A cunha do ciclo de fácies do Grupo Guatá (Eopermiano) na margem sub-aflorante do norte paranaense

A wedge facies cycle it‟s a body of sedimentary rock, bounded above and below by unconformity and which represents a transgressive-regressive cycle of deposition. This cycle is formed by the following succession of facies: non-marine (N), transitional-coarse texture, and marine-fine texture; The objective of this study have been members of the sandstones and Triumph Siderópolis, seconded by rare calcareous sandstones and very thin limb Paraguaçu. Through analysis of facies in wells testified by CPRM, it was possible to group on facies successions and set the standard stacking. The Triunfo Member consists of three cycles of facies, lithology whose standard indicates a vertical arrangement ''type'' tuning up, other words, a component sandy bottom in the form of '' box'', followed by components sandy-clayey and clayey-carbonaceous (1st and 2nd cycle) and / or shale and limestone (3rd cycle), represented by the base member Paraguaçu. The first cycle only occurs on NF-5 wells and NF-6 in the form of Onlap channel dug in post-Itararé group. The cycle II also reaches wells NF-4 and NF-3 to the north, while the cycle III reaches the southern area, well NF-9. The member Paraguaçu, well PP-25 is predominantly clay-síltico, also stand out limestones and sandstones. The limestones are not coastal marine organisms probably connected with the algae and cyanobacteria, the sandstones are fine-textured, very thin and coastal deposition environment. The member Siderópolis, well NF-2 consists of a sandstone fluvial-estuarine deployed in the valley section, and succeeded by sandstones and siltstones bioturbed, they have linked the transgression of the Fm. Palermo

Interpretação tectono-estratigráfica do reservatório Quissamã (Eo-meso-albiano) nos campos de Pampo, Bicudo e Bonito, Bacia de Campos

Hydrocarbon accumulations occur in marine carbonate reservoirs of Quissamã Formation (early to midlle Albian), southwest Campos Basin. We investigated Pampo, Bicudo and Bonito fields, in order to understand the tectono-structural framework of oncolite/bioclast coarse-grained calcarenite reservoir and the calcilutite-marl-shale sealing interval (Late Albian to Turonian). The database of eleven wells from those fields allowed to elaborate structural sections correlating the Macaé Group – both Quissamã reservoir and Outeiro seal, the latter corresponding to the tectonic deepening phase of basin evolution. Based on density and electric logs, it was prepared structural sections of the carbonate reservoirs with consequent identification of porous zones and oil-water contacts. An extensive 3-D seismic database (~300 Km2) allowed to map three reflectors which represent the limiting units of Macaé Group

Análises tectono-estratigráfica e faciológico-diagenética da coquina-reservatório Lagoa Feia, Campo de Linguado, Bacia de Campos

A tectono-stratigraphic study of bivalve coquina-reservoir of Linguado Field allowed to identify two trends of permoporosity development. The delineation of these depositional-diagenetic traps were made through structural and stratigrafic cross-sections and maps. It resulted in the identification of shelf-ramp systems (tilted to SSE), it tickens from 60 to 70 meters and ends against an antithetic fault. The main coquina is bounded by fine siliciclastic units, white clay (low Gamma Ray values) or shale (high Gamma Ray values) lithologies, influencing diagenesis of basal or top coquina limestones (cimented, non-porous). Also in the middle of coquina-reservoir the “clayer” material is also associated with cemented carbonates, with also compartimentalize the reservoir into two subzones. The coquina porosity of the subzones is taken from density-neutron logs, while induction log estimates permeabilities and fluid saturations. It’s noticed the porosity development into pairs, good one followed by a regular/poor one and vice versa. These pairs form verticals succession, pair cycles where porosity improves or decreases upwards. These two scales of pore heterogeneity impose strong layering to the reservoir, and influences fluid saturations, oil-water contacts and porosity cut-offs. In a cross-section with density and induction logs, it can be observed the porosity variation along the shelf-ramp coquina (between 3LI_0004_RJS e 3RJS_0157C_RJ), the porosity is better developed in a downdip direction in the case of the two shelf wells, and also be the three ramp wells. The southern west downdip, 3RJS_0157C_RJ well, has best porosity pairs-cycles; however, its lowest structural conditions favour water saturation. Therefore it is fundamental for reservoir fluid evaluation a cross-plot analysis of RHOB-NPHI and Induction logs

A importância da ciência e tecnologia para o desenvolvimento: um estudo de caso da indústria brasileira de química verde

The objective of the research is to map and analyze the investment, strategies of develop and prospects of green chemical industry in Brazil and show the fundamental importance of basic research and applied research in the development of this industry in recent years. The complementary objectives are: (i) to evaluate the role of the Brazilian government as a catalyst, encouraging the development of green chemistry industry through incentives, subsidies and ease in credit lines; ii) mapping of relationships between companies universities and public research institutes in the field of green chemistry; iii) verification of the strategies in the world stage green chemistry, the course of time; iv) the theoretical issues and national plans, and your practicable; v) continued investment in the area, with the worry of them being affected by any matter cyclical such as the discovery of a large deposit of shale gas in the United States and a technological development of oil extraction in Brazil and vi) the pace of R&D for basic and applied in the country with the passage of time

Sucessão estratigráfica e tratos de sistemas do Membro Romualdo, porção leste da Bacia do Araripe, nordeste do Brasil

Located in northeastern Brazil, the evolution of Araripe Basin has been associated with the fragmentation of Gondwana and opening of the South Atlantic. The Santana Formation belongs to the post-rift sequence of the basin and is characterized by the presence of laminated limestones in the lower portion (Mb. Crato), evaporite (Ipubi) and siliciclastics (Mb. Romualdo). For better understanding of the Romualdo's stratigraphy, depositional environments and tract of systems, a stratigraphic analysis was made with representative columnar sections of the unit. Sedimentary facies have been described in detail, as well as paleocurrents measured at different stratigraphic levels. It was found that the contact of Mb. Romualdo with the carbonate-evaporite section (Mbs. Crato and Ipubi) is a unconformity, evidenced by residual lags and thin layers of conglomerates above the contact. Above the conglomeratic levels predominate fine sandstones / medium interlayered with calciferous green shales. The percentage of shales increases towards the top, featuring retrogradational stacking culminating in layers of coquinas, excellent stratigraphic mark in the basin. Thin layers of coquins of gastropods comprising equinoids, located on the shale section, present in three sections marine deposits are associated with surfaces ravine. The upper section is characterized by recurrent facies of green shales, sandstones intercalated with sandstones progressively become more frequent towards the top of the unit, featuring the regressive part of the cycle. The sandstones present cross-stratification, often with mud clasts and clay layers in the foresets, and beddings of flaser type and wavy in heterolitic facies, suggesting the action of tidal currents. Paleocurrents measured in the sandstones show gaps with opposite flow directions outlining bipolar standards, which reinforce the interpretation of shallow marine environment influenced by tides during the sedimentation...

Simulation of Ground-Water Flow in the Cedar River Alluvial Aquifer Flow System, Cedar Rapids, Iowa Scientific

The Cedar River alluvial aquifer is the primary source of municipal water in the Cedar Rapids, Iowa, area. Since 1992, the U.S. Geological Survey, in cooperation with the City of Cedar Rapids, has investigated the hydrogeology and water quality of the Cedar River alluvial aquifer. This report describes a detailed analysis of the ground-water flow system in the alluvial aquifer, particularly near well field areas. The ground-water flow system in the Cedar Rapids area consists of two main components, the unconsolidated Quaternary deposits and the underlying carbonate bedrock that has a variable fracture density. Quaternary deposits consist of eolian sand, loess, alluvium, and glacial till. Devonian and Silurian bedrock aquifers overlie the Maquoketa Shale (Formation) of Ordovician age, a regional confining unit. Ground-water and surface-water data were collected during the study to better define the hydrogeology of the Cedar River alluvial aquifer and Devonian and Silurian aquifers. Stream stage and discharge, ground-water levels, and estimates of aquifer hydraulic properties were used to develop a conceptual ground-water flow model and to construct and calibrate a model of the flow system. This model was used to quantify the movement of water between the various components of the alluvial aquifer flow system and provide an improved understanding of the hydrology of the alluvial aquifer.

Whole-rock geochemistry and Sr-Nd isotopic composition of the pre-rift sequence of the Camamu Basin, northeastern Brazil

Whole-rock geochemistry, combined with Sr-Nd isotopic composition of pelitic sedimentary rocks, have been considered to be useful parameters to estimate not only their provenance but also to make inferences about their depositional environment as well as the weathering processes they have been through. The basal sedimentary units of the basins of the northeastern Brazilian continental margin, particularly those of the pre-rift sequence, have been subject of interest of studies based on chemical and isotopic data, since they lack fossil content to establish their age and, therefore, stratigraphic correlations are difficult. The major and trace element contents as well as Sr-Nd isotopic compositions of whole-rock shale samples from five outcrops attributed to the pre-rift supersequence of the Camamu Basin were analyzed with the purpose of characterizing and obtaining further information that would allow a better correlation between the sites studied. The geochemical data suggest that the rocks exposed in the studied outcrops are part of the same sedimentary unit and that they might be correlated to the Capianga Member of the Alianca Formation of the Reconcavo Basin, exposed to the north of the Camamu Basin. The chemical index of alteration (CIA) suggests conditions associated with a humid tropical/subtropical climate at the time of deposition. Nd isotopic compositions indicate provenance from the Paleoproterozoic rocks of the Sao Francisco craton. The results presented here, therefore, show that the combined use of chemical and isotopic analyses may be of great interest to characterize and correlate lithologically homogeneous clastic sedimentary sequences. (C) 2012 Elsevier Ltd. All rights reserved.

Petrographic approach to the study of organic microfossils from the Irati Subgroup (Permian, Parana Basin, Brazil)

Early diagenetic chert, infrequently exploited in Phanerozoic micropaleontology, was examined for organic-walled microfossils in petrographic thin sections of silicified dolostones from diverse levels and localities of the Assistencia Formation (Permian, Parana Basin) in the state of Sao Paulo, Brazil. In contrast to previous palynological studies of this formation, the use of thin sections allowed direct observation in three dimensions of common palynomorphs, as well as benthic microbial mats preserved in situ in various stages of their life cycles and degradation. As in palynological residues from the more wellknown shale of this formation, the chert contains wind-dispersed pollen grains and phytoclasts derived from terrestrial sources and planktonic cryptarchs (unornamented coccoidal unicellular or colonial palynomorphs). However, only in the chert is it possible to see much more delicate microfossils, such as abundant cyanobacteria of the in situ benthic microbiota as well as chlorophycean microalgae of the microphytoplankton. Post-depositional processes affecting the formation have destroyed all but the most resistant organic remains in the other lithologies, such that only rare, degraded pollen grains are seen in the unsilicified dolostone of the formation, and in the shale the vast majority of microfossils have been compacted to flattened disks. On the other hand, early silicification not only preserved organic remains at an incipient stage of decomposition but also impeded significant further degradation due to compaction, recrystallization, and oxidation. Thus, the petrographic study of such chert can complement traditional palynological investigations in Phanerozoic rocks by furnishing hitherto unavailable information, especially with regard to benthic organic microfossils and fragile organic-walled phytoplankton normally absent from organic residues. (C) 2011 Elsevier Ltd. All rights reserved.

Elemental composition evaluation in lichens collected in the industrial city of So Mateus Sul, Parana, Brazil

In this study, Canoparmelia texana lichenized fungi species was used as a passive biomonitor of the atmospheric pollution from the industrial city of So Mateus do Sul, PR, Brazil. Lichen samples collected from tree barks were cleaned, freeze-dried and analyzed by neutron activation analysis. Comparisons were made between the element concentrations obtained in lichens from this city and that from a clean area of Atlantic Forest in Intervales Park, SP. The high concentrations of elements As, Ca, Co, Cr, Fe, Hf, Sb, and Th found in lichens could be attributed to the emissions from a ceramic and an oil shale plants.

Gli idrocarburi non convenzionali nel futuro degli approvvigionamenti energetici : aspetti tecnici e economici

breve trattato sulle potenzialità presenti e future delle fonti fossili non convenzionali e della loro incidenza sugli scenari energetici futuri.

Geochemical Modeling and Analysis of the Frac Water Used in the Hydraulic Fracturing of the Marcellus Formation, Pennsylvania

The hydraulic fracturing of the Marcellus Formation creates a byproduct known as frac water. Five frac water samples were collected in Bradford County, PA. Inorganic chemical analysis, field parameters analysis, alkalinity titrations, total dissolved solids(TDS), total suspended solids (TSS), biological oxygen demand (BOD), and chemical oxygen demand (COD) were conducted on each sample to characterize frac water. A database of frac water chemistry results from across the state of Pennsylvania from multiple sources was compiled in order to provide the public and research communitywith an accurate characterization of frac water. Four geochemical models were created to model the reactions between frac water and the Marcellus Formation, Purcell Limestone, and the oil field brines presumed present in the formations. The average concentrations of chloride and TDS in the five frac water samples were 1.1 �± 0.5 x 105 mg/L (5.5X average seawater) and 140,000 mg/L (4X average seawater). BOD values for frac water immediately upon flow back were over 10X greater than the BOD of typical wastewater, but decreased into the range of typical wastewater after a short period of time. The COD of frac water decreases dramatically with an increase in elapsed time from flow back, but remain considerably higher than typicalwastewater. Different alkalinity calculation methods produced a range of alkalinity values for frac water: this result is most likely due to high concentrations of aliphatic acid anions present in the samples. Laboratory analyses indicate that the frac watercomposition is quite variable depending on the companies from which the water was collected, the geology of the local area, and number of fracturing jobs in which the frac water was used, but will require more treatment than typical wastewater regardless of theprecise composition of each sample. The geochemical models created suggest that the presence of organic complexes in an oil field brine and Marcellus Formation aid in the dissolution of ions such as bariumand strontium into the solution. Although equilibration reactions between the Marcellus Formation and the slickwater account for some of the final frac water composition, the predominant control of frac water composition appears to be the ratio of the mixture between the oil field brine and slickwater. The high concentration of barium in the frac water is likely due to the abundance of barite nodules in the Purcell Limestone, and the lack of sulfate in the frac water samples is due to the reducing, anoxic conditions in the earth's subsurface that allow for the degassing of H2S(g).

Transport of Hydraulic Fracturing Water and Wastes in the Susquehanna River Basin, Pennsylvania

The development of the Marcellus Shale gas play in Pennsylvania and the northeastern United States has resulted in significant amounts of water and wastes transported by truck over roadways. This study used geographic information systems (GIS) to quantify truck travel distances via both the preferred routes (minimum distance while also favoring higher-order roads) as well as, where available, the likely actual distances for freshwater and waste transport between pertinent locations (e. g., gas wells, treatment facilities, freshwater sources). Results show that truck travel distances in the Susquehanna River Basin are greater than those used in prior life-cycle assessments of tight shale gas. When compared to likely actual transport distances, if policies were instituted to constrain truck travel to the closest destination and higher-order roads, transport mileage reductions of 40-80% could be realized. Using reasonable assumptions of current practices, greenhouse gas (GHG) emissions associated with water and waste hauling were calculated to be 70-157 MT CO2 eq per gas well. Furthermore, empty so-called backhaul trips, such as to freshwater withdrawal sites or returning from deep well injection sites, were found to increase emissions by an additional 30%, underscoring the importance of including return trips in the analysis. The results should inform future life-cycle assessments of tight shale gases in managed watersheds and help local and regional governments plan for impacts of transportation on local infrastructure. (C) 2013 American Society of Civil Engineers.

A Natural Gas Severance Tax-An Economic Analysis

This study estimates the economic effects of a severance tax on the market for natural gas produced from shale sources using non-conventional extraction methods, such as horizontal drilling and fracking. Results suggest that a severance tax of 5% would increase the price of natural gas by as much as 3.82% and decrease gas extraction by an estimated 1.16% to a value of 9.52%. If applied to the Commonwealth of Pennsylvania in the United States, a 5% severance tax is estimated to raise between US$443 and $486 million per year in public revenue. The marginal deadweight loss associated with a 5% severance tax is estimated between 1.27% and 12.85% of the last dollar earned. The burden of this tax falls on both producers and consumers and depends upon the underlying assumptions made regarding the price responsiveness of consumers and producers. Under plausible assumptions, a family consuming 1000 MMcfs (approximate to 2.8 x 10(4) m(3)) per year of natural gas is estimated to pay an additional $100 per year after the implementation of a 5% severance tax.

Sonic log prediction in carbonates

This work is conducted to study the complications associated with the sonic log prediction in carbonate logs and to investigate the possible solutions to accurately predict the sonic logs in Traverse Limestone. Well logs from fifty different wells were analyzed to define the mineralogy of the Traverse Limestone by using conventional 4-mineral and 3-mineral identification approaches. We modified the conventional 3-mineral identification approach (that completely neglects the gamma ray response) to correct the shale effects on the basis of gamma ray log before employing the 3-mineral identification. This modification helped to get the meaningful insight of the data when a plot was made between DGA (dry grain density) and UMA (Photoelectric Volumetric Cross-section) with the characteristic ternary diagram of the quartz, calcite and dolomite. The results were then compared with the 4-mineral identification approach. Contour maps of the average mineral fractions present in the Traverse Limestone were prepared to see the basin wide mineralogy of Traverse Limestone. In the second part, sonic response of Traverse Limestone was predicted in fifty randomly distributed wells. We used the modified time average equation that accounts for the shale effects on the basis of gamma ray log, and used it to predict the sonic behavior from density porosity and average porosity. To account for the secondary porosity of dolomite, we subtracted the dolomitic fraction of clean porosity from the total porosity. The pseudo-sonic logs were then compared with the measured sonic logs on the root mean square (RMS) basis. Addition of dolomite correction in modified time average equation improved the results of sonic prediction from neutron porosity and average porosity. The results demonstrated that sonic logs could be predicted in carbonate rocks with a root mean square error of about 4μsec/ft. We also attempted the use of individual mineral components for sonic log prediction but the ambiguities in mineral fractions and in the sonic properties of the minerals limited the accuracy of the results.

A PETROPHYSICAL EVALUATION OF THE TRENTON-BLACK RIVER FORMATION OF THE MICHIGAN BASIN

This work is conducted to study the geological and petrophysical features of the Trenton- Black River limestone formation. Log curves, crossplots and mineral identification methods using well-log data are used to determine the components and analyze changes in lithology. Thirty-five wells from the Michigan Basin are used to define the mineralogy of Trenton-Black River limestone. Using the different responses of a few log curves, especially gamma-ray, resistivity and neutron porosity, the formation tops for the Utica shale, the Trenton limestone, the Black River limestone and the Prairie du Chien sandstone are identified to confirm earlier authors’ work and provide a basis for my further work. From these, an isopach map showing the thickness of Trenton-Black River formation is created, indicating that its maximum thickness lies in the eastern basin and decreases gradually to the west. In order to obtain more detailed lithological information about the limestone formations at the thirty-five wells, (a) neutron-density and neutron-sonic crossplots, (b) mineral identification methods, including the M-N plot, MID plot, ϱmaa vs. Umaa MID plot, and the PEF plot, and (c) a modified mineral identification technique are applied to these wells. From this, compositions of the Trenton-Black River formation can be divided into three different rock types: pure limestone, partially dolomitized limestone, and shaly limestone. Maps showing the fraction of dolomite and shale indicate their geographic distribution, with dolomite present more in the western and southwestern basin, and shale more common in the north-central basin. Mineral identification is an independent check on the distribution found from other authors, who found similar distributions based on core descriptions. The Thomas Stieber method of analysis is best suited to sand-shale sequences, interpreting hree different distributions of shale within sand, including dispersed, laminated and structural. Since this method is commonly applied in clastic rocks, my work using the Thomas Stieber method is new, as an attempt to apply this technique, developed for clastics, to carbonate rocks. Based on the original assumption and equations with a corresponding change to the Trenton-Black River formation, feasibility of using the Thomas Stieber method in carbonates is tested. A graphical display of gamma-ray versus density porosity, using the properties of clean carbonate and pure shale, suggests the presence of laminated shale in fourteen wells in this study. Combined with Wilson’s study (2001), it is safe to conclude that when shale occurs in the Trenton-Black River formation, it tends to be laminated shale.