguiu a um padrão longitudinal ao invés de um padrão geográfico. O uso da terra, em especial a agricultura familiar não influenciou na estrutura das comunidades de peixes, uma vez que a baixa intensificação dessa atividade ainda permite certa integralidade do ecossistema aquático. Porém, com uma maior intensificação e ampliação futura desses sistemas de produção não se sabe qual será a resposta desse ecossistema.

Trajetória socioambiental de Guarapuava: leituras da paisagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade espacial dos atributos do solo, erosão e suscetibilidade magnética de uma vertente em Gilbués, Pi

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Distribuição natural de espécies arbóreas em áreas com diferentes níveis de antropização visando integrar programa de conservação genética in situ

Pós-graduação em Agronomia - FEIS

Spatial variability structure of soil CO2 emission and soil attributes in a sugarcane area

Soil CO2 emission (F-CO2) is influenced by chemical, physical and biological factors that affect the production of CO2 in the soil and its transport to the atmosphere. F-CO2 varies in time and space depending on environmental conditions, including the management of the agricultural area. The aim of this study was to investigate the spatial variability structure of F-CO2 and soil attributes in a mechanically harvested sugarcane area (green harvest) using fractal dimension (D-F) derived from isotropic variograms at different scales (fractograms). F-CO2 showed an overall average of 1.51 mu mol CO2 m(-2) s(-1) and correlated significantly (P < 0.05) with soil physical attributes, such as soil bulk density, air-filled pore space, macroporosity and microporosity. Topologically significant DF values were obtained from the characterization of F-CO2 at medium and large scales (above 20 m), with values of 2.92 and 2.90, respectively. The variations in D-F with scales indicate that the spatial variability structure of F-CO2 was similar to that observed for soil temperature and total pore volume and was the inverse of that observed for other soil attributes, such as soil moisture, soil bulk density, microporosity, air-filled pore space, silt and clay content, pH, available phosphorus and the sum of bases. Thus, the spatial variability structure of F-CO2 presented a significant relationship with the spatial variability structure for most soil attributes, indicating the possibility of using fractograms as a tool to better describe the spatial dependence of variables along the scale. (C) 2014 Elsevier B.V. All rights reserved.