Determinants of prognostically relevant intracoronary electrocardiogram ST-segment shift during coronary balloon occlusion

The prognostic relevance of quantitative an intracoronary occlusive electrocardiographic (ECG) ST-segment shift and its determinants have not been investigated in humans. In 765 patients with chronic stable coronary artery disease, the following simultaneous quantitative measurements were obtained during a 1-minute coronary balloon occlusion: intracoronary ECG ST-segment shift (recorded by angioplasty guidewire), mean aortic pressure, mean distal coronary pressure, and mean central venous pressure (CVP). Collateral flow index (CFI) was calculated as follows: (mean distal coronary pressure minus CVP)/(mean aortic pressure minus CVP). During an average follow-up duration of 50 ± 34 months, the cumulative mortality rate from all causes was significantly lower in the group with an ST-segment shift <0.1 mV (n = 89) than in the group with an ST-segment shift ≥0.1 mV (n = 676, p = 0.0211). Factors independently related to intracoronary occlusive ECG ST-segment shift <0.1 mV (r(2) = 0.189, p <0.0001) were high CFI (p <0.0001), intracoronary occlusive RR interval (p = 0.0467), right coronary artery as the ischemic region (p <0.0001), and absence of arterial hypertension (p = 0.0132). "High" CFI according to receiver operating characteristics analysis was ≥0.217 (area under receiver operating characteristics curve 0.647, p <0.0001). In conclusion, absence of ECG ST-segment shift during brief coronary occlusion in patients with chronic coronary artery disease conveys a decreased mortality and is directly influenced by a well-developed collateral supply to the right versus left coronary ischemic region and by the absence of systemic hypertension in a patient's history.

The Process and Factors of Language Shift and Maintenance: Sociolinguistic Research into the Romanian Minority Community in Hungary

This study of the process of language shift and maintenance in the bilingual community of Romanians living in Hungary was based on 40 tape-recorded Romanian sociolinguistic interviews. These were transcribed into computerised form and provide an excellent source of sociolinguistic, contact linguistic and discourse analysis data, making it possible to show the effect of internal and external factors on the bilingual speech mode. The main topics considered were the choice of Romanian and Hungarian in community interactions, factors of language choice, code-switching: introlanguage and interlanguage, reasons for code-switching, the relationship between age and the frequency of code switching in the interview situation, and the unequal competition of minority and majority languages at school.

The Process and Factors of Language Shift and Maintenance: Sociolinguistic Research into the Romanian Minority Community in Hungary"

This study of the process of language shift and maintenance in the bilingual community of Romanians living in Hungary was based on 40 tape-recorded Romanian sociolinguistic interviews. These were transcribed into computerised form and provide an excellent source of sociolinguistic, contact linguistic and discourse analysis data, making it possible to show the effect of internal and external factors on the bilingual speech mode. The main topics considered were the choice of Romanian and Hungarian in community interactions, factors of language choice, code-switching: introlanguage and interlanguage, reasons for code-switching, the relationship between age and the frequency of code switching in the interview situation, and the unequal competition of minority and majority languages at school.

Analysis of patient flows for orthopedic procedures using small area analysis in Switzerland

BACKGROUND: In general cantons regulate and control the Swiss health service system; patient flows within and between cantons are thereby partially disregarded. This paper develops an alternative spatial model, based upon the construction of orthopedic hospital service areas (HSAOs), and introduces indices for the analysis of patient streams in order to identify areas, irrespective of canton, with diverse characteristics, importance, needs, or demands. METHODS: HSAOs were constructed using orthopedic discharge data. Patient streams between the HSAOs were analysed by calculating three indices: the localization index (% local residents discharged locally), the netindex (the ratio of discharges of nonlocal incoming residents to outgoing local residents), and the market share index (% of local resident discharges of all discharges in local hospitals). RESULTS: The 85 orthopedic HSAOs show a median localization index of 60.8%, a market share index of 75.1%, and 30% of HSAOs have a positive netindex. Insurance class of bed, admission type, and patient age are partially but significantly associated with those indicators. A trend to more centrally provided health services can be observed not only in large urban HSAOs such as Geneva, Bern, Basel, and Zurich, but also in HSAOs in mountain sport areas such as Sion, Davos, or St.Moritz. Furthermore, elderly and emergency patients are more frequently treated locally than younger people or those having elective procedures. CONCLUSION: The division of Switzerland into HSAOs provides an alternative spatial model for analysing and describing patient streams for health service utilization. Because this small area model allows more in-depth analysis of patient streams both within and between cantons, it may improve support and planning of resource allocation of in-patient care in the Swiss healthcare system.

The Dynamics of Secondary Forest Landscapes in the Lower Mekong Basin: A Regional-Scale Analysis

Secondary forests in the Lower Mekong Basin (LMB) are increasingly recognized as a valuable component of land cover, providing ecosystem services and benefits for local users. A large proportion of secondary forests in the LMB, especially in the uplands, are maintained by swidden cultivation. In order to assess the regional-scale status and dynamic trends of secondary forests in the LMB, an analysis of existing regional land cover data for 1993 and 1997 was carried out and forms the basis of this paper. To gain insight into the full range of dynamics affecting secondary forests beyond net-change rates, cross-tabulation matrix analyses were performed. The investigations revealed that secondary forests make up the largest share of forest cover in the LMB, with over 80% located in Laos and Cambodia. The deforestation rates for secondary forests are 3 times higher than the rates for other forest categories and account for two-thirds of the total deforestation. These dynamics are particularly pronounced in the less advanced countries of the LMB, especially in Laos, where national policies and the opening up of national economies seem to be the main drivers of further degradation and loss of secondary forests.

Individual patient data meta-analysis of diagnostic and prognostic studies in obstetrics, gynaecology and reproductive medicine

BACKGROUND: In clinical practice a diagnosis is based on a combination of clinical history, physical examination and additional diagnostic tests. At present, studies on diagnostic research often report the accuracy of tests without taking into account the information already known from history and examination. Due to this lack of information, together with variations in design and quality of studies, conventional meta-analyses based on these studies will not show the accuracy of the tests in real practice. By using individual patient data (IPD) to perform meta-analyses, the accuracy of tests can be assessed in relation to other patient characteristics and allows the development or evaluation of diagnostic algorithms for individual patients. In this study we will examine these potential benefits in four clinical diagnostic problems in the field of gynaecology, obstetrics and reproductive medicine. METHODS/DESIGN: Based on earlier systematic reviews for each of the four clinical problems, studies are considered for inclusion. The first authors of the included studies will be invited to participate and share their original data. After assessment of validity and completeness the acquired datasets are merged. Based on these data, a series of analyses will be performed, including a systematic comparison of the results of the IPD meta-analysis with those of a conventional meta-analysis, development of multivariable models for clinical history alone and for the combination of history, physical examination and relevant diagnostic tests and development of clinical prediction rules for the individual patients. These will be made accessible for clinicians. DISCUSSION: The use of IPD meta-analysis will allow evaluating accuracy of diagnostic tests in relation to other relevant information. Ultimately, this could increase the efficiency of the diagnostic work-up, e.g. by reducing the need for invasive tests and/or improving the accuracy of the diagnostic workup. This study will assess whether these benefits of IPD meta-analysis over conventional meta-analysis can be exploited and will provide a framework for future IPD meta-analyses in diagnostic and prognostic research.

A Combinatorial Approach to the Variable Selection in Multiple Linear Regression: Analysis of Selwood et al Data set -A Case Study.

A combinatorial protocol (CP) is introduced here to interface it with the multiple linear regression (MLR) for variable selection. The efficiency of CP-MLR is primarily based on the restriction of entry of correlated variables to the model development stage. It has been used for the analysis of Selwood et al data set [16], and the obtained models are compared with those reported from GFA [8] and MUSEUM [9] approaches. For this data set CP-MLR could identify three highly independent models (27, 28 and 31) with Q2 value in the range of 0.632-0.518. Also, these models are divergent and unique. Even though, the present study does not share any models with GFA [8], and MUSEUM [9] results, there are several descriptors common to all these studies, including the present one. Also a simulation is carried out on the same data set to explain the model formation in CP-MLR. The results demonstrate that the proposed method should be able to offer solutions to data sets with 50 to 60 descriptors in reasonable time frame. By carefully selecting the inter-parameter correlation cutoff values in CP-MLR one can identify divergent models and handle data sets larger than the present one without involving excessive computer time.

Semiotic Analysis in the Study of Social Work

Research and professional practices have the joint aim of re-structuring the preconceived notions of reality. They both want to gain the understanding about social reality. Social workers use their professional competence in order to grasp the reality of their clients, while researchers’ pursuit is to open the secrecies of the research material. Development and research are now so intertwined and inherent in almost all professional practices that making distinctions between practising, developing and researching has become difficult and in many aspects irrelevant. Moving towards research-based practices is possible and it is easily applied within the framework of the qualitative research approach (Dominelli 2005, 235; Humphries 2005, 280). Social work can be understood as acts and speech acts crisscrossing between social workers and clients. When trying to catch the verbal and non-verbal hints of each others’ behaviour, the actors have to do a lot of interpretations in a more or less uncertain mental landscape. Our point of departure is the idea that the study of social work practices requires tools which effectively reveal the internal complexity of social work (see, for example, Adams & Dominelli & Payne 2005, 294 – 295). The boom of qualitative research methodologies in recent decades is associated with much profound the rupture in humanities, which is called the linguistic turn (Rorty 1967). The idea that language is not transparently mediating our perceptions and thoughts about reality, but on the contrary it constitutes it was new and even confusing to many social scientists. Nowadays we have got used to read research reports which have applied different branches of discursive analyses or narratologic or semiotic approaches. Although differences are sophisticated between those orientations they share the idea of the predominance of language. Despite the lively research work of today’s social work and the research-minded atmosphere of social work practice, semiotics has rarely applied in social work research. However, social work as a communicative practice concerns symbols, metaphors and all kinds of the representative structures of language. Those items are at the core of semiotics, the science of signs, and the science which examines people using signs in their mutual interaction and their endeavours to make the sense of the world they live in, their semiosis. When thinking of the practice of social work and doing the research of it, a number of interpretational levels ought to be passed before reaching the research phase in social work. First of all, social workers have to interpret their clients’ situations, which will be recorded in the files. In some very rare cases those past situations will be reflected in discussions or perhaps interviews or put under the scrutiny of some researcher in the future. Each and every new observation adds its own flavour to the mixture of meanings. Social workers have combined their observations with previous experience and professional knowledge, furthermore, the situation on hand also influences the reactions. In addition, the interpretations made by social workers over the course of their daily working routines are never limited to being part of the personal process of the social worker, but are also always inherently cultural. The work aiming at social change is defined by the presence of an initial situation, a specific goal, and the means and ways of achieving it, which are – or which should be – agreed upon by the social worker and the client in situation which is unique and at the same time socially-driven. Because of the inherent plot-based nature of social work, the practices related to it can be analysed as stories (see Dominelli 2005, 234), given, of course, that they are signifying and told by someone. The research of the practices is concentrating on impressions, perceptions, judgements, accounts, documents etc. All these multifarious elements can be scrutinized as textual corpora, but not whatever textual material. In semiotic analysis, the material studied is characterised as verbal or textual and loaded with meanings. We present a contribution of research methodology, semiotic analysis, which has to our mind at least implicitly references to the social work practices. Our examples of semiotic interpretation have been picked up from our dissertations (Laine 2005; Saurama 2002). The data are official documents from the archives of a child welfare agency and transcriptions of the interviews of shelter employees. These data can be defined as stories told by the social workers of what they have seen and felt. The official documents present only fragmentations and they are often written in passive form. (Saurama 2002, 70.) The interviews carried out in the shelters can be described as stories where the narrators are more familiar and known. The material is characterised by the interaction between the interviewer and interviewee. The levels of the story and the telling of the story become apparent when interviews or documents are examined with the use of semiotic tools. The roots of semiotic interpretation can be found in three different branches; the American pragmatism, Saussurean linguistics in Paris and the so called formalism in Moscow and Tartu; however in this paper we are engaged with the so called Parisian School of semiology which prominent figure was A. J. Greimas. The Finnish sociologists Pekka Sulkunen and Jukka Törrönen (1997a; 1997b) have further developed the ideas of Greimas in their studies on socio-semiotics, and we lean on their ideas. In semiotics social reality is conceived as a relationship between subjects, observations, and interpretations and it is seen mediated by natural language which is the most common sign system among human beings (Mounin 1985; de Saussure 2006; Sebeok 1986). Signification is an act of associating an abstract context (signified) to some physical instrument (signifier). These two elements together form the basic concept, the “sign”, which never constitutes any kind of meaning alone. The meaning will be comprised in a distinction process where signs are being related to other signs. In this chain of signs, the meaning becomes diverged from reality. (Greimas 1980, 28; Potter 1996, 70; de Saussure 2006, 46-48.) One interpretative tool is to think of speech as a surface under which deep structures – i.e. values and norms – exist (Greimas & Courtes 1982; Greimas 1987). To our mind semiotics is very much about playing with two different levels of text: the syntagmatic surface which is more or less faithful to the grammar, and the paradigmatic, semantic structure of values and norms hidden in the deeper meanings of interpretations. Semiotic analysis deals precisely with the level of meaning which exists under the surface, but the only way to reach those meanings is through the textual level, the written or spoken text. That is why the tools are needed. In our studies, we have used the semiotic square and the actant analysis. The former is based on the distinctions and the categorisations of meanings, and the latter on opening the plotting of narratives in order to reach the value structures.

Ontologies and Methods for Interoperability of Engineering Analysis Models (EAMS) in an E-Design Environment

ABSTRACT ONTOLOGIES AND METHODS FOR INTEROPERABILITY OF ENGINEERING ANALYSIS MODELS (EAMS) IN AN E-DESIGN ENVIRONMENT SEPTEMBER 2007 NEELIMA KANURI, B.S., BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCES PILANI INDIA M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Ian Grosse Interoperability is the ability of two or more systems to exchange and reuse information efficiently. This thesis presents new techniques for interoperating engineering tools using ontologies as the basis for representing, visualizing, reasoning about, and securely exchanging abstract engineering knowledge between software systems. The specific engineering domain that is the primary focus of this report is the modeling knowledge associated with the development of engineering analysis models (EAMs). This abstract modeling knowledge has been used to support integration of analysis and optimization tools in iSIGHT FD , a commercial engineering environment. ANSYS , a commercial FEA tool, has been wrapped as an analysis service available inside of iSIGHT-FD. Engineering analysis modeling (EAM) ontology has been developed and instantiated to form a knowledge base for representing analysis modeling knowledge. The instances of the knowledge base are the analysis models of real world applications. To illustrate how abstract modeling knowledge can be exploited for useful purposes, a cantilever I-Beam design optimization problem has been used as a test bed proof-of-concept application. Two distinct finite element models of the I-beam are available to analyze a given beam design- a beam-element finite element model with potentially lower accuracy but significantly reduced computational costs and a high fidelity, high cost, shell-element finite element model. The goal is to obtain an optimized I-beam design at minimum computational expense. An intelligent KB tool was developed and implemented in FiPER . This tool reasons about the modeling knowledge to intelligently shift between the beam and the shell element models during an optimization process to select the best analysis model for a given optimization design state. In addition to improved interoperability and design optimization, methods are developed and presented that demonstrate the ability to operate on ontological knowledge bases to perform important engineering tasks. One such method is the automatic technical report generation method which converts the modeling knowledge associated with an analysis model to a flat technical report. The second method is a secure knowledge sharing method which allocates permissions to portions of knowledge to control knowledge access and sharing. Both the methods acting together enable recipient specific fine grain controlled knowledge viewing and sharing in an engineering workflow integration environment, such as iSIGHT-FD. These methods together play a very efficient role in reducing the large scale inefficiencies existing in current product design and development cycles due to poor knowledge sharing and reuse between people and software engineering tools. This work is a significant advance in both understanding and application of integration of knowledge in a distributed engineering design framework.

Finite element analysis for prediction of bone strength

Article preview View full access options BoneKEy Reports | Review Print Email Share/bookmark Finite element analysis for prediction of bone strength Philippe K Zysset, Enrico Dall'Ara, Peter Varga & Dieter H Pahr Affiliations Corresponding author BoneKEy Reports (2013) 2, Article number: 386 (2013) doi:10.1038/bonekey.2013.120 Received 03 January 2013 Accepted 25 June 2013 Published online 07 August 2013 Article tools Citation Reprints Rights & permissions Abstract Abstract• References• Author information Finite element (FE) analysis has been applied for the past 40 years to simulate the mechanical behavior of bone. Although several validation studies have been performed on specific anatomical sites and load cases, this study aims to review the predictability of human bone strength at the three major osteoporotic fracture sites quantified in recently completed in vitro studies at our former institute. Specifically, the performance of FE analysis based on clinical computer tomography (QCT) is compared with the ones of the current densitometric standards, bone mineral content, bone mineral density (BMD) and areal BMD (aBMD). Clinical fractures were produced in monotonic axial compression of the distal radii, vertebral sections and in side loading of the proximal femora. QCT-based FE models of the three bones were developed to simulate as closely as possible the boundary conditions of each experiment. For all sites, the FE methodology exhibited the lowest errors and the highest correlations in predicting the experimental bone strength. Likely due to the improved CT image resolution, the quality of the FE prediction in the peripheral skeleton using high-resolution peripheral CT was superior to that in the axial skeleton with whole-body QCT. Because of its projective and scalar nature, the performance of aBMD in predicting bone strength depended on loading mode and was significantly inferior to FE in axial compression of radial or vertebral sections but not significantly inferior to FE in side loading of the femur. Considering the cumulated evidence from the published validation studies, it is concluded that FE models provide the most reliable surrogates of bone strength at any of the three fracture sites.

GENETIC ANALYSIS OF THE FUNCTION OF THE DROSOPHILA DOUBLESEX-RELATED FACTOR dmrt93B

DMRT (Doublesex and Mab-3 related transcription factor) proteins generally associated with sexual differentiation in many organisms share a common DNA binding domain and are often expressed in reproductive tissues. Aside from doublesex, which is a central factor in the regulation of sex determination, Drosophila possesses three different dmrt genes that are of unknown function. Because the association with sexual differentiation and reproduction is not universal and some DMRT proteins have been found to play other developmental roles we chose to further characterize one of these Drosophila genes. We carried out genetic analysis of dmrt93B, which was previously found to be expressed sex-specifically in the developing somatic gonad and to affect testis morphogenesis in RNAi knockdowns. In order to disrupt this gene, the GAL4 yeast transcriptional activator followed by a polyadenylation signal was inserted after the dmrt93B start codon and introduced into the genome by homologous recombination. Analysis of the knock-in mutation as well as a small deletion removing all dmrt93B sequence demonstrate that loss of function causes partial lethality at the late pupal stage. Surprisingly, these mutations have no significant effect on gonad formation or male fertility. Analysis of GAL4-driven GFP reporter expression indicates that the dmrt93B promoter activity is highly specific to neurons in the suboesophageal and proventricular ganglion in larva and adult of both sexes suggesting a possible role in digestive tract function. Using the Capillary Feeder (CAFÉ) assay to measure daily food intake we find that reduction in this gene’s function leads to an increase in food consumption. These results suggest dmrt93 plays an important role in the formation or maintenance of neurons that affect feeding and support the idea that dmrt genes may not be restricted to roles in sexual differentiation.

Dynamic Chemical Shift Imaging for Image-Guided Thermal Therapy

Magnetic resonance temperature imaging (MRTI) is recognized as a noninvasive means to provide temperature imaging for guidance in thermal therapies. The most common method of estimating temperature changes in the body using MR is by measuring the water proton resonant frequency (PRF) shift. Calculation of the complex phase difference (CPD) is the method of choice for measuring the PRF indirectly since it facilitates temperature mapping with high spatiotemporal resolution. Chemical shift imaging (CSI) techniques can provide the PRF directly with high sensitivity to temperature changes while minimizing artifacts commonly seen in CPD techniques. However, CSI techniques are currently limited by poor spatiotemporal resolution. This research intends to develop and validate a CSI-based MRTI technique with intentional spectral undersampling which allows relaxed parameters to improve spatiotemporal resolution. An algorithm based on autoregressive moving average (ARMA) modeling is developed and validated to help overcome limitations of Fourier-based analysis allowing highly accurate and precise PRF estimates. From the determined acquisition parameters and ARMA modeling, robust maps of temperature using the k-means algorithm are generated and validated in laser treatments in ex vivo tissue. The use of non-PRF based measurements provided by the technique is also investigated to aid in the validation of thermal damage predicted by an Arrhenius rate dose model.

Analysis of Pressure Head-Flow Loops of Pulsatile Rotodynamic Blood Pumps

The clinical importance of pulsatility is a recurring topic of debate in mechanical circulatory support. Lack of pulsatility has been identified as a possible factor responsible for adverse events and has also demonstrated a role in myocardial perfusion and cardiac recovery. A commonly used method for restoring pulsatility with rotodynamic blood pumps (RBPs) is to modulate the speed profile, synchronized to the cardiac cycle. This introduces additional parameters that influence the (un)loading of the heart, including the timing (phase shift) between the native cardiac cycle and the pump pulses, and the amplitude of speed modulation. In this study, the impact of these parameters upon the heart-RBP interaction was examined in terms of the pressure head-flow (HQ) diagram. The measurements were conducted using a rotodynamic Deltastream DP2 pump in a validated hybrid mock circulation with baroreflex function. The pump was operated with a sinusoidal speed profile, synchronized to the native cardiac cycle. The simulated ventriculo-aortic cannulation showed that the level of (un)loading and the shape of the HQ loops strongly depend on the phase shift. The HQ loops displayed characteristic shapes depending on the phase shift. Increased contribution of native contraction (increased ventricular stroke work [WS ]) resulted in a broadening of the loops. It was found that the previously described linear relationship between WS and the area of the HQ loop for constant pump speeds becomes a family of linear relationships, whose slope depends on the phase shift.

A molecular analysis of the conditional defect in MuSVts 110 viral RNA splicing

Cells infected with MuSVts110 express a viral RNA which contains an inherent conditional defect in RNA splicing. It has been shown previously that splicing of the MuSVts110 primary transcript is essential to morphological transformation of 6m2 cells in vitro. A growth temperature of 33$\sp\circ$C is permissive for viral RNA splicing,and, consequently, 6m2 cells appear morphologically transformed at this temperature. However, 6m2 cells appear phenotypically normal when incubated at 39$\sp\circ$C, the non-permissive temperature for viral RNA splicing.^ After a shift from 39$\sp\circ$C to 33$\sp\circ$C, the coordinate splicing of previously synthesized and newly transcribed MuSVts110 RNA was achieved. By S1 nuclease analysis of total RNA isolated at various times, 5$\sp\prime$ splice site cleavage of the MuSVts110 transcript appeared to occur 60 minutes after the shift to 33$\sp\circ$C, and 30 minutes prior to detectable exon ligation. In addition, consistent with the permissive temperatures and the kinetic timeframe of viral RNA splicing after a shift to 33$\sp\circ$C, four temperature sensitive blockades to primer extension were identified 26-75 bases upstream of the 3$\sp\prime$ splice site. These blockades likely reflect four branchpoint sequences utilized in the formation of MuSVts110 lariat splicing-intermediates.^ The 54-5A4 cell line is a spontaneous revertant of 6m2 cells and appears transformed at all growth temperatures. Primer extension sequence analysis has shown that a five base deletion occurred at the 3$\sp\prime$ splice site in MuSVts110 RNA allowing the expression of a viral transforming protein in 54-5A4 in the absence of RNA splicing, whereas in the parental 6m2 cell line, a splicing event is necessary to generate a similar transforming protein. As a consequence of this deletion, splicing cannot occur and the formation of the four MuSVts110 branched-intermediates were not observed at any temperature in 54-5A4 cells. However, 5$\sp\prime$ splice site cleavage was still detected at 33$\sp\circ$C.^ Finally, we have investigated the role of the 1488 bp deletion which occurred in the generation of MuSVts110 in the activation of temperature sensitive viral RNA splicing. This deletion appears solely responsible for splice site activation. Whether intron size is the crucial factor in MuSVts110 RNA splicing or whether inhibitory sequences were removed by the deletion is currently unknown. (Abstract shortened with permission of author.) ^

Analysis of mutations in $\beta$-tubulin genes affecting tubulin stability and assembly

Cmd4 is a colcemid-sensitive CHO cell line that is temperature sensitive for growth and expresses an altered $\beta$-tubulin, $\beta\sb1$. One revertant of this cell line, D2, exhibits a further alteration in $\beta\sb1$ resulting in an acidic shift in its isoelectric point and a decrease in its molecular weight to 40 kD, as measured by two dimensional gel electrophoresis. This $\beta$-tubulin variant has been shown to be assembly-defective and unstable. Characterization of the mutant $\beta\sb1$ in D2 by high pressure liquid chromatography (HPLC) revealed the loss of methionine containing tryptic peptides 7,8,9, and 10. Southern analysis of the genomic DNA digested with several different restriction enzymes resulted in the appearance of new restriction fragments 250 base pairs shorter than the corresponding fragments from the wild-type $\beta\sb1$-tubulin gene. Northern analysis on mRNA from D2 revealed two new message products that also differed by 250 bases from the corresponding wild type $\beta$-tubulin transcripts. To precisely define the region of the alteration, cloning and sequencing of the mutant and wild type genomic $\beta$-tubulin genes were conducted. A size-selected EcoRI genomic library was prepared using the Stratagene lambda Zap II phage cloning system. Using subclones of CHO $\beta$-tubulin cDNA as probes, a 2.5 kb wild type clone and a 2.3 kb mutant clone were identified from this library. Each of these was shown to contain a portion of the gene extending from intron 3 through the end of the coding sequence in exon 4 and into the 3$\sp\prime$ untranslated region on the basis of alignment with the published human $\beta$-tubulin sequence. Sequencing of the mutant 2.3 kb clone revealed that the mutation is due to a 246 base pair internal deletion in exon 4 (base pair 756-1001) that encodes amino acids 253-334. This deletion results in the loss of a putative binding site for GTP which could potentially explain the phenotype of this mutant $\beta$-tubulin. Also sequence comparison of the 3$\sp\prime$ untranslated region between different species revealed the conservation of 200 base pairs with 78% homology. It is proposed that this region could play an important role in the regulation of $\beta$-tubulin gene expression. ^